Rebuilt Porsche 996 Turbo Project - I didn't fix it right the first time

Подписаться 102 тыс.

Просмотров 22 тыс.

50% 1

The never ending, world's worst, Porsche 911 Turbo project - You guys called me out on it, now time to fix it! I should have done it right the first time!
Milwaukee Tool GIVEAWAY Here: www.boostedape...
Instagram - / matt13ross
Renndition Cupholder & Ashtray Delete: www.etsy.com/s...
Rennline 996 Parts: www.rennline.c...
Light Savers and Other 996 Stuff: rennfix.com/li...
Porsche Upgrades / Parts: Site contains affiliate links for which I may be compensated
Light Savers: amzn.to/44oSfs0
2K Aerosol Gloss Clear Coat: amzn.to/44pOJgV
OEM Gas Cap: amzn.to/3NTXbji
Kenwood Amp: amzn.to/3NLJqSD
Black Turbo Badge: amzn.to/3qWQRON
Battery Crimp Tool: amzn.to/3r41Ztz
U-Clip Screw Set: amzn.to/3qTMOTq
Interior LED Kit: amzn.to/3nnZWhX ebay.us/mNZbJp
IPD Comp Plenum: amzn.to/3m1pWyM ebay.us/3thcOg
74mm Throttle Body: amzn.to/3m0HGuw ebay.us/T8VmrF
T25 Screws: amzn.to/3oKd2Hf
U Clips: amzn.to/3MIsH1K
Pioneer Amp: amzn.to/3MBAyQi ebay.us/a6Y5Em
Amp Wiring Kit: amzn.to/3zPr4t4 ebay.us/cXsxdz
Sun Visor Covers: amzn.to/3no04Ot
HPS 5.0 Brake Pads: amzn.to/41PhG5N amzn.to/3EOfiSy
Atoto Wireless Carplay Stereo: amzn.to/3EtocoE ebay.us/POSyP8
Stereo Wiring harness: amzn.to/3RxeR4l
Dash kit: amzn.to/3HzTJ8S
Alcantara Shift Boot: ebay.us/mLjsAB
LED Signal Relay: amzn.to/3EYun4t
License Plate LEDs: amzn.to/3V1fYdj
ABS Plastic Sheets: amzn.to/3UYpCNw
Fog Light LEDs: amzn.to/3E8AMbN
Turn Signal LEDs: amzn.to/3O8YMA0
High Temp Vacuum Hose Kit: amzn.to/3MHnpDi
Fuel Injection Hose Clamps: amzn.to/3CN9Bmp
Radium Fuel Pump Kit: amzn.to/3MiRRUb ebay.us/uZAFOj
Common Tools I use:
Milwaukee 3/8" High Speed Ratchet: amzn.to/3zo9NqC ebay.us/KR0raE
Milwaukee 3/8" Impact: amzn.to/3GaiYyT ebay.us/DhzBdX
Milwaukee Right Angle Grinder: amzn.to/3BwUgFj ebay.us/bRXqAz
Tekton Swivel Ratchets: amzn.to/3uLXdNs ebay.us/3MHh5k
Retractable Pressure Washer: amzn.to/3EgZmH1
Quick Jacks: amzn.to/36gkqBc
Garage Upgrades:
Vevor Air Hose Reel: amzn.to/448ZNQp
Noco Genius Battery Tender: amzn.to/3zOCoFY ebay.us/lZJCxy
Battery Tender Wiring Harness: amzn.to/3UncTVL ebay.us/276IRz
Extension Cord Reel: amzn.to/3o4SyZ3
LED Ceiling Lights (set of 6): amzn.to/36m00GP
LED Cabinet Lights (set of 3): amzn.to/3irLWhg
Wall Cabinets: amzn.to/2TwigqJ
Wall Mount Power Tool Rack: amzn.to/3dNLHvc
Camera Gear:
Canon 250D SL3: amzn.to/2L477Jm ebay.us/vdqXH0
Sigma 18-35MM lens: amzn.to/3cSM1uY ebay.us/pjLbAT
DJI Ronin Gimbal: amzn.to/3zwyJff ebay.us/ppnxfj

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 209

@ShaneConanttheoriginal Год назад

It was pretty cool to see Tavarish wearing one of your shirts in a recent video as well.

