Racer X Films: 1992 Honda CR250R Garage Build 

There's just something special about 90's 2 strokes, especially the CR.

no one will be bothering to rebuild today's fourstrokes in 26 years

Those Tusk parts are looking good! Awesome build guys.

Beautiful bike. Those early 90s Hondas were stunning. That thing sounds crisp! 2 stroke for life ✊

I would do unspeakable things to own this !!!

The best bike ever built

I miss my 1992 pink cr. Great bikes.

Wow that sounded good..Rode my buddies 1992 CR250 back in the day, had pipe and porting work...To this day that engine would still be incredible...Amazing engine....At the time I was racing the 92' CR125 and man it was fast too......Me and a friend I practiced with who was a former kawasaki team green racing in supercross switched bikes at his practice track...After a few laps we came in and shared thoughts and we both couldn't believe that the stock cr125 was so much faster than his fully modified KX125.....early 90's honda engines were amazing..

I would love to see the before picture... the after is amazing! Nice work

This is the best build you guys have done. Great job!!!

My 92 CR250 has been leaning against the wall in my shed for the last 14 years. Loved the motor on the 92!

Need more riding footage!

Wow what a machine. Amazing piece of kit. Stanton, JMB, McGrath going at it hard. Great racing days. I raced a CR 125 back then. Also with those rad red plastics. Loved that bike. 🚀🚀👍🏻

I would ride that bike. That is an insanely well done rebuild

Currently building a 94 cr 250, very addictive buying and sourcing parts

Sweet bike Ping. Belongs in a museum. Oh never mind, it's dirty now. 😀

Well done guys, great to see a classic bike brought back to life again, fantastic job.😃👍

That thing is gorgeous!

i love seeing these bikes come back to life! You should race the Chicken kx250 against this one! These were bikes i rode and was around as a teen and its so cool. If i could i would have a fleet of 90s mx bikes. My garage would be so bright with neon colors i wouldn't even need lights ;)

One of the best builds yet.

This video made me want to go rip my '95 CR250. Studs are all mounted up. New England ground is a little hard at the moment! I use my '95 as a "daily driver". JDay Off-road, NETRA, 6hr and 24 hour duo team races. It's a great bike. Had Dr.Stack @REPSuspension work his magic, and it's a great woods bike. I have three sets of suspension, two woods, and one I left stock. I like my '85 250r as well. If you can find one of these older CR's, grab it, you won't be sorry. Ride Red

Great channel and great bike! I love the Honda cr250! Just started to build a 2001 cr250 and I can not wait to get done so I can rip it!

'92-'01 Honda motors are awesome!

Nice work! That thing is mint!

Had one back n the day awesome machine👍🏻👍🏻

That suspension looks better than what hrc had then.

Please Please get this and the 1990 KX 250 out. Get Darryn Durham and Tyler Bereman or two other super talented guys and film a ten minute insane video. Track and Hills. Would be 🤘🤘🤘🤘🤘 Not saying ping isn’t talented.

Nice job ,restoring old bikes is almost like restoring an old musclecar .

That is a bike, that is a real Honda. Ping you looked like JMB so smooth, I was actually more an RJ then Stanton fan, weird as now I do sup Marvin on KTM, but that bike rests looks awesome, well done, cheers for sharing.

Ping looks normal again! Good move homey

Most beautiful mx bikes ever made,ride red !!!

Nice I have his autograph from Southwick Mass Nationals along with Rick Johnson Mike Larocco Jeff Stanton Jean Michael Boyle 1980’s and 90’s two stroke killer bikes!!!

One badass bike! You guys should do 97-99 cr 250s the bike that started the aluminum frame!

Eventually restore my 1993 CR 250 as you can see on my profile pic, even the young guys at the track thinks it cool. thanks for the video

Sounds and looks fantastic!

One of my favorite bikes!

Looks amazing!

One of the best yet :)

Needs pro honda/coors decals on the nose...100% inside rear of front fender...got to have the real camel supercross....that was the main one when I built my 94 McGrath replica in 94...Renthal chainwheels on swingarm...white front and side plates

This bike is so badass...

Ping, absolutely beautiful

This bike Rips I love it

Is this the holy grail CR

90's the best period!

Love it!! #parts&peaces.

It would be ace to see a pic of the bike before the resto work was carried out.

Amazing mate amazing

Beautiful Bike

Brake lines you can get from Galfer. I just bought some for mine.

WOW!!! Raced with you in Bozeman Montana in about 1994-5. You were fast. Coming off injury if I remember right? I'm just starting a 1994 CR250 restoration right now. This is a GREAT post. Any additional help you might provide to a guy you beat around the track 25 yrs ago would be helpful! :) Thx!

Now you need to go ride it in a lime soaked track.

92 Stanton was the champion ! 91 JMB was the champion !

these where the times ........

I see you're riding with a 101 on your back . It's that have many thousands of dollars you have in it? With a list like that I bet so. Beautiful time machine for sure 👍

JMB was such a badass

But Jeremy McGrath rode a 125 in 1992. His rookie year on the 250 was 1993.

I love it grate bike.

