RadioMaster Zorro (INITIAL SETUP, ELRS FIRMWARE FLASHING & FLIGHT!)

Подписаться 11 тыс.

Просмотров 36 тыс.

50% 1

Game Changer! RadioMaster Zorro ushers in a new generation of radio controllers. Zorro ExpressLRS Radio controller features review, initial setup, firmware flashing and flight. RadioMaster Zorro versions include internal ExpressLRS, 4-in-1 Multi-Module, and CC2500 module. Hall sensor gimbals, external nano module bay and internal battery charging too!
📑 00:00 Intro
📑 00:53 RadioMaster Zorro Features
📑 06:27 Look Inside the Zorro
📑 07:11 Zorro Internal Charging Demo
📑 08:38 Initial Setup & Calibration
📑 12:06 Model Setup
📑 13:49 Flash Zorro's Internal ExpressLRS Module & Bind Receiver
📑 18:59 Quick RadioMaster Zorro Test Flight
Please give this video a 👍& Subscribe
RESOURCES & PRODUCTS MENTIONED IN THIS VIDEO:
🌟RadioMaster Zorro (ELRS, 4-in-1 & CC2500)
Amzn amzn.to/32jCNmC
RM bit.ly/RadioMasterZorro
BG bit.ly/ZORROatBG
ZORRO ACCESSORIES
🛒RadioMaster Zorro Carry Case
Amzn amzn.to/33yTPho
RM bit.ly/RMZorroCarryCase
BG bit.ly/ZORRO_CarryCase_BG
🛒XT30 to JST Power Cable bit.ly/ZorroXT30toJSTPowerCable
🛒18350 Li Ion 900mah Batteries (RadioMaster)
RM bit.ly/RM18350Batts
BG bit.ly/RM18350Batts_BG
🛒ELRS EP1 Nano 2.4 Ghz Receiver
RM bit.ly/RM_ELRS_EP1Nano_2_4GhzRec
Amzn amzn.to/3tO9i7Y
BG bit.ly/EP1Nano2_4GhzBG
🛒 ELRS EP2 (Ceramic Antenna) Nano 2.4 Ghz Receiver
RM bit.ly/RM_ELRS_EP2Nano_2_4GhzRec
Amzn amzn.to/32q4oCQ
BG bit.ly/EP2Nano2_4GhzBG
🛒SanDisk 16GB SD Card amzn.to/3zXcW03
CHARGING POWER SUPPLIES
🛒100 Watt USB C Wall Charger Power Delivery amzn.to/332okLT
🛒ToolkitRC SC100 Cable amzn.to/3GqRUJR
🛒100 Watt Quick Charge (QC) & Power Delivery USB-C to USB-C Cable amzn.to/3qNQGD2
🛒 18350 Li Ion Battery Dual Charger amzn.to/3GQWiSE
🎥UAV Tech Latency & Jitter Testing bit.ly/35xlRuc
🎥TX16S Complete Setup bit.ly/3u5kqgP
🎥TX12 Complete Setup bit.ly/3KN2I7P
🔗EdgeTX Buddy buddy.edgetx.org/#/flash?vers...
🔗EdgeTX Using OpenTX Companion bit.ly/32DLIiW
Like to support your TMac FPV Channel? Thank You!🙏 Here's how!
Paypal - www.paypal.com/paypalme/tmacf...
Patreon - / tmacfpv
Radiomaster bit.ly/3FWuBYh or amzn.to/3eyrU2W
Airblade UAV bit.ly/2vxQttS
Banggood bit.ly/31p7JBz
BetaFPV bit.ly/3iG6ZeO
CycloneFPV bit.ly/3A7tPV6
FlexRC bit.ly/32NUjQe
HorusRC bit.ly/34mCOqD
Heli-Nation bit.ly/3mV71n6
HobbyCool bit.ly/3mVQ37X
👌 Recommended FPV Gear - tmacfpv.com/fpv-drone-gear/
👷TMac's Amazon Store (Build Supplies, Batteries, Drone Parts, etc.): www.amazon.com/shop/TMac
🌟 FAST TRACK FPV COURSE - Students' testimonials, course description & curriculum! TMacFPV.thinkific.com/courses...
🔗TMac's Build Supplies & Tips Page on TMac FPV Site: TMacFPV.com/micro-FPV-build-s...
⭐TMac FPV Website (FREE Resources & other GREAT STUFF!)⭐ TMacFPV.com/
🎥 FPV PLAYLISTS
RadioMaster TX16S bit.ly/TX16S_Playlist
Learn FPV bit.ly/LearnFPV_Playlist
HD Zero / Shark Byte bit.ly/TMacsSharkBytePlaylist
ExpressLRS Easy to Follow Setup - • ExpressLRS (EASY to FO...
OpenTX bit.ly/OpenTX_Playlist
Gyroflow - • Free Video Stabilizati...
TBS Crossfire bit.ly/TBSCrossfirePlaylist
This description contains affiliate links which allow you to conveniently find and purchase the items mentioned in this video at no additional cost to you. When you use them to make ANY purchase (not just the linked product) it enables TMac FPV to earn small fees which help support your TMac FPV channel. As an Amazon Associate I earn from qualifying purchases. Thanks for your support!
SAY HI & SUPPORT FUTURE FPV FUN!
👉 email: TMac@TMacFPV.com
👉 FAST TRACK FPV Facebook Page: / fasttrackfpv
👉 Instagram: / tmacfpvfun
👉 Facebook: / tmac.fpv
👉 Support Betaflight Development: Betaflight.com/
👉 Support OpenTX Development: www.open-tx.org/donations
👉 Support EdgeTX Development: opencollective.com/edgetx/donate
👉 Support Multi-module Development: www.multi-module.org/
👉 Support ExpressLRS Development: opencollective.com/expresslrs
👉 Support ArduPilot Development: bit.ly/ArduPilotSupportDevelo...
👉 Support Gyroflow Development: elvinchen.com/gyroflow/donate/
👉 Support FPV Freedom Coalition: FPVfc.org/
• RadioMaster Zorro (INI...
#radiomaster, #zorro, #zorroelrs, #elrs, #tmacfpv

