RBC Intake Manifold Install- 9th Gen Civic Si

Подписаться 1,2 тыс.

Просмотров 71 тыс.

50% 1

So in this video I cover installing an RBC Intake Manifold onto a 9th Gen (2014 to be exact) Honda Civic Si. This will be the same process for all 9th Gen Si's. Its a pretty simple process.
-remove air box/ cai/ sr intake
-disconnect throttle body and all vaccum and coolant lines
-remove fuel rail
-remove plastic intake manifold
-remove runners
-reinstall rbc along with coolant delete/bypass
-reconnect all vaccum and coolant lines in their correct locations
Thanks all for liking and subscribing. Don't forget to get yourself entered in my 100/150 subscriber giveaway. Leave your comments below! Also don't forget you can ask any question you have considering your application and I will answer it to the best of my ability.
Music: Sunday Service by Ryan Little- / sunday-service

Авто/Мото

Опубликовано:

23 авг 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 238

@marcusmoore5441 6 лет назад

A man not afraid to wear gloves while working,respect!!!

@AaronShirzadi_mar5hal 6 лет назад

That habit died out quickly lol

@alexcanchola3972 7 лет назад

Just bought a 9th gen and your videos are extremely helpful! Just installed Acuity shifter bushings and springs. P.s Lower tie bar

@AaronShirzadi_mar5hal 7 лет назад

Awesome bro I'm glad to hear that! Thank you for the support and noted!

@jesuscontreras2499 3 года назад

Thank you! Finally a video explaining how to install this

@clutch0514 7 лет назад

It’s always nice to see a fellow 9th gen as well as fellow coworker lol. Keep doing your thing man. Btw that lower bar would be interesting lol

@AaronShirzadi_mar5hal 7 лет назад

Haha thanks bro! Att during the day. Working with the car at night lmao.

@slow_joe_fg4134 3 года назад

Watched this when I got my 14 fg4. Watched this a year after my rbc swap. No regrets lol

@Itsdjsigi 7 лет назад

THANK YOU THANK YOU, was looking for a video like this!

@AaronShirzadi_mar5hal 7 лет назад

You're very welcome. Hope it helps!

@acegarong3305 4 года назад

just bought my 9th gen.all video really helpfull

4 года назад

I hope u aint adding the rbc.. pointless mod on the 9th gen unless u building ur motor.

@dimmn82 6 лет назад

i really love that injector cover

@JoseHernandez-fd3li 4 месяца назад

good video where I can get everything I need for the change

@Blackbucketbeto 7 лет назад

Nice video great detail , you could delete the coolant to the throttle body and those vacuum lines 👍👍👍

@joseautomotivemedia 2 года назад

awesome video!

@VXNogs 2 года назад

What injectors did you swap to? Also I have the Skunk2 composite CAI, fill I still be able to have it run down my wheel well area?

@tommyboiixd 4 года назад

This helped me before but I didn’t know about the extra vacuum lines in the back of the Intake manifold

@alfredmatos7859 6 лет назад

Can you use the stock 9th gen feul injectors with the RBC Intake Manifold or do you have to buy new ones?

@daddyyowcedric7687 5 лет назад

did you have hondata or straight bolts on ? cuz I'm planning to buy one but i don't know if i need hondata or just plug and play

@henryherrera9111 7 лет назад

Very helpful thank you

@AaronShirzadi_mar5hal 7 лет назад

You are very welcome my friend. Glad it helped!

@michaelroberts6151 5 лет назад

where do I get the rbc intake kit you installed?

@nickzieres7852 3 года назад

hey so i bought this for my 08 accord and my stock injectors won’t fit... what are u using??? i really need to know to finish my build

@jeannaubert7000 2 года назад

i was looking at the prl website, i see the have the whole kit. if i buy the whole kit, would that work for my whole setup? would i have to be more things, because worries me is the coolant delete part.

@shongxiong2346 5 лет назад

Do you have cranking problem with your rdx injector?

