Тёмный

RC4WD TF2 Upgrade: Teraflex Revolver Shackles Z-Boxes 

Colibri FPV
Подписаться 7 тыс.
Просмотров 72 тыс.
50% 1

Here’s the RC4WD Teraflex Revolver Shackles and Z-boxes for the Trail Finder 2! Even with stock shocks they add tons of articulation. Here's the TF2 kit on Amazon: amzn.to/2pd5dZd If you’re considering these upgrades, here’s a few things you should know:
The Revolver Shackles and Z-Boxes are EXACTLY the same as the Shooter Shackles and T-Boxes, RC4WD has just added the “Teraflex” branding. I wasn’t sure about this so I e-mails RC4WD support and they confirmed.
The RC4WD website (link below) says that the Z-boxes only fit the rear, but they actually can fit the front, you just have to install them “backwards”, with the label facing inwards and the hardware facing out to allow space for the transmission.
Even though the Z-boxes CAN be installed up front, I’m not convinced that they SHOULD be installed up front…you get so much articulation that the vehicle will tend to lean on inclines, making it more likely to flip over, and they push the front shackles forward, causing them to hit the front of the body at full compression (this does not happen with just the Revolver shackles and not the Z-boxes installed up front).
My advice is to buy 2 sets of Revolver Shackles for the front and rear, but buy just one set of Z-Boxes, at least initially. That way you can test fit them up front and decide for yourself if you prefer more articulation or less lean up front.
Copyright compliance:
RC4WD logo used with permission.
All Good In The Wood by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/

Авто/Мото

Опубликовано:

 

30 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 150   
@19safe53
@19safe53 7 лет назад
just ordered a TF2 RTR, cant wait to start upgrades. thanks for the video
@poppysrcandmodels
@poppysrcandmodels 8 лет назад
Great video Jason! I like the upgrades, looks great too!👍👍
@erik8607
@erik8607 8 лет назад
this is awesome! recently started following, and I'm getting the tf2 soon as well and watching this upgrade made me feel more confident about my first upgrade thanks
@erik8607
@erik8607 8 лет назад
+The RC Cave (Jason) I will do so. update us soon on the tf2 :)
@Traxxas144
@Traxxas144 8 лет назад
My buddy just put these on his Gmade Sawback. It made a world of difference.
@ExtremeRC4x4
@ExtremeRC4x4 8 лет назад
Glad to see they finally got them licensed by someone! Maybe I'll do an overview of my tf2 setup sometime as it's super crazy! Thanks for sharing!
@Codesempire
@Codesempire 8 лет назад
Great video Jason. Those do seem to make a big difference. Thumbs up!
@TheTankRC
@TheTankRC 8 лет назад
Nice explanation of the upgrade, that is definitely somthing to think about.
@fixedgear.fl.4225
@fixedgear.fl.4225 4 года назад
Looks like simple hinge bolts on the far rear end of the end of while the revolver shackle bolts up sideways on other end of leaf spring. Nice video
@andyrichey1192
@andyrichey1192 6 лет назад
Thank you for sharing, I did this upgrade but I did not put the the boxes on the front just the back , and I took out the inner springs out of the back shocks it performs excellent
@satorrotas
@satorrotas 8 лет назад
Excellent update , great job !!
@BlackSmithRC
@BlackSmithRC 8 лет назад
Great upgrades and mods bro! MIDWID!
@stephenmulvey9821
@stephenmulvey9821 6 лет назад
Now if only they were in stock! Thanks for the vid
@sammygonzalez7627
@sammygonzalez7627 2 года назад
Thank you for explaining, I read where rc4wd said to get two sets of the shackles. And one of the Z boxes...I guess they already knew, putting Z boxes in the front wasn't really worth it. Even though you added them...thanks for the vedio 👍
@glennmatthiesen1749
@glennmatthiesen1749 Год назад
Hi Jason, thank you for this very informative video! I was able to find the original full size installation instructions from Teraflex for installation on a Jeep YJ. The way you have oriented the Z-Boxes in your installation is indeed the correct way according to the original manufacturer. Frame mount hinge to the outside for the front and frame mount hinge on the inside for the rear. I have just started the installation on my RC4WD Gelande 2 Cruiser. I am installing a complete set of Teraflex Revolver Shackles and Z-Boxes front and rear. There are no corresponding mounting holes in the frame, so I'm using Permatex Steel Weld Metal Epoxy to attach the Z-Boxes to the frame. I used some of the mounting components from the RC4WD Leaf Spring Kit to mount the Revolver Shackles at the front and oriented the hinges toward the front bumper to avoid interference with the steering linkage. I am using the RC4WD VVV-S0120 Ultra Scale Hardened Steel Driveshaft "Ver 2" (80mm - 110mm / 3.15" - 4.33") with no drop-out issues. I also had to purchase the RC4WD Z-S2111 Trail Finder 3 Front and Rear Leaf Spring Mounts in order to mount the Revolver Shackles at the rear of the frame. Once I have both front and rear suspension mounted to the frame, I will then determine the length of shocks to use. Currently the 80mm Rancho ones are too short. I will most likely go with 90mm ones.
