Тёмный
No video :(

Rear HVAC controller replacement - Buick Enclave, Chevy Traverse, GMC Acadia, Saturn Outlook 

Nate Fixes It
Подписаться 3 тыс.
Просмотров 13 тыс.
50% 1

This video shows you how to replace the rear HVAC controls for a 2008-2017 GM SUV built on the Lambda platform which includes the Buick Enclave, Chevrolet (Chevy) Traverse, GMC Acadia, and Saturn Outlook. My blend door actuator was always stuck on hot, this video shows how I replaced the control unit when replacing the blend door actuator didn't fix the problem.
Here is a link to the part and tools that I used:
GM 15109353 Rear HVAC Climate Control Panel: amzn.to/3w0mwPp
12-in-1 Magnetic Screwdriver: amzn.to/3FBNQXn
www.NateFixesIt.com
As an Amazon Associate I earn from qualifying purchases.
Copyright 2022, NateFixesIt, LLC
All information presented in this video is my opinion. Use at your own risk. For my full disclaimer see www.websitepol...
how to replace enclave rear hvac control
remove rear hvac controls
rear climate control
how to replace traverse rear climate control not working
Right Angle Screw Driver: amzn.to/39L4d8d
AC Delco 15-73666 Blend Door Actuator: amzn.to/3w1aJAm
ACDelco GM Original Equipment 15-73666 Temperature Mode Valve Actuator Assembly
Enclave Traverse Suburban Tahoe Yukon Rear HVAC Climate Control Panel 15109353
OEM NEW HVAC Heater A/C Climate Control Dash Unit 07-14 GM SUVs 15109353
HVAC Heater A/C Climate Control Dash Unit
Yukon Suburban Tahoe Escalade Enclave Traverse
15109353
1510-9353
2007-2010 Saturn Outlook
2007-2016 GMC Acadia
2008-2017 Buick Enclave
2009-2017 Chevrolet Traverse
2007 Saturn Outlook
2008 Saturn Outlook
2009 Saturn Outlook
2010 Saturn Outlook
2007 GMC Acadia
2008 GMC Acadia
2009 GMC Acadia
2010 GMC Acadia
2011 GMC Acadia
2012 GMC Acadia
2013 GMC Acadia
2014 GMC Acadia
2015 GMC Acadia
2016 GMC Acadia
2008 Buick Enclave
2009 Buick Enclave
2010 Buick Enclave
2011 Buick Enclave
2012 Buick Enclave
2013 Buick Enclave
2014 Buick Enclave
2015 Buick Enclave
2016 Buick Enclave
2017 Buick Enclave
2009 Chevrolet Traverse
2010 Chevrolet Traverse
2011 Chevrolet Traverse
2012 Chevrolet Traverse
2013 Chevrolet Traverse
2014 Chevrolet Traverse
2015 Chevrolet Traverse
2016 Chevrolet Traverse
2017 Chevrolet Traverse
2009 Chevy Traverse
2010 Chevy Traverse
2011 Chevy Traverse
2012 Chevy Traverse
2013 Chevy Traverse
2014 Chevy Traverse
2015 Chevy Traverse
2016 Chevy Traverse
2017 Chevy Traverse

Опубликовано:

 

12 май 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 58   
@NateFixesIt
@NateFixesIt 2 года назад
Here is a link to the part and tools that I used: GM 15109353 Rear HVAC Climate Control Panel: amzn.to/3w0mwPp 12-in-1 Magnetic Screwdriver: amzn.to/3FBNQXn
@LifeHasLessons
@LifeHasLessons 3 месяца назад
I can’t believe how every time I keep searching for 2017 Buick envision and there isn’t any videos on that car
@NateFixesIt
@NateFixesIt 3 месяца назад
Sorry to hear that, the Chevrolet Equinox is built on the same platform, you could try searching for videos on that vehicle.
@dwaynedobine3970
@dwaynedobine3970 2 года назад
Nice video. I was trying to get mine out and I had no idea it had that many screws to get it out.