@papo_dc5968 4 года назад

I have a 2004 rsx base. And I want to install a RBC intake manifold. Do I need to have it turned after I install install it

@luismoreno8459 4 года назад

How many inches it’s the filter that you used for the intake ?? Lmk please I need that one!!

@oath1909 3 года назад

I bought a 2012 project si I need help I habe some wire with plugs laying around confused where they need to be plugged in... Can you help pleaee also I dont know how to check the temperature coolent gage on these car cause it doesn't show like older models on honda..

@ratedsuperior8992 3 года назад

Is that a k20 gasket you used for the IM?

@boostconcept_ 5 лет назад

Hi man, great video! I was wondering if you *NEED* a tune, obviously for CAI, headers, and manifold you obviously need a tune but is possible to not require a flash tune? I watched a video before and I've never seen anybody do this method before, he would install the RBC manifold then wait the next morning and cold start the car and hold the rev at 3000rpm to "restart" the car ECU as you have much more air into the engine, after he is done this for a few seconds, he proceeded to turn the car off and happy days. Does this really work?

@boostconcept_ 4 года назад

Would the stock throttle body fit with the RBC

@Lixop1 6 лет назад

Good evening, my friend, I'm going to import this manifold into Brazil. I would like to know the costs of the manifold design, and exactly where you bought .. how much would this kit

@giovannisomajestic3457 2 года назад

Can I still use a 9th gen si intake with RBC with stock thottle body ?

@wolfxdora 3 года назад

Where did you run the pcv hose to?

@mariopic Год назад

where u buy the coolent elbow adapter from

@bobfrankfurt9449 5 лет назад

What's the difference between this manifold and the KTuned Side Feed Intake Manifold? Ktuned is like $1200 dollars...

@WillKillU1212 2 года назад

Where did you buy the “coolant delete “ or where you buy you intake kit plz

@kingazhar1212 Год назад

Nice work mate . I got a question?!! Pls About the water adapter can't we use the original way that is available on the manifold itself ??

@ratedsuperior8992 3 года назад

How long did you let the Honda bond cure ?

@ghostofsparta87 3 года назад

How do search for this manifold? I have a 2012 civic si.

@rafiq-oj1ee 3 года назад

Hi rdx injectors are 8gen and 9gen same ?

@promatic3871 2 года назад

Plug n play? No need to calibrate the stock ECU?

@norbertomontano187 6 лет назад

Would that skunk 2 throttle body adapter work on my 2012 si? I’m also doing an rbc swap

@AaronShirzadi_mar5hal 6 лет назад

I haven’t personally looked into the s2 adapter but if it serves the same purpose and matches up with the rbc then I would say yes but don’t quote me lmao.

@you-nh8xo 5 лет назад

What injectors did you buy?

@jakeyfpv 6 лет назад

Hey bro that breather vent by you battery and clutch bushing thing on the top of the transmission at 10:13 . I noticed it doesn’t have the cover lost mine the other day . How long has yours been like that and is it okay to run the car without it

@AaronShirzadi_mar5hal 6 лет назад

Honestly I didn’t even notice that and you may have just helped me solve my leaky transmission problem!

@ANTHONYNI33 6 лет назад

Sorry one more question what injectors did you use that went right In with the stock fuel rail and into the rbc with no problem?

@AaronShirzadi_mar5hal 6 лет назад

No worries. I used rdx injectors (410cc) with plug and play clips.

@MGOD92 4 года назад

Where you get the gasket from

@jonathanbonilla2555 4 года назад

Brot u porting the hole where the injectors enter?

@derekdietz799 3 года назад

You need a tune for this correct?

@NapoleonDynamite69 6 лет назад

Just askin new to ur channel do you put maintanance fluids in the car? If so which ones? Im picking up an 8th gen gonna put some headers intake maybe exhaust so new to this hows ur intake going lol

@AaronShirzadi_mar5hal 6 лет назад

Welcome to the channel and if you’re buying the car I’d recommend doing a fluid change (coolant, manual transmission fluid, oil, bleed the clutch and brakes). My intake is still holding up as it is lol. It’s as “custom” as it can be haha

@mrslapside 5 месяцев назад

Clean bro how she holding up today

@wuilmermendoza436 4 года назад

You didn't use the prl adapter ?