@colibrifpv
@colibrifpv Год назад
Wow Glenn, your build sounds awesome, glad you were able to make it work! I never thought of checking the 1:1 installation instructions but I guess that goes to show that RC4WD really makes these things true to scale. Good luck with your build, it sounds like it's coming out great!
@HotwheelsRC
@HotwheelsRC 7 лет назад
Awesome truck ....really like the RC4WD Teraflex on it
@malfunk7192
@malfunk7192 4 года назад
Thanks for details! I hope to benefit from these soon.
@colibrifpv
@colibrifpv 4 года назад
That's great to hear, I'm really glad that it was helpful. Best of luck with the project!
@karlschweizer2554
@karlschweizer2554 8 лет назад
its a beast it brakes before it stops tons of power stock i did upgrades but not to many its a great truck
@Remoteaddicted
@Remoteaddicted 8 лет назад
Great video and nice upgrades.
@rctrooper7261
@rctrooper7261 5 лет назад
Great mod. I'll get those on order for my Marlin asap. You have my like and sub. Thanks brother.
@rcsnapon2132
@rcsnapon2132 4 года назад
Very cool upgrade
@pbtvproduktionen
@pbtvproduktionen 8 лет назад
Cool explanation! Well done!
@midliferc1165
@midliferc1165 8 лет назад
Well done Jason!! Looking good...
@midliferc1165
@midliferc1165 8 лет назад
***** ... Me either, well.... On the red one any how
@midliferc1165
@midliferc1165 8 лет назад
***** preach!!!! Lol
@dogcrick
@dogcrick 6 лет назад
Quality video. Nice job!
@Traxxas144
@Traxxas144 8 лет назад
Looking good man! I have made some big changes to my jeep. I went back to 1.9 and did some battery try mods.
@Traxxas144
@Traxxas144 8 лет назад
+The RC Cave (Jason) I put it sideways behind the body posts.
@BasBoyRC
@BasBoyRC 8 лет назад
Very good upgrade video. But this is the problem with leaf springs a lack of movement as my Gmade Sawback has the same problem. But that is only used for trailing only.
@adamkohler1240
@adamkohler1240 7 лет назад
Great informational video! My tf2 will be here Tuesday, and I will be using all your helpful info. Is there a way you can by chance post a quick link of the shackles and z boxes, so I know for sure I'm getting the right parts? Thanks in advance, awesome work sir!
@barrybarker5646
@barrybarker5646 7 лет назад
Goog video very informative I'm new to rc 4x4 so helped me a lot thanks👍👍
8 лет назад
woowww that is a really good upgrade and nice work 👍👍 thanks for sharing :-))
@crawlervideo
@crawlervideo 8 лет назад
Very nice upgrade,what i miss is more droop in every scaler/crawler suspension.Any 1:1 droop in half of there suspension travel for a good flex.The most RC springs are to stiff or hard to articulate well.
@rickferguson943
@rickferguson943 3 года назад
Cool,my might try to install them in my mountain rider
@colibrifpv
@colibrifpv 3 года назад
They are pretty pricey but a ton of fun and they look awesome!