@duhonaaron Год назад

Hell yeah 🎉

@matt13ross Год назад

Can someone point me to that video? I haven't watched his stuff.

@C5Z06 Год назад

LSC video from 4days ago where they did a food can drive

@GlennBerry Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lTD4gcx2Nr0.html

@david_s1 Год назад

@@matt13ross ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lTD4gcx2Nr0.html

@phgodts Год назад

Ceramic coat will protect against UV the part without varnish

@cleanasdirt6832 Год назад

You have a not giving up trait, that so many don’t have. Great video.

@matt13ross Год назад

No quitting!

@KemDIY Год назад

Need a shirt that says that. I’d buy it.

@matt13ross Год назад

Ha!

@aubreyi9986 Год назад

Use a ceramic coating on the red part of the light after u buff it.. that will protect it just fine

@bandwagon240 Год назад

Next go, get a respirator. That 2k clear is nasty stuff and you don't want to be breathing it in.

@matthewwain9958 Год назад

This is a very accurate comment. When I used to help develop paint at PPG for BMW, we wore full air supply breathing equipment with waterfall paint capture. Breathing it in would result in 24 hours at the hospital for observation.

@matt13ross Год назад

I wore one, probably could use a better one though.

@mikeh2200 Год назад

I would try an adhesion promoter like Bulldog Adhesion Promoter on the red part of the tail light lens. Sometimes plastics don’t accept paint/clear for some reason but this should help.

@brokepetrolhead Год назад

Last time I did heat lights I had no clear so ceramic coated them, 2 years later still perfect

@danielduchon1035 Год назад

Definitely would go for the red 3rd brakelight! 🤘😎

@nickg2027 Год назад

the rear lamps had a black tint and that could be still causing the issue, looks like a silicone contaminate. you sorted it in the end to be fair!

@matt13ross Год назад

They were paint tinted. Very odd problem though!

@culpritmedia7026 Год назад

I've come across similar issues after removing come matte paints (specifically chalkboard paint) from panels. I went down to bare metal and still had contamination. I ended up taking it to a paint and panel shop so they could fix it.

@davidpedder9048 Год назад

I've used the Spray Max paint in the past. No complaints !!!!

@fluffstar_ Год назад

Love that we still get the baller music and cinematics for the gas cap lol 👌

@matt13ross Год назад

YES!! lol

@missmyvw Год назад

I would recommend PPF on the lights. It will protect them, obviously, but should also act as a sort of clear coat for the red portion on the tail lights.

@MIUBHI007 Год назад

I really hope that clearcoat is formulated to stick to raw plastic, otherwise it’s going to peel off in a big sheet. When we do this at work, we always use some sort of plastic adhesion promoter like bulldog. Good luck and I hope for your sake that clear is set up for that. Also, never sand by bare hand, get some sort of sponge or flexible block/foam so you get a smooth result instead of digging in with your fingertips…Especially on uneven surfaces you are trying to make flat. Also, just an FIY, if you do wax or put a ceramic coat on the lights, make sure you wait around three months, so the clear can fully off-gas, otherwise you will trap solvents, and it will fail much, much sooner.

@Onlooker71 Год назад

Headlights and taillights look like new. So glossy. You’ve come such a long way with this project. No one could imagine what a train wreck it was when you first got it. Great work!

@Yore0 Год назад

It was a complete basket case when Matt first bought it. Like you said, the 911 has come a long way.

@matt13ross Год назад

Thanks a bunch guys!

@rickslick730 Год назад

You can always put a strip of clear film on the red part of the tail lights

@cheapcargarage Год назад

I’m so sorry you had the trouble with those taillights. I’ve had days like that myself. It’s sucks. The car is looking great!

@matt13ross Год назад

Thanks!

@Engineerboy100 Год назад

For the red plastic perhaps try some spray-on adhesion promoter?

@matt13ross Год назад

That may help

@Timbo1969 Год назад

It doesn't even look like the same car. You have definitely killed it .

@matt13ross Год назад

Thank you!

