Refinishing a 300hp supercharged mini jet-boat. night and day difference.

Подписаться 656 тыс.

Просмотров 31 тыс.

50% 1

We take a grinder to the outside of my 4 seat jetstream mini jetboat to grind a pattern into it. It goes good and bad. We also rebuild a lot of the systems on the boat and outfit with eva foam!
You can buy some merch and help support the channel! - garagebuiltco.com
Tools Used
Milwaukee Bandsaw - amzn.to/2Zqn4OU With This Stand - amzn.to/3d5bqNv
Cheap Plasma Cutter - amzn.to/3hJdbS7
Milwauke Tool Die Grinder - amzn.to/2MoAQu9
Milwaukee Tool Headlamp - amzn.to/2xUWthH
Small Milwaukee Flood Light - amzn.to/2Sf39Ox
Milwaukee Tool Underhood Light - amzn.to/3f5K6jw
Milwaukee Tool Mid Torque 1/2" Impact(2861-20) amzn.to/3b1bqwG
Milwaukee Tool Stubby 3/8" Impact (Small Most Used Tool)- amzn.to/2Jdirid
Milwauke Tool 3/8" Ratchet (Life Changing) - amzn.to/2JcpQhy
Milwaukee Tool 1/4" Ratchet - amzn.to/35VZM41
Milwaukee Tool Ratchet Wrenches - amzn.to/2CYRFKz
M12 Drill/Driver - amzn.to/35QVZoR
M18 Drill/Driver - amzn.to/2p6WuKJ
Gearwrench 3/8 Socket Set Mid Length (Very Nice Sockets) - amzn.to/2VnbMHm
Gearwrench 3/8 Socket Set Deep - amzn.to/3b1pFBH
Multiprocess Welder - amzn.to/3g6y5dK
Drill Bits - amzn.to/3fc4DkZ
Thanks to all who support me on Patreon! - www.patreon.co...
IG - / taylordrifts
Twitter - / taylordrifts
Email For business Inquires - taylordrifts@gmail.com

Опубликовано:

23 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 224

@longboarderwade1 7 часов назад

You better name that damn boat the JIBBER-JABBER

@wilderstewart9917 7 часов назад

With muppet Taylor on the hood lol

@typurp 5 часов назад

SS Jibber Jabber

@gabrielpoudrier4664 3 часа назад

Would be nice at the back like a big boat 😮

@nathonguiland2699 3 часа назад

Yes

@CharmBlood5 57 минут назад

I hope so

@tripod6406 6 часов назад

Taylor, some unsolicited advice, when it comes to you electrical bits and pieces, the pack outs, keep them out of direct sunlight, because any air in there will condensate and your electronics will get wet, I found this with my fishing equipment, and camera batteries, with the clear top, just turns it into an air condenser and soaks everything inside, I hope that helps.

@tmdacr04 4 часа назад

Or keep desiccant pouches inside the pack outs

@jarrod2254 4 часа назад

Silica packs is a easy fix

@Shadow0fd3ath24 2 часа назад

@@tmdacr04 yup the reusable ones are awesome, last 6 months in my gun safe during humid ass summer and a few minutes in the oven and theyre back to new again

@billmadison2032 7 часов назад

Where is Sandy we need more Sandy we want the cat

@thewitt76 7 часов назад

Yeah where's SANDY? I lost my sandy goody to my daughter and she wore it to the hospital today for her surgery, it's cold in there, and I was thinking about her

@randyloveladysr 6 часов назад

He posted her on his insta about a week ago she's still an absolute unit

@billmadison2032 6 часов назад

@@thewitt76she is such a good girl

@Doubie. 5 часов назад

Him and Cletus have been stingy with the pet content in the last few years

@jimsubtle886 Час назад

That portable packout repair kit is legit the best part of this video. I am using this as my own!! Thank you Taylor Ray

@thelifeofjp1996 6 часов назад

Here's an idea , maybe truck bed liner spraying the boat?

@Shadow0fd3ath24 4 часа назад

gross

@dfacedxa 4 часа назад

This was what i was hoping he would do when he started describing next steps. Probably easy to touch up when needed as well

@Kodiak660 40 минут назад

That would make it a royal pain to load and unload on the trailer.

@hemidaytona2378 7 часов назад

"Engine-Turned" is the description that you are looking for... Old school treatment for dashboards and other metal panels in cars, boats and planes.

@foxbatmotorsports 7 часов назад

Also known as Jeweling.

@huckhuckhuck 7 часов назад

At this point, I feel like you should have just done your own boat build from scratch.

@JuPac420 6 часов назад

Jose is such an MVP

@achikennugget38 7 часов назад

You could probably mount the lights behind the windshield! I've seen off road truck people mount light bars inside the cab to keep the lights from whistling when driving. Gotta seal it with some plastic/edge trim to not get any glare though

@wilderstewart9917 7 часов назад

Yo! Maybe tack a tab to the center of the dent and use a comealong to yank it out?

