In this epicode we continue work on the 2015 Rzr with new headlights, front screen, mirrors, new belt and seat belts. We didnt break in the new belt and that cost us, we had o get another one. Thanks for all the support.
Who what never would think you have to brake a belt in like that a timing belt you do not have to brake in! Love you guys stay safe and tell Mike to wear the seatbelt!!!!!!!
Awesome, I just finished my polaris ranger from iaa and didnt know about belt break in, keep the vids coming and check front and rear diffs mine had water in the rear diff and i had to revuild the whole front end.
I started watching your channel when you were doing the big Volvo tractor. I find that type video, where you are doing extensive repairs to return a damaged vehicle to as new, interests me more than repairing and modifying this little off road vehicle.
Don't know how much you guys know about clutches, perhaps not much seeing how you didn't know you needed to break the belt in lol. But a few tips incase you did not know. It is a good idea to wash the new belt in dish soap and let dry (gets the material off from manufacturing process). You likely have debris in clutch from previous belt blow out. Would be a good idea to at least blow out clutches with compressed air and clean the sheaves. Be better to pull clutches and give a thorough cleaning, make sure primary bearing spins freely. I would not be surprised if clutch alignment is off causing the belt issue as well seeing what this rzr has been through. Just a few things.
I would add a gusset plate to the rear to reinforce the rear tie rods. That metal has been stressed and will cave in again on a hard hit. Bolting up that rear plate or better yet welding it to the rear bulkhead will keep the Rear strong
Don't do speakers, better yet just get 2 portable bluetooth speakers and play off it. instead of side view mirrors, get one rear view mirror so when you are going thru narrow areas it's very helpful. Winch, get a good Winch! Also change the air filters make sure there is no water and clean out the air filter tub, there should be a small drain valve under it. obviously check all fluids and check all bearings.
@@NikoBrothers you had tons of fans asking you questions. I’m sure you could have responded. Not a good look when your trying to build a channel. Just sayin.
