A lot of us have older Raymarine Sailboat instruments and are looking to add a Axiom unit to them. A video on how to hook them all together would be awesome!
Hi Chris. Its easier than you might think. You'll need the SeaTalk to SeaTalk NG converter (E22158) featured in this video. Your current line SeaTalk instruments will connect through the Yellow port. A new Axiom will connect to one of the the white ports on it. A power cable is included in the kit to power up the converter, and that's about it. Your instrument data is converted to SeaTalk NG and shared with Axiom. Axiom's navigation data is converted to SeaTalk 1 and shared with your instrumentation. It is all pretty seamless.
@@RaymarineInc Thank you, I saw that and figured after watching that was it. Really informative video I hope you keep making them. My buddy owns a Sabre 34 and I have a Cal 33-2, we are both pulling the trigger on the new Axiom + and we both have 2005-2009 Raymarine sailing instruments. I will send him a link to this as well. Is there a good number or email if we run into questions while doing this upgrade?
You answered many of the items I was wondering about regarding my new AXIOM + so thanks for the explanation. I would like to see more presentations on how to use the AXIOM - it was very enlighting.
Thank you for watching, Paul! More episodes will be coming! I noticed the video you are commenting on here is one from our 2021 season. There are a bunch mode Axiom-related ones in that playlist, and in our 2022 season too on RU-vid.
Thanks. I am tackling the install of the P70s and EV1 and run it with my existing older Raymarine plotter. Now I feel confident understanding the backbone system. Cheers.
@@RaymarineInc could you tell me if I need any special converter or connector to use it with my Raymarine e7D. Or is the white connector at the back of my chart plotter compatible ? Cheers
Would like to see 1. Basic settings at first startup of an axiom systems. 2. More advanced setting 3. Intergrations of other nmea2000 connected devices, for instance nmea 2000 stereo, fusion for example. Intergration of C-zone systems or other digital switching. 3. Basic and advanced settings and usages of radar and sonar. 4. Go through possible screens and usages on an i70
Thanks for bringing me up to speed on the new Axiom+ model I just bought. I did not want to purchase equipment that would not serve a purpose, with this video, I have a pretty good idea what needs to be purchased to network old, and new instruments.
Thank you for watching and commenting, Mike! I hope you enjoy your new Axiom+. Please be sure to share our channel with the other Raymarine boaters you know.
@@RaymarineInc hey Jim currently sailboat has C80 chartplotter with St6002 autohelm , a st 60 display which leads to a through hull but these are no longer functioning...as I have already installed a multi display for my wind instruments which displays speed and depth as well I am limited in funds but believe I would like to purchase the Quantumor quantum 2 as well as your Axiom +. 9 RV Nav with no transducer. Will the auto. Helm work within thenAxiom?
This was very interesting. I am In the process of purchasing my first boat and the MFD is Raymarine so it will be interesting to see how all the devices are networked together. The boat doesn't currently have Radar so that is something I will be adding along with AIS.
Fantastic video, I have a brand new array of Raymarine products to install of my sailboat. I was going to contract a installer but now I feel I can do it myself and it looks rather simple. Thank you.
Great Job...Very informative, especially regarding details of NG network which I have found difficult to find i, in particular power distribution on the network. Many Thanks! The product cam was very effective.
Great ! I have 2 x Axion 7 (firmware 3.13.103) + Ray 50 + CAM 220IP + Switch Seatalk HS5 all linked on my boat running together (via NMEA2000) with a Mercury VesselView 703 + VesselView Link and i can see all information from my 2 x Mercruiser engines at my Axion´s also receiving any alarms from Mercury. Works like a charm !
Thanks so very much! From this information I should be able to hook my old seat talk one system up to my BNG Zeus 2 from my old sailboat. Someday I can purchase an axiom when I get more money.
SUGGESTION: ENLARGE the cursor...and COLOR IT YELLOW. Better contrast with the WHITE background...easier to follow which components you're pointing at. (Through Windows Ease of Access).
Nice info, perfect for my knowledge level, I will be spending more on raymarine!... CORRECTION... respectfully, Android Ray Apps are many years old and are frankly abandoned at this point. They do not interface with current android OS versions in many cases... There are numerous comments begging for them to be updated like apples apps. Thx for the great info though.
How do I clear this error - 'Data selection not possible' ? GPS does not register on my VHF Radio, I have a Raymarine e127 MFD and Raymarine Ray55 VHF. Just got back to the boat, unplugged the SPX30 and P70, booted up the e127 MFD, I was able turn on the internal GPS, and saw NMEA 0183 network, AIS was able access the GPS signal.
Hello Michael. Your network appears to be using newer electronics and some older equipment. Newer devices like your e127 support a protocol called Multiple Data Source Selection (MDS.) This allows you to have more than one data source for key navigation data. For example you could have 2 GPS sensors, and MDS allows you to choose a primary one to use and reserve the other as a backup. MDS works for other sensors like depth, speed, wind, time and heading. Older devices don't always support MDS because they were made before it was a thing. Your SPX30 autopilot is one of those older items that does not support MDS. There is a menu on your e127 that would normally allow you to select a preferred source for things like GPS and other sensors, if the system allows for it. In this case the SPX30 is blocking you from making any selections. If you are in a situation where you much choose a GPS source, the way to do it is to temporarily turn off the SPX30 so it drops offline. Make the change on the e127, then turn the SPX30 back on. Otherwise, you should be able to clear the message and proceed as normal and the e127 will automatically make a selection for you. We do have a support article about MDS here with more details: forum.raymarine.com/showthread.php?tid=107
dont know if anybody is still monitoring this , but my question is with using the seatalk ng cables, each device does not have to run its own power? im going to be using a used c120 plotter/radar , ev-100 wheel pilot , and nmea wind instrument. so the power supply is taken care of through the one network cable?
Thank you for watching the show! Apologies for the slow reply while we were at the Miami Boat Show. The SeaTalk NG network provides power to smaller devices like instrument displays, autopilot controllers, compass sensors (EV-1, EV-2), GPS sensors (Raystar 150, AR200), wind and weather stations, and similar types of small equipment and sensors Chartplotter screens, MFDs, radar systems and the mechanical parts of the autopilot all have their own dedicated power feeds and cannot be powered from the SeaTalk NG network alone because they require more current than can be safely passed across the network cabling. Your C120, for example, will have its own dedicated power cable. Its connection to the network allows it to pass data, but it does not draw power from the network. The EV-100 wheel pilot's ACU-100 will have a dedicated power connection in addition to a network connection. The dedicated power connection ensure the ACU has enough current available to turn the wheel drive unit.
Hello Michael. It sounds like you have a depth instrument, perhaps an i50 Depth or i50 Tridata. These devices are connected to an onboard network called SeaTalk NG or NMEA 2000. That network is powered independent of your chartplotter. Small devices like those depth instruments receive their power directly from the network backbone. Depending on how your installer wired things up, the network backbone could be connected to a circuit, switch, or breaker that is independent of your chartplotter. The chartplotters almost always have a power feed independent of the data network because they draw much more power than the smaller sensors and instruments do. If your depth instrument is always on, you may need ask the installer what circuit it receives power from, or trace the network wiring to locate where it's source it located.
This is a fantastic insight into what most would consider a 'black box'. Thank you for making it so simple. I have 2004 ST instruments and a c70 (I think) MFD> How can I integrate a Garmin CV74 into this system and use it for readouts of the various wind/boat speed/depth/autopilot instruments please?