@tim_fogle 4 часа назад

This dude has what most people make annually JUST in Milwaukee pack-out boxes and accessories.

@Shadow0fd3ath24 4 часа назад

for real

@Madagon367 Час назад

Awesome for the other guys when riding in a group. They bring beer and snacks. Taylor brings a hundred pound of tools plus he can fix stuff.

@ectobluntus 6 часов назад

Taylor, the first step to recovery is admitting you have a packout problem!

@sawyerwallace9631 4 часа назад

Packouts in the mini jetboat are the move! I run them in my mini jetboat and will never go back.

@bowfischer6002 3 часа назад

Three Six Mafia, Late Night Tip in the background. Early 2000’s with 2 Pioneer 10’s bottoming out in the back!

@mateodavid1967 6 часов назад

Alright Mr Taylor Ray, love the shed, love the boat, REALLY love the bus!! But I'm ready to see that rx 7 get sent! I want to see 1/4 mile Taylor be realised.

@frazeysburgelites3490 7 часов назад

Thanks for being consistent with content

@dainperrault585 4 часа назад

These videos, so satisfying, getting all the bits tidy up and coming up with creative solutions for the actual practical use

@tytymill 6 часов назад

For reference, there is a product called “Goof-Off” at Home Depot that I use for all paint/adhesive/skeeze remover.

@b_baker 6 часов назад

Since you have been so consistent with the posts Ill have to let it slide that you've been neglecting all the other badass automotive projects that are on deck. As always love the content, hope to see that vette out soon, and hope to see something badass get built!!!

@EagleRun23 7 часов назад

TBH i really enjoyed the shop builds, but i like the car/boat builds too!

@MikeRay1978 2 часа назад

I use that tall pack out box for my mobile wiring tools. I travel for a living and don’t usually have to do a ton of wiring but man it’s nice to have everything in one place that I can take anywhere.

@kevinsantiago9760 7 часов назад

wrap that wavy panel in the rear and it'll look mint

@Shadow0fd3ath24 4 часа назад

"Engine turning/jewel turning" a jet boat is something i NEVER would've expected....i LOVE it though!! Also "Goof Off" or "Goo Gone" will remove that sticky stuff. Also put Dessicant packs in those packouts(you can get reusable ones cheap)

@covertsolid1 3 часа назад

Just for future reference, they make a hot knife for cutting foam, you would probably want to do it outside but there are some cheap ones on Amazon for like $80. I used to work in a body shop years back, for the big hull dents you could weld a tab to the low spot and either clamp onto it or drill a hole in it for a hook and go at it with your slide hammer. You would probably want to heat it like you were doing. Once you get the panel back in shape you just have to cut the tab off and tune it up with a flap disk. Love the channel man keep it up!

@WexWerxScott 4 часа назад

Damn bro! That's a lotta work on the mini jet! Nice work with the packouts!

@kevinwilliams563 3 часа назад

Perlage looks pretty good on the boat. First time I have seen it on a boat.

@petersantoro5323 3 часа назад

The die grind looks great

@Jakexgt1979 5 часов назад

Maybe a roll cage. You could mount so many things to it and it would help protect those in the back. Maybe the add a shade. Also you could add some of the roll cage on the side of the boat to help protect front trees, like rock sliders for jeeps.

@lunchbox517 5 часов назад

Polished shows every imperfection great choice 😂

@joker4g63tt4 4 часа назад

I've been doing mechanic work for 30 years and never switched to battery tools except for a snap on zip gun. But a good quality air tool will last you a life time if you use airtool oil and keep the seals oiled.

@blksrsil 3 часа назад

Creature comfort suggestion, add some sea deck to the top of the small pack outs so your passengers legs aren't getting destroyed bouncing off of them

@proudpennsylvaniaman7996 7 часов назад

Please move the sticker table under the window and the welding table where the sticker table is.

@vwclub3 4 часа назад

Funny hearing when deep in the woods when talking about a boat

@JeffSlover 5 часов назад

Nice to see the 1500 in the garage, i'm hoping it's time for a cage, and some weight loss! Boat looks good, that super tall Packout box is a nice find, now that I know they have those I want to track them down.

@jamest5149 4 часа назад

Put the air box lid on a hinge with a stay so you just have to open it for noise or close for quiet…. Could add a Bowden cable so you can do it quickly from the dash without having to open the back 👍

@houseofmine 7 часов назад

loved the bandaid

@josh3299 3 часа назад

You’ve always been a Milwaukee guy, and I remember when they sent you tools way back when you were wrenching in your garage with your roommate who built that Ram Charger…. Can’t remember his name! All that to say, you could get your name written in Milwaukee-style font and put it on the side of the boat! Might make great merch too! Or get Garage Built Co printed in that font. Stoked to see the shop and all the growth you’ve experienced! I’ve been watching since the Miata was red and ate pancake syrup! lol

@justindavis311 5 часов назад

Would be a good idea to mount the milwaukee packout half cooler between the rear seats and then the pack out tumbler lock in for when you go crazy

@airwatercooled 3 часа назад

look at that clean shop. sharp!

