RadioLink AT9 + R9D Binding 

Nice job! I used this method to bind the R9D and R6D successfully! Thank you for your video.

Easy and fast, thanks man👍

Great video, more videos on the AT9 please

WOW Easy. thanks for sharing. Saludos desde México.

Thanks a lot !

Hi Sergio! Great vids, thx for the help! I have a (stupid) question. But please forgive me as a beginner :) In this video you power up the receiver on channel 3 you say. But that cannot be the normal way of powering the receiver? What connection do I use to power my receiver in normal flight? Chris

I'm new to RC's so I'm curious what you used to power the receiver for the bind. I have my radio/receiver arriving today so any help would be greatly appreciated. Thanks.

Sergio, do you know what or why on the RC main screen, the flashing lock and press button is for ? It seems that it is blocking me from using the menu . Thanx

Hi maybe you can help me, im using the same setup I had a crash broke back arm and cut antenna but now have replaced with new antenna but now I can't bind to reciever any help would be appreciated ?

Hi,your little set up you have to bind RX.The switch and wiring that's connected to a battery how do you make it and what do I need.cheers

Hi, İ have to the Radiolink AT9. I have bind it with r12dsm. the RSSI displayed on the Tx reads null for a few seconds then goes back to normal and this gets repeated every 30 sec or so. İs it normal ? Can i fly without problems?

Hi, would like to know what type of battery are u using for the receiver?

When you bind to the at9 does it create a new model or do you have to create a new model first. If you have to create a new model first how do you do that?

Hello there. I have a new AT10ii and R12DS system yet. I bought it for my plane with nitro engine. I do not have an ESC. (no esc). I have one 2s 7.4v battery and one UBEC 6v device. How can I connect this battery to the R12DS receiver. from which port I will connect. Do I need to use UBEC 6v? will the 2s7.4v battery work on my connection? I will connect the battery to which channel. I will connect to which channel the numbers are formed with red color. Would you mark me with a photo and attach it to the message? Please.

Im getting a red and purple light!!! I had to replace my TBS Powercube and it looks like I have to rebind the receiver again because Im just getting stoppable beeping.

So I hit the bind button. Turn on my at9 and the light stops blinking. The controller says it's paired. But yet I have no controls

do I need extra PPM encoder with R9D and Pixhawk? I can't find any online user manual for AT9 and Pixhawk binding

Question. When in S.Bus mode, are all remaining channels in S.Bus as well?

Thnx sir

Hi I want to use mine for a rc boat I have How would I enable switches eg I want to put a light on the boat How would I configure this I am only use to using this on a flight controller many thanks

Hi i have R6D but it's not switching to ppm. its always blinks red.

where did you find the manual for the r9d at? Could you post a link?

no that isnt it for me as a newbie , because i bought a rtf drone at helipal.com , the first one cames with Radiolink at9 and the drone settings was pretty installed . But my new one is a BnF , and i saw in the manuel all the settings but dont know how it works exactly in the At9 , i mean how iget acess to save all the settings. Thanks :)

Can you please do a delta wing setup? Radiolink at9s pro. Left and right wrong. Confused with this Radiolink

I cannot change the mode of r9d receiver. It doesn’t work on double click. What can I do?

Boas, Comprei um Radiolink at9 igual, mas estou com um problema a por-lo a funcionar com uma flip32, será que me podias ajudar?

how are these radios? like with range and features and all that?

i have same controller, but unfortunately i have lost the receiver, if i bought external R9D receiver will work ??? plz fastest answer guys i have to submit this project as soon as possible thank you

What battery do you have to power the receiver?

+Sergio Pereira I purchased the AT9 and I'm trying to figure out if I'm doing something wrong or if I have a DOA receiver. I have a CC3D with the input port set default and the main port to s bus. however when I connect the R9D, it doesn't light up at all. I tried it with using port 3 as you suggested in this video as well as the bottom s. bus port, but it just won't light up. Do I need to have a battery connected to the quad, or can the CC3D usb power it?

can you give me the binding video and the MKrons remote control program, uncle, because I have wanted to fly a rc plane for a long time, I have problems with the rc program

I tried to bind a second rx to the second model and also my first rx reacted

Is there a failsafe feature with the R9D?

Is it possible to link Radiolink At9 with FRSKY XSR ??

Being g anxiety whT the heck is SBUS AND WHAT DOES IT DO

would you recommend the at9 or at10

Whats the range with R9Ds receiver..

Can it be bound to other DSSS receivers? For example, walkera receivers? Thanks

PPM supports RD9 ??

Can I connect directly from receiver to motor dc??

Does this reciever have telemetary

how about the range?