@demisson401 3 года назад

Did you reuse the stock TB??

@e_yiizy 5 лет назад

Love your vids. Not enough love for the 9th gen. Do the fuel injectors have a maintenance interval of when to change?

@AaronShirzadi_mar5hal 5 лет назад

Thanks bro. And nah not really. You can get them flow tested and such but when you swap out the stock injectors to the Rdx injectors you should be gucci.

@zurkathonyscott9618 5 лет назад

Can you use a cut rbc?

@michaeljames1290 3 месяца назад

Did you get it tuned?

@Mattedmz 6 лет назад

What kind of injectors would I need if I don't plan on widening the bores?

@AaronShirzadi_mar5hal 6 лет назад

Depends ultimately on your tune I guess. But I used rdx injectors. Pretty sure they’re 410 or something like that. I’d go with those. You can splice you’re old connectors or they sell a quick connect adapter.

@zackerymcpherson9409 4 года назад

What other mods do you have on your car that compliment the new IM? I’ve read that CAI, Catted DP, exhaust, RBC IM, Hondata flash pro + TUNE can get 200 WHP. What experiences have you had with these mods?

@jeffgirard8958 4 года назад

I'm up to 210whp without the RBC. I'm wondering what I would gain from this.

@stefany140 6 лет назад

Nice vid. Question, how did you get your valve cover and plastic cover over manifold painted like a galaxy

@AaronShirzadi_mar5hal 6 лет назад

The plastic cover over the manifold comes off by simply in screwing the two 10mm bolts that hold it down. The valve cover is a little more in depth but you can watch my other video for reference. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7v7PAWgdAmQ.html. And after that you need to either hydro dip it yourself or send it to someone that hydro dips them. Contact streetlocity@gmail.com and they can point you in the right direction 🤙🏽

@moneyman89065 6 лет назад

Did you do any cleaning to the head surface of where the intake manifold goes?

@AaronShirzadi_mar5hal 6 лет назад

I carefully wiped it down with a rag and scraped away any debris that built up yes but since that’s normally sealed from the factory there isn’t much to clean on the actual mounting surface. But it’s always a good idea to clean and prep anything you can 👍🏽

@johnjacobs9187 Год назад

Did you have to get a tune after the install?

@Brian-iz9sh 5 лет назад

Nice video! I have myself a 13 civic sedan. What is the benefit of installing this mod? Also if you have any of those giveaways left here’s my comment :)

@nickolasmayberry3189 3 месяца назад

Where can I get this manifold

@KingAceDot 3 года назад

What spacer is that ??

@Lucky_Logan 5 лет назад

Are those stock pressure injectors? Just replacements since that OEM one was bad? Did this come as a conversion kit or did you have to piece it together?

@AaronShirzadi_mar5hal 5 лет назад

They are the rdx injectors. I believe 410cc

@JoseReyes-kf1dj 5 лет назад

I got a question My civic si 2012 has the stock manifold And it’s like plastic What do u think if I change it for the Acura txs aluminium manifold It’s better or the same shit

@AaronShirzadi_mar5hal 5 лет назад

Not sure if it works the same as the rbc.

@bigchubyman 5 лет назад

Hey bro this videos great ! Question tho after you installed everything did you have to run a tune to use that Rbc intake manifold oh and the coolant that accidentally spilled a little bit did you just add to the resivior ?

@Mr.Z125 4 года назад

Yes a tune is required.

@AaronShirzadi_mar5hal 4 года назад

Yeah definitely want a tune. And a little bit escaping isn’t that big of a deal but I always burp the system after disconnecting any coolant lines.

@Turbo_tonyy 6 лет назад

Is their any other way you could connect the throttle body harness with out cutting anything ?

