REACTIONS TO MY TANDEM AXLE TRUCK FINALLY SHREDDING TIRES! 900HP SUPERCHARGED CHEVROLET C10 SLAYER 

How long will the tires last??? Curious if anyone can guess!

At the start of this video my first guess was driveline angles. As a professional truck mechanic I have seen this type of problem before. I also notice whoever built the front diff, put the output on the same plain as the input. If you look at a heavy truck axle, you will see that the input is on the bottom of the crown and the out put is on the top. This is done (as far as I learned) to minimize harmonic vibration and runout on the forward crown and pinion. If you end up developing problems as the parts wear, this could become an issue imo. Cool truck.

We need to see it at the Freedom Factory. Gotta happen

The biggest round of congratulations and applause goes to dad. You have done the most awesome thing by being the best dad by including your son in positive hobbies. He's not doing drugs or alcohol. He's not out robbing banks or stores. He's not out raping. You've taken him under your wing and nurtured his interests and skills, where the two of you have worked side by side on projects until this "masterpiece" of vision, was put together. I enjoy your videos. Just remember. Rome wasn't built in a day. And Edison didn't succeed the first 2000 times. He found 2000 days that didn't work. Keep trying. Best wishes in your continuing success. The truck is AWESOME!!

I am so jealous of you guys! What a great father son relationship. I hope you really appreciate that brother

That thing is epic and badass in every way, across all metrics, in every dimension. It makes me want it. It's an inspirational work of art.

This has to be one of the coolest trucks ever. You guys did an amazing job.

The best part is that you get to work with your dad so many people wish they could have that bond especially when you get to do with cars.

Love seeing a father/son project like this. Great stuff

Your high's and Low's are what we're here for and we can learn how to build cool stuff and if I'm being honest I'm here cause you and your dad make me laugh my ass off

Keep at it. You'll figure out why it's wheel hopping. Love watching you and your dad. I'd love to see a new season of spooling up. Have a great day guys.

after so much heartache, to see it in the last couple of minutes of the video!!! this is amazing!

What about a "sway bar" on each side connecting the two axles. As one pushes up the other would be pushing it back down. Forcing both to stay planted. (Still watching vid)

Literally the “ sickest shit “ I’ve ever seen with an old school gm truck. Keep progressing with your endeavor. BAD @SS. 100+ impressed. Don’t stop with your progress

Found this channel by watching Cletus and I’m Super pumped.

Been waiting months to see the c10 finished. Congratulations

I shed a tear for the "high five" with dad. Awesome truck aside,overcoming those problems after problems. Priceless

Never stop learning that's how you get better. You guys are awesome already

I just stopped the video to say ,THATS THE SICKEST TRUCK EVER GUYS,burnout or no burnout. Hands down ,yall built the no.1 truck!!!!!!!. So yall just pat each other on the back n I'm gonna finish watching the now

HUGE CONGRATZ!!! Its awesome to see how happy you guys got. Keep up the amazing work and content.

Congratulations guys!! So happy for you. I know you have worked your hearts out on the truck. Brad, you about had me in tears lol. Even though Mama wasn’t impressed much lol. Thanks for sharing!!

Bro you have the coolest Dad! Awesome father and son team

this is the best looking 6-wheeled car/truck i have seen.

SUCCESS!!! You guys are RAD! hey though seriously, what it really comes down to is not trashing this one of a kind build with non stop burnouts (although Very Cool). It's something you both built together, and enjoyed the time spent together figuring it out. I sure miss the GOOD times I had with my pop anytime we worked on projects together. watching you guys brings it all back.

just me and the boys slaying some tires. Congrats fellas

Siiicckkk!!!!! Congrats on the build! Super rad

Congrats!!! Pop's expression says it all. Journey well done

I came from Ol Cleeter’s channel because he mentions you so much. How have I never watched your channel dude. That truck is amazing and I can’t wait to see what it does.

Hell yeah! If building these trucks was easy, everyone would have one! Stoked to see you guys got the issues worked out. I guess it's time to line the trucks up now, right? lol

Hell if you get a Pennie's worth of enjoyment off each smile that beautiful ride puts on people's faces ....your already rolling in millions brother !🤯

Bro' that was an emotional rollercoaster .... SUBSCRIBED !

I wish I had the same relationship with my dad. No matter how hard I try I always fall short in his eyes.

Man your dad's just too wholesome

Fail or not this was a great video. From the throwback to the trans work it was great and a perfect balance of tech vs show. GG for nailing it in the end.

Congratulations awesome to see your dad so pumped

Congrats to you and your pops !! Your perseverance and drive is second to none 👊🏻 💨💨💨💨💨💨💨💨💨💨💨💨💨💨💨💨

Your Mom was the best! She could just pick up on the vibe, Haha she could see her hubby was annoyed, so thats what she said, "annoying". Then she was like, "isn't no wheel hop a good thing?" Indeed, but when the fix is so simple, we get irritated at ourselves for missing it. Plus not being able to use those custom wheels... 😒

Makes me SO happy to know you're able to roast some tires. What would life be without some righteous tire roastin'?

Check the backlash in the transfer drive line and the two diffs. The spring back along with tire expansion from what I saw in the slow-mo shot is what's causing some of the modulation. Go with the tightest tolerance that's safe. Remember the metal will get hot and expand too... Hope it helps. You might also try moving the rear axels a bit further apart by 2".

