Тёмный
No video :(

RC Drift Magnetic Body Mount Install Guide | Scale Reflex Gorilla Mounts 

Sean Lewis Media
Подписаться 5 тыс.
Просмотров 13 тыс.
50% 1

Today I bring you a full guide to install RC Drift Stealth Mounts and Magnets! Its a long video but should explain and give you all the necessary information needed to have a flawless install. This could also be considered part two of my YD-2Z RTR Upgrades series on my channel. Thank you for watching!
Link to Mounting Kit: www.avantlink.com/click.php?t...
Subscribe for more!
I used a set of Scale Reflex Gorilla mounts, and an extra set of magnets to insure a clean install. Youll also need some 3M Extreme mounting tape, duck or gaff tape, as well as a pen to mark the body.
0:30 Parts Needed
4:30 Magnet Install
5:16 Setting Magnet
Want an RC Drift Car? Check out these links!
Best Beginner RTR Drift Car : www.avantlink.com/click.php?t...
Kits you can Build Yourself!
My Favorite Beginners Kit: www.avantlink.com/click.php?t...
Best Mid Range Kit: www.avantlink.com/click.php?t...
Best Pro Kit to Build: www.avantlink.com/click.php?t...
Electronics I Currently Use!
ESC I Use: www.avantlink.com/click.php?t...
Motor: www.avantlink.com/click.php?t...
My Radio: www.avantlink.com/click.php?t...
My Next Servo: www.avantlink.com/click.php?t...
My Favorite Gyro: www.avantlink.com/click.php?t...
Great Choice for Batteries: www.avantlink.com/click.php?t...
My Favorite Tools!
Mip Wrenches: www.avantlink.com/click.php?t...
Turnbuckle Wrench: www.avantlink.com/click.php?t...
Shock Shaft Pliers (Super Useful): www.avantlink.com/click.php?t...
*These are Affiliate Links that help support the Channel at no cost to you! Thanks for watching!

Опубликовано:

 

