Rebuild Final Drive Motor - Mini Excavator Travel Motors 

Yes. A very interesting and educational look at what it takes to finish a job.

Thanks for your knowledge sharing.

Grazie per il video!

Thank u . Show us rebuilt

Damn right, great informative video, This is the stuff I like to see. I enjoyed this.

Do you have a video on removing the final drive motor? I have a 303cr and want to change out my bad for a new one on my own.

Nice work colleagues !

It would be good to show what parts move and what bits don't. I'm trying to figure out how the gearing works and how the motor drive gets to the final cog.

Do you have a part name retainer for bobcat E45 ?

Thanks

make more video.. make video on how to tune two speed skid steer

thanks man that really helped me out :)

I've lost drive to the left track on my takeuchie tb035 mini excavator and I'm think the final drive has detached? The right hand track is working fine so I don't think it's a pressure problem? Do you guys have any ideas on what it could be? Great video by the way!!

Seems like swashplate needs good additives in hydraulic oil. Is there any oil standard these drive motors require?

The machine I got is a terex tc35, I think it’s the same drive motor. We bought it with the snap ring missing, my guys now routinely repack the final drives themselves on site. Should I send it your way ?

great video! I learned a lot.

How much will it cost to remain the tracking motor

can a 20 ton press be used to press apart the hubs on a 331 final drive

Nice job

What tools did you use that’s my main issue.

Update pleases.Would love to see where this goes!!

instead of pounding to the side.. why not modify a forged ring eye to a tapered pipe thread pipe plug so its a solid thread then you can lever it out or use a small slide hammer with a hook or chain thru the forged ring eye.. i worked in an engine rebuilding shop back in the 1990s.. the tear down guy got the engines that were covered a half inch thick in grease.. he hated those. since it was hanging on the hoist about to drop on his tear down bench.. i said lets try this.. and rolled it over and set it down on the spray wash tank and gave it a spin in the washer.. came out mostly clean and much easier to tear down. as long as you plug the hydraulic holes with real metal plugs not plastic. wash away before tear down. when i change the oil in final drives.. i drain and refill.. as normal. but then i get the track up in the air and i run it for a few minutes with no load.. just the track zooming around.. i then drain it again.. refill.. now i know i have gotten a much higher percentage of grime out of the gears.. when its really bad.. i have done it 3 times. each time running the drive to stir up sediment that the clean oil can suspend easier.

Well change that next month I promise

Do you have any vid's on how the drive works ??

Обратно собрать сможешь? )))

My final drive motor is leaking oil not fro the hydraulic section but around the motor itself

Frn do you have mitsubishi me30 final drive assembly list please

Mmmm sludgy....it takes a looooooong time for gear case lube to get like that.

I need parts for my Mitsubishi trackhoe m o s 70 the final drive gear can you help me find it

Fr

Co ban khong

Nervous man

Boy there's nothing wrong with that

Gurit bulat simpan bol byring 2,3 yang tiga batang tu shalp all to wo bol byring 22 biji