Наука

Опубликовано:

13 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@KremerFPV 2 года назад

You won the best intro award! 😄

@TMacFPV 2 года назад

😂

@sircrashalotfpv144 2 года назад

Got mine today and thank you for this guide, help's me a lot.

@erdianari 2 года назад

Very nice and clear tutorial. This will help me a lot. Thank you

@andreaspap 2 года назад

The best intro for this radio by far. With this radio i am thinking to move to LRS for all my small quads. Thanks so much for this super review.

@TMacFPV 2 года назад

Thanks Andreas🙏Sure thing my friend 👍

@johna513 Год назад

Perfect video! Exactly what I needed to convince me to buy it 😀

@doodgeslagenmug Год назад

The intro is golden!

@douglasyoung3992 2 года назад

This helped as my zorro was challenging.

@heliharris69 2 года назад

Another great informative video......i have the Zorro TX ELRS starter model coming... which includes 3 RX`s...So this has proved very useful again...Thank you.

@TMacFPV 2 года назад

Congrats on your new Zorro ELRS Mick👍Think you're gonna love it!💪🤩

@pofotiouzois 2 года назад

Very nice review and guide. Thank you.

@TMacFPV 2 года назад

Sure thing!👍

@slogan9105 2 года назад

Nice work, very informative

@TMacFPV 2 года назад

Thanks!

@Mike0193Azul Год назад

Thank you

@m3chanist 2 года назад

An instant like just for the Zorro cameo alone, A sliced Z with the throttle stick even.

@HeliFlightRCU 2 года назад

Great intro!!

