Re-programming TPMS sensors on a GM vehicle using El-50448 TPMS Re-Learn Tool (2019 Chevy Impala)

Подписаться 1 тыс.

Просмотров 244 тыс.

50% 1

In this video, I use a basic Tire Pressure Monitoring System (TPMS) tool re-learn tool to re-program my TPMS in my 2019 Chevrolet Impala.
The TPMS re-learn tool I used is an Augocom EI-50448, though there are many identical looking ones out there.
Planning to buy online? Sign up with a cashback site first to get a rebate (typically 2-5% of total cost) from tons of retailers! Plus, get a bonus on your first purchase (bonus amount changes from time to time)... below are the sites that seem to have the best cashback now:
USA Signup: www.topcashbac...
Canada Signup: www.rakuten.ca...
Amazon.ca : www.amazon.ca/...
Amazon.com : www.amazon.com...
For anyone else with a 2014-2020 Impala (likely very similar procedure for other GM vehicles), here is how to do a TPMS re-learn:
1) Enter diagnostics mode by holding the ignition start/stop button for 5 seconds (do not press the brake pedal)
2) Find the tire pressures page on the dash display
3) Hold down the ‘checkmark’ button on the steering wheel. The horn will sound twice
4) Go to the front left tire. Position the TPMS tool near the valve stem and hold the button until the horn beeps
5) Go to the front right tire, and do the same thing
6) Go to the rear right tire, and do the same thing
7) Go to the rear left tire, and do the same thing
8) The horn will double beep to indicate success. Turn off the ignition, start car, and you should be set!
Note that you may need to hold the button for a while... it took close to 30 seconds to pair the first TPMS sensor. Just hold the button until the car beeps at you at each wheel.
If you found my video useful and would like to support me, thank you! You've got a few options:
Subscribe to my channel
'Like' the video
Sign up with a cashback site using a link above
Thanks

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 196

@JohnJones-ij1mb 6 месяцев назад

Ordered unit from Amazon... set my tires with ease on my PontiacG8gt! Thanks for the how to vid!👍🏿

@rubbercheesereviews 6 месяцев назад

Excellent, glad it the Australian cars use the same system. Awesome car btw!!

@raolito1980 Месяц назад

Here 2024 mine still works. Just did it on a 2019 Escalade.

@clnelson321 2 года назад

That black antenna is also a great way to hold against the sidewall/rim as close to the valvestem as possible. Try holding it straight on to the rubber the closest to the valve and it might help it pick up the signal better. Especially true with a weak transmitter.

@rubbercheesereviews 2 года назад

That hasn't been my experience - I tried a few new ways of holding it when reprogramming tonight after reading some comments similar to yours. I think the unit scans codes until a connection is made, so sometimes it is very quick to 'connect', and other times it takes much longer.

@Ole_Friis_Heesgaard 2 года назад

@V Nelson Thanks for tip, that did it for me 🙂

@cesarle2336 Год назад

It worked for me also, thanks for the tip :D

@jamesyurick2201 5 месяцев назад

After many unsuceesful tries with other videos I came across this one. It it is the best and fixed my problems relearning the TPMS on my 2015 Tahoe Z71 after rotating tires. I used the cheap Amazon EL-50558. Important note: as he says in the video sometimes you have to keep holding the button down since it can take longer on different tire positions. Also, I used the 5 second hold on the start button (don't press the brake pedal) and did it without the engine running.

@rubbercheesereviews 2 месяца назад

Glad to hear it worked for you! I always leave the engine off, and based on some comments on my video, I suspect engine idling MAY interfere with programming.

@jakefeddersen318 16 дней назад

Put the tool antenna on the tire below the valve stem if you dont wanna waste your time.....thats what they teach the techs

@rubbercheesereviews 15 дней назад

I've tried after receiving many comments like this - it makes no difference with my car and tool. I suspect this tool is either less powerful or slower scanning than professional tools used in shops where that might make a difference.

