Model scaled up the T-7A 64mm EDF jet to make an 80mm version with the same care and attention to appearance and performance. The T-7A 80mm EDF jet is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, clear canopy, removable missiles plus drop tank and more.
XFly T-7A Red Hawk 80mm EDF JET PNP
Description
Model scaled up the T-7A 64mm EDF jet to make an 80mm version with the same care and attention to appearance and performance. The T-7A 80mm EDF jet is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, clear canopy, removable missiles plus drop tank and more. Featuring the functional LED navigation and landing lights, full-flying horizontal stabs, sequenced gear doors, scale retractable CNC metal landing gears and operational flaperon setting, this larger version can bring you unexpected scale-like flying experience!
With a 6S Lipo battery, the high-power 80mm EDF with 12-blade fan, 6S-compatible brushless inrunner motor and 100A ESC deliver fantastic top speed and vertical performamce plus amazing turbine-like sound. With stability it's a scale jet that flies smooth and handles like a sport jet. Integrated wing connectors and glueless design facilitate fast and easy assembly, so you can get the 80mm T-7A airborne in less than one hour.
Features
Scale replica of the iconic aircraft flown by the U.S. Air Force for training and other missions
High-power 80mm EDF with 12-blade fan
6S-compatible brushless inrunner motor and 100A ESC
Scale retractable shock-absorbing metal landing gears with sequenced gear doors
Factory-installed 4 bright LED navigation and landing lights, full-flying horizontal stabs plus operational flaperon setting
Removable missiles and drop tank for optional use
Integrated wing connectors for easy installation or removal of main wings
Latch-type top hatch with clear canopy, cockpit detail and pilot figure
Large battery tray allows for 6S 4000-7000mAh LiPo battery for increased flight times
Fast and easy assembly - no glue required
Technical Specifications
Wingspan: 975mm/38.4in
Length: 1360mm/53.5in
Wing load: 146g/dm²
Wing Area: 21.5dm²
Flying weight: around 3150g
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: Yes
Scale-like retractable metal landing gears
LED Wingtip Lightings
Recommended Radio: 5/6 CH- Flaperon(Aileron & Flap), Elevator, Throttle, Rudder and Retracts
Recommended environment: Outdoor
Flying time: Approx. 4-8 minutes
Takeoff/Landing: runway or short grass
Mounting duration: around 10 minutes
EDF: 1x 80mm 12 blades (Galaxy X-8 6S version)
Motor: 1x Brushless Inrunner 3280-KV2200
ECS: 1x 100A Hobbywing with EC5 connector UBEC 5A
Servos: 9g Servo*5, 13g Servo*5
Content
XFly T-7A Red Hawk 80mm EDF JET PNP
Required
5/6-Channel radio transmitter
5/6-Channel receiver
6-Cell 22.2V 4000-7000mAh LiPo battery 35C with EC5 connector (nota: If the battery of discharge rate is more than 100C, please use the 120A ESC instead)
6-Cell compatible battery charger
8 апр 2024
