Тёмный

Recreating My Endgame Keyboard 

Andy V Nguyen
Подписаться 41 тыс.
Просмотров 53 тыс.
50% 1

GIVEAWAY HAS ENDED
Cablemod store.cablemod.com/?ref=55823 code “KEEB20” for 20% off on custom USB cables.
I stream on Twitch ( / andyvnguyen ) on Tuesday at 5:30 PM PT and Saturday 10:00AM PT. I stream on RU-vid on Thursdays at 5:30PM PT.
Join this channel to get access to perks:
/ @andyvnguyen
Keyboard: E-White Tofu60 kbdfans.com/r?id=i9uofk
Board insulation: Paper towels
PCB: Merro60 PCB
keyspresso.ca/collections/pcb...
/ bulk_merro60_pcb_gummy...
Plate: kbdfans.com/products/carbon-f...
Keycaps: MG MCR Horseman www.monstargears.com/87/?idx=511
Switches: Gateron Ink V1 bit.ly/3z2YbKq (These are the only ones available right now)
Stabilizers: TX Stabilizers 1.6mm bit.ly/3yJ37my
Desk: Desk Haus desk with Apex Pro Max Legs and a 1.75" Walnut top. desk.haus/ code "WEENG" at checkout for 5% off!
Mat: black mat is randomfrankp x novelkeys topographic. felt mat is Keebmat keebmat.com/discount/ANDY code "ANDY" 5% off
Is my endgame really a Tofu?
Let me know what you think of the review in the comment section below!
Please help support the channel by using the affiliate links on this page:
www.andyvnguyen.com/affiliates
All of my keyboard part recommendations are in this page:
kit.co/andyvnguyen/keyboards
My keyboard commission page:
www.andyvnguyen.com/commissions​
Follow me on my social media platforms!
linktr.ee/andyvnguyen​
Join my Discord community:
/ discord
Recorded with:
Sony A7IV - kit.co/andyvnguyen/streaming/...
Sony 35mm F1.8 FE - kit.co/andyvnguyen/streaming/...
Sound recorded via Oktava MK012 Hypercardiod - www.frontendaudio.com/oktava-...

Наука

Опубликовано:

 

12 июл 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 166   
@AndyVNguyen
@AndyVNguyen 2 года назад
GIVEAWAY HERE: gleam.io/mLWfC/andy-v-nguyen-x-keebsgg-powered-by-cablemod Cablemod store.cablemod.com/?ref=55823 code “KEEB20” for 20% off on custom USB cables.
@dingleberry1242
@dingleberry1242 2 года назад
Lmao I remember Andy being mad people thought his unikorn as a e-yellow tofu and is now actually making a replica
@93ksj
@93ksj 2 года назад
wait, it’s not a Tofu?
@razer1158
@razer1158 2 года назад
@@93ksj Always hasn’t been.
@alexanderle3936
@alexanderle3936 2 года назад
@@razer1158 🔫
@TR-qf2gt
@TR-qf2gt Год назад
free content 🤷🏾🤷🏾
@poppygin4807
@poppygin4807 2 года назад
Here in my garage, just bought this new E-Yellow Korn and ended my keyboard game.But you know what I like more than Korn? TOFU KNOWLEDGE.
@IronCan88
@IronCan88 2 года назад
Haha I laughed when you said "you know what would make this end game keyboard" then pull out that cable mod.
@JonathanPolis
@JonathanPolis 2 года назад
Honestly Andy- I enjoy your content over most keyboard creators. Love a lot of creators- but just really enjoy your delivery…I learn a lot and I get to live vicariously through you in your keyboard life. So…thanks. Please keep going.
@justanotherpxrson
@justanotherpxrson 2 года назад
I am really happy you are still here, and I'm proud of you. You're doing great
@AndyVNguyen
@AndyVNguyen 2 года назад
Thank you so much ❤️
@orangejuice8987
@orangejuice8987 Год назад
Does anyone know what that yellow artisan keycaps is?
@mr6291
@mr6291 2 года назад
I'm not sure many know about the 60% flex PCB (solder) that exists and works with the Tofu 60 case.