@arontesfay2520 5 месяцев назад

You're supposed to hold the antenna against the sidewall of the tire. Sometimes, it may not read the sensor if you don't do that

@rubbercheesereviews 5 месяцев назад

I've tried holding the antenna different ways (especially after receiving similar comments after posting this video) - it makes no difference at all to me. I believe the delay is as it cycles through codes and may be influenced by battery level of the tool and/or TPMS

@jgbwrestling 2 месяца назад

@@rubbercheesereviews I tried the tool and I hear the light honk for the first two tires but starting on the third it does not honk and because of that I’m not able to finish the relearn and now all four tires show no psi before 3 showed. What do you think I’m doing wrong?

@creativecolourful4664 18 дней назад

Hi, will this tool work on Land Rover Evoque 2020, also does any one know how to put Evoque in learning Mode.

@Nelosification 3 года назад

Bought one and worked first time 😊 Apparently the garage said all my tpm sensors where faulty at £100 a pop they lied. Great video thank you saved me money.

@rubbercheesereviews 3 года назад

Great to hear!

@robertpaulson8094 Месяц назад

No luck on 2015 equinox. Waited a min and tried on all 4 tires never beeped. But got beep and went into learn mode😊

@SixTwoHemi 2 месяца назад

3:10 starts the process

@jgbwrestling 2 месяца назад

I tried the tool and I hear the light honk for the first two tires but starting on the third it does not honk and because of that I’m not able to finish the relearn and now all four tires show no psi before 3 showed. What do you think I’m doing wrong?

@rubbercheesereviews 2 месяца назад

You may be doing nothing wrong. I'd try again a couple of times, and move the tool around a bit at the third tire. If still no luck, the battery in that sensor may be too flat to work and the sensor will need to be replaced. This system doesn't allow programming unless all four tires are programmed together.

@jgbwrestling 2 месяца назад

@@rubbercheesereviews thanks for the info I appreciate the response I’ll keep trying 😃

@PermaVexed Год назад

Solid tutorial, thanks a lot

@CaptEricS 6 месяцев назад

I'm an ASE CMAT and this whole system is crap. What water head thought of this !?? My 2001 Corvette resttes itself when then PSI is correct. I've used this VXDAS GL- 50448 on my 2012 Acadia 3 time = CRAP

@davidthompson1076 3 года назад

If you put the antenna close to the tire much faster just a tip and a single press of the button is all that is needed

@rubbercheesereviews 3 года назад

That hasn't been my experience - I tried a few new ways of holding it when reprogramming tonight after reading your comment and a couple similar. I think the unit scans codes until a connection is made, so sometimes it is very quick to 'connect', and other times it takes much longer.

@mattcampbell3363 2 года назад

Thanks. This worked for my 2020 chevy traverse. Also try pointing the antenna through the rubber to the back side of the valve stem.

@rubbercheesereviews Год назад

I'll give that a shot when I switch back to winters, thanks!

@rsmith317 2 года назад

Just did this with my 2014 Chevy Malibu at the gas station….. and of course everybody lives in a constant state of fear. There was a woman pumping gas and as my horn kept honking she was jumping and staring at me wondering whats going on.

@rubbercheesereviews Год назад

Hahaha, I usually do mine at the office now (empty parking lot, not many people around) because I get some weird looks from people walking by when I do it in the driveway!

@davechupp7922 2 года назад

It worked! Getting to the learning mode on my Buick is a little different, but just as easy. The rest of the procedure is identical. It took less than 2 minutes. I bought the EL-50448 from Amazon. A different brand, but identical unit for less than $13. I am so grateful for you and this video. Thank you.

@rubbercheesereviews 2 года назад

You're welcome, glad you were able to get it programmed!

@seangowan7441 2 года назад

Can this help if a tire is reading low than others and i check the pressure manually and it's fine?

@rubbercheesereviews 2 года назад

It depends why you are having this issue - if the sensors aren't corresponding to the correct tire, reprogramming will help. If the sensor is just reading incorrectly, I doubt this would help. Have you checked all tires to see if one actually is the low pressure reported by your vehicle?