@sirchirpalot
@sirchirpalot 8 лет назад
Good vid. I have the older T Boxs front and back on my TF2, But in the back i have mine flipped like your fronts and bolted to inside of the frame rail. And I have had them setup like this for over a year with no probs,
@sirchirpalot
@sirchirpalot 8 лет назад
I'm not 100% sure but i think when RC4wd had T Box's listed they said they do fit front and rear. I'm hard on my TF2 . My susp holds up well. But i have 8 full leafs. 2 red and 2 black on front and 4 black on back with long helper on each leaf pack, Still have 4 and half inchs of flex
@sirchirpalot
@sirchirpalot 8 лет назад
Look me up on FB Randy SirChirpAlot
@spikonaleash
@spikonaleash 7 лет назад
purchasing a TF2 myself soon as well, im excited to get it ! ive owned scx10 and a wraith always wanted a more scale realistic truck
@spikonaleash
@spikonaleash 7 лет назад
The RC Cave thanks man! im totally subbing , do you have any tips and tricks for the tf2 i was also going to buy the topper for it too
@spikonaleash
@spikonaleash 7 лет назад
The RC Cave awesome thanks ! i will make a video once its all fixed up, also i have heard of using the metal return spring from the pull start of a mower for a softer leaf spring i think ill try it see if i can get a lil more flex but also cant have too much flex so we'll see
@RCTechBattles
@RCTechBattles 8 лет назад
Looks very nice, cool vid
@abgecrawlt4218
@abgecrawlt4218 8 лет назад
The Upgrade works very good👍
@RenoBoyzRC
@RenoBoyzRC 8 лет назад
awesome video!!
@jasonclapp8368
@jasonclapp8368 7 лет назад
Are you running all of the springs on both front and rear with those shackles and Z-boxes? My truck squats a little more than I would like with my set-up. I am running the large springs both front and rear and medium spring in the front only.
@nickmartin8039
@nickmartin8039 3 года назад
They work good have this setup on my blazer
@JaxTellerRC
@JaxTellerRC 8 лет назад
Looks like a must do upgrade for these! Amazing the difference they have made. Great vid Jason! I heard these aren't cheap, soldier of fortuning must be paying off down there ha ha (0;
@JaxTellerRC
@JaxTellerRC 8 лет назад
***** Ha ha ha, I believe you LOL
@rickkentner1713
@rickkentner1713 7 лет назад
Love what you did! I'm subbing. Gotta do that to my new (first) tf2.
@zacharyvalek3447
@zacharyvalek3447 5 лет назад
Did you have to get longer driveshafts for yours? After the zbox n shackles? If so what did you get?
@midliferc1165
@midliferc1165 8 лет назад
One quick note about the z-boxes up front... By snugging up the bolts you can " dumb them down" so they are not so free... Or you can lock them closed .. I have done both,
@midliferc1165
@midliferc1165 8 лет назад
***** . Yes sir!
@tyronedunkley3038
@tyronedunkley3038 3 года назад
So you do revolvers in the front too? Even if you don't have z-boxes for the front? I only have Z-boxes And Revolver for the rear so far??
@camorcconcepts8043
@camorcconcepts8043 8 лет назад
dude that is so sweet!..
@rcjono
@rcjono 2 года назад
This is still a great video! 👌💯
@colibrifpv
@colibrifpv 2 года назад
Thanks a lot 🙏 👍😁
@rcjono
@rcjono 2 года назад
@@colibrifpv cool channel! Subbed!
@colibrifpv
@colibrifpv 2 года назад
@@rcjono Thanks for your support Jono!
@megarcchannel
@megarcchannel 8 лет назад
cool vid my friend:)
@210gnx
@210gnx 6 лет назад
were the internal springs in the shocks removed?
@reddeerrebelrc6674
@reddeerrebelrc6674 6 лет назад
You did the Xboxes and shackles on the front?
@rccrawler70
@rccrawler70 5 месяцев назад
How are you? Thank you for such valuable information. I just bought an RC4WD Trail Finder 2 "LWB" RTR Scale Truck w/Chevrolet K10 Scottsdale Hard Body, and it has this big Problem. The suspension is too harsh. I'll get these parts to update it.
