Refill Brother TN223 TN227 TN243 TN253 TN247 TN257 Toner Cartridge 

This has to be the best tutorial I have every seen. The camera angles are just perfect 👌. Thank you !

It's a good thing they didn't make it too complicated.

worked perfectly for my tn227, needed to watch the reset gear 10 times to get it

Superb.. My issue got resolved.. Thanks a ton

This is exactly what I needed, thank you.

You are awesome! Saved my ass, thank you so much!

This worked perfect on my TN-221 for an emergency hack at 11pm so I could finish printing

Thank you very much. Very well explained

Thanks for your video easy to follow. however the replacement cartridges that we have for MFC-L3770CDW does not have a reset gear and now the printer will not recognize the cartridge. Our Black cartridge is the only one with a reset gear. The C/M/Y Cartridges do not have the reset gear as mentioned above. I have already reset the tone more than once and now it won't reset. Each cartridge feels and shows that there is more life them. Please help us figure out a fix besides needing to replace each cartridge. I did notice that after a short research the new TN227 C/M/Y series when buying new do not have the reset gear on them. If we need to replace C/M/Y which series of cartridges do we need to purchase so we can have a reset gear.

very very thank you

Thank you very much for detailed instructions. I lost the small gear ( not the reset gear)while filling the cartridge.Is there any way to replace it? Thanks

Thanks for the clear and good video. One question - you say 90g for black and 70g for colour. But is this for a 243 or 247 cartridge? How much for 243 and how much for 247? If you fill a 243 with a load for a 247, the counter will say it's empty way before it is. Thanks.

What are the main differences between TN223(latest printers) and TN221(older printers) cartridges? Would it be beneficial to upgrade an old Brother printer with TN221 cartridges to a new printer with TN223? Thank you.

EXCELLENT video!! Just one item to make it better, do you have a recommended webpage to get the replacement toner? Thanks again!!!!

Thanks alot very detailed instruction Can you advised which type of refill powder we use it

What firmware version do you have in the HL-L3210 unit? Mine was shipped with a very recent version (1.22, issued in 2019), does the refill works without replacing the chip on a 1.22 firmware unit too? Thanks!

Once the reset gear is positioned as shown do you have to rotate it by hand 180 degrees? The video does not show how it is being rotated.

Hello Is it a similar/same process for TN-253 and TN-257 as to what is seek in the video? They haven’t been mentioned in your comments thread nor could I find a video on them within your video library. Any assistance would be appreciated.

This printer claims 2400x600dpi is this really so how does it compare to a minolta magicolor, have 2530DL that I can't get transfer belt anymore, would this printer have same print quality as my old minolta? Does it print on glossy paper?

so we can keep the old chip on the old cartridge with the refilled toner?

Thank you very much ,Can I use the black refill toner powder for brother TN450 in this printer?It is cheaper

Do you have a link how to disaamsemble brother Mfc 9330cdw scanner glass? To clean the mold and lamp inside

Can a used cartridge be resused to refill with white toner? Suppose we clean it like in the video, can it be rinsed with water to ensure all black toner is removed or will it ruined the cartridge?

Hello, can i put TN-261 catrige wrk in place of TN-263 or TN-267 in dcp l3551 cdw plz suggest me

I noticed you stated the Starter Cartridges do not have the reset gear. Can you still refill them or will the printer not function?

Would this work for a tn-248. The black cardridge in my new printer was already empty after 256 pages. Looking for a way to reset it.

Grazie per la guida, arrivo qui perchè il metodo di reset illustrato sul video "Resettaggio Cartuccia Toner Brother MFC-3700 TN243 TN247" non funziona più dopo l'aggiornamento del firmware, e io da pollo ho lasciato la stampante aggiornare il firmware. Dato il mio modello (DCP-L3550CDW) ha toner senza quell'ingranaggio, che alternative ci sono per continuare ad utilizzare i toner installati? Grazie.

Can I use methylated spirit for cleaning rollers?

how does one make/buy a toner workstation? looks interesting!

My brother 9330cdw just died.. and will not turn on anymore.. I tried removing paper tray and plugging in with power button pushed, so I guess it is power supply fried. What do you recommend as replacement, This printer Brother l3770 or canon 743cdw-- or something else if one had to buy today?

hello bro I have something to ask. is it necessary to use additional gear to reset the TN-263 . black cartridge? or not necessary..?