@jamesjenkins9568 3 года назад

Were you able to get them to reset while your snow tires were on??? Thats the problem I'm having with my new rims the sensor isn't working

@rubbercheesereviews 3 года назад

Yes, I have my all-seasons and snows on different rims, and I use this tool to program the system each time I do a tire swap. If you are having problems, possibly one of your TPMS sensors is bad. Apparently TPMS sensors typically last 5-10 years, though my limited experience with them is that the OEM ones last a little over 10 years.

@jaredpatterson1701 2 года назад

😭 nothing I'm doing is working! My car doesn't have that tire menu. I only get tire learning active by holding lock/unlock buttons.

@rubbercheesereviews 2 года назад

What year and make/model of car? A few possible issues: your car doesn't use this type of TPMS programming tool, your TPMS sensors are bad (e.g. dead batteries), or your TPMS programming tool is bad (my first one didn't work).

@jaredpatterson1701 2 года назад

@@rubbercheesereviews it's supposed to be for a 2010 impala, and the tool is the same one you're using. I guess it could be dead sensors..

@rubbercheesereviews 2 года назад

@Jared Patterson From a quick web search for 2010 Impala, I think you just need to remove (or add) air one tire at a time for the re-learn; give that a try. There is also a good chance that TPMS batteries are dead - the sensors in my 2007 DTS started giving out at around 10 years old.

@dting22 Год назад

Just did this on my 2023 Camaro SS. Exactly as you described. I previously could not get one of the tpms sensors to detect while I tried the reset sequence with the engine running. But your video inspired me to use the five-second start button hold to get the car into tpms reset mode with the engine off. I suspect the engine, while running, must send out enough RF interference to mess with the weak signal coming out of the reset tool. Anyway, doing the procedure with engine off worked great. Thanks!

@rubbercheesereviews Год назад

Glad it worked better for you with engine off! Nice ride too!

@secondhandmerchandise 3 года назад

4:48 Holy cow what size tires do you have??? that can hold 236 psi? Wow

@jckhammer 3 года назад

Nothing wow about it. Its metric not PSI ..If he had it on imperial it would show PSI at about 35 or so. I assume you live in the U.S.

@secondhandmerchandise 3 года назад

@@jckhammer Yes, in the US. Thanks for clearing that up.

@jckhammer 3 года назад

@@secondhandmerchandise NP , I'm in canada and my Silverado has both metric and imperial. My older uncles need it on imperial as all they know is PSI. I'm use to the metric Kpa lol. Cheers

@HelenLangworthy-j2t 13 дней назад

Hall Deborah Garcia Frank Thompson Matthew

@galaxya2289 3 часа назад

Why your tire pressure too high

@HarringtonWebb-l5d 14 дней назад

Lewis Thomas Johnson Nancy Martinez William

@HovsepG. 9 месяцев назад

Didn't work for my Chevy volt 2017 :(

@cliffjamerson3107 4 года назад

Thanks

@SenehaKhatun-r2q 11 дней назад

Davis William Anderson Thomas Lewis Larry

@DarrellWiley-q1c 13 дней назад

White Michelle Lopez Dorothy Martinez Ruth

@floresbros704 Месяц назад

Hello I have a 2018 acadia and I replaced the Tpms sensor on the rear driver side wheel and the tool still will not read it but it will read the other 3 sensors Not sure what else to do I tried releasing air I tried driving for about 20 minutes like the instruction manual says..any ideas?

@rubbercheesereviews 15 дней назад

It is possible that if it is aftermarket, the sensor may need to be initiated to 'talk' with GM parts. If this is the case, you may need to use a "professional" scan tool to initialize the sensor. I'm not 100% sure on this though since I haven't ever replaced a TPMS sensor before. My summers are my OEM wheels; my winters are mounted on used OEM wheels that I bought (from another Impala).