@AaronShirzadi_mar5hal 6 лет назад

Unless you take apart the loom it’ll be difficult to get it to reach. I just sent it 🤙🏽

@escondidonative2903 6 лет назад

Are u vit tuned? Love my swap but had prl bore my injector holes out to fit the 9th gen injectors and match the Zdx tb. How u liking it?

@AaronShirzadi_mar5hal 6 лет назад

I'm running a tune but not from vit. I love the up top. Really opens up the 9th gen. I have missed the lower end torque though but I've heard mixed things. All comes down to the tune. But so far I can't say I don't like it lol

@escondidonative2903 6 лет назад

Cool man. Vit really has the rbc figured. I'd give it a try. Not plugging his thread at all it's just I couldn't be happier. Torque loss isn't as bad as people say.

@AaronShirzadi_mar5hal 6 лет назад

Good to know man. I'll definitely give it a go 🤙🏽

@abeperezjr53 5 лет назад

Did u use stock throttle body

@vicentel603 6 лет назад

8th Gen Society 🤘

@AaronShirzadi_mar5hal 6 лет назад

And again, I’m an SiClub member myself but all civic love is welcome! 🤙🏽

@Lkom24 6 лет назад

I just ordered my rbc kit, currently tuning with vit, should have waited but hoping he will let me change. the coolant delete was included in the prl adapter kit correct? If not which brand did you use? Been using your videos alot lately. Thanks!

@AaronShirzadi_mar5hal 6 лет назад

Thanks for the support bro! And I bought the setup from my friend. I believe the coolant delete is separate from the tb adapter but prl may have a kit that offers both. 🤙🏽🤙🏽🤙🏽

@Lkom24 6 лет назад

Aaron Shirzadi did you use k tuned delete? No problem, your videos help me save $, least i can do.

@Lkom24 6 лет назад

Aaron Shirzadi also what did you edyno with this setup, same as me except i have full race full exhaust, you had q300 and rv6 correct?

@2legit4you68 5 лет назад

Hello, could you post the link of where you got everything please? Thanks :)

@AaronShirzadi_mar5hal 5 лет назад

I bought things from my friend and online. Just gotta look around 👌🏽

@chibisparta6723 2 года назад

You didn’t have to drain your coolant?

@dimitrusvalentin6280 7 лет назад

i have a8thgen coupe i was told getting a skunk 2 intake manifold isnt worth it what are your options? i would like a shift knob

@AaronShirzadi_mar5hal 7 лет назад

I personally haven't used the skunk2 mani although the idea is extremely similar to the rbc. I feel that the mods are only as good as the tune on the car. That's the key factor with any bolt on imo. And noted 🤙🏽

@qua_szn Год назад

Whats throttle body bro ? And spacer ?

@Lixop1 6 лет назад

Good evening, my friend, I'm new to this preparation world. I want to make my car with the RBC or Skunk2 manifold. Where can I find it full? thank you

@AaronShirzadi_mar5hal 6 лет назад

You can check the prl website or procivic or kseries pros.

@Drek450 6 лет назад

soo what did you have to do with the coolant bypass ? i bought the tractuff & im kind of lost with the two holes

@AaronShirzadi_mar5hal 6 лет назад

The coolant bypass blocks the coolant port on the block and routes it back without passing through the manifold.

@jerrymeas8182 6 лет назад

Question, I’m doing the rbc but I’m not sure where to connect the vacuum hole on the rbc that’s located on the passenger side. Where did you connect that to?

@AaronShirzadi_mar5hal 6 лет назад

Pretty sure I connected that to the pcv that’s right below it

@jerrymeas8182 6 лет назад

Aaron Shirzadi I see cause I’m reading online and they made a T tube . Just wondering if you did the same

@AaronShirzadi_mar5hal 6 лет назад

Yeah you can do a t tube to a catch can if you want. I’m going to do one that goes from the pcv line to a catch can back up to the breather on the valve cover

@Zuudoh Год назад

I'm curious, why is there a coolant delete on the intake? is there a benefit to it?