@NateFixesIt
@NateFixesIt 2 года назад
Glad that I could help!
@feliperodriguez2716
@feliperodriguez2716 Год назад
Thanks, very helpful and straight forward.
@NateFixesIt
@NateFixesIt Год назад
Thanks for watching!
@richarddeal7584
@richarddeal7584 5 месяцев назад
Done! Thanks 😊
@NateFixesIt
@NateFixesIt 5 месяцев назад
Congrats!
@jorgerea939
@jorgerea939 2 года назад
I have been looking very long for your video in regards to the rear HVAC. The HVAC controller knobs get very HOT on my 2014 Traverse. Still working on trying to fix mine.
@NateFixesIt
@NateFixesIt 2 года назад
Glad you found the video, good luck with your repair!
@andreauribe8556
@andreauribe8556 2 года назад
Hello.. did you find the problem why the controller knobs getting very hot? I have the same problem with my Traverse.
@caseyhouk4875
@caseyhouk4875 2 года назад
I have this issue as well with them getting hot. Why do they do that?
@NateFixesIt
@NateFixesIt 2 года назад
Lots of people seem to have the issue with hot knobs, I don’t know why they are getting hot. Never noticed it in our Enclave.
@foreman608
@foreman608 10 месяцев назад
Great video, thanks
@NateFixesIt
@NateFixesIt 10 месяцев назад
Glad you liked it!
@arturosalinas8797
@arturosalinas8797 Год назад
Great video totally helpful, thanks.
@NateFixesIt
@NateFixesIt Год назад
Glad that I could help, thanks for watching!
@AnneMarieBrown-g8t
@AnneMarieBrown-g8t Месяц назад
Question my control lights on the rear knobs in my 2015 traverse are out , is it easier just replacing this whole panel or can you show a video how to replace the bulbs ?
@NateFixesIt
@NateFixesIt Месяц назад
The bulbs are LEDs that are integrated into the circuit card and not separately replaceable. If you want the lights to work, you will need to replace the whole control unit.
@tomilheirobarbalho6117
@tomilheirobarbalho6117 2 года назад
Very good 😊
@NateFixesIt
@NateFixesIt 2 года назад
Thanks!
@kailuamakai8943
@kailuamakai8943 7 месяцев назад
I get an annoying humming noise coming from ours, our battery started drain now as well. I wonder if a bad hvac control unit would cause the battery drainage?
@NateFixesIt
@NateFixesIt 7 месяцев назад
It shouldn’t drain the battery, but stranger things have happened. If it’s making a humming noise there is something wrong with it and I would recommend replacing it, they aren’t super expensive. If you do, let us know if it fixes the battery draining issue!
@unclestuntman
@unclestuntman Год назад
There's a high pitch frequency coming from mines. Could I just unplug it since no one is ever back there or would that cause something else not to work?
@NateFixesIt
@NateFixesIt Год назад
Unplugging at the actuator shouldn’t hurt anything.
@carlfox15
@carlfox15 Год назад
I have the same issue that high frequency noise drives me crazy my wife and kid ignore it though. I’d unplug it if we didn’t have a kid haha
@alih25
@alih25 Месяц назад
After you change the part did that solve the problem , and it start to cooling ???
@NateFixesIt
@NateFixesIt Месяц назад
I had two issues, the controller was bad and the rear blend door actuator failed. I suspect the bad controller burnt out the blend door actuator. I have a separate video for the blend door. Replacing both got everything going again.