@angelinamacalister1740 11 дней назад

Thomas Mark Young Sandra Williams Linda

@simonnofisher4422 14 дней назад

Hernandez Jessica Young Linda Anderson Edward

@BealleMoriniE 10 дней назад

Thomas John Miller Daniel Lopez Anna

@curtisgarcia5732 Год назад

Can this also be done even though some sensors are working, to find out which one is the problem

@rubbercheesereviews Год назад

I suppose that would work... if you go from tire-to-tire and find out which one doesn't cause the car to beep. With that said, if you have one bad sensor, it is likely that the others will go bad relatively soon so might be worth swapping them all.

@brandonm8131 Месяц назад

Does that green light flash all the time or only when near the tire? I just bought on and bought a battery and no light comes on.

@rubbercheesereviews Месяц назад

Should flash whenever the button is pressed. Check your battery, or maybe you got a faulty unit?

@JeffreyWest-p2u 15 дней назад

Miller Carol Walker James Thomas Brian

@jefferybecerra6598 3 года назад

My tool is beeping on every tire except the last tire which is the back driver side...

@rubbercheesereviews 3 года назад

Might be a dying TPMS sensor/battery. If you know it is working, start over - I had a similar issue once where I had to start over twice before my right front would register (the TPMS sensors are about 5 years old). I'm not sure if this is due to a fading battery, or just a fluke.

@bnbb2004 2 года назад

I'm experiencing the exact same thing, where the last tire (back driver) is not beeping. I've tried like 5 times. Smh 🙄 I have another tool. Maybe, I should send this 1 back and try the one u have in the video.

@davechupp7922 2 года назад

My last tire took a couple of try's. I was a little anxious until it worked.

@LuisHill-n8e 13 дней назад

Moore Richard Anderson Jason Moore Sharon

@Ben-tr 8 месяцев назад

My 2019 chevy trax doesn't show tire pressure ..it happened all of a sudden ,haven't changed tire or sensors idk what caused this..I ordered one on ebay

@tukufuzubar7023 3 года назад

The reason why it's taking so long, is because you're holding it in the wrong position. You need to point the antenna towards the tire not away from it

@rubbercheesereviews 3 года назад

Not true - I've played around with how I hold the programmer on subsequent tire swaps after other people left similar comments, and it really doesn't make any difference. For each swap, I find that 2 or 3 TPMS sensors register very quickly, but 1 or 2 tend to take a bit longer.

@goldwingconepatterns2565 2 года назад

@@rubbercheesereviews Each sensor has a battery within it. Some might be weaker than others depending on age or when last replaced. Time on the shelf may play a role if they have never been replaced.

@turgutnehat2915 5 месяцев назад

how it work on Vauxhall Insignia 2014 face i dont active re-learn mode pls somebody help me ?

@davidh9820 3 месяца назад

I just tried to relearn the tires after rotations. And for some reason when I get to the rear right tire it will not detect it and it times out on me the whole process. It’s crazy insane why this companies got to make that so difficult.

@meganbrown6695 15 дней назад

Have a question does it matter what sensors I get for this one to work ????

@rubbercheesereviews 15 дней назад

You need TPMS sensors compatible with the car; this device is compatible with the same sensors as the car. For my car, apparently AC Delco PN 13540602 is the OEM part number, but there are likely compatible aftermarket units. Try using RockAuto or similar to find compatible sensors.

@TheDomokosi Год назад

Hey guys, any idea why a 2017 GM Vauxhall Insignia doesn't go into service/learning mode? Holding the check mark don't do anything. Thanks

@rubbercheesereviews Год назад

To get into service mode, you first need to hold the start/stop button (without pressing on the brake) if you have keyless ignition.

@TheDomokosi Год назад

@@rubbercheesereviews Thanks for the reply. I did hold the start/stop button, instruments went live fine, but still couldn't put the car in learning mode by holding th check mark on stearing wheel. Will comment again when and if I succed.

@tamasgombkoto409 11 месяцев назад

@@TheDomokosiCould you solve it? I have the same car and same problem.