@TMacFPV 2 года назад

Z! 😂

@plop386 4 месяца назад

8:55 "need add somethign about elrs bind " nice polished manuel there

@TMacFPV 2 года назад

Has Zorro made it's mark?!? Birth of a new generation of radio controllers? Let me know in the comments below and make sure to check out the TMac FPV site at tmacfpv.com ! 👍After further testing, at 100mW output power, the Zorro remained operational for right at 2 hours with the 18350 Li Ion batteries reaching 6.1 volts at which time I powered the Zorro off to prevent damage to the batteries. In this video I had set the "low battery voltage" alarm to 6.7 volts based on "operating voltage" of 6.6v-8.4v listed in "Quick Start Guide." After conducting this test, I have now adjusted the "low battery voltage" alarm to 6.2 volts. BONUS material! here's how to turn your transmitter's momentary switches into "latching ON/OFF switches" ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7Y5h-iyWgzs.html

@matelslug1 2 года назад

can i use 2.4ghz nano elrs module on zorro radio or this radio can only use 900mhz nano elrs module ? is there a difference in 900mhz nano module and 2.4ghz nano module in terms of their connecting pins that zorro radio nano module bay can accept?? thanks.

@jamesceastep8874 2 года назад

Tmac: This was an outstanding video! Steps were done quickly, but with clear video, audio, and excellent clarity for all. I will use this protocol to set up EdgeTx on my Eachine TX16S and Radiomaster TX12. Since you mentioned that you have both of these other Radiomaster products, could you briefly compare both to your new Radiomaster Zorro? Your choices of buttons for mixing the ARM and BEEP functions make great sense to me. Could you comment how you would configure this (or either of my) other models to enable buddyboxing this radio as either the instructor or student? I'm guessing either of the right hand temporary buttons on the top or back of the Zorro make the best sense for this. Thank you for your exceptional care in covering all the features and installation steps! Do you feel that the Zorro is a sufficiently better small OpenTx or EdgeTx transmitter than the Radiomaster TX12 to warrent its purchase? Keep up your great work! - Jim

@gyuribumerang4639 2 года назад

thank you for your video! Which version of ELRS should I install on the RX module to match the new Zorro ELRS?

@ChrisHarmon1 Год назад

For anyone who runs into a COM error or platform io issue the fix for me was simply deleting the folder found at "C:\Users\*YourWindowsUserName*\.platformio" Be sure to delete the entire folder. If it doesn't show up on your C drive lookup how to show hidden folders on windows(I do this every windows format). I believe my issue stemmed from conflicting previous versions of platformio that were downloaded months ago during my fight with some 3d printer code/VSCode. For COM errors I suggest installing the ST drivers(easiest way to find the drivers for new FPV guys is install betaflight configurator and the files are on front page of app).

@astrobat81z45 2 года назад

Great tut helped me a lot,got it updated,but power output of TX is locked to 10mW no other options(10mW CE Limit)any sugestions how to fix it?

@kurtzFPV 2 года назад

Great review as always and the intro was perfect. Do you have an edgetx video on the tx16s coming down the pike? I want to make the switch but am concerned about losing my inav Lua and some of the great widgets you've shown how to set up on this channel.

@TMacFPV 2 года назад

I'll see what I can do in the next couple of weeks Bryan

@IsThatYouSimon Год назад

Thanks for this video. I didn't understand everything (I'm French) but may be you could help me. My Zorro is not recognized by my Mac M1Max when i try to use it on simulators. Any explanations ? Thanks !

@altitudefpvphotography4616 Год назад

What model Zorro would I want if I want the radio to have the same options as my Jumper t16 pro 4n1 with external Jr bay ?

@wehttamak 8 месяцев назад

i have an zorro 4 in 1 radio i notice on the radio master website there is a elrs module , is there a video showing how i can install/replace the 4 in 1??