I believe the chartplotter you have is a Garmin Echomap 74CV. That plotter has NMEA 2000 networking that can be used to integrate it with other devices. Your 2004-vintage instruments support Raymarine's SeaTalk networking, which is a bit older standard. To make them all communicate with each other you would need a Raymarine SeaTalk to SeaTalk NG converter kit, part number E22058. This device will connect to your boat's existing SeaTalk network and will do the translation between the older SeaTalk language and the modern SeaTalk NG protocol. SeaTalk NG is Raymarine's cabling system for carrying NMEA 2000 information. The last thing you need is a Raymarine SeaTalk NG to DeviceNet adapter cable, part number A06075. Plug the white end of this cable into one of the white ports on the converter. Screw the metal end into the NMEA 2000 port on the Garmin chartplotter. This should allow the plotter to see depth, speed, wind and compass heading from your instruments and autopilot. It will allow those devices to see GPS, COG, SOG, Waypoint and Route information from the plotter.
If the original Seatalk 1 network has connectivity through a ST converter (yellow port), can one connect the SEATALK1 to SEATALK ng CONVERTER CABLE (A06047) to the white port of a tee father down the line to connect additional seatalk 1 ST60 devices to the network ?
If all of your ST60 instruments are currently connected on the same SeaTalk network, then only 1 SeaTalk 1 to SeaTalk NG converter is needed to bridge data for all of them. Simply insert the converter at the point closest to which both the SeaTalk 1 and SeaTalk NG networks are close together. If from a wiring standpoint it is easier to have separate strings of SeaTalk 1 devices converted and connected to the SeaTalk NG backbone, then it is acceptable to utilize more than one converter to support each set of instruments.
Hello John. Most of the system is grounded through its 12V DC negative lead. Some device do additionally have shield wires, drain wires, or even dedicated grounding point that can be connected to the boat's grounding plate if it has one. If you have specific products in mind feel free to shoot me an email. james.f.mcgowan@raymarine.com
Hi. About to install my Ev 100 with autohelm wheel steering. The manual shows a typical system with the backbone going from the 5-way connector to the ACU100. In my case, I'd like to use the longer backbone cable to go to the EV-1 Sensor/gyro. Is that ok? I assume I'd use a T connector at the gyro end with a terminator in one plug and the gyro in the other plug. Is that right?
Yes sir. You can use whatever combination of lengths works best to reach your components. The EV-1 compass sensor, the p70s pilot controller and the ACU-100 each will need to plug into a white spur socket. You can use T-Connectors or 5-way connectors interchangeable to make enough connections as needed. Just make sure your final blue backbone ports at each end have your terminators plugged in. When all is done, you will have NO empty blue ports. Every blue port will have either a backbone cable or terminator in it. You may have empty white ports, for future expansion.
You will need a network switch for that system. The Axiom 9+ only has a single Raynet network port. Both the radar and that sonar module need to be connected. We currently have 2 network switch options in our lineup. The HS-5 (A80007) has been out for many years and offers 100 megabit speed on 4 of its ports, and gigabit on the 5th port. The RNS-5 (A80731) is new and offers Gigabit speed on all 5 of its ports. For your system, either one would work just fine. At the moment the RNS-5 is probably easier to find in-stock.
I have an eS97 at my flying bridge helm, and an A75 down below. I have them connected with Seatalkng. I am getting my AIS targets on both MFDs, but I’d like to see my Navionics chart on both screens, but can’t seem to get that to happen. Seriously, do I need to buy ANOTHER SD card? The eS97 is at the end of the Seatalkng, but has its own power cord. I also have ACU 200 and EV1 course computer in the mix, un-tried since adding this new to me eS97. Also can’t get Bluetooth between the MFDs. WiFi is on and says connected.
Hello Dan. Your eS97 and a75 will share charts (and much more) if you link them together with a RayNet high speed Ethernet cable. There is a port on the rear of both units for this. The Navionics charts will be shared, as will any fishfinding sonar, thermal cameras, marine cameras, radar scanners, etc. SeaTalk NG is a low-bandwidth network that carries navigation data, pilot data, AIS, etc. It doesn't have the bandwidth though to share charts or other data-heavy sources. It does have to be a wired connection. It is not possible to share information MFD-to-MFD using Bluetooth or Wi-Fi. Those connections are used for other functions like connecting to an audio source, connecting a SmartPhone or Table to Axiom, or linking to a wireless Quantum radar.
Hi Russell. There are several different manufacturers and configurations of fuel senders out there. Some of them are resistance units that output an analog signal while others are "smart" senders with active electronics outputting fully formatted NMEA2000 sentences. Feel free to shoot me an email with some photos of what you have and I would be happy to help figure out the best strategy to connect them. james.mcgowan@raymarine.com
This was brilliant, really de-mystified the NMEA concept, and I loved the product view camera. I bought a 1999 Catalina 42 with original electronics and I’m now feeling more confident about switching everything out. I do have one question about the transducer. I imagine I would get a lot more data and info from a newer transducer, but I’m understanding from this video I could technically continue to use the old one, correct? If I were to upgrade the transducer too, do I need to haul out in order to do that?
Hello Daniel. Thanks for watching the show! If your existing depth, speed and temperature transducers are working and appear to be in good shape, yes, the iTC-5 module would allow you to keep using them with new instruments and devices that use SeaTalk NG and NMEA 2000 information. If you upgraded to a newer transducer, the core information remains the same (Depth, Water Temp, Speed/Log), but you do gain some accuracy improvements in the Speed sensor. The newest DST810 Gen 2 Smart transducer has some additional sensors inside to measure the pitch and roll of the boat. Using that added information the speed sensor can be calibrated with heel-compensation to enhance the overall speed accuracy. The transducer has Bluetooth built-in and all of the calibration and setup functions can be done using an app on your Smartphone or tablet. This transducer is not dependent on any particular instrument screen or MFD. It outputs fully calibrated depth, speed and water temperature to the NMEA 2000 and SeaTalk NG network. That data can be displayed by our Axiom-series chartplotters, as well as i50 and i70 instruments. If you have ST40 or ST60 instruments onboard now, those could also be fed data from the DST810 transducer by using our E22158 Seatalk to SeaTalk NG converter module. You'd reset those instruments to operate in "repeater" mode, as instead of using their own dedicated transducers they would now be getting and displaying date from the smart transducer instead. www.raymarine.com/en-us/our-products/marine-instruments/instrument-transducers/dst810-gen2-smart-transducer The DST-810 transducer can be retrofit into many popular Airmar through-hull fittings. This video describes how to do it. Gemeco Marine Accessories and the parts and accessories branch of Airmar, who manufactures these transducers. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LkGzlsHGnLk.html
Question about Raynet. Around minute 25, you said something that sounded like the seatalk connection is made to the chartplotter which is the master. Suppose I have two axioms, one on the flybridge on in the pilothouse. I get that the two Axioms are connected by Raynet. But, what about seatalk/nmea2k devices? Can I connect seatalk only to the axiom which is designated as the master? Or, can I have have seatalk coming off both axioms?
Hello Robert. While you can connect SeaTalk NG/NMEA2000 to every Axiom on your network, only the data master actually communicates on the network. The data-master Axiom manages all communications to/from that network. Any other Axioms receive their data through the RayNet Ethernet connection, from the master. One of the main reasons we do it this way is to help minimize the wiring required for Axiom displays mounted on towers, flybridges or other remote locations. An Axiom with just a power connection and slim RayNet Ethernet connection has full connectivity to all of the boat's sensors and data.