@Toobclip 2 года назад

Someone please help me. I bought one but it isn’t working. I have the same model of tool. My gauge just saying saying that my front left is low but it’s shows a reading that’s way off. But the tool WILL NOT WORK

@rubbercheesereviews 2 года назад

Is your gauge showing low, or a reading that's way off? If the car says the tire pressure is LO or "---" after previously working (i.e. if you didn't swap tires), that is an indication that the TPMS sensor has gone bad. With that said, if you know the TPMS sensor is good, try buying another tool - the first one I bought on Amazon was a dud and wouldnt work even though the indicator light made it look like it was working.

@vadim2800 Месяц назад

Thank you so much for the detailed video!MALIBU 2016!

@marcofaucher1918 3 месяца назад

you can do exactly the same thing with out this tool! just to deflate your tire until the horn beep! exactly the same result.

@michelmarquette8262 3 года назад

thanks! for my opel top !

@ALLI2010able Год назад

Hi dear, Could u please if know about Mercedes?? Thank u for channel

@knngame8652 4 месяца назад

Lo compré y parece q funciona esperemos haber si me vuelve a dar el error o no...

@TheLeonel94 День назад

This work on a 2017 impala ?

@rubbercheesereviews День назад

Yes, 99.9% sure it will!

@moreopiumplz 8 дней назад

Not applicable to the 2015 impala model.

@rubbercheesereviews 8 дней назад

This should work on 2014+ Impalas, I don't think any significant changes were made during the 2014-2020 body style

@HarteLaura-t4i 28 дней назад

Reed Throughway

@Bodybydubs 3 года назад

What if I have a bad one? My front right is bad it wot let me do the rest

@rubbercheesereviews 3 года назад

I haven't had a sensor die on me, but a quick search indicates that the system will not allow you to complete a re-learn with a bad sensor, unfortunately.

@MilagrosPrzybycien-y6f 26 дней назад

Wilson Shore

@rrfarfan 2 месяца назад

Thanks for the tutorial. It worked on my chevy trax 2019. I used the EL-50448 model

@rubbercheesereviews 15 дней назад

You're welcome, glad to hear it worked on your Trax!

@AliseGresham-b2o 22 дня назад

Senger Streets

@Alfredo-dh4vd 4 года назад

Thanks! I kept trying to do it on my 2018 impala while I had the car on and it wouldn't relearn :-/ now thanks to your video I got it now

@rubbercheesereviews 4 года назад

You're welcome, glad it helped!

@carolcalcagno2281 2 года назад

Will it work for a 2005 Chrysler crossfire

@rubbercheesereviews 2 года назад

No; a quick search suggests that you will need an "8821 Relearn magnet". Search for Chrysler Crossfire TPMS Relearn

@darrinfrench9018 4 месяца назад

can you set a specific pressure number? 40 psi is too high, like to drop it to 30 psi

@rubbercheesereviews 15 дней назад

These display the pressure. I think the car notifies you if it thinks pressures are too low (or too high?), but I don't think you can adjust those parameters

@sohailrashid8633 2 года назад

Hi I have one of these but my red light keeps flashing can u help pls

@FoodCritic-t6j 3 месяца назад

Great video, very helpful..!!!

@Ben-tr 8 месяцев назад

I wish there was a universal for different cars

@Jonwylietuba Месяц назад

Last one scared you lol

@rubbercheesereviews 15 дней назад

It did! Easy to stop paying attention, then the horn really gets you, especially when working in a garage!

@noetrejo1251 18 дней назад

Tengo uno de ese modelo. Solo le apretaba y no funcionaba asi. Hasta que vi tu video y ke deje apretado el boton. Este video me ayudó. Malibu 2015 I have one of that model. I just kept pushing it and it didn't work like that. Until I saw your video and I kept the button pressed. This video helped me. Malibu 2015

@rubbercheesereviews 15 дней назад

Glad to hear, I didn't realize at first that it had to be held either!

@noetrejo1251 15 дней назад

@@rubbercheesereviews ni yo sabía. Me puse a checar aquí en RU-vid y di con su vídeo. Ya estaba pensando en generar la devolución. Saludos de Reynosa MX

@kenpumphrey8384 2 года назад

Say the 20 bucks and just let air out around the car instead of using the tool.

