RECLINER REPAIR: RECLINER MECHANISM DISASSEMBLY 

Glad it helped

Thanks!

I have a video that talks about this. It’s theoretically possible, but quite a bit of work. Definitely easier than the other way around. If you removed the motor and all electrical components, you could run a manual handle over the center drive tube, but you would also have to figure out placement for springs to create the right tension.

Thanks for watching our video! Do you mind sending me some images or a video of which bearings you are referring to? You can send them to our email at The323concept@yahoo.com

You might check recliner-handles.com

There would have to be something g keeping the mechanism from latching back. I would lean it on its backside and open and close it and see if something is keeping it from closing. Sometimes the lever activator interferes with it

@@the323vlog4 I have put them both on their sides. Side by side with view wide open of both - I can’t see the “lock” that keeps it close. I am looking for something out of alignment or bent. Can you show/tell me the last 5% of the locking motion. And what will keep it from staying locked

@@scottaumann7585 In my experience, most of them are spring loaded and as it gets closed its springs into place. This means there could be a spring issue or something prohibiting it from springing back into place such as the lever activator I mentioned. It may not have a lever activator depending on the style of handle the recliner has

It sounds like the mechanism could be bent. Have you checked with the store where it was purchased yet to see if they can order you a new mechanism ? They are very difficult tk successfully bend back to straight, so a full mechanism replacement is usually the best option

I’d be happy to look at it for you. Send video or pics to the323concept@yahoo.com

@@the323vlog4 Man! Awesome! Incredible response time! I'll send those over!

I’d check eBay or recliner-handles.com

I would imagine it’s possible to drill them out. Possibly a job for a machinist

You could try using a regular bolt/washer/nut. I haven’t seen a replacement rivet.

On the models I work on, I’ve never had anything that regulates where the back stops. What model is it?

Okay it's made in Vietnam it's brand name is standard furniture/ifm/2020.model# 416300V/ SKU# 4163951/ Batch# LJ416304150 I have the address for the company if you want it's in Alabama The back goes back all the way and doesn't stop: it comes up when you go forward it comes with you. Like the mechanism isn't connected.

That is typically a result of a customer leaning towards one arm when it’s in a home. I wonder if they had sold it and someone returned it? Either way, you can replace the foam core in the seat or sometimes you can just wedge some extra padding under the side that’s leaning and it levels out

@@the323vlog4 I was afraid that's what you would say, thanks

@@ravaginggoatman no problem

It definitely sounds like you have a bent mechanism. I would check with the store where you purchased it to see if it’s under warranty or if they can at least order the mechanism part for you

@@the323vlog4 Wow thank you for the quick reply. I did get a warranty that covers almost everything I paid extra for. They sent out a third party guy to look at it and he said he sees the problem and needs to authorize with the store and would come back. 2 days later they called and said the tech told them it was pet damage and so the warranty wouldn't cover it so they were scummy with that. I figured I would take a look since the other options ran out. Maybe I can get a new frame but I feel like cost might be too much *$1200 sectional so can't justify spending too much*

@@Andhy23 hmmm…seems like they could at least tell You what part you need and have you pay for the part of warranty is voided. I don’t see the correlation between bent mechanism and let damage though. Was there other damage on the recliner and maybe that was just aN Excuse?

@@the323vlog4 Yessir, it was a run around deal as not to have to pay for the repair. We don't even have a pet. Its the only thing the warranty didnt cover so they dismissed us. Thanks again for the responses! Subbed seeing as you've got a lot of interesting videos up.

@@Andhy23 much appreciated. I personally would try calling them again to see if they will let you order the mech out of pocket. It may be worth having a third party come out to look at jt though being as the mechs can get expensive ($200) the installation isn’t too bad. I believe I have a video of installing one. An experienced tech should be able to swap one out in less than an hour, probably even 30 minutes.

I would start by removing the back and inspecting the KD brackets where they connect to the mechanism and see if there are any issues there: the issue is more than likely with the mechanism itself. I would inspect the mechanism carefully and see where the pivot joints are that control the leaning back function and see if k could locate any noticeable issues

Where about are you located?

@@the323vlog4 Connecticut

@the323vlog4 I found someone who can fix it. Thank you though.

It’s usually spring loaded

@@the323vlog4 the recliner I have no longer locks in place, how do I fix it to stay in place? (is there a video I could refer to possibly?)

You can try bending it back. I’ve had luck using a pair of vice grips and a 2 lb hammer, but Other times, I’ve had to completely remove the mechanism, disassemble it, lay it flat on The ground and hammer it that way. That’s more work than replacing the whole mechanism if you’re able to locate it . I usually start with the store where it was purchased. In my experience they cost around $200.

I have used a lubricant called ez slip lubricant by mohawk before and it works very well for noises and emotion. Other than that, it sounds like the next step would be replacement. www.amazon.com/dp/B07V4GKQXR/ref=cm_sw_r_as_gl_api_glt_fabc_NGSBXC7SC3WC07XENTYW?linkCode=ml2&tag=the323concept-20

@@the323vlog4 it's beyond lubricant lol. It isn't bent, but a couple of the bushings are worn it. Do you know where one can get a mechanism?

@@Spoofaged I have seen a lot of mechanisms offered on a website called recliner handles before. You have to Google search it to get the exact web address.

I have occasionally seen this issue and could not find a resolution other than replacing the mechanism as a whole. It obviously has something to do with the added weight and pressure on the mechanism since the problem only occurs when sitting on it. Have you had the recliner for a while? It sounds like the mechanism is wearing out

Is it sitting how it would be regularly? For instance, If j try to push it back together with the recliner on its back, it won’t go In Properly. If it’s sitting in It’s upright regular position, it makes some sort of difference

@@the323vlog4 the chair is leaning far forward now and will not lean back. when chair is on its side, the recline function works normally

@@az34349 feel free to send a picture or video and I can help assess it

@@the323vlog4 will do so tomorrow in the daylight, thanks for helping

I now have video but don't see how to post it in a reply to you

Is it manual or electric?

@@the323vlog4 manual with lever

Some units are equipped with adjustable tension springs, otherwise, there’s not much adjustment to them

@@the323vlog4 Can you show me a photo of were that would be located? Can I add a spring somewhere or block it with something?

Unfortunately, I don’t have any photos of that issue. I can’t remover but I was thinking that lazyboy had the adjustable tension springs. It would be noticeable if you had them. Otherwise, it’s probably a faulty mechanism . I don’t ever come across that issue so I apologize I can’t be of more help with this one

I didn’t receive anything. Here is the email again just in case. The323concept@yahoo.com

Feel free to email me at the323concept@yahoo.com. Have you tried checking with the vendor or store where it was purchased?