Rear Bumper and Low CG Tire Carrier from MetalCloak Install - DO IT YOURSELF! 

This is my favorite jeep upgrade series! Thank you for sharing all your fun and hard work.

I just want to say that you make the most entertaining videos. Ive watched this video ten times along with all your other videos, and it is still awesome to watch. Great job!!!

I am totally following your vids on your build!! I just bought my 2016 Jeep Wrangler Rubicon this past June and I am loving it!! Saving up for some mods!!

wow, that was super easy. Talk about a well engineered product! Putting on my XJ bumper from another company was a huge pain, partially because it was one piece, and partially because it was HEAVY. That multi piece strategy is the way to go!

I just replaced my wrecked 2012 Wrangler Unlimited Sport with a 2012 Unlimited Rubicon. I'm watching your build closely so I can follow your lead. Thanks for the videos!

The jeep is really starting to come together. Looking good.

Can't wait to see the high lift and gas can!!! Been looking for hours online for a good bumper that holders all 3 things I need!! I think I found it ! Thanks

Looks like a super smooth install and looks tough. Since watching these I am looking for a early 90's jeep. Hard to come by ones with little to no rust in the Ohio Michigan area.

Enjoying the videos Jason..!! Please keep them coming..! 😎.

Lol i felt your joy dude when the tire carrier locked smooth 🤣🤣 i use my floor jack like that too! 🤜🤛🙌✌️

Great video! Love watching the evolution of your Jeep. It is giving me ideas for mine. Thanks!

Such a great looking bumper and I love that the install is flipflop rated!!

Love your videos!!!!!! I always end up watching them out of order but thats ok!!!! i just love how you do everything out of your garage. I am super jealous that there is no rust at all, Im from Ohio haha.

Great upgrade! These vids will help a lot of people.

Such a badass build!!!! Love your vids, keep em coming

love the content!!! ugh i binge watched all your vids & now i want more!! love the jeep

That looks sweet and heavy duty without being a boat anchor low profile too

Love the Videos Man! I cant wait to see you install the lift kit. Its always a great day when I get a notification that you posted a video!

Love the videos! If you're thinking about lifting it anymore, I suggest the 4" EVO enforcer. I have heard nothing but good things about it and I would love to see an install video of it!

I just have to say, the camera work on this video was amazing. Well done!

Thanks for the videos man. I have the same rig, just a 2011. Gives me inspiration for what I'm going to do next for mine! Stay safe with those fires out there!

You are too good with these videos. Great work!

This is very cool I enjoyed watching! Thanks for share it with us ... I got a 91' Jeep Wrangler and i am catching good ideas from you to make my Jeep a bad ass as yours hehe...

Thanks for another great vid! I'm also in So cal and have been experiencing those crazy orange skies! Still have my stock 2016 JKU rubicon. Writing down my list!

Min 10:45 that face tho! Haha I've watched this video more than 3 times and it never gets old your reaction 🤣

This video was so satisfying to watch

Awesome video again. Keep up the amazing build

Thanks for making these vids! Love seeing an epic jeep build on RU-vid

Gave an actual thumbs up when you showed the cleaned up bumper support. I can't stand tutorials that show new parts being installed on a dirty part of a car!

Great video of the installation, you make it look so easy that I may have to do the same setup! Jeep looks awesome.

love your video! I believe this is the rear bumper and tire carrier i am looking for.

Thanks for the video I have been looking for a good bumper for my ramcharger build starting looking in to keep bumpers after this video I can see that with some modifications I can mount this bumper on my ramcharger

I love the new bumper Jason. I really does look Bad Ass! And I also love the Roadkill General Mayhem sticker too, lol. I hope the fires don't come any closer dude. Good Luck. -Drew

Another awesome install video! I may actually replace my Poison Spyder bumper with this one.

Man oh man have I been waiting for an update video

Great video once again! Good luck with the fire situation. Hope your house nor your neighbours gets damaged. Be safe.

Jeep is turning out nice

Nice man my wife and I bought a 2016 Acura ILX about a two years ago. She wants to get rid of it for a JK Jeep but i would hate to see the Acura go but man are the JKs nice man.

Every video I love this jeep more and more!

Bro you are awesome with the step buy step . I’m buying metalcloak just like you

Loved the way you casually filmed to fire and smoke without any obvious worry in your voice 🤘 I'm English but live in Germany. Jeep is getting more popular here and I'm thinking of a Renegade for sometime next year. Could you really use it (with the mods) as an every day vehicle? What engine do you have in your's, diesel or gas (petrol)? You have a great style of presenting. really good to watch and above all, informative 👍

Can we get a new Jeep episode!? Keep up the great work!

Awesome video I like the way the tire sits low for visibility

Pretty good product and install. I'd have used never-seize on the bolts.

You really put a lot into these videos! Really well done... Thank you. :-)

That jeeps looking killer sir, awesome video as always keep it up

Looks great. Loving your Jeep!

Thanks for the great build videos!

I like that leverage trick with the Allen wrench you did.

