Rear Brake Pads and Rotors Replacement on Range Rover L405 and Sport L494 in Step by Step Guide

Подписаться 9 тыс.

Просмотров 95 тыс.

50% 1

Hi! This is a step by step guide on how to replace rear brake pads and rotors (discs) on 2013-2021 Range Rover L405 and Range Rover Sport L494
Looking for a European car specialist in Southern California? I can help!
Click the link below to get a quote now!👇
app.shopmonkey...
Instagram:
/ alex.fixty
Torque specs for wheel bolts - 103 ft-lbs
Front Brake Pads and Rotors replacement:
• Front Brake Pads and R...
Parts and tools:
CALIPER REWIND TOOL:
amzn.to/3UQfuX5
OEM GENUINE REAR BRAKE PAD SET:
amzn.to/3eFLARW
GENUINE LAND ROVER REAR BRAKE PAD SENSOR:
amzn.to/2R2LqvR
TRW PRO REAR BRAKE PADS:
amzn.to/3nnvbam
REAR BRAKE PAD WEAR SENSOR:
amzn.to/3HAnVlk
REAR OE ROTORS:
amzn.to/3TLA7oK
The tools you need:
CAR JACK
BRAKE CALIPER REWIND TOOL
HAMMER
SCREWDRIVER or PICK TOOL
3/8in SOCKET WRENCH
1/2in BREAKER BAR
15mm WRENCH
PICK TOOL
METAL BRUSH
13mm T50 3/8in SOCKETS
22mm 1/2in SOCKETS
JACK STANDS
BRAKE CLEANER
BRAKE & CALIPER GREASE
Any help would be greatly appreciated🙏 www.paypal.com...
Disclaimer:
Due to factors beyond the control of Land Rover Tech, I cannot guarantee against improper use or unauthorized modifications of this information. Land Rover Tech assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Land Rover Tech recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Land Rover Tech, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Land Rover Tech.
#landrover #rangerover #l405 #L494

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 141

@Alexfixty 3 месяца назад

Hi! I provide mobile car repairs for European vehicles in Southern California. Request a quote here👇 app.shopmonkey.io/quote-request/e4c56803325fda668f1050eca12fba84?noExternalScripts=1

@highendtrends3508 17 дней назад

We need more RU-vidrs like this guy. Clear and to the point. All of his videos are class!

@Alexfixty 16 дней назад

✊✊✊

@the5nope 10 месяцев назад

I was scared to do this but now I am not. Alex you're a lifesaver and we appreciate your channel. Guys/Gals don't be scared to donate to this fella and subscribe.

@culpyy Год назад

I hope my comments will prevent anyone else from making my mistake. The only thing I believe I did differently from your video was I couldn't enter maintenance mode. Therefore, I started the car and had it running to disengage the e brake. This allowed me to remove the caliper, but I couldn't compress the brake piston. A costly mistake. Thank you again for the video. Keep up the great work.

@Alexfixty Год назад

Sorry to hear that!

@rhkavli Год назад

I have one comment regarding the lubrication of the clips. The grease goes on between the carrier and the clip. The purpose of the grease is not to minimise friction between the brakepad and the clip, but to prevent rust from forming behind the clip. Rust has a bigger volume than iron, so if rust forms, it will squeeze the clip towards the pad and make it bind up. Here in Sweden, with salty roads, I see this happen all the time.

@davidwynne3289 6 месяцев назад

Excellent, informative video. 👍

@RachelVargaOfficial Месяц назад

Doing my own brakes and rotors next time! I love the extended mode on these cars for getting underneath without a Jack. The time it takes me to get to the shop, chat, get back to where I need to go, then go pick it up, chat and carry on adds up! Saving time and money is huge!

@archiesmith7945 8 месяцев назад

One thing you should add in your videos... torque specs whenever you tighten a bolt! For those of us wanting to stick with the manufacturing recommendations... thx

@Alexfixty 8 месяцев назад

💯

@groovyy_bastardd Год назад

My brother, you're doing God's work!!!👌🏾✊🏾🙌🏾 You've saved me $100's ! I appreciate the tutorial!

@Alexfixty Год назад

🖖🖖🖖

@curtissharris8914 7 месяцев назад

There is no such thing as simply disconnect the brake sensor at the chasis im finding out. I cut the tab off the middle sensor so I could access it enough to pull the tab up to disconnect the sensor wire there. Otherwise rear brakes r easy. Turing the brake on and off was diff. Finally found someone online who described it so it worked.