@rubbercheesereviews 2 года назад

That is an acceptable way to do it on vehicles where it works... but not on many modern GM vehicles.

@rgl168 Год назад

I've seen some other people performed the relearn process by releasing air in the tires. Can you see if that works?

@rubbercheesereviews Год назад

I don't believe that process works on newer GM vehicles (it isn't mentioned in my 2019 Impala owners manual, but was detailed in my 2007 DTS owners manual). I'll try next time I have the air compressor out and post back.

@armandonavarro1459 5 месяцев назад

Totally worked. $9 on amazon.

@krisk1547 Год назад

Amazon sold it to me as universal tool even that it says gm on it.

@devanlabarre3543 6 месяцев назад

I don't think you actually need the tool. If you release about 5 psi, the sensor with transmit on its own. I mean if you don't want to let the air out of your tire, then yes the tool is very good. I bought one off Amazon and it does work nice.😊

@cesarqba 5 месяцев назад

Do you change the tire sensor ? I did you go straight with this machine ?

@rubbercheesereviews 5 месяцев назад

I swapped my winters tires with my summers. Each set of tires are on their own rims with TPMS sensors.

@wanjauBaron 6 месяцев назад

I paid $1.99 on ebay. Lol

@6hilltop6 7 месяцев назад

Touch the tip of the tool to the rubber of the tire where the sensor would be inside the tire

@rubbercheesereviews 7 месяцев назад

I've tried this and other strategies suggested in the comments of this video but never found a way that produced better results.

@kway313 5 месяцев назад

Thanks for helping 💯

@Greenkabin 2 года назад

That remote come in automatically compatible with gm vehicles?

@rubbercheesereviews 2 года назад

It is compatible with many modern GM vehicles. Product listing pages should show compatibility by model and year.

@T.Starks83 10 месяцев назад

Thanks worked perfectly

@mscott570 4 года назад

My 2019 GMC Terrain owners manual directed me to a GM tools website to purchase a device that costs $300.00😂. Not happening!! Purchasing one of these ASAP. Thanks👍

@rubbercheesereviews 4 года назад

You're welcome - much cheaper!!

@jeanettelewis4457 11 месяцев назад

Thank you so much for the detailed video!

@biondatiziana 2 года назад

Thanks for the clear video -- very helpful. I bought a similar-looking tool but it came with no instructions whatsoever.

@rubbercheesereviews 2 года назад

You're welcome, glad it helped!

@fernandohood5542 4 месяца назад

GM Engineers are smart.

@Whereisgod666 Год назад

Thanks for the tip about keep pushing the button!

@ianstewartorr8455 Год назад

Greetings from Scotland thanks 🇬🇧🇬🇧🇬🇧

@rubbercheesereviews Год назад

You are very welcome!

@buddy1976 23 часа назад

Dude you talked 3 minutes... it only takes bout 30 seconds for whole process 😂😂😂

@martinfowler6906 5 месяцев назад

Thanks!

@merrinomay7986 Год назад

I got a similar device. My 2010 Toyota Prius is showing a no communication with one of the TPS. Can I use this device to know which one?

@rubbercheesereviews Год назад

These are manufacturer-specific. If you have one that works with Toyota (and not this one), you can probably tell by doing a re-learn and noting when the car stops responding (GM beeps the horn after each successful tire, I assume other brands do similar).

@merrinomay7986 Год назад

@@rubbercheesereviews I will try if it works that way. By the way, how do you like your Impala? It has a sharp looking interior.

@rubbercheesereviews Год назад

@@merrinomay7986 Sounds good! I really like the Impala - plenty of space, good compromise between handling/performance and comfort, and good value compared to similarly-sized cars.

@merrinomay7986 Год назад

@@rubbercheesereviews 1.5 turbo? peppy?

@rubbercheesereviews Год назад

@@merrinomay7986 I think you are thinking of Malibu. Impala is either 2.5 or 3.6. I have the 3.6L - really peppy and fun to drive, and reasonably good gas mileage (I average 32MPG on longer trips)

@flexlocovasquez852 8 месяцев назад

Does the vehicle need to be on or off

@rubbercheesereviews 8 месяцев назад

Leave the engine off. Someone commented on here that the process didn't work (or didn't work reliably) with engine running

@teresadamon4277 Год назад

Thank you so much for posting this video. Saved me a ton of money.

