Finally! Quick Set Up For ExpressLRS! How To Wire, Flash, & Program Your ELRS Radio & Receiver!

Подписаться 19 тыс.

Просмотров 50 тыс.

50% 1

In today's video, we are going to quickly set up ELRS. We will flash our radio with our binding phrase, wire and flash our receiver with our binding phrase, then pair the two and set it up in Betaflight.
▶️▶️Links Mentioned In Video:
▶️▶️How To Set Up Switches:
✔️✔️ • How to set up Arm/Disa...
▶️▶️Download ExpressLRS
✔️✔️github.com/ExpressLRS/Express...
▶️▶️Link To Repair Partitions:
✔️✔️github.com/ExpressLRS/reparti...
▶️The One & Only Moxy Build:
✔️ • Let's Build The All Ne...
▶️Let's Build A Master Drone:
✔️ • Let's Build a Master D...
▶️My Review of The Speedybee V3 Stack:
✔️ • All New SpeedyBee V3 S...
▶️Aikon F7 AIO 60 AMP:
✔️usa.banggood.com/custlink/KmD...
▶️Let's Build It Playlist by DrainMan:
✔️ • Let's Build It !!
▶️Everything To Know About LED's:
✔️ • Betaflight LED's !! Ev...
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️ • The Ultimate DIY Varia...
▶️If you don't want to build one, Buy One!
✔️amzn.to/37s0SdE
✔️usa.banggood.com/custlink/DmG...
▶️Whole Trouble Shooting Series:
✔️ • FPV Electronics Troubl...
====▶️My Scope:
✔️amzn.to/2Y7NUtc
====▶️Cheap Version:
✔️amzn.to/2PC8Ogj
✔️usa.banggood.com/custlink/33K...
====▶️Camera For My Scope:
✔️amzn.to/3SA2ANg
====▶️LED For My Scope:
✔️amzn.to/3ZiVsXC
====▶️Lens For My Scope:
✔️amzn.to/3kxPQKs
▶️My Soldering Iron:
✔️amzn.to/2Oj95XS
▶️Cheap One
✔️usa.banggood.com/custlink/mDG...
▶️Micro Pencil Soldering Tip
✔️amzn.to/3Fq1dKm
▶️My Soldering Iron Tips:
✔️amzn.to/39IT453
and
✔️amzn.to/2Oj7r8C
▶️My Favorite Multimeter:
✔️amzn.to/3Y3QlJT
▶️Cheap One
✔️usa.banggood.com/custlink/DK3...
▶️Must Have Solder Mat:
✔️amzn.to/2FXQKuU
▶️No Cotton Foam Cleaning Swabs:
✔️amzn.to/3joxWUi
===▶️ / drainmanfpv
▶️MyFPV Slidez:
✔️www.myfpvstore.com/i09w
▶️Blue Loctite:
✔️amzn.to/3fB0lqL
▶️When A Motor Rips Off:
✔️ • What Would You Do If T...
▶️How To Set Up LED's
✔️ • Betaflight LED's !! Ev...
▶️ES121 Electric Driver:
✔️ • ES121 Electric Screw D...
▶️If You Want The Beast by iFlight:
✔️amzn.to/354KxqW
✔️www.myfpvstore.com/unm5
▶️iFlight Beast Review!
✔️ • Why Wouldn't You Use T...
▶️iFlight Beast Build & Flight Video!
✔️ • Let's Build The H7 Bea...
▶️Crossfire Nano SE:
✔️www.myfpvstore.com/koh7
▶️Unify Pro 32 HV:
✔️www.myfpvstore.com/2h0e
▶️Caddx Air Unit for DJI
✔️www.myfpvstore.com/36cn
▶️Custom DrainMan Motors!
✔️www.myfpvstore.com/iydp
▶️Smoke Stoppers:
✔️amzn.to/3tsWhhq
✔️amzn.to/2YL7trB
✔️amzn.to/3tsMt77
✔️www.myfpvstore.com/8bf3
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️ • The Ultimate DIY Varia...
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
/ drainmanfpv
/ drainmanfpv
▶️If you want to learn about LED's:
✔️ • Betaflight LED's !! Ev...
▶️DJI Air Unit: ($4 Cheaper Than Anywhere Else & 2-Day Shipping)
✔️amzn.to/2PjqUDi
or
✔️www.myfpvstore.com/7ts8
▶️How To Taranis:
✔️ • How To Frsky Taranis
▶️My Electronic Screwdriver:
✔️ • ES121 Electric Screw D...
▶️1.5mm Driver:
✔️amzn.to/3txYarX
▶️Hobbywing:
✔️www.myfpvstore.com/lufc
or
✔️amzn.to/31e6jFM
▶️Loctite:
✔️amzn.to/39QY5HE
▶️Screw Pack:
✔️amzn.to/2BPzBSq
====▶️How To Set Up A Throttle Cap: (Become A Better Pilot)
✔️ • The Ultimate Throttle ...
====▶️My Go-To Pack:
✔️4s : www.myfpvstore.com/t83u
✔️6s : www.myfpvstore.com/fyk0
====▶️Flight Controllers:
✔️www.myfpvstore.com/940s
====▶️ Quadcopter Frames:
✔️www.myfpvstore.com/quadcopter...
====▶️ The Goggles I use:
✔️amzn.to/3sQ5ksu (Comes w/ 2 Modules)
✔️Analog - www.myfpvstore.com/5ff6
====▶️My Radio:
✔️amzn.to/3sU9Fem
✔️Non-DJI: amzn.to/39dqI3c
✔️HD - amzn.to/2AVAEQo
====▶️ Video Module That I use (When Using Analog):
✔️ www.myfpvstore.com/s1mh
====▶️Bench Power Supply:
✔️amzn.to/3cpIOhE
====▶️My Camera Used:
✔️amzn.to/2wX0eCg
====▶️My Cam Mic:
✔️amzn.to/3b2ZoUZ
====▶️Contact Me: @DrainManFPV on FB or DrainManFPV@gmail.com
====▶️I'Gizzle: / drainmanfpv
====▶️ / drainmanfpv
#ELRS #ExpressLRS #Tutorial

