Тёмный

Rare Double Cleaver [Black Blade With Kingwood Handle] 

Forgotten Shine Restoration
Подписаться 549 тыс.
Просмотров 3,3 млн
50% 1

Anyone who likes old, rare things will love this restoration. I'm restoring an rare antique double cleaver! I have to work a lot on the lathe, grinding, drilling, thread cutting, working with chemicals and a lot more... I had to replace the old handle with a new one, this time made of kingwood. But I also worked with steel and brass. In the end, the antique cleaver will somehow look old and new! Stay tuned, and have fun watching!
▶ What did I do?! ◀
After dismantling the old, very rare hatchet, I placed the blade in a bath of rust remover. To prevent the blade from rusting, I treated it with iron(III)chloride. I made the new wooden handle out of kingwood and also made new caps out of brass. I made the entire handle on the lathe, so if you like working on the lathe, this is the project for you! Because I deliberately left the pitting, the double cleaver has a unique look, somehow new and old at the same time. With the knowledge that the wooden handle is made of “kingwood”, the unique cleaver immediately takes on a mystical character. I love it!
▶ Good to know ◀
I used the following tools: hammer, pin punch, box, rust remover, wire brush, belt sander, saw, center punch, cordless screwdriver, drill, tap, cutting oil spray, orbital sander, iron(III) chloride, steel wool, lathe, lathe chisel, center drill, boring bar, 1mm milling cutter, milling machine, sandpaper, tweezers, ruler, pencil, file, glue, isopropanol, cotton buds
▶ Special thanks to my channel members! ◀
⭐Fred Chipps
▶ Do you want to support me? ◀
Would you like to become a channel member? Then you can do this here:
/ @forgottenshinerestora...
Do you like what you saw and want to help the channel develop further? If you want to support me, you can donate via Paypal:
www.paypal.com...
or use the following affiliate links:
Material to work with:
Metabo bench grinder: amzn.to/46rrkxL
Metabo cordless screwdriver BS 18 LTX-3 BL: amzn.to/43833JV
Metabo bit set: amzn.to/3pzwV4n
Rust remover: amzn.to/3vdQ52f
Pin punch: amzn.to/3NEn1qX
Iron(III) chloride: amzn.to/3GXSb93
Boring rods: amzn.to/3TFFOWD
Equipment:
Camera Sony AX-53 amzn.to/3XHqI2J
Ring light amzn.to/3rhgj1Q
Microphone Rode amzn.to/44vlFF1
DJI Gimbal Camera amzn.to/3O1YjkJ
Affiliate links cost you nothing, I only receive a small share from the seller, you have no disadvantage.
▶ Did you like it? ◀
Did you like the video? Then like, subscribe and share, please!
Thank you!

Опубликовано:

 

29 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 406   
@jeffreynerdin3522
@jeffreynerdin3522 9 месяцев назад
There was a reason why the original handle wasn’t round. An oval cross section in the handle allows the user to index it it their hand and know the direction of the blades without having to look at it. This blade is obviously to hang on a wall and will probably never see any practical use, but you should still understand a tool before “restoring” it. You also significantly weakened the handle by removing all that metal at the top, but again…wall hanging.
@micgreenson7308
@micgreenson7308 9 месяцев назад
Amazing Jeff
@kemaldzinic-meyer9647
@kemaldzinic-meyer9647 9 месяцев назад
Exactly my thoughts, nice skills but that clever will never be used as a tool again. His hollow handle is kept together only by that little screw. I have never seen a handle made like this honestly. But again, nice looking
@itstricky73
@itstricky73 9 месяцев назад
Bet you're fun at parties.
@micgreenson7308
@micgreenson7308 9 месяцев назад
@@itstricky73 at least my boy Jeff is interesting, you sound like one of them at a party everyone walks away from 🙃😉
@Kyle-nm1kh
@Kyle-nm1kh 9 месяцев назад
It's incredibly easy to know the direction of the blades without looking at it. All you have to do is hold it and you can feel the direction the weight is pulling you. Weight distribution is how your brain knows how to orient your own body. Your brain is designed more for that than for touching.
@TunyIshikol
@TunyIshikol 21 день назад
There is a lot of work to be done on the axe but in the end it turned out better than I expected. There are many fans of historical weapons, you can also trade them if you want to make money.
