Тёмный

Rebuild Yamaha YZF-R1 RN09 2002 - Part 5 Tank, Fuel Cap and Pump restauration, cleaning, repair 

Chris W.
Подписаться 431
Просмотров 13 тыс.
50% 1

Glücklicherweise ist der Tank innen wie neu, nur der Einfüllstutzen und das Tankschloss waren rostig. Abgeschliffen, gereinigt und mit Rostumwandler eingelassen. Nochmal drübergeschliffen und mit Fett versiegelt. Der Filter der Benzinpumpe hatte eine Reinigung notwendig, um den Motor der Benzinpumpe haben sich Metallspäne angesammelt und ein Stecker war bereits korrodiert. Das Tankschloss war so vergammelt, dass ich den Schlüssel teilweise nur sehr aufwändig herausbekommen hab. Der Stift mit der kleinen Feder im Tankschloss ganz unten im Gehäuse (2 Schrauben) bei der Verriegelung dient dazu, dass man den Schlüssel bei geöffnetem Tankschloss nicht abziehen kann. Die Carbonfolie am Tank dient nur als Schutz, damit die GFK Tankhaube keine Kratzer hinterlässt.

Опубликовано:

 

3 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 22   
@giovannicooper93
@giovannicooper93 2 года назад
Thanks this Video just saved me a headache and got my bike started. I changed my fuel pump following another video that had a step missed “the oring for pressure hose wasn’t installed correctly installed the way you did and it started right up bike was sitting for a month because I couldn’t figure out where I went wrong lol
@nothingbutsmol
@nothingbutsmol Год назад
Can confirm, think I did similar thing as you with my fuel pump assembly after replacing a different o-ring for the pressure regulator return nipple. Noticed o-ring in this video was crooked when I put the two pieces together and made sure to straighten it out but didn't realize its not supposed to be inside the top half to begin with haha. Bike now seems to have a super low idle for only a second or two on startup when it didn't before. Looks like I need to go back in there and double check using this method. Will report back with update.
@Skrollex74
@Skrollex74 2 месяца назад
nicee woooork!!
@ToyMaestro
@ToyMaestro 5 месяцев назад
how do you know if I should replace the whole assembly or just the pump ? like how do I know if thr actual filter inside that white shell needs to be replaced i looked inside and its looks really dirty lol.
@cwimm95i
@cwimm95i 5 месяцев назад
i think you can only purchace the whole white body with pump. in europe its very expensive.
@jax2135
@jax2135 2 месяца назад
Is there a second fuel filter/ strainer?
@cwimm95i
@cwimm95i 2 месяца назад
@@jax2135 i dont think so. i have not seen one.
@simonplatzer6586
@simonplatzer6586 2 года назад
Danke hat mir bei meiner rn22 sehr geholfen
@Mandarb10R
@Mandarb10R 2 года назад
Danke für die gute Details. Ich habe gerade das selbe Projekt (RN09 aus 2002). Meine Spritpumpe sieht aber eher gelb als weiss aus. Womit hast du den Filter denn gereinigt? Das Tank und Zündschloss werde ich, nachdem ich deine Videos gesehen habe, auch mal zerlegen.
@cwimm95i
@cwimm95i 2 года назад
Die vergilbung am Kunststoffgehäuse der Pumpe ist normal. Benzin wird ja auch gelb eingefärbt. Den Filter hab ich mit Bremsenreiniger aus der Spraydose gereinigt und vorsichtig mit Druckluft von Innen nach Aussen durchgeblasen. Viel Erfolg noch. Grüsse Chris
@Mandarb10R
@Mandarb10R 2 года назад
@@cwimm95i Danke :)
@Trib3Craft1210
@Trib3Craft1210 2 года назад
du weisst ich liebe deine projekte aber hasse deine musik.. dank mutebutton kann ichs mir anschaun xD
@mhellcess4532
@mhellcess4532 2 года назад
Bro maybe you know this what do you call the white thing where the the big hose is connected mine is leaking bad coming from that maybe there’s a repair kit for that. Thanks
@nothingbutsmol
@nothingbutsmol Год назад
If you're talking about the straight nipple that is like a separate piece, that piece connects to the pressure regulator return hose. I just fixed a leak on mine, you should hopefully just need to replace the o-ring. You have to pull the pump out and apart though, to get it out. I bought a buna-n o-ring set from homedepot "danco 200 assorted plumbing o-rings", I used #8. Outer diameter 9/16", Inner diameter 3/8", wall 3/32". Make sure its the right material compatible with gasoline if you get the oring from where else.
@zvczdnl2053
@zvczdnl2053 6 месяцев назад
eyy Chris, What could this sensor be that can be seen at 3:33? It has 1 wire (in parallel from the negative supply of the pump) and a "spring contact" inside at the main filter. Can you answer me?
@cwimm95i
@cwimm95i 6 месяцев назад
I think this is a fuelpressure sensor, which shuts up the pump when enough pressure is reached.
@zvczdnl2053
@zvczdnl2053 6 месяцев назад
@@cwimm95i as far as I know there is no fuel pressure sensor in the system, it could be a switch at most
@cwimm95i
@cwimm95i 6 месяцев назад
@@zvczdnl2053 ok, maybe a fuelpressure switch :) But as far as i know it stops the pump when the fuelpressure is reached, like you can hear when you turn on ignition. you can hear the fuelpump for a few seconds.
@zvczdnl2053
@zvczdnl2053 6 месяцев назад
@@cwimm95i the ECM switch off the pump after 5 sec!! You can check this without fuel pump too. After ignition ON the ECM give 12V to the pump for 5 sec, than stop it, if you press the start button ecm gove again 12V to pump
@cwimm95i
@cwimm95i 6 месяцев назад
@@zvczdnl2053 ok. good to know. thank you. write me if you find the task of the sensor.
Далее
Rebuild Yamaha YZF-R1 RN09 2002 - Part 6 Custom Gauge
5:01
小路飞嫁祸姐姐搞破坏 #路飞#海贼王
00:45
Китайка нашла Метиорит😂😆
00:21
Вопрос Ребром - Серго
43:16
Просмотров 1,7 млн
Quantum Fuel Systems Pump Install on 2006 YZF R1
12:16
R6 FUEL LEAK FIX 03-05 YAMAHA (leaking nipple)
5:21
Просмотров 4,2 тыс.
FPF Yamaha R1 fuel pump installation
4:04
Просмотров 13 тыс.
2003 R1 hard starting first start of the day
7:02
Просмотров 11 тыс.
Full renovation Yamaha YZF-R6  step by step
27:42
Просмотров 118 тыс.
小路飞嫁祸姐姐搞破坏 #路飞#海贼王
00:45