@tamegaming1768
@tamegaming1768 2 года назад
I've gotten Durock V2s to work in my Bakeneko60, 65 and Portal65 by taking a belt sander to the screw housing side until it just shaved into the screw hole. It's a game of chicken because if you overcook it the screw hole pops out, but no more scratchy binding Cherry stabs makes it worth. The gummy o ring will be tighter, and in the case of my Kikkou I couldn't use Durock. I'll definitely look into the TX snap ins though.
@AndyVNguyen
@AndyVNguyen 2 года назад
You’re wild bro
@Ellie-jv4on
@Ellie-jv4on 2 года назад
I got screw in stabs to work by grinding notches in the side of the case wall at the 4 spots where to screws are located. So the O-ring has clearance inside of the case wall.
@SMKeyboards
@SMKeyboards 2 года назад
"G-string for plates"... ok Andy
@AndyVNguyen
@AndyVNguyen 2 года назад
But isn’t it tho
@SMKeyboards
@SMKeyboards 2 года назад
@@AndyVNguyen i'm not disagreeing...
@Raptor-ln2mr
@Raptor-ln2mr Год назад
The merro60 pcb is curretly sold out and I am wondering if u know when the merro60 will be back in stock. If it wont be put back in stock, are there any alternative pcbs that I can use for tofu60 gummy o-ring mount (preferably solderable and qmk and via compatible)?
@AndyVNguyen
@AndyVNguyen Год назад
I’m not merropcb vendor idk man. You can ask in the discord but I don’t know the alternatives
@sxnthwave
@sxnthwave 2 года назад
I almost never use those dome shaped bumpons. Just use cheap furniture anti slip pads from amazon. More surface area to contact the desk creates a better sound imo
@dupre7777
@dupre7777 Год назад
if i want the most clack and loud sound should i go with a carbon fiber plate or aluminium ? im new so im not sure thank you for your response (sorry for my bad english )
@AndyVNguyen
@AndyVNguyen Год назад
i would run aluminum!
@migsflicks
@migsflicks 2 года назад
Great video Andy! Kinda new to the hobby, so I was wondering how to find out the thickness of the PCB of something like a Keychron Q2? thanks
@migsflicks
@migsflicks 2 года назад
@@Hummus-dm6hc thank you!
@AndyVNguyen
@AndyVNguyen 2 года назад
Most keyboards are gonna be 1.6 unless otherwise stated
@migsflicks
@migsflicks 2 года назад
@@AndyVNguyen thank you!
@kennethfajardo3604
@kennethfajardo3604 Год назад
Hi can you help me decide on what plate to get alu, fr4, or carbon fiber? Will pair it with bcps on a soldered pcb
@AndyVNguyen
@AndyVNguyen Год назад
Depends on the board. But Id probably do alu.
@ViiiRALshortz
@ViiiRALshortz 2 года назад
that bakeneko is nice
@AndyVNguyen
@AndyVNguyen 2 года назад
Oh no is this how the next meme begins
@tunasu9182
@tunasu9182 2 года назад
i have a tofukorn and the only way to remove that signature tofu ping w/o compromising flex was to use polyfill or cotton balls but still newer tofu60 cases have a new usb cutout that makes contact with the dz60's usb port when assembled and that creates a small ping around the esc key area which pretty sucks because i cant find a workaround for that w/o drilling more holes in the case
@AndyVNguyen
@AndyVNguyen 2 года назад
Cotton huh? I'll try to add that in before sending it out! Thanks. Oof regarding the dz60 usb c port
@momok84
@momok84 2 года назад
if force break mod works for 2-piece alu cases, maybe you could try a variation of that on your usb hole or something to address the metal contact points which are causing ping
@tunasu9182
@tunasu9182 2 года назад
@@momok84 thanks, ill try to do it as soon as i can
@mr6291
@mr6291 2 года назад
I had to modify the usb port hole on my Tofu case. This helped with the ping issue I couldn't solve before. But then I realized you can get by without any case foam, etc. if you do the tape mod and wrap it up along the sides to fill the gap between the PCB and plate. Currently, I'm using a solder-able flex cut 60% PCB that works perfeclty in the Tofu 60. Using a light layer of tape (trimmed where the flex cuts are) and some polyfill. The flex is unreal and the sound is very pleasing.