@colibrifpv
@colibrifpv 5 месяцев назад
Hey, thanks a lot for watching! That's awesome, it's a fun crawler you'll have a blast with it! Tinkering is my favorite part, I spend 10x more time on the bench than actually driving it : )
@tomlucasrccrawlers9108
@tomlucasrccrawlers9108 8 лет назад
Very nice Jason. You gunna do the D110 Shock-hoops and 100mm shocks up front, 90mm in rear? You'll pick up another good inch and half. It's funny how alot of guys think Shooter-shackles and Z-box's are cheating but to me...some real Toyota guys use them on their real 4x4 so what the big deal. I did the O-ring modification and moved the leafs around a little....short leaf on top for anti-wrap and mediums on the bottom for support. I get about 3 inches of flex. But curious what kind of flex I would get if I put my Shooter-shackles one it. Also....you gunna do the Motor-drop conversion on that one?
@tomlucasrccrawlers9108
@tomlucasrccrawlers9108 8 лет назад
***** yes..Josh is run'n longer shocks. I've tried 110mm King Shocks and they were too long. 100mm are better. Right now I'm running 90mm all around. I'm really happy but later will buy the 100mm. It really helps. I really am getting about 3 inches with those simple mods but just moving the leafs around wouldn't have given me the flex I wanted...the O-ring modification is where I'm giving credit to. Are you with "RC4WD Trailfinder Fan Page" on Facebook? Thats where I've gotten most my tips. A friend Nathan Crandall is getting right at 3.5 inches of flex with no Shooter-shackles or Z-box's. All he did was the O-ring modification and the Chino-modification(hard to explain without pictures) and from just looking at it , it looks stock. I seen his truck and got to hang with him last weekend. Truck runs really good and the suspension is very smooth and compliant. Nathan's a great guy. Mid Life RC has a very extensive video of the motor-drop conversion. I can't out do that video or add anything to it...it's a good one....you should do that mod while your waiting on parts. Only takes maybe 30 minutes at most. Tom
@tomlucasrccrawlers9108
@tomlucasrccrawlers9108 8 лет назад
Hey Jason. The 100mm will work in the back but you'll need to run them on the inside mount. The Trailfinder Facebook page you have to spell out just like this "RC4WD Trail Finder2 Page". Those exact spacing. Just ask for permission to join. Terry will approve it fairly quick.
@tomlucasrccrawlers9108
@tomlucasrccrawlers9108 8 лет назад
*****​ No problem, your welcome buddy. I've had my TrailFinder about 3.5 years or so and less than a couple of months ago I put the Revolver motor in it then the motor-drop conversion and then I found that TF2 page.... it's really renewed my interest in my Truckfinder. I've done so many modifications to my Trail Finder that it performs easily as good as an well set-up SCX10 with weights in the wheel and a low turn motor. Tom
@tomlucasrccrawlers9108
@tomlucasrccrawlers9108 8 лет назад
*****​ Your right Jason. Just hope...even with all the upgrades that it holds together with all the attention it's been getting. I've never babied it but now it just makes sooo much torque and with the offroad enhancements I drive it even harder than I used to. I just know a lot of guys have been having problems getting the right parts for their TrailFinder 2 lately and don't want to be one of them guys. Tom
@tomlucasrccrawlers9108
@tomlucasrccrawlers9108 8 лет назад
*****​ you know Jason....I don't think I ever paid a $10 fee to be in the Super Saver club. But I know I'm a member.... definitely some good savings over a regular customer. I bought my first kit , a Clodbuster there in 1989. I bought my daughters Honcho a couple of Christmases ago for $290 to my front door. Great customer service. 8 or 9 years ago I broke a knuckles on a Wednesday(Tower was closed because it was 1am)....had a 2.2 comp on Saturday and was leaving for the comp on Friday with my two boys. They had the knuckles to me in 24 hours. Ya.....let's see RC4WD have that type of customer service.... they won't even pick up their phone. RC4WD never sent me the wrong part(but I hear it alot on TF2 fan page) but they're shipping and customer service sucks and since they redesign their website you can't hardly find anything.  Tom
@scottweatherbee7493
@scottweatherbee7493 Год назад
Hi just curious I have the 1/24th scale trail finder 2 and I love to do something like this, i was just wondering if there's any sort of mods like this for the smaller rig
@colibrifpv
@colibrifpv Год назад
I don't think RC4WD makes these for the smaller version...
@Ettawon1
@Ettawon1 7 лет назад
every place is backorder or soldout. came across tgn distribution. they had them in stock $39
@925bigmac
@925bigmac 7 лет назад
Hi, this is a nice informative video I must say. I have a question, is this setup better (articulation wise) than a 3/4 link setup? not sure which way I want to go.