@randymarsh4733
@randymarsh4733 9 месяцев назад
e Arzgebaarcher uhne Drachselbank , wos es alles gibt! Trotzdam gut geworn! ❤
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
🤣 Ich komme nicht aus dem Erzgebirge aber bin ziemlich nah dran... Aber natürlich habe ich eine Drechselbank, nur diesmal wollte ich es eben auf der Drehmaschine machen😅🐢
@strawz007
@strawz007 6 месяцев назад
Absolutely stunning
@ForgottenShineRestoration
@ForgottenShineRestoration 5 месяцев назад
Thanks a lot! 🐢
@TOMMYRestoration
@TOMMYRestoration 9 месяцев назад
Really fun Greetings, my friend
@vanpenguin22
@vanpenguin22 9 месяцев назад
The complexion of the wood for the handle is quite fetching. Especially up against the shiny brass end caps.
@vinceianni4026
@vinceianni4026 9 месяцев назад
Beautiful restoration mister good job well done
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Thanks! 🐢
@ВикторГалянин
@ВикторГалянин 9 месяцев назад
Блестящая реставрация, очень рад что оставили не тронутой фурнитуру лезвия. А рукоятка бесподобная красота. Спасибо за видео и перевод, лайк однозначно🙏
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Спасибо, я рада, что вам понравилось! 🐢
@mundea
@mundea 9 месяцев назад
Turtleeeeeeee!!!
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
👑🐢
@drasiella
@drasiella 7 месяцев назад
I need it!!
@lianbozhang1260
@lianbozhang1260 9 месяцев назад
Round axe handles are prone to slipping in the hand during use.
@modellbahnagenda
@modellbahnagenda 9 месяцев назад
Kompliment 👍👍👍
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Vielen Dank! 🐢
@Андрей-п1т5п
@Андрей-п1т5п 9 месяцев назад
Всё отлично, но я бы сделал винт "утопленный" в кольце рукоятки.
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Спасибо, я тоже изначально так планировал, но почему-то мне так понравилось... 🐢
@olqaabrosimova3535
@olqaabrosimova3535 6 месяцев назад
А какой химией пользуетесь?
@ВадимГромов-й3п
@ВадимГромов-й3п 6 месяцев назад
А где купить такую печку ?
@kshredder
@kshredder 28 дней назад
The comment section is like 90% of people know more than the uploader himself.
@kestrel230
@kestrel230 Месяц назад
Antique collectors will be screaming "NO! LEAVE IT ALONE!".. If the item had any value at all you've probably just reduced it to virtually zero...
@satyambaranwal8101
@satyambaranwal8101 8 месяцев назад
Why i am watching this at 3am?
@AmericaPrime711
@AmericaPrime711 6 месяцев назад
Cus ist cool :)
@greendijk5117
@greendijk5117 6 месяцев назад
Because you are stoned
@Secretsro
@Secretsro 6 дней назад
Depression
@mustafaaljawhar1563
@mustafaaljawhar1563 9 месяцев назад
Good work, but you were able to remove the traces of rust on the knife’s body, except that you cleaned it and left it in its previous rotten state.
@harrygatto
@harrygatto 9 месяцев назад
Nice restoration but I think the screwhead looks a little brutal, maybe better to have been a dome shape?
@meganek0597
@meganek0597 9 месяцев назад
Nah
@jeffbaranowski6695
@jeffbaranowski6695 9 месяцев назад
I agree and I also feel the brass parts should be flush with the wood of the handle.
@omarkennedy7056
@omarkennedy7056 9 месяцев назад
I would have loved to see so.e glue in the hole and then filed it flush with the end so it looks like nothings there
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
That's right, I admit that I actually had a completely different plan, I wanted to do away with the screw completely. But I liked it so much here that I left it.🐢
@mulepowerforge
@mulepowerforge 9 месяцев назад
looks like the main body is wrought iron. the edges are probably high carbon steel forge welded on.
@walnutt22
@walnutt22 9 месяцев назад
Definitely. You can see the difference in sparks while he's grinding the top contour. I let out a "Nooo!" when he took an orbital sander to the grain of the wrought iron. Still turned out great.
@AkshayKumar-rz1uc
@AkshayKumar-rz1uc 6 месяцев назад
WOW 😮 This man Turns an Wooden Stick into an Amazing Tool for Nose Piercing a CALF : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SKJhUAjuEy4.html
@jdean3305
@jdean3305 9 месяцев назад
The screw not sitting flush would bother my OCD but the handle is beautiful and I love how you got the blade darkened. Greeat job.