@Raptor-ln2mr
@Raptor-ln2mr Год назад
is the usb-c cutout big enough for the PCB to move up and down freely?
@AndyVNguyen
@AndyVNguyen Год назад
It’s pretty big
@GorKeys
@GorKeys 9 месяцев назад
For some reason, the meme cutted carbon fiber plate sounds deep...
@Raptor-ln2mr
@Raptor-ln2mr Год назад
Did you have any issues with the gummy o ring being unable to make contact with the sides of the case? I am using the acrylic tofu case with a bakaneko 60 o ring.
@Fezz21
@Fezz21 2 года назад
That's odd, I have the tofu65 and it has a weight on the bottom. Makes it sound better for sure, even with the bump ons.
@AndyVNguyen
@AndyVNguyen 2 года назад
yeah the 65 has the thin 'kind of' weight haha. but yes it does help
@Fezz21
@Fezz21 2 года назад
@@AndyVNguyen oh damn did not know that! I guess the 65 is the only one that came with the weight
@huybach1609
@huybach1609 Год назад
nah, i want to see full stream buil this board in twitch but can not find :((
@AndyVNguyen
@AndyVNguyen Год назад
sorry i haven't been uploading my full streams
@saqif200
@saqif200 Год назад
Those bump on feet idk what it is made my kbd67 lite sound awful too as soon as I took them off it sounds so so good!
@AndyVNguyen
@AndyVNguyen Год назад
yeah the feet are too tall imo
@REZY_
@REZY_ 2 года назад
"Yo mama said we had one at home" LMAO
@AndyVNguyen
@AndyVNguyen 2 года назад
Glad someone caught it LOL
@ericxueAAA
@ericxueAAA Год назад
Oh man, if tofu 60 is the endgame keyboard, I should have been ended my game two years ago. After tofu, my second keyboard was Pixel Studio TKL, top mount, spent $420 for an extra after GB, because I liked the retro design, but I had no idea what is top mount, no DB for that keyboard, I could feel the stiffness as my tofu 60. Now I am looking for a good soft 65% or 70%, but I feel the TKL is getting popular now. I believe because most studios have made their 60% and hesitated to make R2 version, that makes the TKL more and more popular because of the market potential.
@AndyVNguyen
@AndyVNguyen Год назад
i do think TKL is coming back strong in 2022. 60% is def more niche.
@ericxueAAA
@ericxueAAA Год назад
@@AndyVNguyen Thank you for sharing your opinion, I just pre ordered a Tiger lite because your video haha. That will be my first gasket mount keyboard, I want to try something different like soft typing experience before I invest a high end keyboard.
@AndyVNguyen
@AndyVNguyen Год назад
Oh the Tiger 80 lite has a perfect soft typing experience that doesn’t get overdone
@noanimal
@noanimal 2 года назад
What did you mean when you said that Staebies need modding? In my experience both staebies and tx stabs are great with 205g0 on housing and minimal xht bdz on wires
@AndyVNguyen
@AndyVNguyen 2 года назад
There’s a few people that reported you had to keep screws a little loose, balance wires, etc. they wrote up full guides as to how to mod em
@AlexMcDermott
@AlexMcDermott 2 года назад
@@AndyVNguyen would you recommend against xht bdz on the TX stabs?
@AndyVNguyen
@AndyVNguyen 2 года назад
It’s fine I’ve done it. I just don’t see a benefit over 205g0
@AlexMcDermott
@AlexMcDermott 2 года назад
@@AndyVNguyen oh okay, doesn’t it just stay in place a bit better long term and not leak out the bottom?
@AndyVNguyen
@AndyVNguyen 2 года назад
Sooner or later they both do the same thing if you’re plugging the butt. If it’s a light application for both I don’t get it on my pcb
@bigdasu83
@bigdasu83 Год назад
I feel like the tofu needs a refresh to be purely gummy O ring mount and have the standoff removed. They have the DZ60 flex pcb to go with so it would make sense IMO.
