How to Cover Depron RC Plane using Colored Packing Tape DIY XPS foam board tutorial (old school method 😊) Extra 330SC vertical stabiliser (fin) with rudder
Hi all , I will allow myself a little additional advice, think of passing a little bit of 400 grit sandpaper before sticking your tape, the adhesion will only be better on the depron. Of course dust off well after sanding good flight everyone
Have you tried duck brand package tape? They have a really beautiful reflective incandescent tape. They also have a reflective Silver and Gold. It like 4 bucks a role. Not much is on the role though.
Balsa is a very light but difficult material to work with (dust!). Always use "Oracover" type. Only CA (danger!) sticks to balsa well. Balsa is rigid but is like clay during overloading.
Круто! У тебя как всегда всё отлично получается! Но как у тебя не расплавилась потолочка (или другой материал, который ты используешь), когда ты проводил по ней утюгом?
As much as I tried, I didn't like working with packing tape. I used it several times on several planes and really hated working with it. I prefer using regular RC plane films. Its better quality and looks much better. Packing tape looks cheap, period.
The beauty of using something cheap like foam and tape is you can fly care free and dont have to hold in tears on your first crash, especially with a 3D plane, a lot of people dont build these to be hung on display at the smithsonian