@AaronShirzadi_mar5hal Год назад

I believe it was to help reduce some of the heat soak to the air going into the engine. The cooler the air the better.

@completeautomotive-detaila5445 6 лет назад

where did you get that streetlocity sticker for the motor cover?

@AaronShirzadi_mar5hal 6 лет назад

It was custom made by streetlocity. One of a kind

@awwwyeea 6 лет назад

Hey bro I have another question I have the sk2 pro series idk how different it is from the rbc but what did u do with the pcv hose it doesn't have anywhere to connect now and also the small hose right above your knuckle around 8:09 - 8:13 idk what to do with them thanks

@AaronShirzadi_mar5hal 6 лет назад

In the rbc it has a bung for the pcv but like my kraftwerks manifold it doesn’t. Right now I don’t have it connected to anything but I am going to run it to a catch can. And the small vacuum that’s near my knuckle I have connected to a line on my prl tb adapter

@awwwyeea 6 лет назад

Aaron Shirzadi interesting and the prl tb adapter sort of works like a tb spacer ? Or what's the purpose of it I'm thinking about getting it

@AaronShirzadi_mar5hal 6 лет назад

Yeah the adapter is basically a spacer. Makes the 9thgen tb work with the rbc. I have it on my kw setup just as a spacer.

@hgallegos817 6 лет назад

Do you have to change injectors wen you go to the rbc?

@AaronShirzadi_mar5hal 6 лет назад

I did yes. Do you have to? Not entirely sure the 9th gen injectors would fit the rbc or not but I believe everyone that goes rbc gets rdx injectors.

@FCT8306onTwoWheels 6 лет назад

Awesome video my dude. Got a question, K24z3 will this rbc fit? Ktuned rbc is nice

@AaronShirzadi_mar5hal 6 лет назад

That’s the one in the tsx right? If so I believe it should bolt right up. Haven’t worked on one of those though so don’t quote me haha

@NobodyLikesyou. 6 лет назад

That’s an Accord dude .

@jean-philippedion9095 7 лет назад

Where did you get your adapter kit? The only one I see on PRL's website is an adapter plate with a round hole to cover the "peanut" shaped coolant hole of the RBC manifold. Yours is like another differernt piece. Very nice video by the way, i like your installs. I subbed a couple videos back

@AaronShirzadi_mar5hal 7 лет назад

Hey man thanks for the support! As for the swap, I bought the kit from a friend and it had everything included. The one I'm using is the prl bypass/ delete and I know I've seen them around on a few sites. Can't find one at the moment but if you're looking for something similar there's one on kseries pros site made by ktuned. kseriespros.com/k-tuned-intake-manifold-coolant-bypass-k24z7/ I can look around and link a prl as soon as I find one

@jean-philippedion9095 7 лет назад

Cool thanks man! Can you tell me what line you ran to that throttle body spacer?

@AaronShirzadi_mar5hal 7 лет назад

That's a vacuum line that I believe isn't doing anything anyway so I'll probably just delete it.

@Turbo_tonyy 6 лет назад

Hey bro quick question how did you extend you’re throttle body harness??

@AaronShirzadi_mar5hal 6 лет назад

I honestly snipped it and extended it with some 18 gauge wire. Soldered everything up and no problems as of yet. It’s better to crimp since the engine bay has a lot of heat in it but soldering did just fine for me. Just match the wires up by color and add what you need 🤙🏽

@Turbo_tonyy 6 лет назад

Alright man thank you!

@Gregg0112 5 лет назад

That engine bay looks neglected

@AaronShirzadi_mar5hal 5 лет назад

It definitely is 🤦🏻‍♂️

@wilcerlora623 4 года назад

How did you extend the throttle body harness?

@AaronShirzadi_mar5hal 4 года назад

Just clipped the wires and soldered in extensions. Just leave yourself some room. Don’t cut to close to the connector.

@andymagana1706 4 года назад

Is it necessary to do the coolant delete to install rbc or you dont have to?