@AndyVNguyen
@AndyVNguyen Год назад
that middle standoff def gets in the way
@oscarsanchez298
@oscarsanchez298 Год назад
There is finally a refresh, and they did not the gummy o-ring way. It now has three different mounting styles. And gummy aint one :(
@bigdasu83
@bigdasu83 Год назад
@@oscarsanchez298 Yes. Saw that shortly after this comment lol. Was really cool to see an update to the line that has been pretty much an icon of this hobby for such a long time.
@RicardoStumpf2007
@RicardoStumpf2007 2 года назад
Why is this guy rebuild his e yellow tofu in white?
@AndyVNguyen
@AndyVNguyen 2 года назад
Because we ran out of yellow paint
@garyfeng7308
@garyfeng7308 2 года назад
I hope one day I can get an e-yellow tofu. BTW where did you purchase that deskmat? :P
@AndyVNguyen
@AndyVNguyen 2 года назад
Link in desc!
@93ksj
@93ksj 2 года назад
The “kinda”corn 🔥
@ee1yd
@ee1yd 2 года назад
Still like the angles of the tofu, one of the reasons it was my first keeb back in the day
@AndyVNguyen
@AndyVNguyen 2 года назад
very clean sharp edges for sure !
@Raptor-ln2mr
@Raptor-ln2mr Год назад
Is the merro 60 pcb via and qmk compatible?
@AndyVNguyen
@AndyVNguyen Год назад
Yes
@Xiong97
@Xiong97 2 года назад
Hello andy may i know the spec for the o ring?
@AndyVNguyen
@AndyVNguyen 2 года назад
50a
@Raptor-ln2mr
@Raptor-ln2mr Год назад
what is the thickness of the merro 60 pcb?
@AndyVNguyen
@AndyVNguyen Год назад
1.6
@nobodyplays6270
@nobodyplays6270 2 года назад
I actually bought a brass weight off Amazon and put it where the battery would go as well as some pennies and that took away the majority if not all of the ping
@ImOnMy116
@ImOnMy116 2 года назад
Are you able to link the product or the description on amazon? my efforts to find it are failing me
@nobodyplays6270
@nobodyplays6270 2 года назад
@@ImOnMy116 just search up 1/8th inch brass bar should pop up
@ImOnMy116
@ImOnMy116 2 года назад
@@nobodyplays6270 awesome, thank you very much!!
@nobodyplays6270
@nobodyplays6270 2 года назад
@@ImOnMy116 no problem
@SuperKMao
@SuperKMao 2 года назад
Yo this vid is fresh.
@triedge6200
@triedge6200 2 года назад
6:30 i feel yah house burned down last year still in a rental and this hobby has really brought lots of joy kept my mind off the whole ordeal
@AndyVNguyen
@AndyVNguyen 2 года назад
damn dude I'm sorry to hear. glad you find a safe space to get your mind off of things
@triedge6200
@triedge6200 2 года назад
@@AndyVNguyen ❤️Appreciate it Man. Thanks for all the vids and inspiring my quest to find my own Unikorn🦄, i mean tofu 🤡. Cheers 🥂 to more Great vids yet to come 🤛🏼
@jenkmeier2406
@jenkmeier2406 Год назад
awesome comparison
@AndyVNguyen
@AndyVNguyen Год назад
thanks!
@HoveKB
@HoveKB 2 года назад
I wouoldn't even waste a merro pcb kit on a Tofu 60. lol I used it on my Fjell instead XD
@AndyVNguyen
@AndyVNguyen 2 года назад
hahaha tru.. I remember me doing the photo in the fjell there was a bit of metallic sound too. how did yours turn out
@ethanjeong2040
@ethanjeong2040 2 года назад
Nice E-Yellow tofu
@guy5140
@guy5140 2 года назад
Where did you get the PCB?
@AndyVNguyen
@AndyVNguyen 2 года назад
There’s a current buy on r/mm and it might have some linked vendors that have it instock. I’ll add links to desc
@gavin5275
@gavin5275 2 года назад
are you using a 50a gummy oring?