@Danielson1818
@Danielson1818 9 месяцев назад
I don't know if you've ever done any metal work, but him dipping it in the acid was the easiest thing he did on that build. It looks nice, but also it helps keep the steel from rusting. You don't even need the acid, because some people just use boiling vinegar, and it does the same thing after a few dips. I do it all the time.
@AbolishtheNFA
@AbolishtheNFA 2 месяца назад
I'm with you. Countersinking it just to the not use a beveled screw was shameful
@Devlington87
@Devlington87 6 месяцев назад
Beautiful work. The original brass rings would have been heated and then shrunk onto the wood, causing interference fit. This could have been a stronger fastening than machining a solid billet and bonding the wood to the axe. Beautiful turning work though.
@jeffburnham6611
@jeffburnham6611 9 месяцев назад
I'm a traditionalist, so I'm glad that this wasn't titled as a restoration since many of the original parts were replaced with modified components.
@martinrouser
@martinrouser 3 месяца назад
Some guys gotta go to 11, what is the need for double cleaver? Are you chopping up and down? I say we quit the kid stuff and go for a minimum of triple cleaver just as an intro as we travel past octocleaver on the way to dodeca-B. F. Cleavatron!
@hummakavula8062
@hummakavula8062 9 месяцев назад
Looks like the melee weapon in Quake lol
@Wanderleyws
@Wanderleyws 8 месяцев назад
Trabalho com o cabo de madeira foi lindo, mas não combinou com a lâmina. Parabéns
@kubranur6012
@kubranur6012 9 месяцев назад
Orjinal hali kadar güzel olmadı. Pirinç vida çıkıntısı çok rahatsız ediyor. Ve artık balta eskisi kadar işlevli değil bence.
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Doğru, aslında tamamen farklı bir planım olduğunu itiraf ediyorum, tamamen vidasız yapmak istedim. Ama burayı o kadar sevdim ki bıraktım.🐢
@deedlehill7896
@deedlehill7896 9 месяцев назад
You never said liquid use for derusteent
@PabloOrtega-c7i
@PabloOrtega-c7i 8 дней назад
¿When was made that axe?, and what kind of metal and process they use?
@PabloOrtega-c7i
@PabloOrtega-c7i 8 дней назад
¿When was made that axe?, and what kind of metal and process they use?
@boreddude8531
@boreddude8531 9 месяцев назад
that screw jutting out of the end of the handle bothers me
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Cool idea! My plan was actually to file away the screw, but I liked it better this way...🐢
@lunarfarmer2716
@lunarfarmer2716 9 месяцев назад
Блин, взять дюймовый пруток латуни и сделать винт М5... Я отстал от понимания всего этого. Твой "Потому что могу" родил этот коммент. Продолжай дальше.
@ZhurkoSander
@ZhurkoSander 7 месяцев назад
Творчество 🚀
@AkshayKumar-rz1uc
@AkshayKumar-rz1uc 6 месяцев назад
WOW 😮 This man Turns an Wooden Stick into an Amazing Tool for Nose Piercing a CALF : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SKJhUAjuEy4.html
@CrazyMF3R
@CrazyMF3R 4 дня назад
The invention of the lathe is right behind gun powder and fire..
@МихаилКратюк-м3г
@МихаилКратюк-м3г 9 месяцев назад
Болт снизу можно было и взападлецо сделать,а то выпирает некрасиво.
@macbulrustam1664
@macbulrustam1664 7 месяцев назад
Kapak Naga Geni 212 milik Wiro Sableng 🤣
@-wotiu_77
@-wotiu_77 9 месяцев назад
nice, you can cut 2blocks, simultaneous stroke, One on the down stroke.. One on the up stroke 😅..
@alphagodith3827
@alphagodith3827 9 месяцев назад
not fond of having rust remover poured on my eyes (the camera) but otherwise lovely as usual!
@TreeTimer311
@TreeTimer311 8 дней назад
A lot of old old weirdos in the comments.
@kimora_repezen
@kimora_repezen 26 дней назад
ありがとう。不幸なことがあって落ち込んでいたけど、元気になりました
@РомаЖук-ч1ш
@РомаЖук-ч1ш 9 месяцев назад
Дерево здаєтьсяамарант
@MHahn-bg7cu
@MHahn-bg7cu Месяц назад
What was the use of this oddly shaped cleaver? What was it made for in the first place?
