Could you further expand on how you constructed your flip up passenger seat? Another video of the details would be amazing! I think it is awesome and would love to make something similar. Where to drill the holes/ screws used etc...???
Screw pack is linked up in the description and at 21:28 there is a picture/diagram of where the holes go and which screws I used in each hole. 1 - Cut the wood with a jigsaw by drawing a line around the seat while the seat is placed on a 1x8 For all the screws I just lined up the size of the screw with a drill bit that was the same size and then once I drilled the main hole I used a larger bit and drilled in reverse to create an inset for the screw head so they would be level with the wood 2 - Holes for the seat - for the holes to attach the seat to the wood I dusted some chalk in the holes of the seat and then laid it on top of the wood and slapped it so the chalk made marks on the wood were I needed to drill holes to attach the seat 3 - For the holes that you put the stabilizing screws you just place the wood piece on the back rack and drill upward through the holes in the rack (I would use a couple clamps if you have them to make sure it stays in one spot) 4 - Drill holes for the para cord and cut what you need and loop it through the wood 5 - Attach the seat to the wood with the screws 6 - Put the seat on the rack and make sure everything lines up and then attach the pipe clamps to create the hinge 7 - tie the paracord the correct distance that you want seat to lean back 8 - I screwed a small square piece of scrap wood to act as a spacer between my child seat and the wood base (you can see it in the video) so that the exposed screws wouldn't damage my child seat Done :-)
The quality of video and information in this made me think I was watching a video from a channel with thousands of subscribers! Nice work that has not gone unnoticed
Thanks for this!! I got a cheap electric assist bike off amazon a few years ago. It’s been my daily driver and even survived an accident. Ive been looking at nicer bikes and Ive settled on this one. So excited for it to arrive.
I keep going back to this video. Going to use your seat idea to move the passenger seat back and I liked all your suggestions. Thanks so much for this really useful video.
I know all about that. I did the trailer thing too and now both are too big for it. Living in a hilly area too and that can be more challenging than I'd want. It may cost a bit, but I'm guessing you can add gears to it assuming the frame is the same as the current Rad Runner 2. The RadWagon was a bit scary for me to ride with the kids. Just a bit long and heavy for me in the areas I ride. Also be careful, if there's even a slight slope to the side the center stand isn't secure. My kids almost fell. Luckily I was close by next to them when the whole bike was tilting over.
Thanks for making this video Ben! I continuously come back to it as I slowly upgrade my RadRunner. I have bought the front rack, a hafny mirror, & the Amazon basket + net. I bought the center container & you are right. It’s bulky and can be annoying, especially when I take my bike upstairs 😭But I like that I can put my phone down for the map & no one can see what I have in it.
That's so cool, glad it's been a good resource for you - I love making small upgrades and changing things around to customize it - Taking that bike upstairs is no fun
Thank you so much for this video! I build a similar hinged platform for my passenger seat (based off this video) about a year ago so that I could swap between it and my daughter's Yepp child seat quickly. She has since graduated to the passenger seat, so I need to get rid of the hinged plank system that I built. Contact me if you're interested! Free to a loving RadRunner owner.
Cool accessories. Pepper spray is a good one that most people probably never considered. I also have a smoke bomb attached to my bike. Similar to a dye pack concept at a bank - in case someone wants to rob me for my bike, they can ride around in a cloud of red smoke if they can see anything. 😂
Finally got kiddo #2 and looking to do this mod. Well done man! I'm bummed though bc I might be losing my backrest but will try to sandwhich it between the board and seat : )
Great video. Thank you for sharing. Pls show how you use the locks in a future video. I have the (2) New York Cinch (formly noose) for three bikes (Runner, Rover and mini step thru) and I struggled locking inside the the locking triangle on the Runner with the plastic passenger package guard. Thanks again.
Thanks! I normally use the Noose with my Rad Wagon, but when I've used it on the Runner I had the child seat on, so I just used the tubing right above the battery, basically below the bike seat - put the noose around the bike lock and then lock the padlock straight to the tubing.
Thanks for the review! I am going to buy my wife either the rad runner plus or the radwagon. Since you have basically the two I’m looking at which do you think would be best for her while riding our 3 year old? Do you think they would perform the same with a kid on the back? Do you think the wagon is too large? After this review I greatly value your opinion. Thanks so much!!!
Super helpful review and parts list. I would add a couple things: 1) Tribit StormBox Micro bluetooth speaker is smaller, cheaper, more portable than the JBL, and has shockingly good sound. 2) Controller / Display upgrade doubles your amps, which basically doubles your torque for going uphill. Not much added speed, but the extra torque is great for climbing, passing, and clearing busy intersections.
at first the shaft bracket you stated to buy did not go straight in the hole seat . but tomorrow i’ll hesitate on returning. tell me it slides and avoided seat post hole. I’ll give it That Yale try
Hey, love the video and thanks to tour reviews I just got my Rad Runner, it's simply great. Now, one question, does that seat with a back rest (the one you have in the wagon model) fits well the runner or do I need to have skills to adapt to the bike?
I think it would fit pretty easily, but haven't installed it myself so I can't say for sure - the runner has plenty of space on the cargo rack so I don't see why it wouldn't
How were you able to use the locking seat post but still have the quick release to adjust the height? I thought it was one or the other. That passenger seat idea is brilliant by the way! I have the Bern helmets too!
Thanks - yep, it's not a quick release for height, you have to have a hex tool to adjust it - I carry a multi tool on the bike at all times in case it's needed.