Опубликовано:

20 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 109

@balboa9439 6 дней назад

Bro just soldered everything in no time. Thank you for that video mate! Helped me a lot.

@addisonfrancisco9007 10 месяцев назад

You're the man! So easy to follow with my Radiomaster Boxer and BetaFPV ELRS Lite RX

@aerialimagery3216 11 месяцев назад

Followed your video step-by-step, and it worked like a charm! Thank you!

@Josh-us7yu 4 месяца назад

You are a life saver. Ive been up all night trying to figure this thing out. Best video guide on youtube! Thank you very much!

@JBennett530 3 месяца назад

I'd also like to say thanks for the video. It was in depth enough for us beginners that know nothing which I didn't find in all of the other how to's! Thanks!

@dawgunit1953 9 месяцев назад

I love your work bro. Thanks for your time and knowledge keep up the good work

@christiansanchez8419 Год назад

I like to say thank you, I truly enjoy your videos they are very helpful to me

@xxmgz331 4 месяца назад

Yooo! You a life saver, thanks man you really save me time and money, I was so frustrated, I couldn’t update my radio firmware for hours, but I was so lucky to found this video 😀👍🏻

@danialfpv Год назад

Love the vibe, Mr D 💪🏻💪🏻💪🏻

@LovesM855A1 Год назад

You are the man Drainman thank you Sir

@FlyZoneFpv Год назад

Awesome Drainman. This was very informative love it 🦾

@sunsetpark_fpv Год назад

Always love my new DrainMan vids 😎

@LuckyFisher87 3 месяца назад

Great and simple guide, thank you, sir 🙏

@Fwoop_fpv 11 месяцев назад

Thank you for this video! It saved me a bunch of headache.

@jmillerfpv Год назад

I always wondered why I couldn’t flash my internal elrs module on WiFi. This explained it perfect

@justinnadeau Год назад

This is great! Exactly what I was looking for since I’m about to rebuild my quad. Straight to the point and easy to follow along. Thanks for the video man 🤙

@frankburau9042 7 месяцев назад

What do 😮😮😮😊

@blizzardfpv9584 Год назад

Love ❤️ it . To the point 👉 👈

@dizzyheightdrones9294 6 месяцев назад

Brilliant video simplest one I have seen

@WildCaptures 10 месяцев назад

Thanks for your help I’m a complete noob and it worked 👍

@Bianchi77 9 месяцев назад

Nice video, thanks for sharing it, well done :)

@redreefbud 7 месяцев назад

Awesome 😁 thanks man. Building my first. With boxer and expresslrs 😉 speedybee master 5 v2 and f7 (diy), supernova motors. Loving the videos. All parts arriving today but radio on Monday 😉 keep em coming man 😁

@redreefbud 7 месяцев назад

03 air unit and integras 😉

@MrGwesh 6 месяцев назад

thanks man! very useful!

@wutufux1336 9 месяцев назад

Thanks man. You're awesome.