My favorit of all i owned

Wow beautiful rebuild! Where dit ju get the exhaust system, did u have to modify exhaust and the shorty? Greetings from sweden 🇸🇪

I have one of these (well the 125) in terms of suspension tuning in the manual theres no diagrams. It says 5 clicks out from full in. Does this mean all the way in clockwise and 5 clicks out anti-clockwise?

Look good clean shaven broski, and loved the bike, can I call Jay for some tips? I have a 93 cr125 in same clapped condition, also via la France!! Ha!

Sick...

Love it!!!

Great !!!!

I rode that sucker in 92 and ended up buying a YZ that year the cr was twitchy had terrible headshake and the forks sucked bad, in my opinion the yz was a better bike that year better suspension better low end and midrange and much more stable at high speed.

👌👌👌

Anyone have suggestions on wider footpegs for a ‘92 CR250? Thanks

How about Vive' la Micky Diamond? Apparently it was his bike?

Drooling

Nice !!

Mantap saya juga punya cr250 sayang nya mesin sudah soak

My dad claims he had micky diamonds 82 maico 250. Has an ama plastic band around the frame at the forks

Wow

Can anyone tell me what color powder to use for this year?

Is there a tread for these builds? I’d like to see a list where you can locate all the parts and plastics

im tryin to build my 92 CR rn im hoping i can find a place to help. i dont wanna blow every dollar on it but i really want it to be nice...

Does anybody know if I can take a 97 cr250 wheel set and slap it on a 92 cr250?

Did y'all get a new air box or did you just clean up the original one? if y'all got a new one where did you find it?

Thinking about my buddys and going through it. How much you think it cost you all in ?

Put the camel on there geeeezzz

You know it's a good bike. When you buy it off a volley 😂😂😂

Could u share info about how installed those foot pegs !

Ship of Theseus.

Hello, Can someone give me an address where there are seat covers in these original Neon Red? In Germany, the replica covers do not have these originals neon color.

can you do a raw vid of this? hit some jumps and whoops, thats what i want to hear!

Race at VMXDN in 2019 ?

And the "dislikes' are for what again?

Cool build. Just don't do a "Doug Henry Budds Creek" on it

I have a 92 that Was my first bike and I’m not fixing everything

This is how you are supposed to create a replica 1989 Honda CR250R: You take aluminum to create a replica 1989 Honda CR250R cylinder, which needs it's piston to get created from steel, which needs it's piston rings to get created from steel, which needs it's notches for it's piston rings to get cut out by a machine, and then it's piston, needs to get it's pin created from steel, which needs it's rod bearings to get created from steel, and you take aluminum to create a replica 1989 Honda CR250R crankcase, which needs it's transmission gears to get created from steel, which need their teeth to get carved out, which their teeth need their other transmission gear teeth to get carved out, and a replica 1989 Honda CR250R crankcase needs to get it's crank created from steel, which needs it's bearings to get created from steel, which needs it's notches for them to get cut out by a machine, and then a replica 1989 Honda CR250R needs it's rod to get created from steel, which needs it's rod bearings to get created from steel, and a replica 1989 Honda CR250R needs to get it's o-ring chain created from steel, which needs to get it's sprocket created from steel, which needs it get it's sprocket pin created from steel, and a replica 1989 Honda CR250R needs to get it's swing arm created from steel, which needs to get it's rim created from steel, which needs it's spokes to get created from steel, and it's swingarm needs to get it's wheel bearings created from steel, which needs it's notches to get cut out in their swingarm, and it's swingarm needs to get it's shock created from steel, which needs to get it's spring created from steel, and a 1989 Honda CR250R needs to get it's front fork created from steel, which needs to get it's handle bars created from steel, and a 1989 Honda CR250R needs to get it's frame created from steel, which needs to get it's motor mount bolt holes drilled out by a drill for their motor, and it's frame needs to get it's gas tank bolt mount holes drilled for it's gas tank, which needs to get created from plastic, which needs to get it's stickers created from plastic, and it's gas tank needs to get it's gas cap created from plastic, which needs it's notches to get cut out on it's gas tank, which needs it's bolts to get created from steel, which needs it's threads to get threaded by a tool, and a 1989 Honda CR250R has it's cylinder head's spark plug, and it's cylinder head's spark plug doesn't have it's piston, and a 1989 Honda CR250R needs to get it's carburator created from aluminum, which needs to get it's jets created from brass, which needs it's holes to get drilled out for it's gasoline to flow through it, and a 1989 Honda CR250R needs to get it's radiator created from aluminum, which needs to get it's bolts created from steel, which needs to get it's threads threaded by a tool, and a 1989 Honda CR250R needs to get it's header pipe created from steel.

I want that works connection sticker

Apico 2stroke festival . United kingdom

You can still buy a brand new fmf lol

92 jeff stanton was the champion not JMB

1 Thumbs down probably Bradshaw.

Unless y'all are paid guys 😂

I have rebuild a '93 CR250r . Tell me what you think : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZLG4wnJ2Bpk.html

There should be 7 mins of riding and 2 mins of talking in this vid

Beautiful Bike