@laiebi_3639 Год назад

Tip to remove the washer caps without risk of breaking them: Apply a little pressure to the feeding pipe behind the headlight and it will retract and can savely be removed. Just have a towel there, some remaining water will spit from applying pressure onto the headlight ;)

@matt13ross Год назад

Next time! (hopefully won't be one though lol)

@swift__ Год назад

I ceramic coated mine ( 2x application ) you could do that for the red part…. but they look great 👌🏻👌🏻

@jasonbrown1237 Год назад

If you feel like tackling it again, sand use some adhesion promoter and then clear coat on the rear lamps. I’ve used this stuff in the past and the results were fantastic however this is the first time I’ve seen that issue

@B5Daytona Год назад

I just found your channel about a month or so ago…. is quickly becoming one of my favorite channels to watch on RU-vid.Love the content and the Porsche is looking phenomenal

@matt13ross Год назад

Thank you!!!

@colinc3829 Год назад

Hi Matt, have you thought about offering 996 clothing with the standard Turbo spoiler. Could give you more sales. Please keep the videos coming, giving me loads of ideas.

@matt13ross Год назад

Solid idea, thanks!

@christurbo951 Год назад

Great job! I ended up installing headlight Armor on my car and LED taillights.

@MowSow Год назад

I highly recommended you PPF the headlights to protect them from stone chips Also you need to be very very careful breathing in all those carcinogens. Use a 3M N95 or even better a respirator.

@Tuscanvince Год назад

You need to use 'panel wipe' rather than tar and glue before painting, I would say 🤔

@roberttowsley8958 Год назад

Love the Porsche videos!🎉

@matt13ross Год назад

thanks!

@LowCheese1 Год назад

Wear a respirator when spraying 2k products, it's terrible for you

@matt13ross Год назад

I did I did!

@rayvandervoort5164 Год назад

The Poorsche is really coming to getter. Change the break light to red. Love the car.

@toms2jz464 Год назад

Love your channel! Theres a company from japan that makes a taillight spray the brand is called vans its a $50 can that dries in seconds and works flawlessly spray it on the red section. It literally makes it look brand new and it comes out glossy and doesn’t fade. Its not like the cheap VHT crap.

@anthonybrand6137 Год назад

Looking good! 👍👍

@LowCheese1 Год назад

Try sprayway glass cleaner for final wipe down before clear, I've had great results

@matt13ross Год назад

LOLOLOL

@KirkVSSpock Год назад

Don't use a dust mask when clear coating, this won't help with chemicals. Use a proper chemical safe mask !

@danielduchon1035 Год назад

The problem with the taillights probably has got to do with the tintpaint. If you would try it again maybe try some silicone remover.

@bymohenski Год назад

For the red part of the rear light, use acryl transparent primar, then go with a protective coat.

@ricardoharewood775 Год назад

Cerakote ceramic headlight kit works best....been through 2k clears, other ceramic coatings, Megiuars headlight coating.....it outperforms all of them @ $17.00

@504yaj Год назад

I just want to say, and in Filipino, POGI PARE! Those cleared head and tail lights are bringing everything together... but just like in your previous videos, where are the BBS wheels? :)

@S2NAZ Год назад

The lights are a million times better Matt. Really weird about the red/clear thing though??? 👍🏻

@matt13ross Год назад

VERY WEIRD!

@vincentcarrano6329 Год назад

Hey Matt, you have above and beyond man. Time to tap out soon. Enjoy your sweet ride now. Love your vids.

@matt13ross Год назад

Now it's time for more fun mods!

@goktug2652 Год назад

i thing you can use ppf to protect them

@olivervaldes4223 Год назад

Glad to see the channel taking off. Big kudos !!

@matt13ross Год назад

Meh, the growth has been steady, but kinda slow lol.

@andrew_barros Год назад

Try a clear PPF with UV protection on the tails to add that protection youre looking for?

@craigsmith1354 Год назад

If the light comes back on the change the purge valve. It will reset after 96 miles of driving if you set the od2 drive cycle . Or on the scan tool channel 70 or 77 will activate live test in readiness mode.

@matt13ross Год назад

You sure the purge valve is the issues?

@coolcolschannel8773 Год назад

Put clear ppf on red part

@josephpressinger1525 Год назад

the progress is insane. love the videos! If there was one thing i would change, it would be the wheels as i think the black doesnt go amazingly with the yellow. a pair of BBS would be sick. but thats just a preference tbh and it looks great anyway. Keep it up!