@jaydenstanton 2 месяца назад

OMG THIS ACTUALLY SAVED ME

@kevofpv 10 месяцев назад

sweeet bro! Thank you for that! 😘

@marinehm 5 месяцев назад

Great video

@VladVortal 6 месяцев назад

Thank you very much for video

@MountaineerFPV Год назад

Awesome review Drainman - HERE!

@precisionleadthrowing4628 Год назад

you are legend :) thanks!

@WinkFPV 8 месяцев назад

heyyyy pilots! new subscriber😊

@droneman1799 10 месяцев назад

Thanks bro,,this is i all i need

@ClareFPV Год назад

Brilliant video. Straight to the point 🔥🚀

@Nick-PaiN 7 месяцев назад

Ive struggled so much eith elrs i hope this video works! Tbs is so easy but definitely not as affordable

@myday9052 9 месяцев назад

Thank you 🌺

@smscetin 3 месяца назад

yapmış oldugun işlemler ile başardım teşekkur ederim TÜRKİYE selamlar

@soursham Год назад

Great video as always 🤟question though. Do you have to delete the old elrs lua from the sd card in the radio ? The script is run fine but I’m not getting connected

@gleeloyd 11 месяцев назад

Thanks for the video. Any idea why the R and T connections are reversed between the receiver and flight controller?

@johnsonjean-baptiste5501 4 месяца назад

Can we please get a video on how you make the wings out of XPS? I'm curious as to how you make them symmetrical

@CarbonGlassMan 10 дней назад

You're a smart guy. Why on Earth would my 3" drone, that I have been flying for hundreds of batteries, suddenly stop connecting to my radio after it's been sittong on a shelf unused for 6 months or so? The BetaFPV 900 receiver wouldn't connect to my radio. I just reflashed the receiver and it connects & works fine. But is this common? For firmware to degrade from just sitting in a receiver? You ever had hardware just stop working for no reason, only to begin working again after reinstalling firmware?

@HansNoteboom 2 месяца назад

Bedankt

@MrMoonChild 4 месяца назад

great video, im following along but the wifi on my controller is not showing up, what can I do in this case.. Thanks in advance 👍

@tripleyyong Год назад

Hi, i would like to ask some out of topics questions. In your experiences, is every broken fc fixable? Is there any chances the traces in the fc pcb is shorted instead of the component?

@michaelsantoro9670 9 месяцев назад

Hey drainman. I’m running openTX on on XD9 radio. Can I also ran Express LRS? If so, can u possibly do a video?

@fcjher7736 Год назад

Hey Man, cuando empezarás a poner los quedo en el techo?? UN SALUDO DESDE LAS ISLAS CANARIA aguimes! ! ESPAÑA😊😊

@dirtydogfpv6905 11 месяцев назад

love the video but on my tx16s for internal rf i only have ExpLRS and not CRCF so wont show in luar script

@myday9052 6 месяцев назад

Cool❤

@camdynkellett6782 Год назад

Great video! things have become so much easier over the last year, I'm stoked I went with ELRS! Do you know if the procedure is any different for Diversity ELRS Recievers? I've got the happymodel TYCO Diversity and I'm stuck with it connecting to my TX16s. It connects no problem, but no outputs in BF. I've had this for every ELRS rx but I couldn't get it right with my Diversity RX. Seems like there's a model mismatch or something, but I can't get it to work... I'll try again once I have some more time

@DrainManFPV Год назад

Yep, should be the same.

@kurtzFPV Год назад

I have 3 of those receivers and they all work with my TX16S and Boxer in Betaflight configurator 10.9 and setup using ELRS configurator 1.5. The target device in the ELRS configurator should be HappyModel EP1 Dual 2400 RX.

@hermandp6743 Год назад

@@kurtzFPV me is right like you but still no output and his led is green but before is blue so why with him 😢

@hermandp6743 Год назад

My boxer and receiver is same version is 3.2.1 I don't know why 😢😢

@d33bo78 27 дней назад

@drainman FPV, Thanks for this video. I've got Express LRS setup but I have no sticks. I'm using a revoltOSD FC and radio master RP1 v2 receiver. I have TX from the receiver going to RX3 and RX to TX1 on the FC. I am not sure how to set up my ports in Betaflight. Throttle, Roll, Pitch and Yaw do not work under the receiver tab. Can you help?

@MountaineerFPV Год назад

Congrats on the freedom of no more braces my man

@johngreen5837 9 месяцев назад

Hey drainman, can you check into betafpv literadio 2se v2 elrs to update to firmware version 3.0 so I can fly all my updated drones with it?