@xder345 2 года назад

You are a legend my friend. The caliper piston recompression had me the most worried, but it seems to be straight compression, no screw winding needed. Already have the tools so I'm good to go. Thanks so much.

@chrisowen2763 Год назад

Thanks! Super useful. This is the same procedure on Discovery 5.

@Alexfixty Год назад

🙏

@Pri83 2 года назад

I want to change my Velar rear breaks. Your video helped me a lot. Cheers.

@lolorenzo3762 2 года назад

Are they exactly the same?

@JohnDoe-pc5fq Год назад

Replace the plastic cap lug nuts. Took me 20 minutes to do the brakes front and back. Took me two hours and four different sockets to get the Lugnuts off. One piece steel ones on Amazon for 39.99

@startingtech3900 11 месяцев назад

ALEX THA GOAT SHOWING THIS! my guy just got it buttoned up! Everything smooth brand new ceramic pads and rotors for 350$ x4

@Alexfixty 11 месяцев назад

Nice!

@startingtech3900 11 месяцев назад

@@Alexfixty alex where is go fund me for your new l405 rover so you can make more RR videos bro

@Alexfixty 11 месяцев назад

Here Fixty.com 😂

@gerrygrehan4257 2 года назад

Hi Alex thank you very much for your videos. Today I replaced my break pads on the rear of my Range Rover L405. Without your help I would have gone and paid a lot of money to land Rover. Keep up the good work. !!!

@chrishogan1799 3 года назад

Great job Alex. Your videos are very informative. In addition to changing the brakes, I'm about to flush the differentials, transfer case, and the ZF transmission on my 2015 RR Sport if you're looking for new DIY content to help others like me.

@Alexfixty 3 года назад

Thank you! Will do someday!

@2620patrol 4 месяца назад

Thank you for the great information. I ll do my car tomorrow

@Alexfixty 4 месяца назад

Glad it helped

@jeffhughes9169 23 дня назад

Very good video from master tiger Thompson Taekwondo Las vegas

@alexandraava3034 6 месяцев назад

Time and money safer Thank You

@usmanrazzaq242 2 года назад

I have 2017 range rover sport, I tried to put into service mode, it doesn't go, please advise. Thank you

@dsmubz 4 месяца назад

Very well explained, thank you.

@Alexfixty 3 месяца назад

Glad it was helpful!

@rightorwrong8951 Год назад

Remember to properly hang the caliper so that the rubber brake hose won't mess up.

@Alexfixty Год назад

💯

@tiffanygentry6004 11 месяцев назад

@rightorwrong8951 Can You explain further! you got me thinking like damn did I hang it right?? -Jay Howard But Thank you Alex Your a Life saver bro literally saved me $2000 knew they was trynna play me when they said $770 for the just the rear pads and $790 for the the front. Your the GOAT!!

@vinhha6073 Год назад

god you save my life bro..👍👍👍

@sergeibzk 9 месяцев назад

Thanks a lot for that video, very informative. Doing this now in the car shop Looks like you're from Russia 😂

@unprofessionalmechanic8466 25 дней назад

Hi Alex, how do you know if you have Continously Varriable Struts or not? Thanks you. 2016 RR 5.0 SC

@jonathanalexander5405 2 месяца назад

well in thank you for this 🍻

@Alexfixty 2 месяца назад

🤙🤙🤙

@pinkelephantllc3800 2 года назад

awesome job Alex. very helpful. thank you!

@conradlemon1781 3 года назад

You're awesome, Lemon thanks you. I watch everything you make))) Cheers.

@Alexfixty 3 года назад

Thank you 🙏🙏🙏

@eastwood978 2 года назад

You should invest in a torque wrench. Why did you not grease the guide pins?

@afshinazadeh2034 3 года назад

Is this the same procedure in putting a Range Rover Velar parking brake into MAINTENANCE Mode?

@ryansingh5939 2 года назад

Big help thanks.

@dustinolson7859 Год назад

To compress the piston could you not just use a c clamp?

@jcurtis319barrenhill 7 месяцев назад

Do you normally grease the caliper slide pin inside the one with the rubber accordian - the one you take off with the 13 and 17 mm

@raptorraptor9608 Год назад

Mulțumim !sfaturi foarte utile😊

@Alexfixty Год назад

🙌🙌🙌

@creavonegarrett8871 2 года назад

Can't get that caliber to retract back.... even in maintenance mode.....??? I wonder what I'm missing here

@startingtech3900 11 месяцев назад

Same what was your fix?

@Mgh101590 2 года назад

How do you put a 2018 Velar into electric power brake maintenance mode this mode here did not work for my velar? Does anyone know?

