Redcat Ascent 18 Overdrive! Angled Skid & More FREE mods!

Подписаться 27 тыс.

Просмотров 5 тыс.

50% 1

Checking out the new Over/Underdrive gears for the Ascent 18! Making some free mods like an angled skid?! Lets go!
Redcat Ascent 1/18 found here
www.redcatracing.com/?ref=dSM...
Redcat Ascent 18 found here at amainhobbies
bit.ly/3IzpUGo
Redcat Over/Underdrive gears found here
www.redcatracing.com/products...
Wheels I’m running found here
amzn.to/4cdFWDA
Tires I’m running found here
bit.ly/47aH8EB
Tungsten Putty Weight found here
amzn.to/3VotdIj
Injora ESC found here
amzn.to/49Tzsbz
2s Lipo I’m using found here
amzn.to/3Pl4n8c
Flysky GT5 found here
www.amazon.com/dp/B0CKWVVRCR/...
Micro receiver for Flysky GT5 found here
www.ebay.com/itm/224471092093...
DumboRc transmitter found here
amzn.to/3IGb4hq
Micro receiver for DumboRc found here
www.ebay.com/itm/284455211536...
Redcat site for upgrade parts here
www.redcatracing.com/?ref=dSM...
M2 screw kit I used found here
amzn.to/4c5hILM
I finally have Merch!!
Be sure to check the sizing chart and maybe size up on those Hoodies.
Check it out at the website below!!
2fm-rc-shop.fourthwall.com/co...
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/4fwem
FMS Affiliate link here
www.fmshobby.com/jsVeIxtdZHBb...
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref=FaSRjm2T
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~

Развлечения

Опубликовано:

24 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 74

@Slaters_RC 3 месяца назад

I moved my entire skid up one hole so it’s flush with the chassis now.

@2fmrc 3 месяца назад

That may be the best move honestly. I thought about doing that when I angled mine.

@QuinnsRC 3 месяца назад

Mine gets here today! I ordered the inner/outer brass portal covers just to see how adding a bit of weight will help. I'm always looking forward to the imagination you apply to the trucks.

@mikerainey3847 3 месяца назад

Nice work Matt! Waiting on a few upgrades for mine, then I'll dive in with both feet! As always, great content!

@Mike_Westervelt 3 месяца назад

I'm running the fms 2n1 with the smaller fms 380mah batteries. The fms esc has a better bec and runs more quietly. I'm able to mount the small batteries in the front of the chassis. This weight shift has made a huge difference.

@MrsRabbit8 2 месяца назад

Had to watch this again, need some Asc18 content! 😂😅😂😅 I'm wondering about making room for the servo and dropping this thing down a bit more. I know you did one already, just wondering if there are more chassis rail options, and if you ever tried to mess around again with altering the stock chassis rails for those who dont want to buy new rails. Also trying different shock options, working on a more overall lightweight option for the rig, and chopping this thing down to be like the 1/10 Asc Fusion. 😊 The ones i saw on FB were chopped kindof crappy. Guess I'm just bored and waiting for more of your content. Hehehe

@GarcBomber 3 месяца назад

Just picked up one of these for the kids to putz around with, have a feeling I’m naturally going to continuously improve. Thanks for the tips and keep up the good channel work 👍🏼

@jeffmackovitch9987 3 месяца назад

I have to wait to get mine for budgetary reasons but I’m looking forward to getting mine! Great video!

@ciborg86 3 месяца назад

I have some tungsten putty on the bench. Will try that out. May put some in the sliders too. Thanks!

@zeroshelfqueens 3 месяца назад

Diggin the free mod videos! My new 2fmRc t-shirt showed up and looks n feels great after washing the Carolina off😂 Go Vols!

@2fmrc 3 месяца назад

Haha! Nice! Glad it worked out well

@robertmaclachlan485 2 месяца назад

Relocated shocks - best mod yet

@theSkavenger84 3 месяца назад

I’m shocked at how capable this truck is right out of the box. I’m not a Redcat Fan, but this truck is sweet. I may get another one to do mods to

@gibsonlife573 3 месяца назад

Play I do that little spacer trick on the transmission on any of them that are like really angled I got that from you thank you brother

@wingnutbert9685 3 месяца назад

Great vid Matt! Impressive difference for sure. The putty is interesting. And one can always go with lead solder or fishing weights and cut and hammer them into any size and shape needed. ???- I wonder how much more angle you could get with a centered limiter elastic on the front?

@2fmrc 3 месяца назад

Yeah I was going to play with limiting it a bit. It will definitely get 60 with some limit straps

@GeezerGramps 3 месяца назад

I De-cased my esc & moved it to the front tray this & 14g on top of the servo gave me 53% front. The esc is Conformal coated but I gave it another good coat paying attention to the edges, didn’t cover the switch. You free modded truck crawls much better.

@keldonator 3 месяца назад

Tungsten putty is a great idea. Wish they had a kit version, I don't want any those electronics. Probably just wait for aftermarket everything, but those axles look durable

@joshhoward8822 21 день назад

Wheel weights from Harbor Freight work great for weight , they have tape on one side for sticking to the body and you get like 50 in a pack for $7 dollars . And they are small and flat but heavy . Best buck for weight

@2fmrc 21 день назад

Yeah I’ve ran those on 1/10s quite a bit. Just kinda bulky and ugly lol

@charlieshankles 3 месяца назад

Great update to this platform. I drove it and my rock van last weekend. Honestly I still like the rock van better. Would be a good comparison because they are about the same price

@cak5171 2 месяца назад

I was torn between both of those trucks

@SPAMurai671 3 месяца назад

great content!