@godsun358 11 месяцев назад

What he say😂 yeah I might have to watch this 20 more times 🎉🎉🎉😢

@arbelcasquejo2336 Месяц назад

Good day just new with building drones. I just want to ask what does it mean if the status in the internal rf is 500hz 1 Err? tnx

@Prime.2 2 месяца назад

Hey man! I’m on Mac and i run into a problem when i connect to my radiomaster boxer wifi. Nothing happens when i select “choose file” and it wont work when i try it on safari either. It just says “error upload model configuration”. Also cant open repartitioner. Any idea to get around this? Thanks!

@CarlosRodriguez-vg2ob 24 дня назад

hi do you have a video on how to do a bench test? I'm getting a warning saying RF signal critical and is triggering the fail safe. PS anywhere pass 200 meters and with line of site. it was not doing it before and i need to test if the issue is the antenna on the radio or on the drone.

@unknw51 4 месяца назад

hi sir i have mobula7 HD 1s drone FRSKY version. Does happymodel elrs module work or support it?

@itzjoeylo4501 8 месяцев назад

How about a bare elrs receiver inside of a fixed wing AtomRC killer whale? It was custom built and the builder didn’t clear heat shrink the micro RX. Any input?

@scole901 7 месяцев назад

if i already have quads bound to my zorro will this wifi thing mess them up?

@gregorydahl 5 месяцев назад

It was flashing orange real fast in between ?

@henrijsdandzbergs 7 месяцев назад

i have set everything up, all the connnection bars are showing but im not sure how to get the drone actually flying, am i supposed to arm it or something? btw im using the radiomaster boxer

@scottishhistorywithnico 8 месяцев назад

I cannot get my Commando 8 ELRS 868/915 Mhz Reciever to show up on my WIFI, been trying to fix this for days now , no luck. iFlight support not much help. Bought the Chimera7 Pro a week ago and been unable to fly it because I can't bind the Reciever, any help on this would be welcome

@kurtzFPV Год назад

What wifi adapter are you using? Mine is super slow finding the connection on my desktop.

@DrainManFPV Год назад

That PC has the ROG STRIX Z790-E (Motherboard with built in WiFi)

@animishaalagappa2327 Месяц назад

I have a Mateksys r24 with a pwm converter, and the Rx update is showing some error saying that "Magic byte is wrong, not 0xE9".... Any ideas??

@dondupuis4007 9 месяцев назад

When I click build in ExpressLRS Configurator, I get You must choose a regulatory domain for your device, I don't know what they are asking for?

@nutsnbolts4601 Год назад

Question sir can u let me kno the easiest way to contact elrs to my radio link rx8 ground radio for Rc car ? If u have time to answer a question 🙋‍♂️ thank u.

@93JB93 Год назад

I made the mistake of buying a drone. It's the happy model mobula6. I didn't buy a visor or remote. I thought it came with both of them but it didn't. So now I'm just waiting to get my money up to buy goggles and a remote. Any recommendations under a budget of $300?

@k1ortia 11 месяцев назад

after waiting for over 45 minutes for my betafpv 2.4 micro to update to latest elrs firmware, it always crashes and says error? any suggestions? cheers

@technicalchannel6416 7 месяцев назад

And if i try to connect with betaflight there is no com port is shown and when I try to another dron to contact betaflight than connect why

@charliemaybe 3 месяца назад

all I have is flash, no build and flash or build options at the bottom, what do I do?

@officialjoeynguyen 10 месяцев назад

Hi, I can't update my Jumper T-Pro. Get this error " Pre-connection option "no_reset" was selected. Connection may fail if the chip is not in bootloader or flasher stub mode" Any suggestions to resolve this issue?

@christopherconkright1317 6 месяцев назад

My receiver flashes one green flash and that is it, I check the wiring three times i bought a new one incase defective but what else could it be?

@KwandikeUA 3 месяца назад

My betafpv 2.4 nano rx won’t start wifi. Stays in bind mode forever. Checked wiring, checked for shorts, all seems ok. Elrs guide didn’t help much. Any suggestions guys, pls? Thx😊

@24KETT 25 дней назад

I have flywoo baby quad elrs reciever and accidentally updated on device category Flywoo elre 2.4ghz rx and later on i did find out that the elrs reciever is DIY device 2.4ghz. assuming it is also a flywoo device,😢 now i dont know how to update the reciever

@endoftrails5200 Месяц назад

Hello, I am trying to bind my a Babyhawk 2 O3 ELRS with the Zorro ELRS version. The red light on the receiver is solid and the Zorro even tells me that telemetry is on or when I dosconnect the battery that it's lost. So somehow I think it should be binded. But I can't arm the drone. Also Zorro does not do anything in Betaflight. Bars don't move. It's just like it is not their. I am actually sure that I updated the Zorro correctly (ExpressLRS) and I also think that I flasehd the Babyhawk correctly. I am trying for over one week now and I do not have any idea how to proceed :/ Can anybody help?