@AndyVNguyen
@AndyVNguyen 2 года назад
yes
@bungo7891
@bungo7891 2 года назад
gotta tempest mod it
@thekeyboardguy9292
@thekeyboardguy9292 2 года назад
what is the best budget keyboard?
@AndyVNguyen
@AndyVNguyen 2 года назад
i thought you're the keyboard guy
@thekeyboardguy9292
@thekeyboardguy9292 2 года назад
@@AndyVNguyen guy who loves keyboards
@conutux722
@conutux722 2 года назад
@@thekeyboardguy9292 P R E F E R E N C E
@kobb4467
@kobb4467 2 года назад
Sick ewhite Korn, bro
@AndyVNguyen
@AndyVNguyen 2 года назад
wait a second..
@ejbock5b179
@ejbock5b179 Год назад
Is this board still possible? or is everything sold out
@AndyVNguyen
@AndyVNguyen Год назад
you can buy a tofu anytime usually
@ejbock5b179
@ejbock5b179 Год назад
@@AndyVNguyen what about the pcb required tho?
@AndyVNguyen
@AndyVNguyen Год назад
Oh.. yeah.. uh.. just buy a bakeneko lol
@CMLXMNDXv
@CMLXMNDXv 2 года назад
Andy is happy! That’s all I care about. That my giveaway prize.
@AndyVNguyen
@AndyVNguyen 2 года назад
Warmed my heart 💜
@OOOOOOOOO321
@OOOOOOOOO321 2 года назад
Dope looks great
@AndyVNguyen
@AndyVNguyen 2 года назад
thank you so much!
@fabes9500
@fabes9500 2 года назад
🌽 battle: white corn vs yellow corn... What a sound porn 👍🏻
@AndyVNguyen
@AndyVNguyen 2 года назад
LMAO
@brando_100
@brando_100 2 года назад
You just accidentally did a noctua theme build
@AndyVNguyen
@AndyVNguyen 2 года назад
sheesh it'll match my noctua themed pc
@-N3oS-
@-N3oS- 2 года назад
You could say its a Tofukorn now
@AndyVNguyen
@AndyVNguyen 2 года назад
TOFUKORRRNNNN
@herculesng1090
@herculesng1090 2 года назад
Wow, I never thought you would get the Unikorn R3.69
@AndyVNguyen
@AndyVNguyen 2 года назад
it's 1 of 1000 doncha kno
@jmoon3119
@jmoon3119 2 года назад
great vid!
@bigbenmk4873
@bigbenmk4873 2 года назад
W vid as always andy
@AndyVNguyen
@AndyVNguyen 2 года назад
thank you Ben!
@JakeMMC
@JakeMMC 2 года назад
Missed opportunity not using an e yellow. Maybe you would get it confused with your korn
@AndyVNguyen
@AndyVNguyen 2 года назад
I’m actually crying inside for not buying it earlier. Had this whole plan to swap it on stream to see if people would notice.
@JakeMMC
@JakeMMC 2 года назад
@@AndyVNguyen only give away would be the fillet with an overhead
@lilrowbear
@lilrowbear 2 года назад
Why go through all these steps to make the Tofu into an o-ring mount instead of just getting a Bakeneko from Cannonkeys?
@AndyVNguyen
@AndyVNguyen 2 года назад
Better finish on the case is the only reason Bakeneko way more straightforward though lol
@yannikau.5331
@yannikau.5331 Год назад
uff the tofu imo sounds hollow and lifeless
@rahmaniastrid
@rahmaniastrid 2 года назад
nice lets goo budget corn
@AndyVNguyen
@AndyVNguyen 2 года назад
double serving of corn, plz!
@rickymartin181
@rickymartin181 2 года назад
Yooo that does sound good…🤩
@AndyVNguyen
@AndyVNguyen 2 года назад
It’s not too shabby tbh. Just needs a little tuneup!