@@RaymarineInc Lets see if I understand. Suppose my flybridge Axiom is the datamaster, and the flybridge and pilothouse Axioms are connected by Raynet. That would give me radar and sirius XM weather on both Axioms, plus let the two Axioms share one Navionics chart subscription - right? If I have seatalkNG/NMEA2k devices physically located in the pilothouse, they would have to connect to a SeatalkNG cable run that is connected to the datamaster axiom on the flybridge?
Hi I have a Raymarine HD Color Model E52069E on my 2016 AZIMUT 50. This week sudenly stopped working. It shows Not Detected (OFF) I tried to turn it on from my 4 different screens and nothing. Do you know what I have to check or replace? We checked continuity and it seems to have good wiring and voltage. I opened the antena (radar) and is receiving energy buy not working. Any suggestion of what to replace or repair? Thanks
Hello Omar. I am sorry to hear that the radar has stopped working. If you are certain there is power available all the way to the end of the radar scanner, then most likely there is an internal fault inside the scanner preventing it from starting up. To troubleshoot further it would need to be checked out by a radar technician who can dig into the radar's internal components. Your local Raymarine dealer can assist, or you could ship the scanner unit to our factory service center. www.raymarine.com/service-and-support/warranty-repairs-returns/
I have an eS97 at my flying bridge and a A75 in my wheelhouse connected by Seatalkng. I have connected them by WiFi but can’t get them to connect with Bluetooth. Also, shouldn’t I be able to show my Navionics SD chart on both units, with just the one SD card? I know something is working between the two as my AIS data shows on both MFDs.
Hello Dan. Your eS97 and a75 will share charts (and much more) if you link them together with a RayNet high speed Ethernet cable. There is a port on the rear of both units for this. The Navionics charts will be shared, as will any fishfinding sonar, thermal cameras, marine cameras, radar scanners, etc. SeaTalk NG is a low-bandwidth network that carries navigation data, pilot data, AIS, etc. It doesn't have the bandwidth though to share charts or other data-heavy sources. It does have to be a wired connection. It is not possible to share information MFD-to-MFD using Bluetooth or Wi-Fi. Those connections are used for other functions like connecting to an audio source, connecting a SmartPhone or Table to Axiom, or linking to a wireless Quantum radar.
Hi, great video. But I can't figure out; how do I start and shutdown all my networked Axiom's at once? It's a pita to walk around the entire boat to shut off and turn on each unit on its own. Garmin has this feature where you long-press to switch networked units on/off. Thanks in advance!
Hello Johan. Axiom does not have network-wide shutdown though its an interesting idea. That said though, if you turn your battery switch off at the end of the day, or just flip the master circuit breaker to your electronics, that is fine and won't harm Axiom. In fact, it is designed to remember its power state just for this type of instance. Displays that were on when power was last disconnected will automatically turn back on. Displays that were manually switched off (or remained off) during last use will remain off at next use.
@@RaymarineInc Thanks for the reply. In that case I will program my EmpirBus to cut power to all Axioms. But yeah some kind of network feature to turn off or dim various displays would be cool. I also have two autopilot control heads and multifunction displays that is a lot of walking to turn off/on.
I have a Raymarine ST4000+ Autopilot with a control head screen which is unreadable due to sunburn. The unit still works. I also have an ST290 MFD doing nothing in the shed. Can the MFD control the autopilot wheel drive (probably not) or can I network the MFD and the ST4000+ and then control the autopilot via the MFD?
Unfortunately your options are a bit limited here. If your pilot is setup and calibrated already, you could add an S100 or SmartController wireless autopilot controller to your system. The receiver for this device plugs directly into the SeaTalk network and lets you remote-control the pilot. You cannot do any calibration or setup of the pilot from the remote though, hence the reason it needs to be already setup, calibrated and functioning. These are the units here: www.raymarine.com/autopilot/accessories/smart-controller/ The ST290 display on its own won't control the pilot. Back when ST290 was in production we did offer a ST290 autopilot keypad accessory that worked with the system. If you could locate one of those, and all the cabling to go with it, you could control your pilot from it but you would be on the hunt for equipment out-of-production for many years. Unfortunately the ST4000+ can't be controlled from a multifunction display. Our Axiom-series models can control our Evolution-series pilots but unfortunately not the ST4000+, which is from an older generation.
Im looking to integrate an Axiom 7 at the helm station , is it possible to integrate the axiom in with an e125 ? will they work together if the MOB is pressed or will they share waypoint information?
If you link them together, you can only do so using SeaTalk NG or NMEA 2000. You won't be able to link then using RayNet high speed Ethernet. Through the STNG/NMEA 2000 connection they will both have access to GPS information, current waypoint, depth, speed, wind, etc. Triggering MOB on one should trigger it on the other. You won't be able to share charts from one unit to the other, and you won't be able to share the radar scanner or sonar picture.
I hope this is a simple question with a simple answer. I have an E70339 transducer that will connect to an Element 12hv. I have an i40 depth display that I want to use instead of displaying depth on the Element. How do I make that connection?
Hello Lou. You can display depth on the i40 instrument, as calculated by your CPT-S E70339 transducer and Element-S. To make this work you will need 1 more accessory, our SeaTalk to SeaTalk NG converter kit (E22158.) Element communicates using a newer communication protocol called SeaTalk NG, while the i40 uses our original SeaTalk. This device converts the data stream back and forth. You will also need a A06075 DeviceNet to SeaTalk NG adapter cable to connect Element to the converter. Since the i40 instrument will not have a transducer of its own connected you will need to go into its setup menu and make it a data repeater, rather than a data master. This turns off its internal echo sounder and forces it to look to the SeaTalk network connection for a source of depth to display.
Seatalk High Speed is the older term for our high-speed Ethernet networking system. We have several generations of network switches out there that work with Raymarine systems. The data flowing through these cables and switches is all the same. The connector system was improved over time for better connectivity and water proofing, and the network speed has been increased in the latest generation devices for more bandwidth. The original 5-port network switch used computer-style RJ45 network connectors, like you have on your wired home and office computers. These were considered "Seatalk High Speed". This is a 10/100 speed switch. The HS5 was the next generation to follow. Instead of the home/office style connections we went to the waterproof, twist-lock connectors used today. This is called RayNet. The HS5 is a 10/100 speed switch too. Last in 2022 we released the RNS-5. This is the current generation high speed network switch, using the twist-lock and waterproof Raynet connector. This is a Gigabit speed network switch, for faster throughput. Gigabit speeds are nice to have if you have multiple cameras on your network. This year we also released the RNS-8. This is an 8 port, Gigabit speed, RayNet switch. 4 ports are "standard" ports, and the other 4 ports support Power over Ethernet (PoE.) PoE can be used to power smaller cameras like our CAM210 and CAM300 IP cameras, as well as the RMK-10 keypad, and FLIR Joystick controllers.
Hi James, many thanks for your many very useful explanations every thursday. I bought a new Axiom+9 MFD and like to connect my old ST60+ devices with the converter to seatalkng. Is it right, that I don't have to connect an extra power connection into the seatalkng-backbone? I've been told that the backbone gets its power from the old seatalk-1 connections. So I only have to connect the Axiom to power.