@matt13ross Год назад

Wheel change coming!

@josephpressinger1525 Год назад

@@matt13ross AYY I just saw this, I was on holiday but thats great, can't wait!!

@belledetector 6 месяцев назад

I am impressed at how you deal with adversity! Btw. 3rd breaklight has to go..

@matt13ross 6 месяцев назад

Has to go?

@isaacbenjamin389 Год назад

Maybe just ceramic coat the red part of the tail light.

@matt13ross Год назад

Good point!

@gernottemmel1259 Год назад

I‘m impressed, you know Austria 😂 Its a pitty that so much stuff, you use is not available in Europe :-(

@tritonh5683 Год назад

That is one sexy build!!!!

@Socksniland Год назад

Your car is looking awesome! - great work and a pleasure to watch the progress! Just wanted to point out that it looks like your 3rd brake light was working when you pulled it out of the garage at 12:24, but not when tail lights were back in…

@matt13ross Год назад

26:30 everything working

@PARADIGMCREATIVEGROUP Год назад

looking great! Good work Matt. Loving this build. Go K24 now! Its amazing :)

@matt13ross Год назад

NO HONDA SWAPS! lol

@dooogides9176 Год назад

Try a plastic film clear protractor,then clear coat on it. ”but make sure it’s ok to put clear coat on plastic”

@Cubanb407 Год назад

Excited to see if the gas cap fixed the code

@matt13ross Год назад

same!

@996Revival Год назад

It’s the end result that counts hehe well done💪🏼

@matt13ross Год назад

Agreed, thanks!

@sneeroh Год назад

Just a heads up, 2K primer is really bad to breath in. If you spray it, you should use a real respirator.

@MrJbipes Год назад

3.33 Make sure you hit that hardener activator HARD to inject it into the spray can! I smacked in on the bench, you can't do it by hand. 13:37 Looks like you did

@matt13ross Год назад

I did it on the floor first.

@Alex.P_10 Год назад

You have the lights all polished up... Just put PPF on them 😭

@FL981S Год назад

Gas cap montage had me lol'ing. What about a clear 3rd brake light? Would blend in with the yellow better than smoke or red.

@matt13ross Год назад

But the tails are red, that's why i'm thinking red.

@timh4235 Год назад

Matt, love the videos. I have had the Porsche bug for a while now, never really looked for a 996 because of the headlights, but after watching your videos, I grown to appreciate them. Any tips of what to look out for when buying a 996?

@matt13ross Год назад

There are many more knowledgeable people than me when it comes to these cars. Depends on the model you're looking at too.

@VenturaIT Год назад

Looks good, you need new (new to you) OEM lights in the back anyway that aren't cracked... then you can do the 750HP turbo upgrades.

@matt13ross Год назад

Find me some that don't break the bank!

@VenturaIT Год назад

@@matt13ross I think I do have some 996 twists sitting in my front yard, not hollow spokes.

@VenturaIT Год назад

@@matt13ross I wrote a longer response but RU-vid deleted it for whatever reason. I found some lights for around eight hondred

@matt13ross Год назад

Too much $$$ for me to be worth it.

@sucapizda Год назад

Headlights are a Lexan type plastic. Tail lights are a regular type plastic. The clear might melting them. I would left the tail lights alone. They would not oxidize like the headlights. And please fix that hole in the front bumper.

@realyield Год назад

PPF the lights instead of clear

@matt13ross Год назад

Too late!

@gouldnj Год назад

No offense Matt, but this is why painters use “painter prep” products from a professional store. Not stuff they have sitting around their garage. You really should have called your professional friend who painted your car (maybe he can paint your missing bumper plug) or sought out the pros at a local store before starting. Painting in 100% humidity doesn’t help either

@matt13ross Год назад

I like to DIY everything I can. In the end, it turned out nice anyway.

@jimmyjamal2392 Год назад

Clear plastic primer matt

@ttmezger Год назад

I noticed your gas flap doesn’t stay open on its own. On my 997 turbo, it “locks” open, but I don’t know if they changed the design. Just mentioning in case you can get a new opening mechanism.