@925bigmac
@925bigmac 7 лет назад
The RC Cave Oh I see, I think I'll stay with leaf springs. Thank you for the input.
@925bigmac
@925bigmac 7 лет назад
The RC Cave Thank you, hope to see more of your videos.
@claygang199
@claygang199 5 лет назад
Jason, with the revolver and the z boxes up front do you notice any sloppy steering?
@3NriiQwE
@3NriiQwE Год назад
I have this problem bro
@lil_curious61
@lil_curious61 3 года назад
Will these work with the lwb version
@rcradiocontrol7785
@rcradiocontrol7785 3 года назад
Wow nice
@colibrifpv
@colibrifpv 3 года назад
Thanks a lot my friend, I really appreciate it!
@jimfeeney9499
@jimfeeney9499 5 лет назад
Can these be used on a bruiser, or mountaineer?
@rogerlopez1109
@rogerlopez1109 2 года назад
Are you having any problems with your drive shafts popping out under articulation ??? I purchased this complete set and I'm having problems now.
@colibrifpv
@colibrifpv Год назад
Sorry I didn't see your comment. I had actually already upgraded the drive shaft on mine so I didn't have that problem. Maybe try a longer drive shaft?
@3dman875
@3dman875 Год назад
Thanks for the information about tf2
@colibrifpv
@colibrifpv Год назад
You are welcome, thanks a lot for watching, I appreciate your support!
@jeremycarter255
@jeremycarter255 4 года назад
I had the exact same truck but real
@tysonnucifora353
@tysonnucifora353 Месяц назад
Great vid! But Running z boxes backwards is no good as they'll want to swing the leaves in the wrong direction
@colibrifpv
@colibrifpv Месяц назад
I didn't realize that, thanks very much for the feedback
@victor-ri7ey
@victor-ri7ey 2 года назад
Are you running the shock springs with that setup
@colibrifpv
@colibrifpv 2 года назад
Hi Victor, yes I am running the stock shock springs. It works great, but this one mostly just lives on my shelf...
@christopherjenkins7718
@christopherjenkins7718 7 лет назад
I have a question, if I want to put these on my tf2 the revolver shackles are completely different from the z-boxes? Can you please explain this to me and give advise on what you would do for the front, like put just the shackles or just the z-boxes because I don't want too much lean in the front. Then I would probably do both of them in the back but can't seem to find the revolver shackles on the rc4wd website. Thanks so much I really liked your video!
@christopherjenkins7718
@christopherjenkins7718 7 лет назад
The RC Cave thanks so much I'm 13 and am getting into the hobby.
@christopherjenkins7718
@christopherjenkins7718 7 лет назад
The RC Cave also, on my tf2 I had to replace both of the drive shafts with metal ones, did you have this problem?
@christopherjenkins7718
@christopherjenkins7718 7 лет назад
The RC Cave I also know that you can take leaf springs out to give it more flex but don't know how many to take out. Have you done this? I was thinking of just doing the main link and the smallest one, thanks.
@christopherjenkins7718
@christopherjenkins7718 7 лет назад
Thanks you've been great help to me
@christopherjenkins7718
@christopherjenkins7718 7 лет назад
Cool thanks
@rcjan5690
@rcjan5690 7 лет назад
Hei , interresting video...do you think something like that can fit leafspring on my gmade sawback? I`m new to this hobby, and do not know much about "hop ups"??? My english is not the best..am from Norway..
@rcjan5690
@rcjan5690 7 лет назад
Thank you sir..i will do..:-)
@chriscullen2900
@chriscullen2900 2 года назад
I have a k5 blazer and i put the z boxes on the front and back
@colibrifpv
@colibrifpv 2 года назад
Nice 👍
@sixtochino
@sixtochino 5 лет назад
Question did you have to change your front and rear driveshaft ? I just did the rear lift on it and my driveshaft keeps coming off ?
@colibrifpv
@colibrifpv 5 лет назад
I didn't have to on mine. I think the punisher drive shafts are a worthwhile upgrade if you need new ones. but I'm not sure if they're longer...
@dwightmazinakouskang1916
@dwightmazinakouskang1916 4 года назад
sixtochino have you solved your problem? if so what did u do?
@angelpelcastre3328
@angelpelcastre3328 3 года назад
Great video ....question: 4 shackles and 4 Z boxes In total ?