@AaronShirzadi_mar5hal 4 года назад

No it isn’t necessary. This manifold that I bought just happened to be pre cut with the coolant bypass. I think you need a specific gasket though due to the difference in the size/shape of the passages

@F0BBYLEE 4 года назад

Does it actually make any kinda of gain? Is it true that you end up losing a lot of low end torque?

@carlos019921 4 года назад

Abe Linkin yes you do!

@Mik3Mcflyy 6 лет назад

Haha you work for Att brotha? I do as well! I manage one in PA. Tune it and you will see huge top end power but lose mid range.

@AaronShirzadi_mar5hal 6 лет назад

Actually I don’t work for att anymore after 6 years of managing lol. I’m actually working on cars now 🤙🏽 and I had a tune. But I’m boosted now so that rbc long gone

@ABrianLewisVlog 7 лет назад

How does it run man? I've heard anywhere from 30-40 hp gain off this swap with tune. And great video as always bro!!

@AaronShirzadi_mar5hal 7 лет назад

It's definitely a noticeable difference and thanks bro!

@Buggabones 7 лет назад

You get anywhere around 15-20whp in vtec but lose some low end tq.

@AaronShirzadi_mar5hal 7 лет назад

Yeah it's definitely noticeable down low the loss of torque. At least the tune I'm running

@TheCd5apple 6 лет назад

What's the increase bro I'm thinking about doing this

@moneymikegsr 6 лет назад

lol, you will not see anywhere close to a 20-30 HP gain unless you are putting up big boost. as far as NA you lose most bottom end but at around 7k rpm ( at redline) it makes 4 1/2 - 7 HP. so basically if are going to only want top end it is a good swap with cutting torque at low end. but it does give it that kool sound.

@T00kCityTv 4 года назад

How did u extend the throttle body harness ? Cut and rewire ?

@AaronShirzadi_mar5hal 4 года назад

Exactly

@T00kCityTv 4 года назад

Aaron Shirzadi what gauge wire ?

@nexerwerks9302 4 года назад

So no adapter plate is needed? Because I have a cut rbc already like yours and everyone is telling me I need to buy the prl kit but if I can just get away with the coolant bypass plate you have I’d do that just need to know if it’s even possible without the prl adapter plate.

@AaronShirzadi_mar5hal 4 года назад

If your manifold is cut then you should be fine with just the coolant bypass plate.

@nexerwerks9302 4 года назад

Aaron Shirzadi thank you So much

@Mattedmz 6 лет назад

How much does RBC cost, and what would I need to make it a good set up??

@AaronShirzadi_mar5hal 6 лет назад

It depends where you get everything from and if you get it cut like mine was. It can range for the complete setup anywhere from $450 (what I sold mine for) to $700+. Also if you aren’t doing the installation yourself you’d want to take that cost into consideration as well. Plus to make it worth your while you would want to have the car tuned so there is that cost too lol.

@Mattedmz 6 лет назад

Aaron Shirzadi Thx for quick response.. I seen some places where they cost $140 for k24z manifold kit. I just wasn't sure whether that's all you needed to make some gains or add injectors along with it or something! I'm already tuned n have a flashpro so I don't really need to worry about that, just wanna get a re-tune with an RBC now n get best possible results!

@AaronShirzadi_mar5hal 6 лет назад

Yeah whatever tune you have now will need to be changed to compensate for the rbc. And yeah my setup was the intake manifold with the coolant delete, the prl coolant bypass and Rdx injectors.

@AaronShirzadi_mar5hal 6 лет назад

Yes most people run the rdx injectors so they don’t have to bore out the stock injectors because most tunes with the rbc on the 9thgen require more fuel

@ItsMatrixTime 6 лет назад

I know in the video u showed what u bought to install it but can you write it out so I can know. Thank you

@AaronShirzadi_mar5hal 6 лет назад

What I had for this was as follows: - cut rbc intake manifold - prl coolant bypass - hondata thermal intake manifold gasket - prl throttle body spacer/ adapter - hondabond (not hondabond4) - honda/acura coolant That’s all I can think of atm. If I think of anything else I used I’ll be sure to update the post 🤙🏽

@rickxs619 2 года назад

did you have to reprogram the ECU ??? or do anything

@AaronShirzadi_mar5hal 2 года назад

Yes a re flash is definitely needed.