Today woulda been my dads 70’th birthday I would give anything to be able to build my Datsun with him and see that smile like your dad had jumping outta that drivers seat!, you guys rock!,,

So Bad Ass! I have I love this build from the beginning. So glad that you guys are figuring it out. It just gets better with time fine wine.

A Lovely relationship between you guys!! dads and boys rock!

I love how you guys go into problem solving right away , great team work !. Love your content dude keep up the good work!!!

You two are hilarious. I’m so glad you finally worked out the problem. It was bummin me out watching your disappointed face cause your usually such a happy guy. Can’t wait for the next video. Stay safe and keep racing.

Good Build, Thanks For Sharing.

Cheer up bud. You're doing better than MOST and you and your dad are rocking it together. Step by step.

50-50, nah more like 75-25, to the good side. That's a bad ass truck and I think it's probably in the top 2 builds I've seen so far. Excellent 👍

You guys are nuts! That truck is incredible!

I think pops nailed it 👍🏾👍🏾😂 it was the law of physics.

Congratulations, We new it would happen. I've watched all your videos. Great work.

That is AWESOME! Great job tuning.

".... I get to do it with you." That is worth it all.

New guy here. Awesome, honest content! Just like real life! I saw a comment re bringing this to the FREEDOM FACTORY. 3 MILLION VIEWS IN ONE DAY!!!!! GOT TO DO IT¡!!!!!!!!!! LUV THE TRUCK, 👍

The coolest part about all of this is the amazing relationship between u n pops!! That’s the absolute best thing about all of it. N then it’s that bad ass truck!! #subbed

Wow, so happy for you guys, persistence pays off, congratulations

Respect for that remote tune.

Bad ass truck in the world. Y’all killed it!

Love your dad's energy keep it up

GOD that was a satisfying watch!!! Congrats!!!!! 😁

Congrats on finally getting your incredible truck build dialed in!!

Glad i watched to the end. had me thinking, so many variables with tandem axle. Then the old boy has a eureka moment. honestly awesome when that happens. first time watching these vids/build, keep up the good work.

This channel needs 10 million subscribers... 💣💣💣💣

Congratulations guys on sorting the problem out we knew you could do it. Now it's time for a lot of fun in the truck great 👍 video 👍 📹 keep them coming.

As I was sitting here watching this video I kept saying, "change the pinion angle", you finally heard me! Lol! I'm glad you got it figured out. Sometimes problems just seem to persist, you just have to persist longer.

I’m so stoked for you guys Brad you look so dejected at the end man I feel for you brother but the old man’s a friggin genius you could see the gears turning Something so simple that things a beast can’t wait to see the next video congrats guys

Bad ass. Respect to both of you

THAT TRUCK IS SICK!!!

Gosh I hope my son and I are like you guys! You super made my day thx soooo much for the awesome stuff 👏👏👏👏

You need to bring that to the Australian summer Nats where you will be welcomed yet blown away by what Aussies can do with their daily drivers

The hoonigan guys would love this.

Great team work. 👏 You created a monster and i can see a lot coming...... Much love for your creativity guys. A monster truck is born

I built one almost exactly like this 8 years ago. Great job. Have fun I love mine.

New to the channel just seen the truck for the 1st time today that truck is so sick and u should be proud of the 1 off piece u have it’s awesome thanks for sharing it with us

FREAKING LOVE IT !!!!

Your putting in the wrench time ,and it's paying off ,you guys got it to do a burnie[PROGRESS] love the biuld!

Congrats on the fix fellas!

When all came through, it gave me goosebumps 😂 just came across the channel, and I dig the content 💪🏽

Awesome work!!!

Keep going!!! You'll figure it out!!!

Congratulations Turbo and Turbo JNR what an awesome father son team!!!

Hell yeah. I had faith you guys would get it fixed. Nice job

I love the genuine reaction from pops!

Appreciate the realness & kudos fellas, hard work, passion & dedication pays off.. So good ahaha, pops be hype! Good vibes, stay safe. Salute

Word to your Pops! WOOOOO!!!

I felt that when the dad said " I get to do it with you "

Dam that’s another cool truck in the making.

The most baddass truck in the world!! I can't wait to see the next episode🔥🔥🔥

I'm not sure who was the happiest, Brad or his Dad! The pure joy on his Dad's face was awesome to watch.

“Yeah I saw that in the 3 emails you sent me”…. Lol 😂 sounds like something I would say

going from start to finish just tuning out the little details is awesome

Dope as heck. I'm not even a car dude, but instant subscribed.

So happy for you guys to get the wheel chatter fixed. I hope to see you guys in person. Have fun!Woohoo!

I totally Dig Your Rig Brotha. That is awesome

That’s a mean truck , I love how amped up dad was sorting it out 🤣 cool 👍

It's beautiful bro. Keep making fun changes

What doesn't kill you makes you stronger 💪💪💪💪💪💪💪 maybe some support in the middle for the axle shaft inside the tube on center for both

White faced wheels with black tubs and a black truck would be sickk

I absolutely love trucks! This one is awesome

That’s awesome!! And can’t wait to see the smoke show! Congrats on finally being able to roast rubber!

I think its amazing the time you get to spend with your Dad will the best thing about this amazing build Best results are enjoyed