RC4WD Bully2 RTR: 1st test run, stock... 

Merci l'ami ;)

Thx man... watch my others highly upgraded bully2 vids on my channel... those rigs are so fun to ride... and yes, almost unstoppable it's crazy...

Thx... yeah, they sell pretty quick...

Steeve Bouchard merci mon homme👍

Michael Williams ... Very good stock steering angle... It comes with dig and completely rtr👍... A very good value!

Choppinjw69 To be honest, I didn't try very hard to find the right setting cause I change the esc after couple of runs... Didn't found any infos about the esc (doesn't seem to be programmable) but the transmitter have quite some adjustments so maybe its possible to smooth things up a bit... Found out that the Novak m2 dig works great with this rig and the remote...

Choppinjw69 HH dual mini br smashed with a bec... best setup ever...

Hobbywing Quikrun programmable ESC for brushed motors is about 40 bucks and is getting great reviews. Will run one in mine once I get the dig unit from RC4WD.

Shot in Montréal, QC Canada 😉... Hope you'll like your... Check out rc4wd forum for some great tuning tips👌

Not the same rigs at all!!! If you want pure performance on rocks, go with the bully 2... If you're on a budget and prefer "scale" look and trail run, go with the r1👍

@@noname_rc great advice. 🤙🏻🔥😎🔥👌🏻👏🏻👏🏻👏🏻

MrDavide1976 You mean 4ws or 2 servo on the front axle?

mmmhhh!! i think i need some more informations, actually i don't know the differecnce but, by the way, there is the possibility to have this kind of upgrade on this kit....

mmhhh! i think i need some more informations, by the way, it is possible to upgrade this kit in this way, so i think it's going to be more complete....

MrDavide1976 No upgrade kit... you would have to buy another front axle and customise it... But if it helps, the steering angle is already amazing stock...👍

Chris Strobel Check for grease yes and locktite everything!!! probably need to re-wire as the motors wires are attached to the lower links... check on rc4wd and rcc forums for complete setup👍

Here, one of the best: www.rc4wdforum.com/showthread.php?13176-quot-Loaner-quot-Bully-2-RTR

Etienne Nt Hey thanks bro! That helps me a lot 👍

Etienne Nt Ohh hey, I was told of some cogging issues over at RCCrawler with the stock esc on this, a few places in your vid it does look a little jumpy, is that the cogging they are talking about? I was hoping to run mine stock for awhile before tearing it a part and replacing stuff with expensive parts like a Holmes dual mini esc like everyone recommends. Are you still running yours stock?

Chris Strobel Yes unfortunately, the stock esc doesn't have a lot of setting and yes, a bit of cogging :( It's possible to run it out of the box for a while but yes, u will rapidly want to switch to a better one (or 2!)... I run the Novak M2 dig with success and very easy to program with stock Tx (budget friendly)... Or the very best are 2x HH mini br dual👍

Yeah, a bit too prime at low speed, not as smooth as I wanted... But as I said, I took the rig straight out of the box and put a lipo in it... No calibration/programation/setup/tuning... Probably something that can be handle easily...

OK, thank you for the info! Shocks work very smooth and very good location!!

Better go brushed on a moa... Holmeshobbies are the best right now

viens me jaser sur FB... même nom que ma chaine RU-vid ;)

Eddie Mack 850mah 40c 3s lipo

No, didn't experience or heard of that specific problem about the Bully tires... !?! Are they correctly mounted/bead?

+Etienne Nt from what I can tell yes.

@@jamesmiller2005 mine's came with the same problem so I took them apart and remounted them if it's the problem

Small Nanotech 3s 450mah and 3s 800mah

Thinking this or something like a Axial bomber upgraded.

@@miketye2805 yes, this is a comp crawler... It is made for rock climbing and competition , not a trail rig at all😉

noname_ rc yea kinda figured. It looks so bad ass man! I think I need to get trail rig first get my feet wet lol this is def on my list in the future! Great video man!!

@@miketye2805 thx... And yes, comp crawling is really AMAZING man... Very fun and those rigs are so capable, it's crazy... 👍

noname_ rc yea I might consider going that route first but I have no idea where people would do that around me. Maybe I’ll check Facebook groups

Je fais partie des Team Driver RC4WD donc j'ai eu la chance de le tester dans les premiers ;) Mais en effet, ils sont partie vite en maudit mais RC4WD est supposé faire un re-stock fin septembre... On garde espoir...!

Chris Strobel in this video, not sure... I pretty much run it stock the first time...

more or less 30min/lipo

toestrrman as i said, this one is bone stock, right out of the box... so shocks are the one that come with the kit... manufature stock spring and a drop or 2 of oil... no set up at all... After this try out, I put the softer inner spring and 40t front, 50t rear if I remember correctly...

Thanks !

Can't remember but it comes from RU-vid library ;)

Josh Thomas yes... Rtr version comes with everything you need👍

Etienne Nt besides RC4WD.com do you have any suggestions on where to buy one??

Josh Thomas hummmmmm, maybe Tower, Amain, local hobbyshop...

Etienne Nt cool man thanks for the info. Also, are there any good groups you’d suggest to look up on RU-vid that have a good competition scene to follow? Where do I find competitions or groups that set these up?? Any info would be great! Thanks in advance brotha.

Josh Thomas check on FB for comp crawler pages👍

Etienne Nt... faut l'écrire exactement comme ça

Moi aussi... mais pas grand monde ici qui en ont donc toujours seul à rider...

I'm on Facebook, RCC forum, RC4WD forum, etc... yes no problem...

what your facebook name?

donut stop yes without a doubt... you have over 1000$ in that rig... and it's rtr so ready to go out of the box... Needs a bit of setup to perform better but nothing complicated or costly... Best (and only) rtr rig if you want to enter the comp crawler scene... worth every penny...

well it on sale for 500 dollars so im buy it what battery are you using

Cool... U won't be disappointed... As for battery, I'm running small 3s 850mah 40c lipo... U get about 30min of runtime...

nice ill be looking forward to getting it when my birthday comes around in 20 days :)

549

Don't worry, this was only the first run... I know what I'm doing😉