Тёмный
No video :(

Recycled Bell from Old Tanks 

SimonSaysDIY
Подписаться 122 тыс.
Просмотров 16 тыс.
50% 1

In this video, I will be showing how to make a bell out of old tanks. Check out this video to see how this can be done!
MAKE SURE THE TANK IS EMPTY BEFORE MAKING ONE!
Support my Channel on Patreon at - www.patreon.co...
And get access to Shoutout, Giveaways, and much more.
Follow me on Instagram and Facebook for more content.
Instagram: Simon_Says_DIY
Facebook: Simon Says DIY
Please do not attempt the processes in this video without adequate training and equipment. Proceed at your own risk. While we have made every attempt to ensure that the information contained on the video channel is correct, the Creator is not responsible for any errors, or for the results obtained from the use of this information. In no event will the Creator be liable to you or anyone else for any decision made or action taken in reliance on the information on the video channel, or for any consequential, special or similar damages, even if advised of the possibility of such damages. Seek professional assistance should you require it. Please stay safe and be careful.
#SimonSaysDIY #Metalworking #Recycled

Опубликовано:

 

26 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 27   
@Mail4marc
@Mail4marc 3 месяца назад
Well done! I would have rooted around for some old metal chain instead of the hardware store lamp chain. Thanks for the upload!
@SimonSaysDIY
@SimonSaysDIY 2 месяца назад
Thanks! 😊
@Pinoyphilly
@Pinoyphilly 2 года назад
hank you for this great idea. I have an almost empty nitrogen tank and it be like this project you just did. Thanks.
@SimonSaysDIY
@SimonSaysDIY 2 года назад
Glad it was helpful! Good luck on making yours :)
@donhall960
@donhall960 2 месяца назад
how did you choose the length ? and why did you cut the valve instead of unscrewing it ?
@stripeddman1
@stripeddman1 9 месяцев назад
good work
@karaokenglish
@karaokenglish 21 день назад
What type of wheel are you using on your grinder to finish the surface?
@SimonSaysDIY
@SimonSaysDIY 15 часов назад
It’s called a flap disk. It’s made to quickly sand down surfaces. I have attach a link to the one I used. www.lowes.com/pd/DEWALT-Zirconia-4-5-in-36-Grit-Flap-Disc/1207167
@karaokenglish
@karaokenglish 14 часов назад
@@SimonSaysDIY thank you so much for taking the time to respond 🙏
@taoshum
@taoshum 2 года назад
If you cut vertical slots into the bell from the bottom to the point where it starts to neck down, you'll get a much deeper/pleasant sound.
@SimonSaysDIY
@SimonSaysDIY 2 года назад
Thanks! 😁
@bibson1405
@bibson1405 Год назад
Would love to see an example of this technique? Or at least how the sound differs
@julielehman8883
@julielehman8883 11 месяцев назад
Very nice! Do you sell them?
@user-em6ie2be7x
@user-em6ie2be7x 2 года назад
Love the background music, What is that song? 🎵
@elkrice
@elkrice 11 месяцев назад
You really need a drop cut saw
@mayageorge1847
@mayageorge1847 2 года назад
This is very attractive but your first instruction should be with regard to the health and safety of this potentially toxic, dangerous and even fatal endeavor. Even if cylinders are empty, dependent on the chemical, exposure to as well as heating the cylinder could have deadly effects. Compressed gases can expose users to both short and long term chemical and physical hazards. Gases contained within cylinders can be toxic, flammable, oxidizing, corrosive, inert, or a combination of these hazards. Because the pressurized chemical is released in gaseous form, a leak from the cylinder, or chemical trapped in the neck near the regulator, or any part of the system used to deliver the gas can quickly contaminate a large area. Therefore, it is necessary to be familiar with the chemical hazards of the gas and possibility of asphyxiation. In addition to the chemical hazards, there are hazards from the gas pressure and the physical weight of the cylinder. The cylinder can itself become a dangerous propelled object if it is damaged, cut or broken. Appropriate care in the handling and storage of compressed gas cylinders is essential even if it is labeled non toxic. The toxic effects of stored gases can also be impacted by heating, even if they are labeled non-toxic, heat or exposure to oxygen can change that. Even though a tank should only be refilled with the same gas it is not guaranteed once it is discarded, especially if the tank is very old. Please encourage your viewers to be extremely cautious, do their research as to what tanks could potentially be used, and to be experts in their handyperson capabilities before modifying chemical cylinders. Also, they should have a separate, professional space to attempt this. Many garage and house fires and explosions are a result of improperly stored and modified chemical tanks. I really love this idea but it 100% requires a hazard warning. Please and thank you.
@G.S.W.SewmesomeMusic
@G.S.W.SewmesomeMusic 2 года назад
I was going to go there but your on it good job! Bell may not be the only thing ringing!
@mayageorge1847
@mayageorge1847 2 года назад
@@G.S.W.SewmesomeMusic I really do love it
@SimonSaysDIY
@SimonSaysDIY 2 года назад
Thank you so much! I really appreciate the incite. Thankfully I checked and this particular tank was only used for CO2 which is not flammable and is relatively safe. I drained all of the pressure outside of the building and left the valve open while cutting to relieve any additional pressure from the tank heating up. I will add to the description of the video mentioning the caution and research needed to attempt this project! Thanks again! :)
@kylehartwig9398
@kylehartwig9398 Год назад
Stop the dumbness
@kylehartwig9398
@kylehartwig9398 Год назад
Stop the dumbness
@viewer7200
@viewer7200 Год назад
let it ring longer. your clapper obstructs the vibration
@clayhill7601
@clayhill7601 7 месяцев назад
Bro eight threads out
@SimonSaysDIY
@SimonSaysDIY 7 месяцев назад
Thanks!
Далее
DIY Cylinder Tank Bell / Wind Chime and Forged Hanger
14:15
Make Your Own Wind Chimes - The Great Outdoors
5:08
Просмотров 191 тыс.
Carving Elephant😍🐘| wood Elephant
9:56
Bottle Bells Bells Made From Gas Cylinders
14:02
Просмотров 10 тыс.
Theta Chimes Supergiant Wind Chime
4:36
Просмотров 77 тыс.
DIY Bell
0:40
Просмотров 7 тыс.
How to make Wind Chimes (that sound really good)
16:52
Просмотров 706 тыс.
Transforming Oxygen Tanks into Artistic Bells
2:22
Просмотров 52 тыс.
How to Make Tubular Bell Wind Chimes by Lee Hite
27:24
Просмотров 343 тыс.