17 фев 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 55   
@michaelbarnes1146
@michaelbarnes1146 Год назад
This is so sick! I can’t wait to see it in person!
@withlinbarhm760
@withlinbarhm760 7 месяцев назад
Thank you man! I was nervous about how I was gonna mount the magnets on my body. You did it the best.
@SeanLewisMedia
@SeanLewisMedia 7 месяцев назад
Glad I could help! Have fun drifting!
@tarac7990
@tarac7990 Год назад
This was so dope watching you build it!!! I enjoyed your techniques as it was super helpful and informative! Thank you for showing us the process and I look forward to seeing you race this bad boiii!!!
@SeanLewisMedia
@SeanLewisMedia 7 месяцев назад
Your very welcome! I’m glad I can help! A lot of this stuff is so new and different it can be hard to find the right info.
@Pixel_Heart
@Pixel_Heart Год назад
This video was so cool! I learned so much watching this RC Drifting looks super fun!!! Thank you for taking the time to make this❤️
@SeanLewisMedia
@SeanLewisMedia Год назад
Glad you enjoyed it!
@whophukenfarted
@whophukenfarted 10 месяцев назад
Awesome! That thing is just strait up classy!🔥🔥🔥🔥🔥🔥
@SeanLewisMedia
@SeanLewisMedia 10 месяцев назад
I appreciate it!
@CPB24421
@CPB24421 7 месяцев назад
Brilliant, this is exactly what I was looking for! Thank you.
@SeanLewisMedia
@SeanLewisMedia 7 месяцев назад
You’re very welcome! I made this video because I had such a hard time finding info when I went to install my body. I’m glad I can help!
@whophukenfarted
@whophukenfarted 10 месяцев назад
Mines coming tomorrow!!! Sooooo hyped can’t wait to see what my car looks like with the body all dialed on it! 👏👏👏👏👏
@whophukenfarted
@whophukenfarted 10 месяцев назад
Dammit I forgot the second set of magnets 😂😂😂
@SeanLewisMedia
@SeanLewisMedia 10 месяцев назад
Oh no haha! You could for sure do it without but its a little harder haha
@alexnorthcutt3929
@alexnorthcutt3929 Год назад
Great video, thank you! I was worried about trying to figure out where to attach the magents inside but the magnets on the outside holding them in place while you trace them is brilliant
@SeanLewisMedia
@SeanLewisMedia Год назад
I’m glad I was able to help! I had seen a short video that kinda explained it but really wanted to make my own version of the whole process. Have a good one!
@wolfenher6937
@wolfenher6937 Год назад
My dude. I want to say thank you for making this video on how to setup magnet body posts for rc bodies. I’ve always wanted to use magnet body posts for a long time but I never how to use them. Now since I watched your video, I’ll be buying some magnet body posts for my YD2 now.
@SeanLewisMedia
@SeanLewisMedia Год назад
I’m really glad I could help! Thanks for watching!
@akaduy255
@akaduy255 Год назад
Thanks for your help! Luckily I had the spacers I needed for the rear. I had to use shoe glue instead of tape.
@SeanLewisMedia
@SeanLewisMedia Год назад
Im glad it worked out! Shoe goo seems like it would work great. Thanks for watching!
@Valadur83
@Valadur83 2 месяца назад
Really helpful. Thanks from Germany!
@SeanLewisMedia
@SeanLewisMedia 2 месяца назад
Glad it was helpful! Thanks for watching!
@StonerGamingParadise
@StonerGamingParadise 11 месяцев назад
For that price it should come with the 3m tape.
@SeanLewisMedia
@SeanLewisMedia 11 месяцев назад
Your not wrong haha
@deniselewis2724
@deniselewis2724 Год назад
Let me know when you take her out - I wanna check it out in person!
@SeanLewisMedia
@SeanLewisMedia Год назад
I will!
@rpcclo
@rpcclo Год назад
informative video - thank you. Can these magnets hold for on-road racing?
@SeanLewisMedia
@SeanLewisMedia Год назад
The body would likely get pulled off for onroad racing. Velcro would be my personal choice for racing. With the magnet it is pretty common to bump a wall and have your body dragging half way behind you lol
@tittentei7331
@tittentei7331 7 месяцев назад
Hey. Can i use little power when i gonna lose my esc on my mst rmx 2.0? Its sit so fast. But i need to move the esc 2mm to the side to use short battery:). Nice video.
@SeanLewisMedia
@SeanLewisMedia 6 месяцев назад
Thank you!
@jayvenwoodward4491
@jayvenwoodward4491 9 месяцев назад
Anyone run into an issue where the bullet magnets for the front won’t go onto the post? Or dotes anyone know what posts they will fit over?
@SeanLewisMedia
@SeanLewisMedia 9 месяцев назад
The magnets may be different polarity and could be throwing it off. As long as they are lined up correctly they should work, but the magnets being backwards could be a problem.
@jayvenwoodward4491
@jayvenwoodward4491 9 месяцев назад