Super informative video! Question, where did you get the plexiglass safety fenders on the rear of your bike? I don’t want our little guy getting anything caught while riding.
@@BenLandersMedia I got that figured out now (I contacted Rad) that they are included with the passenger package. I was confused thinking it was a standard feature on the bike. All good! Thanks for your reply and great video!
There wasn't an option when I was looking, but I think I would have still gone with the Runner - of course gears and the display would be nice, but I don't find them that necessary for what I'm using it for. It really just depends on where your riding and what you want eg.) if you are going to upgrade and get the fenders, passenger pack, display anyway then it makes more sense to just go ahead and get the plus, if that stuff doesn't matter as much to you then the Runner is an awesome bike with a big payload and lots of versatility.
Usually I have a backpack in the Milk Crate and put it on top of the backpack and then bungee the cargo net on top of it - you could put it in the water bottle holder too, but it might bounce around a little so I like to stick with the backpack method because it's less likely to damage the speaker
It went together easily in less than an hour. ru-vid.comUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.
I'd take it to a bike shop if you can't figure it out after watching some YT videos, they can align it for you and explain how to do it as well so you can do it next time
Hi Ben, could you plz tell me where you got the front rack that the milk carton sits on and how you attached that rack to the bike/steering column. Thank you Mary
It really just depends on how steep the hill is (and also what your payload is - if I'm solo it's alot easier than if my wife is riding or even my oldest kid) , if it's a slight incline no problem, but if it's a steep hill like a 45 degree angle it's gonna be really tough - I can get through the hills in my area, but the steeper ones, I just normally avoid and find another route
Good review! Any ideas on safe seats for kids over 6? Mine is 7 and I don't want her to just sit on the regular passenger seat but the Yepp is for younger kids. Any ideas gratefully received.
@@BenLandersMedia thanks! I think I’m a touch over cautious! I worry the lack of suspension and no seatbelt/containment is unsafe. Indeed it’s probably fine and using the Yepp for another year is a good solution.
Bummer, I'm not sure about a good replacement since I haven't tested any alternatives myself, but if you google around you can probably find something similar
Is the Thule Yepp Maxi Child seat Radpower sells different from what you listed here? I have a 2 year old boy and he's on the bigger percentile. He's 34 pounds and 3.1 feet. Wondering how much time I can get out of it before he outgrew it?
It's the same one that Rad has, I'm not sure the max weight, but my daughter prefers riding on the passenger seat since she was about 5-6 over the Yepp. I wouldn't be comfortable with her doing it before then though
Do you have any suggestions for a radrunner plus set-up for putting a kid on the back that is 5 years old (too big for Yepp seat) that is similar to the caboose for the radwagon (I would like to get the radrunner over the radwagon if I can). Thanks!
Closest thing I've got is this amzn.to/3huk4Jm , but at that point you might as well just put the handle on and rock the passenger seat that comes with it. I have put my 6 year old daughter on the actual bike seat and ridden on the passenger seat with her in front of me (if you're short that won't work) There is probably something out there but I haven't seen it
I have an almost 6 year old and am considering a Rad, either the wagon or the runner plus. We need to ride up a pretty steep 1 mile hill though that has some traffic on it to get to school. My daughter is a bit timid so I want to have something secure for her on the back but I don’t know if I want the weight of the wagon for the hill as that seems to have more secure accessories for kids. Thoughts or suggestions?
If it's just one kid I would go with the Runner Plus, I love taking only one kid on my runner - it's way easier to navigate / more nimble than the wagon, but if you have another one you'll need the wagon :-)
Thanks for this video! My kid just hit the 50 lb mark the kids seat max is 40 lbs. do you feel a 7 year old can ride just on the cushion or should I get something else?
I think it really just depends where your riding and how busy the traffic is in the area. I have ridden with my 6 year old on the cushion around the neighborhood and on greenway trails, but wouldn't take her on big roads with heavy traffic She also like riding on the seat and then I sit on the pad with my arms around her - I probably wouldn't do this on heavy trafficed roads either though
Theres a shot of my bike with the seat tilted up and bike seat attached about 1.5 minutes into the video, so if that's what your talking about then yes
I'm not sure, the reason I got this one was so my wife and I could ride together, but if you're over the 300 limit you could try the rad wagon for a 350 limit
If money isn't an issue the Plus has more features and options, but if you are on a budget and want something more. simple then the 1 works great - especially if you live in a flatter area without a bunch of hills
Not sure, just a normal sheetrock anchor pack for hanging stuff around the house - basically something similar to this www.homedepot.com/p/E-Z-Ancor-Twist-N-Lock-50-lbs-Drywall-Anchors-with-Screws-25-Pack-25200/100133106
Yep - of course you can choose how much effort you want to put in by controlling the pedal assist level - the lower the level the more work you'll be doing.
How do people ride with out knowing how far you travel or how fast??? Can't do it and rad runner plus is kinda ugly and way over priced with no upgraded motor .it's a pity to me rad can't seem to get it together for me .thanks for the review
@@BenLandersMedia thank you not only that but most displays offer the unlock of the speed limit of 20 mph so i want it to also unlock that and at least go up to 28 mph .would that be possible with the upgraded display???thanks for the reply
Hiya Ben Fantastic review of this bike. t has so many possibilities. Think it will be perfect to get for me and my son! Would you be able to re send e the discount code please too! :)
😂 more like 300, but yea definitely want to budget for some upgrades (or don't if you don't care about any of them.) I felt part of the fun was customizing your ride with all the upgrades you want - I honestly felt I was being pretty conservative compared to a lot of the souped up bikes I've seen in the facebook group