@ceementality
@ceementality Год назад
Any other pcbs that work merro is sold out
@hoanganhle3777
@hoanganhle3777 2 года назад
Endgame hơi nhiều rồi đó anh trai =)))
@Aeroskiii
@Aeroskiii 2 года назад
Make a brass weight for it
@AndyVNguyen
@AndyVNguyen 2 года назад
I don’t know how to make something out of metal lol
@Aeroskiii
@Aeroskiii 2 года назад
@@AndyVNguyen you can get one cut just take the measurements
@TROY-MCCLURE-1991
@TROY-MCCLURE-1991 2 года назад
Damn this hobby is kinda high maintenance. I don't know why I'm still in it :|
@AndyVNguyen
@AndyVNguyen 2 года назад
To watch my stupid videos while eating breakfast
@keagan5379
@keagan5379 2 года назад
weeng nation forever bb!
@AndyVNguyen
@AndyVNguyen 2 года назад
WEENG GANGGGG
@wewewswswsw123
@wewewswswsw123 2 года назад
David Goated
@AndyVNguyen
@AndyVNguyen 2 года назад
daVID #1
@wanabdulhadi1268
@wanabdulhadi1268 2 года назад
Hoping to get that korn at r3..or was it r4..
@AndyVNguyen
@AndyVNguyen 2 года назад
Lmao I think it’s 3. It’s the 4th release tho. R1, r2, smol change r2.1, now r3
@xxxgabaxxx
@xxxgabaxxx 2 года назад
Wait, you have a soldered board in 2022? C'mon
@AndyVNguyen
@AndyVNguyen 2 года назад
Not sure what this means
@braedynkaplanvlogs7993
@braedynkaplanvlogs7993 2 года назад
nice tofu
@AndyVNguyen
@AndyVNguyen 2 года назад
It’s the best tofu
@fenderjbass6463
@fenderjbass6463 2 года назад
split backspace >
@AndyVNguyen
@AndyVNguyen 2 года назад
Agreege
@Seenana_blythe
@Seenana_blythe 2 года назад
nice
@scantrawn4096
@scantrawn4096 2 года назад
Tfue Cable Poggers
@AndyVNguyen
@AndyVNguyen 2 года назад
#1 fork knighter
@kianisntcool
@kianisntcool 2 года назад
Hiya Andy (;
@AndyVNguyen
@AndyVNguyen 2 года назад
hi kian
@bananaboy1026
@bananaboy1026 2 года назад
Yoooo first
@AndyVNguyen
@AndyVNguyen 2 года назад
congrats
@joer1502
@joer1502 2 года назад
Ban Dro
@AndyVNguyen
@AndyVNguyen 2 года назад
You already kno
@joer1502
@joer1502 2 года назад
@@AndyVNguyen kekw
@Nateabolic
@Nateabolic 2 года назад
Powder coat Bakeneko60
@AndyVNguyen
@AndyVNguyen 2 года назад
I want to request yellow powder coat
@Nateabolic
@Nateabolic 2 года назад
@@AndyVNguyen my next build will be an orange powder coated bakeneko60. I have the 65 right now in CNC Navy
Далее
this endgame keyboard brought me back to my addiction
17:06
The New Tofu 2.0 Keyboard Is Too Good
7:33
Просмотров 85 тыс.
#kikakim
00:31
Просмотров 10 млн
I Built My Dream Keyboard from Absolute Scratch
21:52
Просмотров 390 тыс.
"Tech that let me down" Special 3
10:57
Просмотров 247 тыс.
Bakeneko65: Yo Dawg, Heard You Like Sound Tests
10:31
Просмотров 108 тыс.
Xbox 360 is DEAD... BUT IT'S WORSE THAN WE THOUGHT
13:42
A Custom Patinaed Unikorn
12:56
Просмотров 20 тыс.
taking my keyboard to work
12:17
Просмотров 2,2 млн
Is This the Perfect Custom Keyboard?
29:39
Просмотров 298 тыс.
Tofu60 2.0 Review: Just One Thing!
6:40
Просмотров 11 тыс.
I upgraded my $300 keyboard EVEN MORE
7:51
Просмотров 193 тыс.
ЗАБЫТЫЙ IPHONE 😳
0:31
Просмотров 20 тыс.
$1 vs $100,000 Slow Motion Camera!
0:44
Просмотров 28 млн