It’s the bullet magnets that go over the front body mount posts it seems as if my body posts are wider then then bottom of the magnets and won’t fit into the magnets
@SeanLewisMedia
@SeanLewisMedia 9 месяцев назад
@@jayvenwoodward4491 Ok i totally understand what your saying. Are you running an MST, if so the body post are likely to big like you said. You may need to order and use yokomo ones, or shave the ones you have down so they work for you.
@homedude832
@homedude832 3 месяца назад
@@jayvenwoodward4491if you got the mst rmx they Gave you an extra thinner set to add to those thick ones you can cut down Ann’s adjust
@Rider46-69
@Rider46-69 5 месяцев назад
2:50 the metal caps with the set screws aren’t even close to fitting on the front posts of my MST2.5, the posts are way too thick to go in. Do I need a different diameter of front posts? Brand new to rc 😂
@SeanLewisMedia
@SeanLewisMedia 5 месяцев назад
So the mst post are too big, I think you need to use yokomo post. I got lucky I started with yokomo but I forgot that my friend had the same issue. Dont worry its all a mystery when your starting! It will make sense more and more. There will always be mystery curve balls though🤣
@striker09dx
@striker09dx Год назад
Do the 3m tape last? Im always skeptic of the double sided tape power.
@SeanLewisMedia
@SeanLewisMedia Год назад
I’ve heard it does and It’s been holding really well on my car so far. I’ll try to do an update in a month or two. Thanks for watching!
@tittentei7331
@tittentei7331 7 месяцев назад
2.58. Can i cut mine? They are to long if i gonna use magnetic
@SeanLewisMedia
@SeanLewisMedia 7 месяцев назад
Yes forsure! Just do a small amount at a time to be safe.
@tittentei7331
@tittentei7331 7 месяцев назад
@@SeanLewisMedia Thank you very much!
@txgrs
@txgrs 6 месяцев назад
how can I do it without extra set of magnets?
@SeanLewisMedia
@SeanLewisMedia 6 месяцев назад
It’s a little bit harder but you can still use some masking tape on top. Put a big piece around the area, set it on the body and get it lined up, use a light to shine underneath and then draw the circle on the masking tape you put on the outside. The flashlight or phone light will shine through the paint and you’ll be able to see where the shadow is from the post. When you want to stick the magnets just flip the body and shine the light through from the outside so you should be able to see the lines from the tape. That works for lighter color paint. You could also just preset all the magnets on the chassis with the 3m double sided tape then set it down slowly where it all lines up. Hope this helps!
@txgrs
@txgrs 6 месяцев назад
@@SeanLewisMedia thank you so much !!!
@SeanLewisMedia
@SeanLewisMedia 6 месяцев назад
Your very welcome! Best of luck!
@mattparker510
@mattparker510 6 месяцев назад
Where did you get that body?
@SeanLewisMedia
@SeanLewisMedia 6 месяцев назад
If it lets you see this link then right here🤘🏼 supergdrift.com/product/nissan-180sx-240sx-original-labo-s13-hatch-w-flipups-body-set-pandora/
@mattparker510
@mattparker510 6 месяцев назад
Sick. I thought it was a pre painted body because of the white. It's like the RTR body's from yokomo. What paint did you spray that white with? ​@@SeanLewisMedia
@SeanLewisMedia
@SeanLewisMedia 6 месяцев назад
@@mattparker510 The white body is actually a yokomo body sorry!
@mattparker510
@mattparker510 6 месяцев назад
@@SeanLewisMedia the purple 240/180 sx is a yokomo?
@SeanLewisMedia
@SeanLewisMedia 6 месяцев назад
No the purple one is the link i sent you, and that was a custom purple I mixed for my airbrush and then I backed it in white. im sorry I was confused, thats my bad. I backed it in white to make the purple pop more.@@mattparker510
@MicromittenHunter
@MicromittenHunter 9 месяцев назад
Things are way too pricey for what they are tbh
@SeanLewisMedia
@SeanLewisMedia 9 месяцев назад
They are pricey but they have been the only brand that holds up over time. Mine have been going strong for 6 months so its been worth the money so far. Its also one of the best solutions for the scale look of not having body post. If you know of any more budget friendly version I could for sure check them out👍🏻
@withlinbarhm760
@withlinbarhm760 5 месяцев назад
WAY to overpriced.
Далее
TESTED!!  Does Wheel Weight Matter in RC Drifting??
14:37
HOW TO INSTALL RC CAR BODY MAGNET STEALTH MOUNTS
4:23
Просмотров 2,1 тыс.
GGT RC Drift Track |  Thursday Night Laps!
3:53
Просмотров 1,2 тыс.
How to build magnetic body mounts.
10:14
Просмотров 12 тыс.
Building the FASTEST RC F1 Car
17:12
Просмотров 758 тыс.