@nicholasbryant4652 2 года назад

We’re you able to find out how to do this

@jackhuang1434 Год назад

Very helpful my friend.

@Ribvaren Год назад

Txs. Great video 👌

@markoradovanovic7255 Год назад

My range rover 2016 have brake fault and I find out my rear right caliper is stuck I change put new bu how I reset this brake fault thank you

@danielcampos2470 2 года назад

Gracias

@leonoudewesselink 2 года назад

Love your video's! Do you have : how to change the rear hub - bearing ?

@sistercalhoun4444 8 месяцев назад

The way you put the car in Brake Service Mode does it work for a 2017 Range Rover Evoque HSE ?.......... And when you put the car in brake service mode can you turn the car off or do you have to leave it in accessory on ?

@georgesolomon5696 3 года назад

Great video!.. Are you going to do a video for the front? Thanks

@Alexfixty 3 года назад

Here is the front ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PKHBBKWR3As.html

@user-zz5ds2fs4w 2 года назад

احسنت عمل رائع ومعلومات جييده شكرأ

@vymerrem6268 3 года назад

Здорово! Очень аккуратно и грамотно

@startingtech3900 11 месяцев назад

Alex my rear piston is solid as a mofo. It’s stuck won’t compress what do I do

@startingtech3900 11 месяцев назад

FOR ALL THOSE WONDERING DO WHAT ALEX SAID PUT IN SERVICE MODE IN BEGINNING

@unprofessionalmechanic8466 21 день назад

Hi Alex, I have a question for you... I just tried replacing rear brakes on my 2016 RR, used that tool to retrieve the caliper piston and.... could not fit new pads on to new rotor. Do you have an idea why this may be happening? Do I need to screw the piston in and push it in? Thank you.

@jcdentonunatco День назад

You likely havnt pushed the piston back far enough. I recommend the tool he uses in the video, and putting the vehicle in brake maintenance mode BEFORE you remove the caliper. Doing it after can result in popping the piston right out of the socket which can turn the job into a real mess, brake fluid leaking everywhere.

@SGDetailing 9 месяцев назад

Will it be same for range rover vogue SE ?

@prasannadias5281 2 года назад

Good job

@Alexfixty 2 года назад

Thanks

@nawafhamza6346 3 года назад

Thank you it's great job I changed my barke bad last month and I did not do service mood shall I do it?

@Alexfixty 3 года назад

Hi! Most likely it's been adjusted automatically.. But you can do it just in case👌

@lorphelin1044 2 года назад

Thanks Boss

@davidwynne3289 6 месяцев назад

Excellent video mate! 😊

@Alexfixty 6 месяцев назад

Thanks a lot!

@vinnyveezy 2 года назад

A thanks for sharing saved Me some money

@marcoperez6952 2 года назад

Is it just compressing the brake piston or must you engage the cutouts on the piston and then turn and compress. It also looks as if you are turning piston to the left instead of right. On my 2016..you have to turn piston to right to compress it....Very unclear.

@ChicoDeon 10 месяцев назад

Awesome Video Thank You for sharing this Great information

@Alexfixty 10 месяцев назад

✊

@keiyshaw 3 месяца назад

What about the brake sensors?

@Alexfixty 3 месяца назад

Replace them

@publicname515 Год назад

Should you replace the bolts or use thread-lock blue? Which is better?

@user-zz5ds2fs4w 2 года назад

شكرأ الك هل جميع السيارات هي نفس الطريقه ارجو الرد صديقي

@stevenjoseph5736 3 года назад

Hey can you do a belt replacement video? getting a L560, just curious if its an easy enough home job. Thanks in advance.

@user-bj4cm5wp6d 3 года назад

I have benefited from this wonderful

@jean-claudebalics5272 Год назад

would this apply to a 2013 LR4?

@Alexfixty Год назад

Not sure tbh 😕

@mvirdi2333 3 года назад

Hi. Do we need new brake sensor every time change new brake pads. Thanks

@Alexfixty 3 года назад

Hi! If the sensor is good and there is no brake light on dashboard, no need to replace it

@ghettotroof 2 года назад

YO broski thank you so much. im broke with an LR4, saved me tons of $$$ doing transmission anytime soon? lmao

@thamsanqankomo9387 2 года назад

great man thank you

@Unclesam-p3o 3 года назад

Hi sir after brake job my front brake make clunk noise when hit the brake hard

@krisztian007 2 года назад

Love your videos... Well done!

@user-tu4vy3vs3h Год назад

is this the same procedure for a 20' velar?