Hello Ulla. The Axiom will have its own power connection. In this instance you'll be adding a SeaTalk NG Device (Axiom) to an existing SeaTalk network so you'll follow the diagram 4.6 in the SeaTalk to SeaTalk NG Converter instructions. Your existing, powered SeaTalk network will power the converter. Axiom will plug into one of the white Spur connections on the converter. You will also need to plug in the 2 supplied STNG terminators into the converter's blue backbone ports. The handbook is available online here if you'd like to take a look. Your setup is on page 23. raymarine.app.box.com/s/p6alhxp7tter95anbgqa/folder/1787231967
i have a EV100 autopilot on seatalkng and a separate network switch HS5 that connects my Radar, AIS and Axiom. I want to connect by EV100 to the HS5 so I can see my autopilot on the Axiom. Is this possible. I spent endless hours searching Seatalkng to Raynet to no avail. Any Ideas?
Your Axiom screen should be plugged into both the RayNet high speed network as well as the SeaTalk NG network. Run a cable between Axiom's Network port and one of the empty ports on your HS5 network switch. You'll also connect your radar to the HS5 network switch. There are 2 legs on the Axiom's power cable. One leg provides power to the unit. The other has a 5-pin, threaded DeviceNet NMEA 2000 data connector. In the kit with your Axiom was a DeviceNet to SeaTalk NG adapter cable with a white connector on the end. Attach this adapter and plug it into any empty white port on the SeaTalk NG network. This will allow Axiom to see and control your autopilot, get data from your AIS, and share information with other network instruments. The RayNet network is Ethernet-based and carries high-speed, high-bandwidth information like radar, sonar and camera feeds. This network also allows multiple Axioms to share a single map card. The SeaTalk NG or NMEA 2000 network carries low-bandwidth navigation and status information like GPS position, course, speed, depth, wind, heading, AIS, engine parameters and similar.
What is needed to connect an RS12 gps antenna to the Axiom 9? Is it Seatalk to NMEA2000? I don’t think I need an entire network because the Axiom has an input and I only need the external antenna
Hello Danny. Please double-check which GPS sensor you have. The Raystar 12 GPS sensor is an older model that was specifically designed to be used with our A60 and A65 Fishfinder/GPS combo units. That sensor outputs NMEA0183 sentences, and plugged directly into those models. That GPS sensor and the screens it worked with have been out of production for about 10 years. Its really not worth the investment in adapters and cabling you'd need to buy to make that GPS sensor work with Axiom. Based solely on its age, its likely the RS12 will also need a battery service soon in order to keep working. You mentioned having an antenna connection on your Axiom 9, which makes me ask if you have an Axiom 9 Pro model? Those units have a BNC antenna connection on the back that is used with a GA150 GPS antenna specifically. That antenna is a passive design that pulls GPS signals from the air and delivers them to the Axiom Pro's internal GPS receiver for processing, bypassing the under-the-glass antenna. The GA150, part number A80288, costs about $150.00 US. If your Axiom 9 is the all-glass touch version (Axiom 9, Axiom 9RV, Axiom+ 9, Axiom+ 9 RV) those models do not have a direct GPS antenna connection. If you need to add an external GPS receiver to them you would want to look at a Raystar 150 GPS sensor, or an AR200 Augmented Reality module. Those sensors are active GPS sensors. The signals are processed inside the puck, and the data is output as SeaTalk NG/NMEA2000 sentences. You would need to build a basic STNG backbone, and then connect Axiom and the GPS to it. Our SeaTalk NG starter kit, part number T70134 is a quick and easy way to build a small network like this. Feel free to email me if you need more guidance. james.mcgowan@raymarine.com
Hello Paul. LightHouse 2 Version 19.03 is the latest, and final software release for the e95. You can get it on Raymarine.com here: www.raymarine.com/en-us/download/lighthouse-2-software
Man I was under the impression the Axiom 7 connected directly to a seatalk NG backbone that's messed up how they have an nmaa 2000 connector instead of a seatalk NG connector.
Sorry for any confusion. Axiom displays are all fitted with NMEA 2000 connectors. Over time you'll start to see more and more Raymarine products swap over to standard NMEA 2000 connections. We do offer a lineup of adapter cables to make it easy to swap from one format to the other as needed though. Most Axiom models also include an adapter cable in the box to make the conversion too.
Hello Billy. I'd need to know specifically what GPS you are connecting, and what you would like to plug it into. Nearly all of our GPS sensors today plug directly into our SeaTalk NG data network using a pre-configured spur cable. The GPS sensor receives its power feed and shares information with the network through that connection. Other chartplotter and MFD displays, instruments, etc. are similarly plugged in as spurs onto the common data backbone. These sensors, like our Raystar 150 or AR200 can also be connected to a modern NMEA 2000 network using an adapter cable to change the plug style. Some of our older GPS sensors were available with SeaTalk, NMEA 0183, or with combination outputs that could be switched by changing up the wiring and combining certain colors together. Please feel free to send me an email to james.mcgowan@raymarine.com with the details on what you are trying to connect up.
@@RaymarineInc James thanks for the reply, I have an old C-70 radar and It doesn't have a GPS input, and the deplay tells you no GPS. it has a seatalk and a seatalk 2 connection points on the back of the display. I have a GPS mounted with a cable with three wires coming down to the back console area from that gps. The GPS is an old one and the boat doesn't have the new backbone stuff yet. The radar works great just doesn't know where it's at. I was trying to get by and not buy a new gps and was needing help to get this one into the radar system.
Hi Chad. You could potentially do either one, or both. If you go the tablet-only route you'll load our RayConnect app on your tablet. The screen from your Axiom 9 is repeated on the tablet and it touch-controllable just the same as it is on your Axiom 9. Keep in mind though that what you see on the tablet is exactly what is on the Axiom 9, so you can't look at different apps in different locations. If you went with another Axiom on your flybridge you have the benefit of independent control. Someone below could be looking at chart while on the flybridge someone else is using Radar and Sonar. You'd still be able to link a tablet or Smartphone too, giving you the ability to roam around the boat and see what's happening on the display you are linked to.
Great video, thanks for sharing. On my sailboat, I have an N2k network connected to a Seatalk NG network. Water Depth is currently available on the N2k network. I am interested in using an old ST40 Depth Display I have. If I get the Seatalk 1 to Seatalk NG converter, will this publish the depth data to Seatalk 1 so it can be displayed on the ST40?
Yes. The SeaTalk 1 to SeaTalk NG coverter (E22158) is bi-directional, so your ST40 instrument will be able to display depth from the NMEA 2000 network. You will need to switch the ST40 into "Repeater" mode, which is available in its menu setup. This turns off its onboard sonar transceiver and transducer connection, and causes it to look at the SeaTalk connection for an alternate source of depth information than itself.
I have a 2021 170 Montauk with an Axiom 9. My outboard has a Mercury vessel view module contained inside. I usually monitor my engine via my cellphone. Can I Bluetooth connect the vessel view to my Axiom 9 and monitor there? If so can you give me directions?
Hello Robert. Mercury offers several different modules for outputting engine data to outside devices. There is a very specific one called the SmartCraft Connect Gateway that is required to see official VesselView data on Axiom's Mercury app. It is a hardwired connection and cannot be linked with Bluetooth or Wi-Fi. You can see all the details on it here: www.mercurymarine.com/en/us/gauges-and-controls/gauges-displays/smartcraft-connect/ Your Mercury dealer will need to program this device to work with your engines before it can be installed.
The Axiom+ does not have Power-Over-Ethernet (PoE) capability. When you install your RMK-10 you will need to use the power cable provided with it, in addition to the RayNet cable. PoE is only found on the Axiom XL models.
Thanks for watching, Rob. That should be a very easy upgrade as both devices have the same SeaTalk NG cabling system. You have the correct cables and backbone already. Remove one instrument and replace with the other.