@2fmrc 3 месяца назад

Thanks!

@Steve_J81 3 месяца назад

I'm really hoping one of the after market companies already have one and are working on diff gears 6%od portal gears in the front with 20%ud in the rear would be perfect.

@gibsonlife573 3 месяца назад

Treal it's still my favorite portal axle I know it's scx24 but man they're just Bulletproof

@gibsonlife573 3 месяца назад

Hey that's what I did to my axles I put it right on top of the axles right on the inside of the

@dukesrc3163 3 месяца назад

Kinda hungry for an orange 🍊 for some odd reason wink wink 😂

@wingnutbert9685 3 месяца назад

😅😊👍

@jesussarabia1121 Месяц назад

Can you put the links to buy the same things you have. It's awesome 💯😎 I want to make mine like yours

@iramirez95020 3 месяца назад

You could also pick up some stick on wheel weights and stack them, super cheap. O'Reilly's has them in stock.

@2fmrc 3 месяца назад

Yeah I have a ton of those I used to put in all my 1/10 wheels lol. I’ve even slapped them on the servos in these things before. Pretty cheap at harbor freight also

@georgerobert86 3 месяца назад

I wish the gears were in stock!

@annasoming 3 месяца назад

great! i've been talking tungsten putty for a long time while others were doing the 1/4oz wheel weights. I have a ridgerock and its got empty space in its axle housing and tungsten can fill it in better. how's the drag break? i can't tell if its falling back or if you're reversing. even with the new wheels and tires, it still looks too tall. do you think shorter shocks would be good? it would also prevent from unloading on up/down hills

@2fmrc 3 месяца назад

Maybe slightly better than stock on the drag brake. Not 100% hold but pretty good imo

@DTW-bx2vy 3 месяца назад

Have you found any shock springs that fit the Ascent 18 shocks? The stock shock springs are a bit stiff & I have been trying to find something that will work & are far softer to get better articulation out of the suspension.

@dsbm8781 3 месяца назад

Anyone else have trouble with the lower socket on the shock breaking during upgrades? 3 out of 4 broke on mine.. Kinda bummed i had to order another set, but there's no easy way to use any aftermarket shocks...

@PleasureAfterWorkRcCrawlers 3 месяца назад

First thing in my mind now was: are the portal gears compatible with the FCX24 portal gears ?

@2fmrc 3 месяца назад

No. I tried lol

@user-qf3qj6qx8u 3 месяца назад

Is that the new Furitek cayman pro v2 in the back ground? If it is when you doing the review? I have one on order.

@2fmrc 3 месяца назад

They had said they were gonna change the gearing possibly and get back with me cause mine was a little rough. Haven’t heard anything else yet about it. My servo also died so I gotta swap it out before I can run it lol

@user-qf3qj6qx8u 3 месяца назад

Thanks for the reply.

@Bucky5068 3 месяца назад

I put copper BBs in my sliders. Thoughts?

@2fmrc 3 месяца назад

It’ll work! Probably not a bad idea

@gibsonlife573 3 месяца назад

Only 12% that's a little bit but in my opinion you want to be up closer to 30 what is the same time you can cause problems with that much too so maybe like a 23% better

@MrsRabbit8 3 месяца назад

Hey matt, do you know the gear ratio of the transmission of the Ascent 18? Thank you

@2fmrc 3 месяца назад

I don’t honestly

@MrsRabbit8 2 месяца назад

Go check out the over/under-drive gears by injora for the TRX4M, they show stock, over, and under options for ratios. Same trans as the Asc18.

@2fmrc 2 месяца назад

@@MrsRabbit8 not the same exact transmission. A couple gears will work but I don’t think all of them will swap. I swapped a couple Trx4m gears into one of mine at one point but it just didn’t run as smooth to me.

@MrsRabbit8 2 месяца назад

@@2fmrc auh okay, i had heard speculation and claims, yet nothing definitive. Thank you. Hope to see more on this rig!

@brandonfender1086 3 месяца назад

When will the over/under drive gears be available to purchase?

@2fmrc 2 месяца назад

Supposed to be first of April

@brandonfender1086 2 месяца назад

@@2fmrc I sure hope so. If they don't, see if you can get a set and I'll give you a new mailing address to have them ship them to haha

@robertsuber7596 2 месяца назад

Who makes the over/underdrive gears

@ellisb1451 3 месяца назад

Anyone having issues with the body staying on?

@Bucky5068 3 месяца назад

Only when my 5 year old touches it 😂

@jakobscarbrough8038 3 месяца назад

Just wondering but how does the angled skid help?

@2fmrc 3 месяца назад

It’s called a break over point where once you sort of launch the front of the truck up over a sharp edge or tough obstacle the rear will kinda slide down or over it. A lot of chassis’s now are putting some insane angles on the skid because it does actually work pretty well. It’s not near as important on these 1/18s and 1/24s as it is in 1/10 imo because there’s not as much material there on the skid to hang up.

@jakobscarbrough8038 3 месяца назад

@@2fmrc ok