@brianwood9849
@brianwood9849 3 года назад
2 of each
@dwightmazinakouskang1916
@dwightmazinakouskang1916 4 года назад
after installing the zbox on the back my drive shaft falls off. what drive shaft would you recommend
@colibrifpv
@colibrifpv 4 года назад
RC4WD makes some upgraded driveshafts called "Punisher" drive shafts, you may want to check them out. Although, it sounds like your problem is that you have so much articulation that the drive shafts are extending too much, is that right? I know the punishers are much stronger because they are made of metal, but I would have to look up the length of the punishers to see if they are any longer...
@1982pantro
@1982pantro 3 года назад
Hi,I just got mine,my rear shaft keeps slipping out, do i need a longer shaft? Where could i get one. HELP PLEASE
@brianwood9849
@brianwood9849 3 года назад
Yes longer shaft
@NAVITECH.157
@NAVITECH.157 8 лет назад
bonita camioneta
@ghoulishgetups5815
@ghoulishgetups5815 2 года назад
Could I just run the shackles in the front and back and just not do z boxes at all?
@colibrifpv
@colibrifpv 2 года назад
I'm pretty sure you could, can't see why not as long as there is good tire clearance
@TinShackVideos
@TinShackVideos 7 лет назад
How come no one in the RC world knows how revolver shackles are supposed to work? All you have done here is made a rigid shackle lift.The shackles are supposed to be collapsed on them selves,then open up when flexing,thus maintaining stock ride height.
@TinShackVideos
@TinShackVideos 7 лет назад
Sorry for coming across like a ºIº ... maybe a little experimentation is in order. Keep up the good vids!
@garrettwilliams889
@garrettwilliams889 5 лет назад
So I just installed the z boxes in the front and my drive shaft slips out. Did you run into this problem
@colibrifpv
@colibrifpv 5 лет назад
I haven't, but mine gets pretty close. I imagine you'll have to limit the travel just a bit to prevent that, or go with some upgraded drive shafts like the punishers, which you would probably have to do eventually anyway because I hear the plastic ones often break, although mine have been just fine.
@effinhaoli808
@effinhaoli808 4 года назад
Garrett Williams longer drive shaft I think I went with punisher for the wraith
@karlschweizer2554
@karlschweizer2554 7 лет назад
i know im off the subject but i been running leafs for 5 years my rig is full scale and a single speed but i hate how stiff it is so im just giving up and putting the 4link and 3link on it and a 2speed trans i know thats not scale but i think is going to be bad ass and faster i just think i will run it more and it will keep all 4 tires planted on the ground at lest better no more comp just fun its retired
@karlschweizer2554
@karlschweizer2554 7 лет назад
i really want to stay scale that was the main thing but it was like a board i tryed the red soft leaf spring but it was still so stiff thanks for responding but the truck is so much better i did built it for scale but it is so much better with the links and coil over shocks i will build a scale one next
@karlschweizer2554
@karlschweizer2554 7 лет назад
the rc cave thank you so much scale means a lot to me and i will build a other one that is the trail finder 2 is so fun and will never die
@jeremyoshea7941
@jeremyoshea7941 2 года назад
I just tried this on my 4Runner, stick drive shaft isn’t long enough?? Did u have the same problem
@Mr.Bryan1234
@Mr.Bryan1234 2 года назад
You will need to get a longer drive shaft if you do a lift or more articulation
@colibrifpv
@colibrifpv Год назад
Sorry I didn't see your comment. I had actually already upgraded the drive shaft on mine so I didn't have that issue. Was your problem resolved with a longer drive shaft?
@crawlervideo
@crawlervideo 7 лет назад
Watch the video too from "Race730" he makes with longer shocks and this set up a unbelievebale articulation!
@3NriiQwE
@3NriiQwE Год назад
I followed the instructions in this video to install teraflex in the front area but the steering is slipping somebody help me? :(
@colibrifpv
@colibrifpv Год назад
Sorry to hear that. What you you mean by slipping, is the steering linkage hitting something?
@3NriiQwE
@3NriiQwE 11 месяцев назад
Yes :( Maybe need more OZ on my servo?
