RC-2 Powder Coat System Release & Demo 

Ordered the RC-2 and shipping was fast! Thank you. Very well put together. I will put it through its paces.

Buying the RC1 was one of the best choices I made and have been loving everytime I get to use it! RC2 is on my radar for an upgrade in the future! Thank you for taking the time and effort to making these great tools available! No one else is offering these quality guns at this price! It was either suffer with the eastwood starter or save $5k haha The hero we needed!

Just an FYI, while adding an 8' ground rod may be a good idea for powder coating, it must (should)be done to NEC code in the USA. Long story short, according to code all grounding rods should be at the same location or be tied together. In other words if your powder coating booth and system are at the South end of a 100' long building and the electrical service panel and building ground is at the North end? the ground rod you added needs to be attached to the main building ground at the other end. If you drive a rod in the yard, parking lot or even the concrete slab on your shop floor for your booth then 120' of copper wire needs to installed outside so the ground potential is equal at both rod locations. I'm not an electrician and I didn't sleep at a Holiday Express last night either Lol. What I do know is that after taking 3 days to fix a crazy electrical problem myself, I had to get a real electrician in to figure out why we would randomly lose half of our outlets and were also getting shocked whenever someone would wash their hands while the floor was wet underneath! Very dangerous and someones poor grounding choice involving a radio tower. All from an "extra" grounding rod that was tied to some water pipes that were connected to another ground and also tying the ground and neutral blocks together in a sub panel or something like that? Bottom line? Unless you want a perm or picture in the newspaper please make sure you do it correctly.

You speak smoother now in yiur videos ..happy for you man👍

Just ordered the RC-2 system can’t wait to get into powder coating. I picked this set up over all others hopefully I made a good choice. I look forward to learning and growing with the channel

Loving mine!!

Game changer 💪🏻

Just purchased an rc2! Super exited hope the wait to the uk isn’t super long. Can you please make a video on how to adjust kv and amps according to what your spraying

When you did the pink and blue was it done all before baking or one color at a time sprayed and baked

Does putting the bolt through the valve block the powder from getting behind it

Hey! Really like your vids! I recently bought a RC-2 and the results are amazing! Thank you for the shipping!! I just have one question: What do you use for part prep? Do you wipe parts with acetone(or smh. else) or just blow it off after blasting? Hope you can help me :)

Want to see the bike frame final put together

Going to order soon. Thanks for the video. Can I email you on how to use the micro amps? Coming from the rc1.

how soon are they shipping out i placed my order and super excited to try it out

Dude I love your videos and your work where are you located?

What clear coar are you using that has all that silver sparkle??? It looks fantastic!

That frames colors remind me of maimi subs logo. How do you cut the tape you used on frame, a sharp circle attachment of some sort?

Where the hook is at hanging the springs toward the end, will it leave a mark on the spring?

When u shot this video clips of using the new RC2. This is all without any of the upgrades? Just how it comes when u purchase it off tour site? I really like this gun, an am very intrested in purchasing one. Is the electrostatic triggered by the actual trigger on the gun its self or... did i jus over look the foot pedal or button? Lol. Also is this 110 or 220?

What was the first gun you used. It was yellow. but tip looks different than mine ! I have your first gun. Might have to get this new one. ....Thanks for Video..

What settings are you using I just got mine today so I’m just curious and psi

Will there be any sales soon? Looking to pick up an RC-2 ASAP.

What are you using to block and stuff the holes

Do you ever spray parts hot or only at room temp? Like if you were doing a base and a clear top?

bro which skast blast model you own to sand blast motorcycle frames?

No matter what I tried with the rc1 I couldn't get it to do a 2nd coat properly. The rc2 will do 3 and 4 coats efficiently so far.

What’s the difference in the grey gun and the orange one?

What compressor do you use?

I would love to know where to buy one of those guns that you are using to powder coat powder coat

Hi im interested in purchasing the RC 2 I'm based in South Africa Johannesburg I'd to know how will it take for it to arrive at my door

What kind of gun you use to get your surface temperature

Do you still need a compressor set up for this?

Will they send you a color list

is kv and micro amps adjustable?

You were using 2 different guns. Which one was the rc2?

Can you do an long block (engine )???

What color is that at 32:51? Chartreuse? Who’s it through?

how much does it cost

Do you have a Supplier in Aus at all?

What was the issue at 5:55?

Dang looks like I'm late to the sale party

Not being mean…. But when you say aaaaummmm every other word it makes it impossible to watch. Go back and count how many times you say it.

Supposed to be 4 ml thick that means spray each spot 4 times