Just got a new boat and got a second axiom+ display added, but are only li ked by nmea 2k. Looking to link them together to share sonar. Is it possible to do this via wireless or do I need cables? Also if I do need cables can I connect them directly or do I need to go through a switch
You will need to link them with a Raynet high speed Ethernet cable for sonar sharing. Unfortunately the system does not allow doing it over wireless. If you have an empty Raynet network port on both Axioms, you can go directly from one to the other without a switch. Axiom+ displays each only have 1 Raynet port. If you already have radar, an external sonar black box, a thermal camera, video camera, or some other accessory connected to it, you will need a switch. Axiom Pro units have 2 ports, and Axiom XL have 3.
Very much wanted: build in POE possibility with your network switch. Using the separate device as shown throws out the rugged character of the Raynet structure to my humble opinion. I am a bit surprised that that ability isn't build in. It even could perhaps be intelligent allowing to add POE only for devices that support it.
We publish a SeaTalk NG Reference Manual that has a table and drawings of all of these connectors starting on page 2. You can download it from Raymarine.com here: raymarine.app.box.com/s/rvhycb6x1brzo64921k5tsqwv2ica3j6/folder/1787214721
Great presentation, these sessions help selling your products easier, because there is so much to know before buying and installing. When you say E80 radar will get swapped out for Quantum do you mean Raymarine will take the older radar back?
Thanks for watching! Unfortunately, no, we don't have a program to trade in the old radar scanners. In the upgrade scenario mentioned in this video the E80 screen was going to migrate to a newer unit. The Quantum radar would be the suggested replacement radar to go with it.
Thanks for watching the show! The audible alarms from Axiom are not transmitted to the mobile app at the present time. You can Bluetooth the audio out from Axiom to an external Bluetooth sound device (speaker, stereo head unit, headset) and hear it there, but I am not aware of a way to make the audio pass through to your phone.
hello. I have Raymarine element 9 and compass RS 150 element 9 has an output - a plug for connecting NMEA 2000, compass pc 150, cable with plug - SeaTalkng®. please tell me how to connect and configure the compass rs150 to element 9?
You will need to build a SeaTalk NG backbone, then connect your Element 9 and Raystar 150 to it. Our SeaTalk NG starter kit has most of what you will need. The part number is T70134. You'll also need Raymarine cable A06075, which is a NMEA 2000 to SeaTalk NG adapter cable. The 5-way connector serves as the backbone. Plug the 2 included terminators into the blue ports to terminate the network. Power the backbone using the supplied STNG power cable. That will leave you with 2 empty spur ports (white.) Plug the Raystar 150 into one of them. Then use the A06075 NMEA 2000 to STNG adapter cable to make the final connection between the Element's NMEA 2000 port and the last empty white spur connection. Since Element has an internal GPS of its own, and you are adding another one with the external Raystar 150, you'll need to tell Element to make the Raystar 150 the preferred source for GPS. Once everything is installed and powered up, on Element to Home...Settings...This Display...Data Sources. Select the GPS tab and you'll see listings for both the Element's Internal GPS receiver and your Raystar 150. Highlight the Raystar 150 and press the OK button to make it the preferred GPS source. A green check-mark will appear on the left indicating it is the preferred source.
Is the Rayview and Ray Remote still available or is it obsolete? Doesn't seem to work with Android phones. Also, will the Rayconnect take the place of Rayview & Ray Remote?
Hello VS. I am checking with our apps team to see what's up with RayView and RayRemote for Android. I wasn't aware that people were having issues with them on Android. I'll get the latest news and make an update on a future live session. Yes...the RayConnect app is our next-generation Wi-Fi app. Currently it supports integration with the new LightHouse Charts store, but other capabilities are planned for it.
@@RaymarineInc Great👍!! I hope you can get this issues resolved. Would love to use these features on the Axioms. Seems like on the Google play store there are issues as I was reading the comments. Again, Thanks for looking into it, and I'm looking forward to more how 2 Vid's, using the Rayview & Rayremote app.
Great video that helped me network my new Axiom and Raymarine AIS last spring. But I just got a new Raymarine S2000+ tiller pilot and I am really lost as to how to add the tiller pilot to my SeaTalkng network. I guess I need a converter kit but then I need a yellow tipped converter cable with bare ends. Which I don't see available. Or can I just used a regular SeaTalkng spur cable and tape off the red wire and connect everything else to the tiller pilot socket, plugging it in to the the white round end into the yellow socket in the converter? Help!!!
Hello Anne. To add the ST2000+ tiller pilot to your SeaTalk NG network you will use the E22158 SeaTalk to SeaTalk NG converter module. To make the connection to your pilot I suggest getting a D244 SeaTalk 3-way junction block, and then a length of conventional SeaTalk cable long enough to reach to your pilot. Plug the STNG to SeaTalk adapter cable into the D244 block. Then plug the longer cable into the block and run it to the pilot's socket connection point. At that end you will remove the 3-pin SeaTalk connector exposing the bare wires. The Yellow wire has the SeaTalk data and will connect to pin 4 of the socket. The shield wire is the ground and will connect to pin 2 of the socket. Since the SeaTalk NG network is already powered on your boat, and that provides power to the SeaTalk to SeaTalk NG converter module, you will NOT connect the SeaTalk red wire to the autopilot's socket. Simply seal off the end of the red wire so it does not come into contact with anything else, and tape it back.
Thanks for the video. Great information and explanations. My boat currently have one E120, one E80, one 2kw 18" Radome Radar, 2 GPS Antennas among other devices. I am upgrading it to one Axiom+12, one Axiom+ 9, two Axiom 7s and I wondering whether I could keep the original Radome and the 2 GPS antenna for now. If positive what will be necessary for the connection.
Hello JR. Thank you for watching. Your 2kW 18-inch radar is most likely an analog radar and is not compatible with Axiom. Towards the end of the E80/E120 era we began offering digital versions of our radar scanners. If you happen to have one of those it would work, but analog models will not. If your radar is plugged directly into the back of your E80 or E120 to its large radar connector, it won't work with Axiom. The GPS antennas can probably be made to work with Axiom through an adapter, but honestly it is not worth the cost to do so. Most likely you have 1 SeaTalk GPS antenna, and 1 NMEA GPS antenna. The SeaTalk antenna would need to be run through a SeaTalk 1 to SeaTalk NG converter (E22158) which costs about $110.00. The other antenna would need a 3rd party NMEA0183 to NMEA2000 adapter. If your current GPS antennas are of similar age to the radar and MFDs, they may already be on borrowed time with regard to their internal memory batteries, which will fail in time causing a slow time to fix, and if left unrepaired, acid damage to the circuit board. These older antennas will also soon be subject to GPS rollover. They will continue to deliver a position fix, but their date will permanently be off. The last such event was in 2019, and it will happen again in April of 2022 for another batch of old GPS receivers. Details here: forum.raymarine.com/showthread.php?tid=7453 Every model in our Axiom lineup has a built-in GPS antenna located on the front, top of the unit just behind the glass. As long as one of your MFDs is outside with a reasonable view of the sky, it can feed GPS to the rest of them. It will most likely be much more accurate than your older GPS antennas too because they can track many more satellites, as well as more than one GNSS constellation.