@bloodgout
@bloodgout 9 месяцев назад
Wrought iron?
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Yes... 🐢
@user-brobdingneg
@user-brobdingneg 9 месяцев назад
Я погляжу черепахи в вашем регионе любят ароматерапию в зимний период! 😂 Рукоять топора мне очень понравилась. В отличие от самого топора! Форма у него неказистая 🤷‍♂️
@XMcNealX
@XMcNealX 9 месяцев назад
Nicely done but that screw popping out of the handle is throwing me off
@SilverMKI
@SilverMKI 9 месяцев назад
Would have been cool to make the screw a loop for hanging. Otherwise looks great.
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Cool idea! My plan was actually to file away the screw, but I liked it better this way...🐢
@ロイヤルミルクティー-t3d
@ロイヤルミルクティー-t3d 9 месяцев назад
どういった目的で制作されたのか気になる斧ですね🪓
@RestorationVideo
@RestorationVideo 9 месяцев назад
You have recovered wonderfully. They look much nicer. Well done. That's always a great thing.👍👍👍👍
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Thank you very much! 🐢
@deerslayer6419
@deerslayer6419 9 месяцев назад
Awsome job! I was wondering about the handle. Was there any reason why the handle wasn't epoxied on, along with the fastener? It didn't look like a very close tolerance fit when you slid the handle on. Just wondering...Thanks great video!
@andrzejporeda7281
@andrzejporeda7281 9 месяцев назад
Przepięknie jest odrestaurowany ten stary zabytkowy nietypowy toporek pozdrawiam serdecznie 👍👍👍👍
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Dziękuję bardzo, cieszę się, że ci się podoba🐢
@andrzejporeda7281
@andrzejporeda7281 9 месяцев назад
​@@ForgottenShineRestorationbo jest to bardzo fachowo odrestaurowane pozdrawiam serdecznie 👍👍👍👍
@chadouellette790
@chadouellette790 9 месяцев назад
Looks like a weapon used in the movie gangs of new York
@정찰풍선날리면
@정찰풍선날리면 Месяц назад
이런 녹은 어디서 만듭니까?
@sergynok
@sergynok 9 месяцев назад
Подскажите,что за химия для очистки металла использовалась?
@raihanfarrelofficial
@raihanfarrelofficial 9 месяцев назад
Why you not test it?
@krisaaron5771
@krisaaron5771 4 месяца назад
Your work reminds me of how a jeweler creates a work of art! Btw, what is the little turtle's name? Anyone that helpful must have a name!
@user-nk6if2pi3x
@user-nk6if2pi3x 9 месяцев назад
I’m curious as to how you recycle/repurpose all the metal filings.
@jailsondasilva223
@jailsondasilva223 9 месяцев назад
Restaurada machadinha dupla 😉
@jpmzo
@jpmzo 7 месяцев назад
What do you do with all the metal shavings?
@Миротворец-я4е
@Миротворец-я4е 2 месяца назад
Топор очистил, наточил, рукоятку поменял. Зачем надо было менять рукоятку, если топор просто очистили от ржавчины? Тогда надо было бы и топор доводить до ума... Вообще смысла не понял.
@smaybius
@smaybius 4 месяца назад
Why a rust remover fluid when electrolysis can do the same job?
@38kari
@38kari 8 месяцев назад
That turtle always lends support and makes me smile 🐢
@ForgottenShineRestoration
@ForgottenShineRestoration 8 месяцев назад
Thank you very much, I'm very happy if you like my videos!🐢
@rogergadley9965
@rogergadley9965 5 месяцев назад
Very attractive redone cleaver and very nicely done. I assume this is a display piece and not intended for use in the kitchen. Because, all those pits you left in the metal would collect bits of blood, bone and even flesh, creating an infectious nightmare I would not use in my kitchen. Still, a very striking piece (pun intended).
@ForgottenShineRestoration
@ForgottenShineRestoration 5 месяцев назад
Yes, never used like that... 🐢
@catgynt9148
@catgynt9148 9 месяцев назад
Incredible restoration sir, thanks for sharing this video. Instead of using the FeCl, could you have electroplated nickel to avoid future rust? Wishing you and your family a blessed holiday season. Peace
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Thanks for the tip! I also wish you a Merry Christmas and a Happy New Year!🐢
@John-w8l4l
@John-w8l4l 2 дня назад
Love it. Ultimate respect for skilled tradesman.