@Alexfixty Год назад

Not sure

@cryptoearn7071 2 года назад

Great Content.

@SGDetailing 9 месяцев назад

Good one bro

@marcoperez6952 2 года назад

Is it really necessary to put the car in maintenance mode to do rear brake pads? You also forgot to mention you need a special brake caliper piston retracting tool. And you need to get the right retracting pad to fit the brake piston otherwise you are wasting your time doing the job!!

@Alexfixty 2 года назад

0.40

@marcoperez6952 2 года назад

Missed that part on tool..sorry. But still puzzled why the parking brake must be put into maintenance mode. I have never used the PB. So it probably is not engaged and already retracted...correct?

@price9195 2 года назад

@@marcoperez6952 The parking brake comes on every time the car is turned off. It retracts but not all the way each time you drive. The new pads will be thicker than worn ones and they won't fit o/w.

@SkynetTeamDREADWING 8 дней назад

Dude the bolts holding the caliper bracket broke

@dkautollc 3 года назад

Your the best 👌🏾👌🏾👌🏾

@garnetwillis4623 3 года назад

How to reset your engine light on your Land Rover

@amandro0074 10 месяцев назад

I don’t think 2013 RR sport has service mode

@toyotaman29 3 года назад

Nice vid... good job

@obedchux987 3 года назад

Good Day! Pls I loosed and removed the two back brake callipers to compress them as the new pads wasn't entering, after fixing them back and bleeding, the brake pedal goes flat at first and comes a bit hard after several pumping but still goes flat when left for few minutes, had tried several means of bleeding, even changed the brake master and ABS Module but still having same brake failure. Kindly help urgently. Sorry it's a Range Rover 2014 Autobiography and all the jobs where done without me activating the maintenance service mode or can it be the cause?

@jcdentonunatco День назад

Bleeding the brakes can be very tricky without proper equipment. Highly recommend letting a shop do the bleeding process unless you have all the equipment

@austinlopez6309 Год назад

Do you have to replace the sensor when putting new pads in or can you use the old one?

@Alexfixty Год назад

If it’s not damaged you can leave the old one

@mrkushykush1 2 года назад

is bleeding the breaks required?

@culpyy Год назад

Hey Alex. One more question if you don't mind. I received my new caliper. I'm reinstalling the old motor for the e-brake on the new caliper. The motor is currently unplugged and on the bench. The car is currently in maintenance mode. Is the e-brake motor required to be reset into a maintenance mode position before installing it on the new caliper? Currently, I don't know what position the motor is in. If so, do you have a recommendation? Thanks in advance!

@Alexfixty Год назад

When you set it into maintenance mode you can hear how the they unwind into 0 position. Not sure if you need to do something with it.

@culpyy Год назад

@@Alexfixty I understand. Thanks again Alex.

@1985Abimael 3 года назад

Do you always have to replace rotors when replacing the pads? My brake light won’t go off ... any advice?

@rhkavli Год назад

No. But if you replace the rotors, always use new pads with them. Rotor replacement is done if they are severely blue, due to a binding caliper, severe rust, grooves in the surface, or minimum thickness being reached. Then both sides on the same "axle" should be replaced, regardless of the condition on the other side. This is to maintain a good brake balance. If the warning indicator for brake pad wear is lit, you have either consumed the wear sensor, so it has to be replaced, or you have a break in the sensing circuit.

@georgesolomon5696 3 года назад

Hello, when changes front/rear pads and rotors is there a need to do a break? Thanks

@Alexfixty 3 года назад

After you replaced brake pads, pump the brake pedal till it gets hard

@leetaylor1300 Год назад

Can you post a link to the caliper rewind tool you used?

@Alexfixty Год назад

amzn.to/3UQfuX5

@contrac4u Год назад

on some RR you can also use a diagnostic tool or code tool to electronically retract the piston...

@denallizx10 3 года назад

Awesome video...where are you purchasing the pads rotors and sensors?

@freddygarrett 3 года назад

Thanks I went to the dealership they told me 1,400 for the front an 1,200 for rear I was like what that crazy ordered all from rock 🪨 auto rotors and pads 300

@freddygarrett 3 года назад

New oner of a L405 anything’s should look out for

@denallizx10 3 года назад

@@freddygarrett nothing I've experienced so far...just brakes..what brand did you order from rockauto...and were you able to order the sensors as well?

@freddygarrett 3 года назад

Bendix brand rotors an pads ,, .an Yes brake pad sensor

@Alexfixty 3 года назад

It depends, sometimes from local warehouse, sometimes eBay or Amazon. Usually I look everywhere even call dealers :)