SeaTalk HS and RayNet are both high-speed Ethernet for linking together displays, scanners, cameras, etc. The data traveling over the wires is identical, the only difference between SeaTalk HS and RayNet are the physical connectors and network speed. SeaTalk HS components were all 10/100 speed Ethernet where RayNet supports up to Gigabit speed. We do make physical adapter cable that will allow new Axiom displays to connect with older SeaTalk HS cables and network switches. Part number A80160 is a short adapter cable with a SeaTalk High Speed female connector on one and, and a RayNet female connector on the other end. You'd typically use this if you were removing an old display with SeaTalk HS cabling, and installing a new Axiom. This adapter plugs onto the existing old cable and converts it to plug directly into an Axiom with a RayNet connector. You can see it in detail here: www.raymarine.com/en-us/our-products/networking-and-accessories/raynet/raynet-female-to-seatalk-hs-female-adaptor Part number A80276 is a 3-meter long interconnect cable with a SeaTalk HS Male, Waterproof connector on one end and a RayNet Female connector on the other end. The most common use-case for this would be if you were keeping older SeaTalk HS components working, but updating the network switch to a newer HS-5, RNS-5 or RNS-8 unit. Part number A80272 is a 400 mm adapter cable with a SeaTalk HS Male, Waterproof connector on one end, and a RayNet Male connector on the other end. This is most often used when upgrading a radar on a boat with older displays. Its used at the end of the digital radar cable to convert the Ethernet connection back to the older SeaTalk HS style. We also offer an assortment of RayNet to RJ45 network cables in assorted lengths. These have the waterproof RayNet ethernet connector (for Axiom) on one end, and a common RJ-45 Ethernet connector (clear plastic with a tab-lock) on the other end. Older SeaTalk HS network switches used non-waterproof RJ-45 connectors. Examples of these switches include the E55058 8-port STHS network switch, and the SR-6 combination network switch and SiriusXM receiver.
Hello Roger. The AutoTack angle is not adjustable in itself, but the way it works is that it tacks the boat to match the relative angle to the wind on the opposite side. So if you are sailing 40-degrees relative on a port tack, after initiating an AutoTack the boat should settle out and be 40-degrees relative to the wind on the starboard tack. Hopefully this makes sense. Here is the official excerpt from the pilot controller's handbook that describes how it works: Using AutoTack in Wind Vane mode The autopilot has a built-in automatic tack facility (AutoTack) which turns your vessel "relative" to the wind angle you're currently on, and then tacks the vessel to put you on the opposite relative wind angle. AutoTack is always relative to wind angle and is not adjustable. In Wind Vane mode: 1. Using a p70 / p70s: i. Press the [-1°] and [-10°] buttons at the same time to Tack to port. ii. Press the [+1°] and [+10°] buttons at the same time to Tack to starboard. 2. Using a p70R/ p70Rs: i. Select [Tack Port] from the main menu to Tack to port. ii. Select [Tack Starboard] from the main menu to Tack to starboard. When you AutoTack in Wind Vane mode, the vessel turns through the AutoTack angle. The autopilot will then trim the heading to mirror the locked wind angle from the previous tack.
@@RaymarineInc Okay. I don't have connection from my old 0183 wind instrument to the new EV 100. So I was wondering if I could change the 90 degree tack to say 100 without the wind data available. It sounds like you're saying, "no can do."
@@RaymarineInc So, when I want to tack 100 degrees, is it ok for me to hit +10 and +1 at the same time and then immediately hit +10? Or do I need to wait until it has gone through it's 90 degree turn?
What is the best way to get NMEA data to a laptop? We have a onboard wifi network. Can Axiom connect to that to send NMEA data to laptop? Can you ethernet from an Axiom Pro or Plus to a Wifi hub?
Hello Harley. There are a few different 3rd party manufacturers who offer NMEA gateway devices that can connect directly to a laptop to pass information to navigation software and similar applications. For example, I use an Actisense (www.actisense.com) wired NMEA2000 to USB interface here in the office to enable my network to communicate with the PC. They also offer a device that can send the data over Wi-Fi so you can be "untethered" and get data on your laptop, tablet, etc. Yacht Devices (yachtdevicesus.com) is another company that offers a range of devices to do this. The Wi-Fi connection on your Axiom is primarily used for linking Axiom to the Rayconnect or Raymarine mobile app on your Smartphone or Tablet, or to connect to a Quantum wireless radar system.
I'm just viewing this informative presentation. I'm in the process of updating all of the electronics on my sailboat to NMEA 2000 including, EV-400 auto pilot, Quantum 2 Q24D radar and Axiom + 9rv mfd. It comes installed with Navionics charts. Will I be able to add the Raycharts cartography to the MFD and have both chart systems on the MFD?
Hello Larry. Thanks for watching! Axiom can run more than 1 type of charts simultaneously as long as you have the necessary card slots to plug them in. The Axiom 9+ has a single microSD card reader on its rear. Your Navionics charts will be plugged in there. To add LightHouse Charts in addition to Navionics you will need to add our RCR remote card reader accessory to your system. The part number is A80585. It plugs into the micro USB connection on the back of Axiom, and can be surface or flush mounted near your screen. Plug the LightHouse charts in there and Axiom will read both chart cards. It is also possible to load LightHouse Charts to the onboard memory on Axiom+ if the chart region is small enough to fit. You'd need to actually purchase the charts using the Raymarine app on a Smartphone or Tablet, then transfer them to your Axiom via Wi-Fi. The Axiom+ has 16 GB of onboard storage (though some is used by the operating system.) Our North America chart is normally too large to fit, but our other worldwide regions have a much smaller footprint. We are working on some options so hopefully you'd be able to do the same with North America too. Navionics does not permit their charts to be moved from their microSD cards, so they are always plugged in.
Do you have a diagram for the Raymarine networks on various boats? I have a whaler 405 conquest and would love to know where all the equipment is. I can see the major components but I'm not sure where the 5 ways are. When I went to pick up my boat at MarineMax after a service call for my trim tabs, my whole network was down. They told me there was a blown fuse. I have no idea where the Raymarine fuses are physically located on the boat.
Hi Mike. I am checking with my inside contact at Boston Whaler to find out what documentation is available for their boats and the Raymarine gear installed on them. Could you please shoot me an email to james.mcgowan@raymarine.com so I can share with you whatever i find out?
Hi Robert. We did not make a CAM120, but we do have a CAM220. I think that might be the one you are asking about. There were 3 cameras in that series, CAM200, 210 and 220 and they all had similar power connection options. Those cameras all come equipped with a short power pigtail wire that comes out of the body of the camera, in addition to the Ethernet network cable. That pigtail can be used to tied the camera directly to a 12V DC power source. If you use that connection you'll need to supply the wire necessary to run the length from your power source to the camera's location. It is good practice to make that a switched source (so you can turn the cameras off if you want) and have it either fuse or breaker protected. Some people will connect them to the same circuit as the displays and other electronics so they all come on together. The other way to power those cameras is using Power over Ethernet (PoE.) Using a PoE Injector (part number 4113746) the power can be fed to the camera through the same Ethernet network cable that is used to get the video from the camera to your screens. This kind of installation is especially beneficial for cameras in difficult to wire locations as you only need to pull 1 cable through to the camera location instead of 2, and power can be fed from the bottom of the run. Our Axiom XL series display have 3 Power over Ethernet enabled network ports on the back. No PoE injector is needed there because the Axiom XL generates network power itself. The Axiom, Axiom+ and Axiom Pro series units have only standard RayNet Ethernet ports and do not provide PoE power. Use the injector, or local camera power option with them.