@ANTHONYNI33 6 лет назад

Where did you get the rdx injectors I see it came with harness adapter as well?

@ANTHONYNI33 6 лет назад

Also I did the rbc swap and my car is rough idling now 1k to 2 k rpms would you know why ?

@AaronShirzadi_mar5hal 6 лет назад

I bought the kit from my buddy who had everything brand new. And are all your vacuum lines secure? Make sure there’s no vacuum leaks. Also make sure your tb adapter plate is seated properly. What tune/ basemap are you running with it?

@ANTHONYNI33 6 лет назад

Aaron Shirzadi thanks for the reply bud it seems the j35 Tb I had made the car rough idle I switch back to stock Tb and now the car is ok it’s yosolo tuned and running strong I also just noticed the stock Tb and j35 Tb are the same size lol🤦🏻‍♂️

@MistaIntake 3 года назад

Do you have to extend the throttle body sensor or there enough slack to reach

@AaronShirzadi_mar5hal 3 года назад

If you open up the harness I’ve heard there is enough slack but I just extended mine by cutting and adding wire and soldering it in.

@MistaIntake 3 года назад

@@AaronShirzadi_mar5hal sweet thank you so much, video was very helpful.

@bradperez3649 5 лет назад

do you have any kind of tuning software? intake.... injectors and CAI all need to be calibrated into your computer.

@AaronShirzadi_mar5hal 5 лет назад

They’d probably help right?

@bradperez3649 5 лет назад

@@AaronShirzadi_mar5hal you cant just throw on intake and injectors and hope for more horse power... you have to tune the computer and tell it what to do. you actually losing horsepower and gas mileage

@johnmartinez6005 6 лет назад

How long did it take you to swap it out

@AaronShirzadi_mar5hal 6 лет назад

It depends on your tools and experience in the matter. If you’ve never worked on your car or any car for that matter this can be an all day/several day process but if you’re somewhat familiar with the setup you can have it done in just a few hours. Maybe even less. It took me about 3 hours since I rounded off a nut on one of the studs and had to run out and buy and extractor kit.

@ANTHONYNI33 6 лет назад

Nice video bro . I’m just a little confused how you needed the coolant delete but for the prl kit a coolant delete is not necessary how is that possibles please lmk I’m very confused

@AaronShirzadi_mar5hal 6 лет назад

With the rbc being cut the coolant bypass or delete is necessary and in doing so you help reduce heat soak. Hope that helps 👍🏽

@ANTHONYNI33 6 лет назад

Aaron Shirzadi yesss that completely answered my question thanks a lot i knew I noticed your rbc was a lil different on that side thanks a lot.

@ANTHONYNI33 6 лет назад

Also how did you solve your caí problem did you just have to roll with it short like that

@AaronShirzadi_mar5hal 6 лет назад

Yeah right now it’s still a cold air/short ram intake lol. Luckily I was able to make do with parts that I had lying around. I know there’s an adapter you can buy that will make the 9th gen skunk2 Cai fit better. Could also just get a coupler and make it work 🤙🏽

@ANTHONYNI33 6 лет назад

Aaron Shirzadi nice thanks for the tip now I’m prepared for an rbc lol

@JoseMedina-ng7sh 6 лет назад

Hey nice video.. I just bought the rbc intake manifold I’m guessing I have to have the coolent delete done when I do rbc intake manifold? And do you recommend any gasket for it?

@AaronShirzadi_mar5hal 6 лет назад

Technically you don’t need to do the coolant delete but most people do. As far as gaskets you want to get the hondata thermal manifold gasket that fits your application. I had to trim the one I had a little to get it to fit up with my setup but it worked none the less 🤙🏽

@JoseMedina-ng7sh 6 лет назад

Aaron Shirzadi thank you for your reply I appreciate it !