@matt13ross Год назад

Yea I figured it should stay open. I have to look into that.

@1drwnd.porsche Год назад

It looks like you need to adjust those headlights. The top part should sit flushed with the fenders.

@matt13ross Год назад

I do!

@matthewwain9958 Год назад

Pretty much just sorting a few minor issues now :) Well done. I really wish I had a project Porsche like this :)

@slowery43 Год назад

this isn't about you Mathew

@matthewwain9958 Год назад

@@slowery43 My god, you mean it isn't my own personal channel to share my experiences with? Where's my ad revenue??? 😛 /S

@matt13ross Год назад

Technically it is about Matthew....lol (me)

@apostoliw Год назад

You should have sprayed adhesive promoter first thats why doesn't stick

@matt13ross Год назад

But it's weird it only had that issue on part of the tails.

@aomidnawabi2964 Год назад

Next time wipe it down with solvent when the clear coat is still wet asap so you don’t have to sand it all off

@matt13ross Год назад

I've done that before and it mad a bigger, nastier mess.

@TheDsantander Год назад

You can screw the cap to the cover!

@matt13ross Год назад

Screw?

@SohelKatchi Год назад

What do you think of replacing the rims with OEM 997 turbo wheels? I did that on mine and I absolutely love it

@matt13ross Год назад

I want to be a little more different.

@gregsobek722 Год назад

Was wondering why you didn't use glass cleaner for a second straight video?

@matt13ross Год назад

LOLOLOL

@garethpoole1344 Год назад

Hi Matt. I'm also a 996 Turbo owner in the UK, loving your content and learning loads. Currently repairing and polishing a replacement headlight unit for my car, I noticed you sanded this time to 1000grit but didn't buff before applying clear coat, is this a feature of the clear coat that it removes the cloudiness from the lens? Sorry if this is a silly question. Just a word of warning, I hit a bird and smashed the lens on my original unit, sourced a 2nd hand complete unit from ebay, Turbo lights are different to normal carrera and very rare, so the guy charged me £996, funny guy :( ! It arrived damaged with 2 of the 4 lug type things that it slides in and out of the car on and hold it in place, snapped off. But as there were no other units in the UK (other than new from Porsche at £2500) I'm attempting to repair them either by plastic welding or adhesive, so just be careful taking the units in and out of the car, repairing or sourcing a new unit is a complete nightmare. Most of the time owning a Turbo is a nightmare so I fell you pain, but when it comes on boost..... :)!

@matt13ross Год назад

Yes, they need to be sanded before clear. The clear coat then fills in the sand marks, sticks, and looks like glass.

@slo2k Год назад

PPF them instead of clearcoat

@matt13ross Год назад

Too late meow

@joncamilleri2172 Год назад

The red on the tail lights is a mystery, but the car continues to impress now you have most the work done. Its surely a keeper now. Next stop, more BHP?

@matt13ross Год назад

Thanks! Needs a clutch before more HP.

@Bleeder9000 Год назад

Fucking hell stop teasing us with those KW V3s just laying around. Get them on the car!!!

@matt13ross Год назад

They are on now :)

@RichardDeluca-f3t Год назад

I miss your videos on the ZR two when do you think you’ll get one I Colorado

@matt13ross Год назад

I would love the new ZR2 Bison, but I don't have the budget for that right now.

@randominternetuser2888 Год назад

Does your fuel door lock? Have you checked it? Mine does not currently on my 03 996TT. I know you don't want more projects but I also know you want it right. I recently added those 'light savers' to my car as they were deteriorated in the normal way.

@matt13ross Год назад

Mine does lock, yes.

@Ariztid Год назад

Love it! But please, for the love of God, get yourself a 3M respirator. That clear coat is extremely harmful and that little mask is not going to do anything, especially in a close environment. Keep up the good work though.

@matt13ross Год назад

It's on the list!

@S2NAZ Год назад

Hey Matt, just a thought. Why don’t you try a different clear coat product on the tail lights?

@matt13ross Год назад

I'm satisfied with how they look now.

@arm2644 Год назад

Before putting the 2k clearcoat you should have used Plastic Adhesion Promoter to avoid the clearcoat to flake off! ¯\_(ツ)_/¯

@matt13ross Год назад

I don't think it's going to flake off, we shall see though.

