RBEH HOLDEN BUILD | Folding the floor with a pan break folder 

He is soooo cute… still a little boy eh..

Thanks Kieran

Thanks Dean

Thank you! Cheers!

Much appreciated

I've spent many many hours on a panbrake folder when building limos

@@ProShop1 today I welded up the love bar holes 🕳️ and Torno cover pinholes in my quarter panel one ☝️ side on my 96 xh falcon ute I worked out how to remove the inner support brace panel it had one spot weld in the middle of the three holes for the XD plastic Torno things and I gently removed it from inside the quarter with a panel hammer and sharp paint scraper to separate the glue between the holes anyway I used a one KG copper block held behind the holes and slowly mig welding them up and cooling each weld with air as I filled in the holes I was surprised I got no buckle minimal I worked out because the love bar holes were stretched from people tying rope on em I shaped around them or shrink them on the round side of a toe dolly by hitting in the middle with dolly pushing out on the lows and tapping highs in we’re the bolts we’re holding the bar on like a massage and not stretching the metal with the hammer by hitting the dolly on the high if you know what I mean was fun 🤩 on the old falcon

Easier way of saying it was I tapped the highs into the lows with a toe dolly slight round face hammer . middle of the love bar holes were stretched and around the hole were the washer on the bar was low on top and bottom of the holes from bar being used for a tie off and people leaning on them in a downward direction

Thanks Bill

Cheers

Thanks 👍

Thanks. Once it has folded past a certain degree it really can't be unfolded.

Thanks Paul. An open day would be a great idea. Eventually I would like to be running fabrication classes.

He sure is. I’m trying to get one out every two weeks