@noodleincup
@noodleincup 3 месяца назад
new handle will fell off, you artist. BS chinese quality
@Cypher791
@Cypher791 4 месяца назад
🪓😊
@arturoherrera5915
@arturoherrera5915 9 месяцев назад
I feel that is incomplete....it is not shiny....
@Ichka-nq1ct
@Ichka-nq1ct 9 месяцев назад
A vous tous et à Tortue : je vous souhaite de très bonnes fêtes de fin d'année !🎉🎉🎉🎉
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Merci beaucoup, nous te souhaitons également un joyeux Noël et une bonne année !🐢
@notimportant3686
@notimportant3686 9 месяцев назад
not a big fan of that bolt, large and cumbersome and a weird look to have it sticking out of the bottom like that, perhaps something more flat headed next time?... it's an awkward nipple
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
I admit that I actually had a completely different plan, I wanted to file down the screw. But I liked it better that way...🐢
@mundea
@mundea 9 месяцев назад
this is what i needed to see today; lets get this restoration party started xD
@rulitogg
@rulitogg 9 месяцев назад
Same 😂
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
have a lot of fun 😁👍🐢
@melszymanski17261
@melszymanski17261 9 месяцев назад
That was awesome, thanks! I love the colour of the wood you chose for the handle ❤️
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Thank you, nice that you like it🐢
@Михаил-72
@Михаил-72 4 месяца назад
Называйте это как угодно но только не реставрация.
@juanpablodelamaza5469
@juanpablodelamaza5469 5 дней назад
Love the video man ! Great work ! Dont listen to the nerds coments.
@ForgottenShineRestoration
@ForgottenShineRestoration 3 дня назад
Thank you! 🐢
@kapeel2008
@kapeel2008 9 месяцев назад
You got to respect both the modern and the older workmanship... Modern is beautiful, older is rustic... But older times they didn't have any power tools... It was all hand made... literally blood and sweat went into it.
@nickize3146
@nickize3146 9 месяцев назад
I just found your videos. You do lovely work. I love your turtle friend! ❤
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Thank you and welcome! 🐢
@SpencerIsAFunnyOnion
@SpencerIsAFunnyOnion 4 месяца назад
Where did you get the räuchermänn bbq?
@jlindskog5141
@jlindskog5141 9 месяцев назад
Tolle Arbeit ! Frohe Weihnachten 😊🐢🎄
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Vielen Dank! Frohe Weihnachten! 🐢
@MRTEKNIQ-jq8vn
@MRTEKNIQ-jq8vn 9 месяцев назад
That was great, thanks! You put a lot of effort into creating this wonderful work ❤
@Quinn-b8u
@Quinn-b8u 9 месяцев назад
Not sure but that thing looks like it was used for execution.
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
😱😱🐢
@stevedendera
@stevedendera 3 месяца назад
There's no need to call that bar boring. It's trying it's best.
@anatoliydjabrailov8509
@anatoliydjabrailov8509 8 месяцев назад
Плохо что рукоять не смог так же повторить, ну а в целом больше ни чего и не сделал кроме чистки и придания формы. Рукоять в таком исполнении делали старые мастера, мой дед делал так, его ножи до сих пор на кухне служат нам около 90 лет они в нашей семье, ни одна рукоять ни на миллиметр не сдвинулась без капли клея. Вам нужно овладеть такой техникой и будет круто. Заметил как вы снимали ручку, как она держалась и не хотела уходить со своего места и заметил как вы установили новую она туда влетела как рука в огромный карман и вы просто затянули её винтом который можно было скрыть заподлицо на винт который не выкручивается назад и этот винт не будет держать конструкцию если топором начать работать, а былая ручка или повторение такой ручки обязало бы топор служить дальше, а сейчас Стена или Витрина место этого топора.
@kaseyr.4729
@kaseyr.4729 9 месяцев назад
It looks good but the screw definitely should have been counter sunk so I was flush
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
I admit that I actually had a completely different plan, I wanted to file down the screw. But I liked it better that way...🐢
@kaseyr.4729
@kaseyr.4729 9 месяцев назад
@@ForgottenShineRestoration fair enough it's always a personal choice anyways also I can't stand that autocorrect doesn't work the way it should
@robertogrieco9554
@robertogrieco9554 8 месяцев назад
Complimenti, ottimo risultato...! Qual è la tua regione???
