RANGE ROVER P38 FULL TOWING BAR INSTALL

Подписаться 2 тыс.

Просмотров 24 тыс.

50% 1

I bought cheap Range Rover P38 and my vision was to have a car that can tow almost anything. But Range was without a towing bar. This motivated me to buy an used towing bar and install it myself.
I hope this detailed video of towing bar install helps you out. Thanks for watching !
#rangerover #p38 #towing
Part numbers :
SIDE BUMPER BRACKET - ANR 2500
REAR BUMPER MOUNTING BRACKET - ANR 2381
BOLTS FOR TOWING BAR x 8 - M10 X 90mm
BOLTS FOR BUMPER x 2 - M8 X 40mm
BOLTS FOR SIDE BUMPER BRACKETS - M8 X 40mm
DONATIONS FOR UNIT AND TOOLS
www.paypal.com/paypalme/rusth...
THANK YOU EVERYONE
#rangerover #p38 #towing #landrover #4x4

Авто/Мото

Опубликовано:

3 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@danijel259 8 месяцев назад

Idemooo! Majstorski uradjeno !! 🙌🏻🔥💪🏻

@tonyrangeroverp3852 6 месяцев назад

Great video, and lovely P38 you have 👍

@rusthunterz 6 месяцев назад

Thank you mate 🙌

@user-tz3lk2ef1o 8 месяцев назад

Hello from Slovenia. Great video! Nice to see you enjoying in project.

@rusthunterz 8 месяцев назад

Thank you so much, it means a lot !

@shanedowman7090 9 месяцев назад

Good luck I hope to see this channel grow

@rusthunterz 9 месяцев назад

Thank you so much !

@harisbijedic4949 Год назад

Great video bro! Can't wait to see the rest of the car restoration! Amazing work! 😊

@rusthunterz 11 месяцев назад

Thank you !

@resadadrovic6715 8 месяцев назад

Toooo Majstoreeee 👍👍

@rusthunterz 8 месяцев назад

Thank you Bro !

@robertrichardson1779 11 месяцев назад

Excellent video, very informative and nicely done!

@rusthunterz 11 месяцев назад

Thank you !

@ThePapers-say 7 месяцев назад

The bolts you were using in most areas are actually set screws. Bolts aren’t threaded along their total length like set screws are and threaded about two thirds their length. But your P38 will tow with a rolling resistance 35000kg although not legally of course. The most I’ve towed with mine was 36500kg but I believe they will tow a lot more than that. Great video too 👍

@rusthunterz 7 месяцев назад

Thank you !

@MrLaurencemak 7 месяцев назад

I just bought mine P38 as well...only downside is the gas...but overall the P38 is super solid. Im looking foward to see your content and your journey on your P38.

@rusthunterz 7 месяцев назад

Good luck with your P38 ,they are amazing cars. Thank you so much for support !

@edvinkahriman1026 11 месяцев назад

Sound quality 10/10 Video quality 10/10 Good video bro ♥️ explained into details Music is nice and relaxing good pick 😁

@rusthunterz 11 месяцев назад

Thank you Bro !

@spg993 9 месяцев назад

We should have recorded the days we spent fixing the fiat, would have been a good one. 😄

@rusthunterz 9 месяцев назад

That would be a funny one !

@SuperMisterInvisible 10 месяцев назад

Great video mate, good luck for the channel. I've a P38 Westminster 4.0 and fighting the rust to. Luckily yours doesn't look to bad, the same as mine.

@rusthunterz 10 месяцев назад

Thank you mate, good luck with work on P38 !

@AMERICANA-BOOMSTICK 9 месяцев назад

You done good. Keep safe, keep wrenching!

@rusthunterz 9 месяцев назад

Thank you !

@irryeyananna Год назад

Great job!

@rusthunterz 11 месяцев назад

Thank you !

@andrewfitzmaurice7843 3 месяца назад

I’ve just started fitting a tow bar to my 2002 P38, but I’m having the same problem with those 2 bolts, like you I expect I will be changing the brackets at the ends of the chassis legs. Although I’m not looking forward to trying to get those bolts out without damaging the bumper. Hopefully if it’s dry tomorrow I can have another go.

@rusthunterz 3 месяца назад

If the bolts are too rusty and you are not able to take them out, cut the bolts slowly with smallest cuting disc which you can attach on drill.Good luck

@asomind 6 месяцев назад

Good job ! Quick question, did you weld the exhaust tip on the stock rear silencer ? I have a set of exhaust tips and looking for inspiration on how to attach them, cut the bumper etc... If you have any info id appreciate that ! Thanks !

@rusthunterz 6 месяцев назад

Thank you ! Exhaust tip was like that already when I bought the car