Raspberry Pi PiCorePlayer Setup (Audio Player with Touchscreen) 

Cheers for the info but never had a problem with the Joggler Skin

@@Eyerex I am a problem magnet, so I am not too surprised. 😉

Thank you for the comment

Glad I could help!

you all probably dont give a shit but does anybody know of a tool to get back into an Instagram account..? I stupidly forgot the password. I appreciate any tricks you can give me!

@Alexander Sam instablaster ;)

@Lukas Korbyn I really appreciate your reply. I found the site through google and I'm in the hacking process atm. Seems to take quite some time so I will get back to you later with my results.

@Lukas Korbyn it did the trick and I actually got access to my account again. I'm so happy:D Thank you so much you saved my ass !

You can use ever you won't see any difference

From Picoreplayer site 32-bit version is usually more extensively tested. Best for older Raspberry Pi's. 64-bit Should work on all quad-core Raspberry Pi's. Best for newer Raspberry Pi's. But i normally use the 32 bit version even on a Pi4 but it's up to you

Hello Picoreplayer should see the LMS on your network which the Mycloud is connected to or do you also have a LMS running on the Pi as well ?

@@EyerexThanks for the answer. I’ve got a LMS running on the Pi to shutdown the computer. Better keep the Pi running all day long 😅

@@albertocossio6545 What happens when you add the ip address of the Mycloud plus the folder where your music is stored to the Logitech Media Server page settings

Fixed! Right now is scanning the WDMyCloud 🤞🏻 All working like a charm. I’ve given the old Mac -which used to run my LMS- a break. I own two working Logitech Squeezeboxes touch, but I must have a computer always on to run LMS. Now the Pi and this amazing software do it all. Thanks again!

@@albertocossio6545 Good to hear you got it working :)

Hello no never used as my dac runs into my amp but have read that it can be done so fingers crossed this helps forums.slimdevices.com/showthread.php?107001-ANNOUNCE-SqueezeButtonPi-Tool-to-use-buttons-and-rotary-encoders-on-a-RPi

@@Eyerex thanks for the reply. I had found that thread and am trying my best to make sense of it all 😊. Good news is i built the rest of it today and got picoreplayer up n running. Just need to figure out how to get it to pull music from my dlna server now

@@TheKhirocks I've run mine before with music on hard drive connected to router let me know if you need some help

@@Eyerex Legend for offering to help! I must have some missunderstanding of how dlna works. I had enabled DLNA on my Plex server and assumed i could use picoreplayer to stream from that. Couldn't figure it out so i installed LMS and then mounted a CIFS share where my music is stored on my NAS and pointed the LMS library at that. Seems to work, just need to wire up the speakers and figure the rotary encoder out. Thanks!

Not something i've tried but will have a look for a remote

@@Eyerex thank you so much. A lot appreciated. I think it can be useful as well

@@Franceyou Thinking of buying this one or was you thinking of something else ps must be cheap :) www.hifiberry.com/shop/accessories/wireless-remote-control/

Normally when your running the server and player on the same Pi it should come up without having to do anything, just wondered if you go into Settings then Choose Player whats being listed ?

@@Eyerex Thx mate, I think it's because squeezelite was deactivated

Hello what Pi version are you using 3,4 or 5

Fingers crossed this helps but have a look at Step 5 docs.picoreplayer.org/projects/add-a-5-inch-hdmi-lcd-spi-touch/ if you need more info i would ask on the Picoreplayer forum forums.slimdevices.com/forum

@@Eyerex Thanks for the reply, I tried 6 different OS's so far and settled on picoreplayer, everything great except for my problem.

@@Joemama-km9np Personally i would stick with the Official Raspberry Pi 7" Touchscreen as it works out of the box with Picoreplayer i know it's a little bit more expensive than other screens of about the same size but it just works without any messing about

@@Eyerex Thanks but I have that one also, works great. Just wanted something bigger.

Hello i use the official Raspberry Pi 7" Touchscreen which is plug and play no extra drivers needed

In the video i'm using a Pi3 but in the past i've used a Pi2 which worked fine

Hello i've never used Kodi but does this help kodi.wiki/view/Archive:XSqueeze

Hello what format is the drive nfs or other plus have you installed the extra file systems

@@Eyerex Hi. I switched from USB 3.0 to USB 2.0 and everything seemed to click into place - not sure why but it did. Thanks for getting back to me. Everything seems to be working...for now!

@@mikeymeally Strange i use a Pi3 so can't test the USB 3 but wondered did you use the 32bit or 64bit version of Picoreplayer as not sure if that will make a difference

@@Eyerex I switched from USB 2.0 to 3.0 and it's working fine now. To answer your earlier Q, I downloaded the 32bit standard version. Is the 64bit version better? I am having problems getting it to run via wireless, though, which is what I need for my music system (upstairs). It runs no problem via ethernet from router (downstairs) but when I disconnect and try run wireless it can be detected but not connected. Orange Juice app on my phone can't connect to it either. When connected via ethenet pCP gave me an IP address for wireless but it keeps saying it takes too long to connect when I put it into Chrome. Very frustrating! Any ideas about how to solve?

@@mikeymeally Not sure what's better or any difference with the 32 or 64bit versions other than it can use more of the memory and may run a little faster but not sure if you will see a difference. Did you setup the WiFi before setting anything up like i did in video as the Picoreplayer with have a different ip address when using WiFi or Ethernet

If you install extra apps it will ask you to resize so i just do it first

@@Eyerex Thanks for the reply! I had some issues doing that first and had to reinstall...likely my fault. Cheers

@@DistroUser When it does a resize leave your pi for a couple of mins to finish

@@Eyerex thanks E!

What screen are you using ? plus if Jivelite has messed up log-in to your picoreplayer then tweaks tab / and you will see reset just under Jivelite Setup

Bit of a strange one and not something i've heard people do :) Is your record player one with a USB output ?

@@Eyerex yes i have the Audio-Technica AT-LP5 which comes with usb out to rip via audacity etc. but im planning to use it instead to hookup to picoreplayer and play multiroom music around the house.

@@lixxus-m Ok will have a read to see if it can be done or maybe if there's a plugin about to make it easy

Hello does this post help forums.slimdevices.com/showthread.php?109495-Streaming-Line-Audio wouldn't mind testing myself but my record player (rega) is a normal type so will have to find a usb output device from somewhere

Will have a tinker later to see what it looks like as that's a very wide screen

Things will need to be moved about and resized as it will look like this otherwise ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Px4Rni3JtcU.html

PS have you tried these settings docs.picoreplayer.org/projects/add-a-waveshare-7-9-inch/?fbclid=IwAR3BCUEblSE_-69ylMKzDLe-LcdjxgCRpNg1i_LE8wyvs_XaAKv334k3nG4

@@Eyerex this does not look good 😊

@@Eyerex it's seems a bit complicated for me

Hello i use a Meridian Explorer 2 DAC which lights up Blue when playing MQA files so yes it should be fine just make sure to set Volume Control to Max within LMS settings

@@alessandrotesser7157 Yes everything works fine can do a little video to show tomorrow if it helps

@@alessandrotesser7157 Hope this helps ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ssU9BmJ6rX8.html

Today I tried but not all maq are correctly delivered to my Dac....

@@alessandrotesser7157 Are your audio settings the same as this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ofZ7ULb_y2A.html