@juneloko619 2 года назад

Can u make a video on how to install amber sound pack plz

@lungomaburfpv1425 Год назад

Why is Zorro ELRS connection with EP1 in Model Selection 01, 02, 03 and more? I have: Model 01 = drone, Model 02 = Reptil Wing, Model 03 = SU27 (Those different setting). My mind, 3 ea model with 3 ea EP1 and pluging lipo can be flight together at some time by Model 01 Zorro.

@TommyTester 2 года назад

Great video! Where is the best place to order the Zorro and why? Direct from Radiomaster, BG, or a shop in the USA. Thanks!

@TMacFPV 2 года назад

Hey Tommy! I got mine direct from RadioMaster (there's links to the Zorro in this videos description). Or, if you want to wait, pre-order from a shop in U.S. and it'll ship when the shop gets them in. I myself have never pre-ordered from a U.S. shop. I've just waited until they got the stock in to place the order. I usu6 go through RDQ, DefianceRC, GetFPV (east coast) or Pyridrine (west coast)

@TommyTester 2 года назад

@@TMacFPV OK thanks. I appreciate all you do!

@reconchamp Год назад

I just got a radiomaster zorro 4in1 with TBS crossfire nano external module. I just bought the geprc rocket plus tbs crossfire edition as well. I updated the external module, then paired it with reciever on drone. Flashing blue light (means update now going to drone module) then now solid green on drone and remote. I know remote is paired because it says telemetry lost if drone is powered off. Now, I have solid green lights on both drone and remote external module. Both are paired. But when trying to get stick feedback on betaflight or receiver feedback at all, nothing. I move drone around with my hand on 3D model betaflight first page, drone moves. But nothing on reciever tab. I tried serial uart, crsf module. I tried disabling abc filter on zorro remote settings (tells you to do that on betaflight settings). I need help please. Its got to be something in betaflight is wrong settings wise. I looked up youtube videos for days. Can never find a tbs crossfire setup on zorro, only elrs. Thank you in advance!

@fpvpilot5818 11 месяцев назад

Do we need external elrs module for zorro 4in1?

@michaelhedges41070 2 года назад

Can you tell me how to get it to display the time and date thanks

@SeeFPv-qm6ie 2 года назад

does it have Lua script in the radio already 🤔

@ginginthing Год назад

Nice video. I'm a newb and don't understand many of the acronyms you mention. I know there's a lot to learn. On 9:05, Channel order (??) what is AETR? I can change to differnent ones. I don't know what any of them mean so where do I find the meaning of the different orders? On 13:00, why are you setting up a beeper on chn 7 on a momentary switch and when or where is this used? Thx for any response.

@TMacFPV Год назад

Channel order at www.multi-module.org/using-the-module/channel-order . Beeper is used to locate quadcopter when it has "ventured off unexpectedly." Momentary switch is normally used for it so it's not activated for a long period of time which becomes both annoying and wears out the beeper battery (perhaps before you find the quadcopter). Hope this helps. Happy flying & Clear Skies!

@ginginthing Год назад

@@TMacFPV Thx so much for the info. Yes. Location beeper. Never entered my mind like most stuff. Will use the link on chnl orders. I just subscribed to your chnl.

@TMacFPV Год назад

@@ginginthing You're quite welcome 👍

@fv_shorts8681 Год назад

When I try flashing it there is always the error "could not open port 'COM5': FileNotFoundError" already had that? Do you have some advice?

@55amps 2 года назад

I have external elrs ? Is it the same process?

@riyazmailmohammed Год назад

Zorro can bind traxxas receiver TQi?

@TeezyThaKidd Год назад

i wish there were a straightforward way to downgrade to older ELRS versions (i.e., v3 to v2). ended up buying a receiver module i'm hoping i can flash to v2. i was able to get my zorro up to ELRS 3.1.2 without a problem. i can now fly all my drones except one, the latter of which only supports ELRS v2... rip. either i use the module or replace the rx in the quad (betafpv cetus x)

@Tethmes Год назад

What do I do if the flash to the zorro failed? Kinda freaking that I just bricked it or something...