I am about a yr late to ask questions live! I just purchased the Axiom + (E70634-00-NAG) , auto pilot ev100 and the i50 i60 combo package. Would be possible to send me a schematic and what extra plugs wires that are needed that don't come in the box
Hello Jay. Many of the cables you'll need are included, but there will be a few more to get. The key to getting all of these items to communicate will be setting up a SeaTalk NG backbone on your boat. The EV100 autopilot kit comes with a SeaTalk NG cabling kit that will join together everything in the pilot kit. The Depth, Speed and Wind instruments in that kit will each come with a short, 400mm SeaTalk NG network spur cable. Those are generally long enough to go from instrument to instrument, but you might need some longer spur cables depending on where your instruments are installed. The Axiom+ screen will also come with a SeaTalk NG cable, but it as well is fairly short. You will also need to make some additional spur connections in your SeaTalk NG network for your devices to plug into. We make a device called a Seatalk NG 5-way connector that comes in handy for this. It creates a break in the backbone where 3 devices can connect. Please shoot me an email at james.mcgowan@raymarine.com and I can help you build a shopping list for cables and provide some detail on connecting it all together. If you could, think about where on your boat each of these items will be mounted, and how far they are from each other.
Hello Raymarine! In the case of the Seatalkng network, do all connectors in blue need the blue terminal with resistance? A technician here in Brazil said he couldn't put resistance on all blue connectors. I had put a blue resistor on the ITC-5 and the tech removed it.
Hello Marco. There should alwaysbe 2 blue terminators in the network. Never more, never less. The terminators define the ends of the network backbone. The iTC-5 is a bit of an unusual device in that it has a SeaTalk NG 3-way connector built in (2 blue, 1 white.) The white spur connection lets it connect to an existing backbone, or, by using the 2 blue backbone connectors on it, the iTC-5 can be inserted into an existing backbone. It sounds like your network already had 2 terminators in it, and the iTC-5 was connected using a spur cable. In that case no terminators would be needed at the device.
Sorry I missed the live yesterday; busy. Thank you for posting afterwards. Just installed an Axiom + 9” I was glad to take out for the first time. I was impressed to say the least. Yet, obviously there is a need to do some adjustments. Could you show screens in the future of transducer readings that indicate the need for adjustment THEN give an idea what adjustment to make? For example, my screen 3D shows far more fish erroring on the right side with some showing just left of center. So, I am assuming I need to turn the transducer, looking towards the bow, to the left about an inch. That is my guess. I should then get a more balanced fish reading on the left screen. Also I wonder what will happen if I tip the transducer ever so slightly forward. ==== seems you could do a segment on different screen views and what adjustment can be tried to correct the readings and view. THANK YOU.
Can you have more than one Seatalk1-Seatalk ng converter in one ng network? I have a couple of Seatalk 1 devices in the aft of my sail boat and a couple in the chart table area.
Hello Shungo. Yes, you can can more than one in the network. In this case I assume you are building a NMEA2000 or SeaTalk NG backbone running the length of the boat. The SeaTalk to SeaTalk NG converters will be installed in that backbone at your 2 locations. Each converter can host up to 5 SeaTalk devices. The converters and the instruments connected to them will be powered from the SeaTalk NG/NMEA2000 backbone.
@@RaymarineInc Thank you for your explanation. Right now our backbone runs from AIS650 (midship) to C90W(aft). C90W(aft) is SeaTalk1-cabled to ST6002 (aft) with ST60+Wind (aft) which is SeaTalk1-cabled (red, yellow, screen) to the course computer (aft). ST6002 with ST60+Wind is powered from the DC panel via SeaTalk1 (red, screen). The course computer (aft) is SeaTalk1-cabled (yellow and screen) to SeaTalk1 network of ST60+Tridata and autopilot remote (midship). Would the following connections from 2 new converters work? (1 converter each in aft and midship) 1 (aft) : SeaTalk1-ng adaptor cable to ST6002 and ST60+Wind 2 (aft) : ng-spur to the course computer 3 (midship) : SeaTalk1-ng adaptor cable to ST60+Tridata and autopilot remote
I am not quite following what connection #3 is and what it would be plugged into. The ST60+ Tridata and the pilot remote (S100 or SmartController) are both Seatalk 1 devices. If they are going to connect to the STNG backbone they would need to go through a Seatalk 1 to STNG converter. If you want to scribble a quick diagram and email it to me, I'd be happy to take a look. james.mcgowan@raymarine.com
Awesome video - very informative! I'm still curious about if when installing NMEA2000 devices to network with my Axiom Pro 12, do I have to do the SeaTalkng/NMEA2000 conversion or can I go straight with a NMEA2000 backbone, being as the Axiom has a NMEA2000 port? I'm specifically referencing adding a fusion radio.
In that video the MFD has the Dashboard application loaded, and the MFD is setup with the sailing profile. That page is one of the performance sailing pages. The dial-indicator in the middle is a wind angle display.
The Axiom and E120 cannot be plugged into the SeaTalk HS network together. There are too many differences in the software, features, and communications capabilities. They will conflict with each other, creating network alarms.
You may need to check directly with Lugger / Northern Lights to see what data your particular engine is capable of outputting. Many of their diesels use simple analog senders to communicate engine vitals to traditional instrumentation and don't use electronic signaling. I do see an option listed on their website for some of their generator products called WaveNet, that converts analog to digital with NMEA 2000 data. Raymarine's Axiom chartplotters are looking for engine information in standard NMEA 2000 format. There are also 3rd party devices out there that can be fitted to motors with analog instrumentation to create a digital, NMEA 2000 data output. These include devices like the Noland RS-11, Actisense EMU-100, and AlbaCombi analog to NMEA 2000 converter, just to name a few. These do require some knowledge about the engine's systems, identifying the senders, and a fairly extensive setup to get them up and running.
Thanks for these videos and your help on my previous questions. I am transitioning from an E80 Classic/ST60+ installation and upgrading using an Axiom + & Quantum 2. My ultimate plan is to have Axioms at both the navigation station and the helm but I am starting with the just the Axiom at the Nav Station. I am using a STng Converter . Can the connection be made into my Smartpilot rather than by plugging into my ST60+ instruments (which are too far away) and can the short Sea Talk- Sea Talkng cable that comes with the Converter be plugged directly into the Smartpilot or does the connection have to be made via a Sea Talk block?
Hi Ian. Yes, you can plug the ST1 to STNG converter into your autopilot. If you are going to connect it at the course computer you'll end up removing the black, 3-pin SeaTalk-1 rubber connector to expose the 3 leads inside. SeaTalk 1 is color-coded red (power), yellow (SeaTalk data) and silver/black (ground). Match color-for-color to a SeaTalk 1 port on the course computer.
Great video! I am adding an Axion 9+ to my legacy system with SeaTalk1. Can I use the E22158 and pick the Seatalk1 data off the back of the ST60 multi display and then connect to Axiom from there. All the data seems to be present at the repeater. If so, should I power the STng bus separately?? Thanks
Thanks for watching. Yes. The E22158 Seatalk to SeaTalk NG converter acts as a gateway between the older and newer equipment. It will work just fine between your Axiom+9 and ST60 instruments. There are a few different ways to power the converter depending on how you are using it. In your case you are connecting a SeaTalk NG device (Axiom) to an existing Seatalk network. The E22158 will pick up power from the SeaTalk 1 network. The STNG network is not powered separately. Take a look at the installation guide for the converter and your installation is example 4.6 on page 23. You can get the handbook here on the Documents tab: www.raymarine.com/view/index-id=400.html
I have the Evolution autopilot on my 26 foot sailboat. Looking to add the Axiom 9 MFD. Is there a 7-pin adapter to add my existing Hummingbird transducer to the SeaTalkNG? I don't need RV detail of bottom, just depth. Or do I need to buy your transom mount CPT?