@ForgottenShineRestoration
@ForgottenShineRestoration 8 месяцев назад
Grazie! 🐢
@kelcesar
@kelcesar 9 месяцев назад
I believe you're from Germany, right? My cousin lives in Münster and she told me about how incense burning and candle lighting are a huge thing there. ❤ Oh, and happy holidays from Brazil!
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
That's right, I'm from Germany! Smoking men are really popular here. Happy holidays and a happy new year to you too!🐢
@hayatdevam.ediyor
@hayatdevam.ediyor 9 месяцев назад
You are so wonderful, I want to ask you something, can I know the name of the rust remover water you poured on the axe at the beginning?
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Thanks! I used this one, it works very well! amzn.to/3vdQ52f 🐢
@David-tk2kh
@David-tk2kh 5 месяцев назад
What rust remover did u use????
@drunkGRIZZLYman
@drunkGRIZZLYman 9 месяцев назад
Hello. Could you please tell me where I can purchase one of those little incense wood stoves? I think it is awesome and I must have one. Thanks you
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
It's great if you like it, because I bought it here weihrichkarzle.de/oefen-und-mehr 🐢
@АндрейКняжевский-и5ю
@АндрейКняжевский-и5ю 9 месяцев назад
Новая ручка к старому, ржавому, никому не нужному топору! 😅😅😅
@netashio
@netashio 9 месяцев назад
🤗
@КонстантинНайдёнов-з8ю
Mein Gott, so eine Entourage zu zerstören.😩
@craigmiesterable
@craigmiesterable 9 месяцев назад
Wife: Whats for dinner. Husband *busy cleaning the cleaver: Not sure yet
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
😱😱😱🐢
@gexproof3222
@gexproof3222 9 месяцев назад
No bras polish? Sad. But result is still awesome!
@garyjones2582
@garyjones2582 9 месяцев назад
Very nice work F.S.. I love that wood, it almost looks to expensive for the clever... Thx for bringing us along.. Here's wishing you a very Merry Christmas and Happy New Year.. Take care my friend...
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Thank you so much for your feedback! I also wish you a Merry Christmas and a Happy New Year!🐢
@stealthop
@stealthop 9 месяцев назад
you sure that isnt a loggers camp hatchet ?
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
I guess not... 🐢
@JoSmotherman
@JoSmotherman 9 месяцев назад
I have never seen those types of cutters. Also.....do you save your brass shavings?
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Yes, I'll collect the brass and give it away later 🐢
@lucieleimbach
@lucieleimbach 9 месяцев назад
Love the color of the handle. And as always loved seeing Turtle. Where was Turtles are 🐢 friend?❤
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Thanks, glad you liked it... turtle's friend was kind of upset, maybe they had an argument... 😱😅🐢
@ragnagiyang8914
@ragnagiyang8914 10 дней назад
남자의 로망
@darilynkrupp6309
@darilynkrupp6309 9 месяцев назад
I had to look up king wood, it made a beautiful handle.
@stephenjohnson6841
@stephenjohnson6841 9 месяцев назад
Another gorgeous restoration! Merry Christmas!
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
Thank you very much! Merry Christmas!🐢
@user-uo2ls6rl7m
@user-uo2ls6rl7m 9 месяцев назад
Nice restoration, but why did you start with breaking the upper ring? Wasn't easier to start at the bottom?
@ForgottenShineRestoration
@ForgottenShineRestoration 9 месяцев назад
That's right, then I could have removed the entire handle, good point! 🐢
Далее
HYDRAULIC PRESS VS SOCKET WRENCHES WITH RATCHET
9:07
Woodturning a Big Oak Log (Simple and Beautiful)
10:23
Watermelon magic box! #shorts by Leisi Crazy
00:20
Просмотров 23 млн
Antique Two Handed Cleaver - Restoration
12:46
Просмотров 4,2 млн
The Wood That’s Been Blowing Everyone’s Mind
14:56
Просмотров 109 тыс.
Redwood Destruction at Sawmill
14:12
Просмотров 6 тыс.
Restoration of a 105-Year-Old Rusty Pocket Knife
12:54
Removing Rust from Cast Iron Pot and Spoons
0:59
Просмотров 2,9 тыс.
Watermelon magic box! #shorts by Leisi Crazy
00:20
Просмотров 23 млн