@technicalchannel6416 7 месяцев назад

Hlo brother I m doing same process like u telling in this video but my know my FC is not connect with betaflight and my reciver is also not connect with my radio

@carlotagliabue437 2 месяца назад

followed your steps, during the radiomaster file generation (mine is radiomaster pocket) it only downloads the "firmware.bin" file and nothing else.Tips??

@carlotagliabue437 2 месяца назад

Does this regardless of the model of the remote selected.

@invisiblealex007 8 месяцев назад

Hepl me please. I've just updated my new TX16S Mk2. Created new profile for new drone (gave a name Cinelog30). I saw that after update my firmawere of expressLRS changed from 3.0.1 to 3.3.3. I chose 'lau ExpresLRS' and pussed BIND (also turned on the new drone. It started to blink). I tried several times to pair them, but I did not get success... I see connection process passed 1-2 sec on remote and I did not see any confirmation. So the drone continue blinking with diferent colors. I pused/holded button on the motherboars's drone and still did not have any result. What I am doind wrong?

@DrDeez69 6 месяцев назад

I think I messed my stuff up. Did everything thing the same but the import/export part failed and so did the repartition. Can anyone help?

@hassanboyce5567 9 месяцев назад

Yo anyone have an issue where they try to flash their RX but they get the “not enough space error”? I see he had it happen for his TX is it the same fix? Thanks!

@umbrela_Corp Год назад

Heeeyyy pilots

@jimmywallace1255 25 дней назад

when i connect to wifi it takes me to msn web page

@jorik6593 10 месяцев назад

The site doesnt load on the reciever

@boulaypa 3 месяца назад

what is ELRS ? a receiver that works with radiomaster rigs ?

@deadstickfpv Год назад

I'll stick to crossfire.. much easier

@JDDupuy Год назад

And no fail safes. I have dropped 3 drones out of the sky due to unreliable ELRS! The hardware names are never correct in the configuration also. I have bricked 3 receivers because the devs can't take the time to update and type the correct hardware names. The latest Foxeer receivers are a great example. Connect to bluetooth and find the model hardware and no match in the configurator!

@kosti116 7 месяцев назад

Test, simple and more expensive :)

@gregorydahl 5 месяцев назад

@@JDDupuyi have 3 tx modules 900mhz , and one 2.4ghz , and 8 rx that only one worked . Until the antenna caught a prop . I just spent another hour or two trying new 3.2 firmware and it says failed to initialize . Evrty year or so i drag all that elrs stuff out to try the latest goose chase .

@highonahill 11 месяцев назад

lost me before the 3 min mark. between edge tx, betaflight, and other software, im so lost now. Wish I just left my old dx6i binded up.

@antoineozaneaux6881 10 месяцев назад

$100.00 per hour cash in COLORADO for ELRS help .LET S GO .

@benherr2736 3 месяца назад

Boy, I must be Dumb , When I download the configurator It will not install. I don't see a EXE File ?? Windows machine. I with the fellow below Crossfire is Much easier. But I wanted the Tiny Hawk 3 and it oly rune ELrs. Using an extremal module on a Taranis X7 Any Ideas ?? Thanks Ben Herr

@BrainDeadEngineering 10 месяцев назад

Thought you could not flash .3x unless 2.5.1 was flashed first ? You did not define if you was using a virgin RX

@michelblais3556 11 месяцев назад

J’ai même radio toi et ça ne marche pas expressLRS sur radio master je c’est plus quoi faire pour bind désolé de te parler en français peux tu m’aider svp suis un autre vidéo ??

@sconerin1 9 месяцев назад

just got the pocket radiomaster noob to this radio not on the list,

@johnwalter6410 5 месяцев назад

This dude looks like hes high on xanax all the time

@hardyflight 4 месяца назад

Looks pretty normal to me

@Unsub223 3 месяца назад

Yeah, this is just straight BS, I used to run spectrum back in the day and putting in the bind plug was a hassle. I squished a brand new acrobee65 after trying to get it to connect to the brand new radio Master pocket I bought.

@freespirit3152 9 месяцев назад

Bucket Loads way too much WIFI Thanks anyway

@mr.relentless4117 Месяц назад

When you upgraded to lua v3 you erase the elrsv2.lua file did you erase the elrsv2.luac file under it? Got my first elrs radio coming and trying to cover all angles.

@k1ortia 11 месяцев назад

Show me how to bind to the Damm happymodel Bassline and will be truly impressed. Im getting absolutely nowhere. 4 weeks in...Grrrrrrr😤😠