@saggyballsfpv 2 года назад

Do the roll, pitch, and yaw all have adjustable gimbal spring tension?

@hurricane_vr868 Год назад

I know is a little late to answer but yes

@ntorres1966 2 года назад

T Mac. I have elrs on beta fpv drones and I can’t load the latest version of elrs. Do you have a solution for this.

@TMacFPV 2 года назад

I just use the instructions from the ExpressLRS site www.expresslrs.org/2.0/quick-start/receivers/rx-betafpv2400/ . Haven't ever had an issue with it myself. Try WIFI method

@evgenyyurkevich9465 10 месяцев назад

I was able to connect it to my drone but I can’t arm it

@anthonynicholson5725 2 года назад

Any ideas on why my pc will recognize the zorro but with errors? Driver and com errors….and any idea on how to fix it? Thanks

@TMacFPV 2 года назад

Try ImpulseRC Driver Fixer or Zadig perhaps? Sounds like a driver issue. You're using the USB port at top of radio correct? Not the bottom charge port? If you continue to have issues, I've found RadioMaster Support outstanding. Keep in mind, their timezones I believe is GMT+10 www.radiomasterrc.com/pages/contact

@k1ortia 2 года назад

Can this bind to the Futaba S-FHSS Protocol? cheers

@TMacFPV 2 года назад

The Zorro version that comes with the internal 4-in-1 mult-protocol module can

@johngreen5837 Год назад

My zorro failed the bind and flash

@Dcpulley 2 года назад

Will the module adapter work for this so we can use full size R9M module?

@TMacFPV 2 года назад

I'm not familiar with "the module adapter" you're referring to. The Zorro has a nano module bay

@Sylo2Nice 2 года назад

@@TMacFPV he means the one that use to be sold for the frsky xlite radios. I think they should be able to work. It's a part they made to fit the full crossfire module in the nano size one of the xlite

@jaxonfpv 2 года назад

the intro LMAOOOOOO

@JoelTGM Год назад

wow this is way more complicated than i could ever imagine. getting into fpv drones i thought i researched everything, got it all sitting infront of me on my coffee table. now i have no idea what is going on. trying to flash my radio whatever that means and after 5 minutes of loading it fails. rip.

@Onepunchfpv 8 месяцев назад

❤b❤

@billyd78 2 года назад

Admit it, you really are Zorro aren't you!

@TMacFPV 2 года назад

😉

@maximeg3659 8 месяцев назад

packet rate is too high (left at 500hz) 150-250Hz is better, otherwise range is too weak IMO

@dandahermitseals1687 2 года назад

Nearly 4000 ft in the mountains. Waaaay off grid. No roads power poles mail servuce utilities n best of all---- no neighbors.haha

@TMacFPV 2 года назад

Nice flyin'!💪😁

@grim-upnorth 2 года назад

Radiomaster item listing states SD card and batteries are not included. Seems as though the reviewers got some extra goodies that us normies won't get.

@TMacFPV 2 года назад

SD card is included. Batteries are not included

@chezfpv9139 2 года назад

@@TMacFPV Goodventuredrones has option with batteries included

@jaxonfpv 2 года назад

theyre all out of stock let me buy yours lol

@TMacFPV 2 года назад

😂

@jaxonfpv 2 года назад

@@TMacFPV ill pay $69.99

@0utdoor_advent 9 месяцев назад

you sound like Obama

@billyd78 2 года назад

My win10 computer won't load any drivers for the zorro serial port (debug) any ideas?

@TMacFPV 2 года назад

Perhaps try this? www.st.com/en/development-tools/stsw-stm32102.html or www.multirotorguide.com/guide/opentx-radio-not-working-in-simulator-issue-fix/

@billyd78 2 года назад

Nevermind had to manually add the stm32 virtual com port drivers.