@atrain132 Год назад

6:54 was that blinker fluid squirting out?

@matt13ross Год назад

LOL yes!

@De-rx7fz Год назад

Was the taillight bottom part not black before? and when removing it had some effect to clear coat being accepted? My front headlights have 3M clear protection wrap. I think that’s best way to protect front lights from damage and fade.

@matt13ross Год назад

It was paint tinted.

@bigtimber Год назад

Wasn't there some trail light wrap on there before? Maybe left over adhesive?

@matt13ross Год назад

No wrap, they were paint tinted though.

@atrain132 Год назад

Matt, what's the EVAP code is throwing? Like you said, it could be a slew of problems. But since it's an older car, I would look into stuff like the charcoal canister, or purge valve, or regeneration valve.

@matt13ross Год назад

P0446. There's SO many things it could be!

@atrain132 Год назад

@@matt13ross yeah could be a lot. I can't remember if you're having any issues like hard starts, problem at the gas pump stopping while filling.

@matt13ross Год назад

Don't have those issues, no.

@illiniarmory3142 Год назад

LETS GO BRANDON!

@yeah377777 Год назад

should've just put ppf on the lights. Much easier, faster and longer lasting

@grantroberts4231 Год назад

maybe he still could for the red

@matt13ross Год назад

I don't think ppf is longer lasting, but we will see!

@alanross7411 Год назад

I’m thinking the black tint that was on the red part of the taillights is your culprit.

@matt13ross Год назад

Weird though, as it had been all sanded off and buffed over thoroughly.

@alanross7411 Год назад

I’m wondering if because window tint is designed to stick to glass, some of the chemicals in the adhesive caused the reaction?

@matt13ross Год назад

Who knows???

@WickedIllusion1 Год назад

Since when are headlights/ tail lights clear coated anyway... I figured the UV protection was added into the plastic itself? OR why not just ceramic coat them?

@matt13ross Год назад

Ceramic coating is a step above wax, it's not an end all be all product.

@WickedIllusion1 Год назад

@Matt13Ross agreed, you'd have to re-apply every 6 months or so. But my biggest thing is... are tail-lights normally clear coated?

@matt13ross Год назад

Good question, not sure about the tails!

@BloodySoup74 Год назад

Did the new gas cap fix the dashlight code?

@matt13ross Год назад

Need to drive it more

@kayeman001 Год назад

dude - Crocs? 🙂

@matt13ross Год назад

comfy!

@KevinCamposT. Год назад

I used to paint guitars, and this kind of issues happens all the time, if you don't know how to do it properly is a pain in the A$$. Stop doing any more paint jobs after that 😅 Looks great btw 👌

@matt13ross Год назад

Painting is frustrating work!

@ebeing2955 Год назад

crocs are very bad shop shoes. too slippery. You almost wiped out, bro

@matt13ross Год назад

You are correct lol

@javieralomar8731 Год назад

Just so you know in time there going to turn yellow

@matt13ross Год назад

Why?

@javieralomar8731 Год назад

@@matt13ross Because of the chemicals in the clear the hardner

@Nick-vq1ye Год назад

What code reader do you use?

@matt13ross Год назад

A few, Carly, Ancel.

@mvanlinge Год назад

Which low beam bulbs are you using?

@matt13ross Год назад

I have them linked in description box.

@mvanlinge Год назад

I see the turn signal and the fog, but not the headlight

@matt13ross Год назад

Did you check the headlight video?

@mvanlinge Год назад

@@matt13ross nope

@matt13ross Год назад

Should be in there

@ZafiraSteve Год назад

Turbo the bmw

@matt13ross Год назад

NOO!! lol

@justinp2993 4 месяца назад

I'm 46 videos in on this series and the charm has wore off. The incessant flashbacks and the constant redoing of previous work (If I have to see those headlights come out again I'm out). Not to mention the drama shots. Come on there is nothing dramatic about a gas cap in a panning slow motion shot, it's a gas cap for christ sakes.

@matt13ross 4 месяца назад

It's about learning as I go. Learning to be a better videographer, video editor, story teller, and mechanic. I can't please everyone, I'm just a dude in a small home garage doing what I love.