@RcAVENTURE.V.F.R
@RcAVENTURE.V.F.R 8 лет назад
👍👍👍👍
@craig8159
@craig8159 6 лет назад
Can't find em at rc4wd. can you give me the part numbers for them,.Thanks
@craig8159
@craig8159 6 лет назад
Wow! it's like 50$ cheaper at RC4WD than on amazon. dang.
@craig8159
@craig8159 6 лет назад
The revolver shackels are like 100$ cheaper at RC4WD. than on amazon.
@craig8159
@craig8159 6 лет назад
Oh yea forgot about tower hobbies thanks. and yep your right. I looked up Teraflex it's self my bad it was there that the price was high.
@patrickhooker8936
@patrickhooker8936 2 года назад
Can someone link me to these products please?
@colibrifpv
@colibrifpv 2 года назад
Hey Patrick, here are the Revolver Shackles on Amazon: amzn.to/3BKm8oa Here are the z-boxes on RC4WD: store.rc4wd.com/RC4WD-Teraflex-Revolver-Z-Box-for-Trail-Finder-F-350-Hilux-Tundra_p_4709.html Best of luck with your build!
@kennethlarsson1499
@kennethlarsson1499 8 лет назад
How much does these lift the truck?
@kennethlarsson1499
@kennethlarsson1499 8 лет назад
+The RC Cave (Jason) I know what they do, but it looks like they add roughly 10mm in height thats why I had to ask. :) I'll get mine soon, adding these to the shopping cart. Thanks!
@SanSanychTV
@SanSanychTV 8 лет назад
Thumbs up) I subbed)
@johnbasterson7938
@johnbasterson7938 4 года назад
Or buy 20 cents worth of O rings and install them on the leaf screws top and bottom. Your welcome to your wallet. And you have the added benefit of a circle symmetrically fitting both front and rear screws!
@MrStingraybernard
@MrStingraybernard 5 лет назад
$70 just for the shackles ? Don’t think so
@colibrifpv
@colibrifpv 5 лет назад
Yeah, RC4WD stuff is insanely expensive. Check out Tower Hobbies and join their club. They stock RC4WD and you can get some coupons, which will help a little...
@mrk1075
@mrk1075 7 лет назад
That's not a trail finder. that's a early 80's Toyota Tacoma.
@jeffmullinix7916
@jeffmullinix7916 7 лет назад
mrk107 . In Japan and other countries like England they call the Toyota pickup trucks Hilux until late 1995 . Here in the USA we called them just Toyota Pickups if the truck was an SR5 then we called them that . I know I owned 4 Toyota's trucks in my life time . The The last I bought was in 1995 . The New model . It was the first Toyota truck that actually have a name for the first time here in the states . This was my last new Toyota I bought and it was the first Toyota Tacoma . All other models before that was hilux or just Toyota . I notest on Craigslist that people are starting to call earlier models Tacoma's when they are not Tacoma's . This sort of pisses me off when people do this . In late 1995 was the first year for the SE 2200 to end and the beginning of the RE2400 engine . The RE2400 had a lot more power than the RE2200 and with the 5 speed trans it got upwards of 30 MPG . My Tacoma got 32 MPG and it was 2wd with the 5 speed . My wife and I put almost 300.000 miles on that truck in 21 years we owned it and only replaced tires Brakes pads , clutch kit . Batt , and a starter . That was it . Best truck we had ever owned . Then Toyota made them bigger and taller and that sucked .because when they did that the MPG went down the drain to about 25 MPG . I am just letting people know the history of the Toyota truck and the Tacoma truck .
@gaijinhalfwit
@gaijinhalfwit 4 года назад
Jeff Mullinix So true. I had a lifted 94 Toyota SR5 Xtra Cab with the V6. It was reliable and looked good too.
@patricemayeras3843
@patricemayeras3843 5 лет назад
👍👍👍👍
@colibrifpv
@colibrifpv 5 лет назад
Thanks a lot 😃
Далее
RC4WD Trailfinder 3 - I'm not happy.
28:09
Просмотров 85 тыс.
I Built 100 Homes And Gave Them Away!
09:36
Просмотров 42 млн
4th annual Trailfinder Fun Run 2018  -  d1rc  -  RC4WD
15:34
RC4wd Yota1 vs Yota2 axles, Whats the Difference?
6:41
Are Revolver Shackles Dangerous??
5:59
Просмотров 114 тыс.