@hugoarreola4770
@hugoarreola4770 8 месяцев назад
Natefixeslt i have a similar problem but the rear only blows cold no heat and mines is a 2010 travers and its digital with push buttons could this be the same issue.its at 106kmiles? Thanks
@NateFixesIt
@NateFixesIt 8 месяцев назад
Could be the same issue as mine. However, the first thing I would check is my engine coolant levels for the engine radiator. Hot coolant is what provides the heat to your cabin. If the coolant is low, you may not be getting heat because of that. If you have the full coolant, it could be the control module, a heater core, or a blend door actuator. To diagnose, You can try this: turn off the A/C system and start the engine, let it warm up to normal running temp and crawl under the passenger rear corner of the car just in front of the bumper. There are 4 pipes and hoses going up through the floor pan. The A/C lines should be at ambient temp and the heater hoses should be hotter. If you warm it up all the way you should be able to hold on to the heater hoses for about a second with both hoses the same temp. If the same then you need a blend door actuator or control unit. If temps are different then it's a heater core. This video shows how to replace the blend door actuator: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-S_JB5KGEykM.html
@hugoarreola4770
@hugoarreola4770 8 месяцев назад
Ok thank u...mines blows hot in the front but not the back.
@MTGIRL784
@MTGIRL784 2 года назад
Good day and thank you for your informative video It was very helpful. However I was wondering if you would do a little bit more troubleshooting with me. The fuse is not blown and I changed this out with help from your video. The controls still are not working they light up but they don't do anything. Any thoughts?
@NateFixesIt
@NateFixesIt 2 года назад
Hard to troubleshoot from a distance, but the next things I would check to see is if the electrical signals are getting from the controller to the HVAC unit at the passenger side rear of the vehicle. The fan is the obvious thing to be able to tell if it’s working or not, but you can also listen for the blend door actuator and mode door actuator to see if they are responding to the controls. If the blend and mode door actuators are working, but the fan is not, I would guess it’s a bad fan. If nothing is working, I would guess a wiring issue. Check out this video to see where they are and what the actuators should sound like: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-S_JB5KGEykM.html
@jodetusa6422
@jodetusa6422 Год назад
Hi! I have the 07 Outlook, with the separate radio/climate controls in the back. They light up but I do not feel any air coming out from the rear air vents. Would replacing this specific part fix or would it be the rear blower motor?
@NateFixesIt
@NateFixesIt Год назад
I would start by checking your fuses. After that, it could be either the blower or the control. To troubleshoot, you could use a multimeter to see if you are getting power out of the control unit or to the blower fan. To see how to access the blower fan, you can check out my video for replacing the HVAC blend door actuator in my Buick, it’s quite a process, but should be similar for your vehicle.
@mikewheatley2739
@mikewheatley2739 11 месяцев назад
On my unit the lights on the knobs come on but the fan switch.
@NateFixesIt
@NateFixesIt 11 месяцев назад
It could be a burnt out light for that switch. Are you having any other problems?
@PabloGarcia-cu3ol
@PabloGarcia-cu3ol Месяц назад
My rear ac just won't turn on ! Do I have to change that too?
@NateFixesIt
@NateFixesIt Месяц назад
It could be a number of things, the controller, the blend door actuator in the rear, a clogged expansion valve, a burnt fuse, etc. You will likely need to do some diagnostics before starting to replace parts.
@amicopeland407
@amicopeland407 7 месяцев назад
Do u think it needs to be changed if the control is hot and only two glow in the dark but it still works
@NateFixesIt
@NateFixesIt 7 месяцев назад
If the control is hot, it could be a safety issue, even if not, it’s probably not going to last much longer and should be replaced.
@carmabitesbac
@carmabitesbac 2 года назад
Enjoyed the video great detail! My 2013 Enclave the rear fan switch/on-off just stopped working and the rear won’t come on. Do you think the switch is just bad? I would hate to buy one and that wouldn’t be the cause…Your input would be Very helpful thanks!!
@NateFixesIt
@NateFixesIt 2 года назад
First, try turning the fan up to full. There is usually a resistor that is in the circuit for lower fan settings that slows the fan down. Those can burn up and take all but the highest fan setting off line. If the fan works on high and nothing else, replace the resistor. Next check your fuses, and try replacing the fan fuse, you can even swap it with a different fuse with the same rating to test it. If that doesn’t fix it, it could be the switch or the fan. Replacing the fan would be a lot more work (see this video for how to access ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-S_JB5KGEykM.html), I would start with switch unit. If you have a multimeter, you could try testing the control unit, but I’m not sure if that will be possible with the wire harness and no other connection points. Good luck!