@rubbercheesereviews Год назад

You're welcome, very glad to hear!!

@m-jab999 Год назад

God bless your soul 🙏

@الشمري-ز3ج 3 года назад

My car is tahoe 2007 good or not fat ...,

@rubbercheesereviews 3 года назад

I believe for that generation of GM, no tool is required. There should be a way to get into re-learn mode, then you can go around releasing pressure tire-by-tire. Take a look at your owner's manual.

@mendoza5569 3 года назад

Tools world for Nissan

@SPNCRYS 5 месяцев назад

Thanks for the video, anyone now if this tool works for a 2016, Chrysler 200?

@rubbercheesereviews 5 месяцев назад

This particular model likely won't, but there are others that are advertised to work with Chrysler. U508 is a model suggested when I did a search, though I haven't tried one.

@TavonEMasonSr 2 года назад

It picked up my front left but not the others

@rubbercheesereviews 2 года назад

That is annoying... how old are the sensors in the tires?

@TavonEMasonSr 2 года назад

@@rubbercheesereviews thanks for getting back to me. My car is a 2018 impalal. Crazy thing is I re did it and it picked up my front left and rears but would not pick up my front right

@rubbercheesereviews 2 года назад

I'm surprised with the car that new. I would try again a couple times - occasionally it will take a LONG time of holding to get a connection. I'm not 100% sure if these are accurate, but I found the following suggestions when I previously had issues (at that time I had a dud TPMS programmer) : 1) before programming, drive the car. 2) ensure front wheels are straight.

@TavonEMasonSr 2 года назад

@@rubbercheesereviews ok thank you I'll do that

@WhittierElliot-f3b День назад

Moore Kevin Brown Thomas Williams Ruth

@victormanuel-uk8hl 2 года назад

having a home designated for the tool helps ,if you replace the item back where it belongs.

@rubbercheesereviews 2 года назад

For sure - I also remove the battery between uses, but have a dedicated "TPMS sensor" battery kept in the box.

@CatherinLaporte-t8r 15 дней назад

Thompson John Hernandez Cynthia Walker Ruth

@roddycreswell8613 9 месяцев назад

Get on with it already

@USA-GreedyMenOfNoIntegrity 7 месяцев назад

Let me give you a piece of advice…go up there to that little gear and then to playback speed and turn it on 2X. That should satisfy your impatience.

@roddycreswell8613 7 месяцев назад

@@USA-GreedyMenOfNoIntegrity let me give you a piece of advice, Get a life.

@elizabethmartinez1490 6 месяцев назад

@@roddycreswell8613says the person acting like a child💀

@roddycreswell8613 6 месяцев назад

Who cares what ypu think? Get on with it already.@elizabethmartinez1490

@kielfeschuk4790 3 месяца назад

You wanna meet god little dude???

@pv510 3 года назад

Did you buy oem tpms sensors?

@rubbercheesereviews 3 года назад

They are OEM TPMS sensors - the rims/tires shown in the video are what came on the car from factory. My snow tires (not shown) are mounted on take-off rims from a 2015 Impala LT which also have OEM sensors.

@rabbit73au 4 года назад

You are holding it wrong you have to rest the black antenna against the tyre it will work quicker

@rubbercheesereviews 4 года назад

Thanks for your comment - I tried that way the previous time I swapped tires (the instructions recommend either holding the tool perpendicular to the valve stem, or parallel to it with the antenna against the sidewall like you suggest), but I didn't notice any real difference. I'll try next again next swap and update this video if required.

@rabbit73au 4 года назад

I tried it the way you showed when I got mine and it took longer than holding the top against the sidewall

@rubbercheesereviews 2 года назад

@@rabbit73au I've tried holding my tool a few different ways after reading your comment (and others) - it really doesn't make much difference how I hold it.