Hallo, viel dank für Anleitung. Ich habe mein Toner auch nachgefüllt. Dabei habe ich leider der Tonerroller angefasst und dann habe ich den Roller sauber gemacht. Ab diesem Moment druckt mein MFC7320 mit grauem Hintergrund. Der Hintergrund ist also jetzt nicht mehr weiß. Wissen sie vielleicht, was ich machen soll? Freundlichen Grüßen.

@viandant5 i refilled through the refill plug just under the little white gear and everything was fine but my printer thinks my cartridge has no toner in it so it won't work so what do i do? please help

I have a problem and I' don't know why is this happening. I have an alternative tonner TN 2340 and I've tried refill it a couple of times. The thing is for some reason the center gear shaft, the next to the reset gear just stop spinning and get stuck, so the system doesn't work any more. I don't know why this is happening. The first time I did it I fucked it up, te gear shaft got stuck. The second time, no problem and all worked fine. Now, the third time I'm doing the procces the gear shaft is stucked again. I don't know what to do, please help.

Hello, will TN-247 wrk in place of TN-263 or TN-267 in HLL3270CDW?

Can someone suggest a good reliable color laser printer with fairly easy refillable toner?

I was so excited to buy a Brother HL-L3210 cw. It does an unacceptable job printing photos. Is there something that I can adjust to improve photo quality?

hi sir what is the chip for? for the printer to identify the toner?

Tank

where can I buy the reset gear with the spring?

Nice can you please tell me how to refill torner tn263 and tn267 bk

where can I find the replacement chip and a good toner?

Wednesday 28/10/2020. Hello "Viandant5". I have been using a Brother MFC-L3750CDW for a few months and have recently succeeded in replacing the original four standard capacity cartridges (TN243) by high capacity cartridges (TN247) in "compatible" version, ... this over the course of the period. 'exhaustion of each of these original cartridges ... and preceded by "simple" "resets" of these cartridges, .... until the visible appearance of an excessive exhaustion of each of these cartridges, ... thus motivating their replacements. I carried out these first "resets" by using the key press combinations allowing to reach the "menu" then to specify the reinitialization of the capacity of each cartridge, with mention of the "standard" capacity of the original cartridges; Then, when it was necessary to insert the "compatible" cartridges of "high capacity", ... I had to operate, ... at least on some of these "compatible" TN247 cartridges, ... the procedure more " closes "cartridge reset ... by correcting the correct initial position of the" reset gear "(based on one of your videos) ... and then correctly selecting the correct capacity via the" menus " to have their "high capacities" recognized. Alas, ... after a few impressions (although correct) having followed the placement of the last of the "compatible" cartridges, I was surprised, after switching on, to receive the message "No toner "... which persists despite all my attempts at new resets by the two processes mentioned previously ... and this on each of the four cartridges, ... since the" message "does not tell me which cartridge is not detectable. I went so far as to check / clean the "contact points" which could, in the printer, allow "physical" detection of the presence of cartridges, ... but this did not bring any improvement. I am very distraught, ... especially because very soon I should be able to materialize other essential impressions, ... as well as document scans ... which are also refused to me by the equipment, ... causes the message "No toner" to be displayed immediately after switching on the equipment. Can you provide me with other ways to resolve this "problem" ??? Thanks in advance. PROOT Guy 8-) "guy.proot@gmail.com"

Which original standard or high yield cartridge has reset gear

ciao utilizzo delle cartucce compatibili (Alphalink) che pero' ora la stampante non riconosce piu. Cosa posso fare? sostituire il chip mi sembra una operazione un po complicata... hai consigli? grazie mille!

This toner has as refill plug in the left please use that to refill not via doctor blade

Wait.. what? What about the chip? You said it doesn't have to be changed or reset and yet you have changed it?

It seems there are 2 methods to reset TN-243/247 cartridges: 1. The reset gear shown in this video 2. The software reset shown in your other video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6WAb2C3Wgq4.html What's the difference? Which reset method is better? I'm guessing that MAYBE the software reset is only a "soft" reset, but when the reset gear reaches the end position, the software counter is ignored, and the cartridge is shown as empty. Then you can only reset it with the reset gear, but not the software reset method. Right? I don't know, that's just my guess how these 2 reset methods interact with each other.

What a terrible design for refilling. I definitely wont be buying one of these printers. I will rather opt for a tank fill inkjet.