@bokeefe6000
@bokeefe6000 5 месяцев назад
My control unit is still functioning, I just had one of the knobs break. Is it possible to just replace one of the knobs? I don't need a whole new control unit.
@NateFixesIt
@NateFixesIt 5 месяцев назад
I just checked and the knobs on mine don’t seem to be removable. You may need to replace the whole control unit.
@bokeefe6000
@bokeefe6000 5 месяцев назад
@@NateFixesIt Technically it's not the whole knob, just the part that shows what the knob does. I am going to try to add pictures.
@ssantana25
@ssantana25 2 года назад
Having trouble with my rear control panel on my gmc acadia the the fan works in the front but not in the rear the lights on rear control won't light up and fan don't work on the rear
@NateFixesIt
@NateFixesIt 2 года назад
Check your fuses for the rear first (I suggest putting a new fuse in, not just looking at the old fuse as it can be difficult to see a failure some times). If they are fine, it could be the control panel.
@rere559
@rere559 Год назад
My controls work in the back of my traverse but they don’t light up do you think that’s the fuse? If so is it in the vehicle or under the hood?
@NateFixesIt
@NateFixesIt Год назад
I think that there is just one fuse that protects all of the functions in the rear HVAC; so if it’s working, the fuse is probably okay and the light being burnt out is probably a different issue. It could be that the LEDs that back light the controls burnt out or a wiring issue somewhere. That said, checking the fuses is an easy and inexpensive thing to try. The owners manual for your vehicle should have a diagram that tells you exactly where all of your fuses are and what they control. Check your manual, but I highly suspect there will be only one fuse and it’s under the hood like it is in my Enclave (see 15:20 of this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-S_JB5KGEykM.html ). Pull the fuse, verify every thing is off, and then swap in a different fuse of the same rating to see how everything works. Good luck and thanks for watching!
@allynpizana4849
@allynpizana4849 3 месяца назад
Do they sell just the knobs? My sons baseball bag broke it 😢
@NateFixesIt
@NateFixesIt 3 месяца назад
I haven’t seen just the knobs for sale and they don’t seem to be removable on my Enclave. Sorry to be the bearer of bad news!
@yamircaro1183
@yamircaro1183 28 дней назад
How do you trouble shoot down to the control
@NateFixesIt
@NateFixesIt 28 дней назад
First check your fuses. Do you have heat and cooling both places? For me, the rear blend door actuator was burnt out and when I replaced it, the controller kept pushing it to the same position. I tried switching the controller across actuators to narrow things down. What is the issue you are having?
@Whit_Siever
@Whit_Siever 7 месяцев назад
2017 Enclave: control module has bad backlighting cannot see some buttons at night, actual LCD digits/symbols not visible to human eye Please Enclace stop eating my $$$
@NateFixesIt
@NateFixesIt 6 месяцев назад
That’s really frustrating, sounds like a design flaw.
@YourNeighborCarl
@YourNeighborCarl 3 месяца назад
This car seats 7 so you most likely have kids which is why you bought it. So if you value your sanity on a road trip then disconnect this control panel. If you are like me then the last thing you want on a road trip is for your two ADHD kids to be messing with the radio volume and the climate controls. Do yourself a favor and watch this video to learn how to disconnect the unit and then put it back together.
Далее
13 Карт - Мафия | 5 серия
08:51
Просмотров 283 тыс.
2011 Chevy Traverse LT Blower Motor Replacement
9:51
Просмотров 3,5 тыс.
2014 Traverse REAR Actuator Replacement
13:12
Просмотров 40 тыс.
13 Карт - Мафия | 5 серия
08:51
Просмотров 283 тыс.