Hello Jerry. We can't connect your transducer to the SeaTalk NG network, but, we actually do make a Humminbird transducer adapter cable for Axiom systems, part number A62363. It has the 25-pin Raymarine RealVision 3D connector on one end, and the 7-pin on the other. Normally it is used with Minn Kota trolling motor (sister company to Humminbird) that feature a built-in transducer. Before you buy anything we should take a close look at exactly which Humminbird transducer you have, and the sonar frequencies it supports to make sure it's going to work as hoped. Please open a ticket over at raymarine.custhelp.com with the details of your system. If you have any photos of the transducer, and particularly its plug, that would be tremendously helpful too.
Hello Goncalo. Our Axiom and Axiom+ units do not have a NMEA0183 connection on them any more. They do support SeaTalk NG and NMEA 2000 through the connector that is on the unit's power cable harness. Axiom Pro and Axiom XL models do have NMEA0183 input and output on their power cable. If you need a basic feed of NMEA0183 GPS information to support a VHF radio for digital selective calling we do make a SeaTalk NG to NMEA0183 adapter, part number E70196. It is really only intended to serve a VHF though. If you need more extensive NMEA 0183 data you may need to look at a 3rd party NMEA gateway device from Yacht Devices or ActiSense. These solutions have many more configuration options and support a wider range of sentences and devices.
Hello Erik. I don't quite understand what you are asking about the autoplot. Please feel free to reply here, or email me at james.mcgowan@raymarine.com.
@@RaymarineInc Hello 👋 I have a SPX10 autopilot when I have my Raymarine A9, I use my A9 to control my pilot, after I switched to Axium 9 pro, that are not a possibility, have you make some gear ⚙ to fix it? Great gear ⚙ Raymarine 👍 Erik Hovedskou Denmark
Hi, my name is Jorn, I just bought a BW Realm 350 2019 no joystick with 3 v8 Gerardo 300hp and it has an axiom 12 system . Know I would like to ad an Autopilot. Which one do I have to buy.
Thank you for watching the show. I believe your boat will use one of our traditional hydraulic autopilots, however, I want to check with our Boston Whaler expert. Could you please email me at james.mcgowan@raymarine.com so I can get back to you directly?
Hi Jim! This week I am installing an EV-200 Autopilot Kit to an existing Axiom 12. When I look at the rear of the already installed Axiom, the connections are NMEA2000. No problem, I went to a local Raymarine dealer and bought the adapter cable. I have two questions: 1.) Proving power to the 5-way connector? The kit came with a power supply line with the white spur connection, but the NMEA200 portion already has a large RED power supply going to it. I'm presuming I don't need to add a second power source once I connect the 5-way to the NMEA200 with the adaptor? 2.) Also, I don't have any blanking plugs, so is it okay to leave the unused power supply spur inserted? (with the wires safely taped off) 3.) You mentioned in the video that we should always have two Blue Terminator plugs... but after adding the NMEA2000 adaptor, I only have space for one. At the other end of the NMEA2000 portion appears to be a terminator already. All good? I would add a photo if I could... hope that all makes sense!
Hello Dave. Thanks for watching! 1. There should only be 1 power connection to the entire SeaTalk NG or NMEA2000 network. It sounds like you are expanding an existing network that is already powered? If that is true, there is no need to add an additional network power feed. Power flows through the backbone to all connected devices from the single feed. 2. It is OK to leave a spur cable plugged in, and disconnected at the opposite end. You will want to insulate it to make sure water does not get in there to short anything out. If this is going to be in there for the long-term it would be better to get a proper blanking plug in there at some point. Our part number for extra STNG blanking plugs is A06032. 3. There are ALWAYS 2 terminators in every SeaTalk NG or NMEA2000 network, 1 at each end of the backbone. If you have a combination network with some NMEA2000 cabling, and some NMEA2000 cabling, the terminator at the NMEA2000 end might look slightly different but it performs the same function. The terminators are necessary to define the ends of the network and prevent data corruption. While they look similar to the blanking plugs, terminators do have a small circuit inside with a resistor that the network reads. You can email me at james.mcgowan@raymarine.com if you have more questions, or want to send a picture.
Hello Mark. We don't allow spur cables to be extended in the SeaTalk NG system. There are some restrictions in the network topology with regard to how long a spur can be. Generally, spurs should be no longer than 5-meters, and the overall length of ALL spur connections totaled up should not exceed 30-meters. The longest standard Spur cable we offer is part number A06041, which is 5-meters long. If 5-meters is too short, you should extend the backbone cable to bring it closer to where you need to go. Then use a standard-length spur cable to connect-in your device. Our Seatalk NG Reference Guide has all the rules and restrictions, and offers lots of guidance on building a network. You can download the PDF version here: raymarine.app.box.com/s/2ulwt6ye4394g6yk3m0t/file/23388950831
Only 1 power cable is allowed on the SeaTalk NG or NMEA2000 network. If you have a very large system you'll want to centrally locate the power feed and try to balance the loads that are upstream and downstream of the center. Every device has a Load Equivalency Number (LEN) value assigned that is a score suggesting how much power it needs. You'll want to add up the LEN values of all the items upstream of the power connection, then all of those downstream. Ideally, the LEN values should be the same, or fairly close, indicating that the network power is balanced. Our SeaTalk NG Network Installation Guide (81300-1) goes into great detail on this. It is available for download here: raymarine.app.box.com/s/2ulwt6ye4394g6yk3m0t/folder/1787214721
Hi Jim, I recently outfitted my boat with Garmin equipment. Specifically GPSMAP 943xsv and radar and transducer. I decided to bite the bullet and picked up a FLIR M232. I really like the features that an axiom will provide with that camera. Are there any things that can be shared between the two units? Meaning if I network through nema2k/garmin network/seatalk/ can things be shared?
Hello Spicy. Thanks for choosing M232. It's a great addition to any marine electronics system, even Garmin! Unfortunately the M232 can be linked to both a Garmin and Raymarine camera at the same time. The connection between the camera and the displays is Ethernet, but the networks can't be combined together. It is possible to have both Raymarine and Garmin products on the same NMEA2000 network, but that network is lower bandwidth than the Ethernet networks, and does not carry video.
Hello Benjamin. Element-series chartplotters are only compatible with our Quantum radars. The RD418D is not compatible with Element. Element-series units connect to the radar scanner using Wi-Fi. The RD418D radar does not have a Wi-Fi connection available.
Great info - Love the Axiom - DJI Drone augmented reality capability. I have existing E120W (4), seatalk/seatalk-ng system.new in about 2012. Is it possible to incrementally upgrade - replace one E120W at the helm with an Axiom? i.e can it plug and repeat on the seatalk-ng network? Or could it stand alone with separate GPS/Power -and link to drone?
Hi Paul. Your new Axiom would have to be separate from any E120W units. Though they both have fast Ethernet connections, the Axiom runs a different operating system and communcates differently with other displays and accessories. I would add 1 Axiom stand-alone, and then over time you can add additional ones and link them. They can share SeaTalk NG information though, so your GPS, intruments, active waypoint, route, pilot, etc. can remain connected to both systems. When you start upgrading, do take a look at our adapter kit A80531, which allows an Axiom Pro 12 to fit in the same cutout your E120W displays sit in now. It makes for an easy, clean changeover with no fiberglass work.