Another winner Jason. Did you ever do a follow up with the gas can and license plate and rear brake light installs?

Thanks man. Support yours as always. Pretty cool

you're jeep looks awesome!!!

that's a badass bumper

think u should use the J.W. Speaker® 279 J Series LED Tail Light Kit, looks like it would fit perfectly with the kits you have been installing

Another fantastic video...thank you!!

Looks nice I want one for my 98 tj but you need to watch a video on how to pack a bearing by hand, probably not gonna hurt for that application but a wheel bearing would be junk after your job

i love your jk build!!!

Thats a good looking jeep!

Txs for your videos man!! I'm just like you!!! I like what you like and do it all my-self lol At least always trying to.. lol Lets keep going!!!

I say this all the time but it's true. Another fantastic video.

Jason you should do a video on how you keep your jeep so clean I have a 2014 black rubicon 4 door and I can't seem to clean all the nooks and crannies as well as you can. It would be a great video!

I love your videos. I hope you have enough money to continue adding parts :)

Hey Jason, Im so keen to see the mustang build. Any more vids?

Love your vids, and your Jeep. Quick question. What grease did you use to pack the bearings? Thank you

Would you ever loctite any of the bolts that were fastened to the frame? Or why didn't you use loctite?

This makes the best videos.

How do you maintain the bearings. I don't see a zerk fitting

Nice job bro

awesome rear bumper...this may have to happen on my 2015!

I like the way it looks without a lift

good work on the video

that's a great upgrade for the jeep you made it seem simple nice job. do you have any news on large Marge? I am afraid it's going to end up like the mavrick. I hope not really dig that car!

The sand fire was crazy

Loving it. Any issue with opening the back tailgate? Does it open fully?

Looks like a Metal Cloak lift is next!

I see a jeep in the reflection of your tailgate at about 1:50 .. I bet you'll mention it by the time I finish the video!

Looking awesome

Hey, I really enjoy the videos, but I have a question regarding the hi-lift jack on this bumper, I'm sure that you can already guess what I'm going to ask, but does it rattle, if so would maybe installing the jack a little bit lower fix it?

Does the tailgate on your Jeep hit the tire carrier gate when they are both all the way open? I love the looks of this set up just want to know about interference

That is one of the best bumper-carriers I've seen ever. Looks very sharp and well-made. As far as just the bumper, how heavy do you think it is? I know the stock is very light. Thanks man! great videos.

I was thinking that I should get a 2016-17...but I think a 2013 would be great!

so now that you took the stock tow hook off will you be rigging up a new one?

Love the videos man! Keep up the great work!

Love the JK videos! I've been looking for a front and rear bumper setup for our project JK (Project Dirty Willy) and haven't been able to find anything we remotely like. Sad to say, I don't like this one either, I just don't like bumpers that don't contour to the body of the Jeep. This bumper does good with that on the rear but not around the sides, so it leaves the pinch welds on the sides of the tub exposed and to me that just doesn't look good. Don't get me wrong these are great quality products but MOST aftermarket bumpers just don't look like they belong on a JK, they are all function but no form/fit/style or looks. Our rig gets used but it also looks really nice, that's why we can't find fenders either. Again MOST of them just don't look right on the JK. It's hard to explain, if you check out some Project Dirty Willy videos on my channel you will see the look we are going for. We like everything to look like it belongs on the Jeep, almost as if it was a special "option". The wife calls it the SWAT/Tactical/Police look, check it out if you get the chance or know of any products that may fit our build style. Once we get it back that is, we got rear ended so it's in the body shop, I've got videos about that as well. Anyway, thank you very much if you do take a look. Keep the JK videos coming!

What size wheels and what size tire? Sweet setup

Hey what are the exact names and sizes for the tires and wheels? I myself am planning on customizing my wrangler soon and I really like the ones you have!

Enjoying watching your build! Thanks for doing this. Fyi lock washers suck (from industrial experience) better off using locktite.

nice job bro

I would highly suggest a locking lug nut for your wheels and spare bud!

Hi,does anyone have an opinion on ARB Old Man Emu suspension?

Really like the bumper, where did you order it from?

There's a lot of spatter on that bumper, is it mig welded?

When's the suspension lift coming?

фантастическое исполнение, все аккуратно сделано и работает идеально!!!

Great videos buddy, definitely doing the same setup by metalcloack. I always see you clean all ur parts ? What kind of cleaning products are u using ??

Plastic/rubber parts do not take very long to fade and loose their deepness if they aren't maintained with trim products. Especially with the amount of dirt and sand that get's on it, they dry out. The sun and UV does the same. It's similar to your skin. Gotta moisturize it. Or coat it.

Nice tutorial.

Can u please share the link to this rear bumper and tire carrier. Thanks in advance

If I had one thing to nag about, it would be the right pin. It would be nice if that pin locked when you closed the tire carrier. Anyways, the build is coming along sweet.

I get u like your jeep and all. but can u post note videos of your mustang, it's the only reason I subscribed.