@zakmartin9668 5 часов назад

Just DA the sides with 120 grit. It’ll leave a uniform surface.

@MrRee-kn4xd 5 часов назад

You should mount some kind of light in the engine compartment. A floodlight would be handy in case of emergency too under there.

@TheFishingfool25 5 часов назад

We use MEK or Toluene at my work to eat adhesive. Work like a charm. Just spray it down, then use a scraper or razor blade to get it off.

@wrexz 5 часов назад

Dry bags for boats were invented for a reason lol I hope you have better luck with the pack out system

@myurcek05 4 часа назад

I think to get the best results for the machine finish you are going for, you should sand the aluminum to 320 to make the scratches as even as possible before the die grinder polish stage.

@dog2bert 4 часа назад

You can 3d print latches with labels for the packouts

@toddsupraman7609 3 часа назад

If you tig weld some tabs to the outside of the boat were the dent is and then use a nice big slide hammer, you will be able to straighten it out and then remove the tabs

@Brandonscode 15 минут назад

Larger circles on larger uneven surfaces. And use an interface pads before the sandpaper to get deeper into dents and make the look not dented. I did this a whole stainless jet boat. Took me two weeks. But dang. It was worth it. I did 7inch pad racing stripe even. The diff sizes have suck a cool effect.

@jamest5149 4 часа назад

Make some alloy/nylon nudge bars for bow to add some strength and have a sacrificial bumper

@jameslastname9171 18 минут назад

Foam tools should go in merch orders!

@Epsonblade 2 часа назад

Machine turning, better known in the firearms industry as "Jeweling"... Pretty cool idea and very different than what you see.

@DELirious97 5 часов назад

Petrol and an old rug on stubborn glue and tar works a treat

@moparmarley 3 часа назад

If there is not enough friction to hold the items in the foam, just add a layer to the lid to sandwich everything in place.

@channeling27 5 часов назад

That shop is so awesome

@stensg 4 часа назад

Should do another biger packout like you have under the hood as a center council for the front seats if theres room

@jamesyeakey9409 6 часов назад

Kerosene to take off adhesive on metal. Lighter fluid on paint. Both have worked for me.

@hedrives 7 часов назад

Mighty big toolbox.

@johnv9854 6 часов назад

You should add Dzus fastners for the floor boards and some quick release seat brackets..

@ColbyJohnson 2 часа назад

For that large dent in the front, ive used the chief long barrel air hammer to shape metal

@yutub561 2 часа назад

I did the same finish on my kitchen sink lol. Have to redo it every couple years but it looks nice

@lelandstanford9534 7 часов назад

Should have Acid washed it then sand it down with 320 grit to a matt finish

@TKAero711 6 часов назад

If you ever do it again you could try to use a laser lever to get all of the circles at the exact same height

@stimothy9396 6 часов назад

Goo-gone works good for tough adhesives

@Soundguy79 6 часов назад

That’s a good looking shop, ever think about racing out of it?

@whoisjohnlamb 4 часа назад

do something with the ramps for the 4 post lift. It will look way better

@TheReeves2236 4 часа назад

Shocked Taylor didn’t pull out a laser to keep straight

@Vorgto 14 минут назад

Bought a garage with 220 and a large two stage compressor. I need to collect a ton of air tools as well, so please please test them out for me first! haha

@magblevins 2 часа назад

Using air tools especially for extended times you need to regularly put some tool oil in the port to keep them lubed

@magblevins 2 часа назад

Every 30min to hour under continuous use

@apexedmedia 2 часа назад

The clear tops Yellow in the sun and melt things inside.. we found that out in Pit road working for Dale Coyne Indy car team

@Brtmyster 5 часов назад

I have a question guys. Why doesn't Taylor have 2M followers? Spread the word. Tell your friends. This young man is very good. He's quite the innovator. He's a fabricator. He has talent and skill. Let's go get this man to the top boys.

@Shadow0fd3ath24 4 часа назад

too long and in depth, very few guys like him get huge traffic sadly.

@stevemccauley5734 2 часа назад

Because he’s not controversial. Controversy gets the big number of viewers & subscribers. Look at guys like Whistlin’ Diesel. A lot of people hate him. That’s why he’s so damn rich. Cleetus is sort of the same. He’s always got comedy bits he’s doing.

@michaelswanson7881 5 часов назад

The first thing I do with a new air tool is fill it with PTFE dry-lube and let it sit for 24 hours, the fibre viens and bearings last ten times longer, and you only need to oil all your air tools once a week. This is using them every day as a fibreglass contractor.

@rei39 2 часа назад

kaizen foam sells those foam inserts precut for every size packout just fyi. it saves a lot of time and is a perfect fit

@jamest5149 4 часа назад

You can run air-tools all day, every day but you need to add a few drops of air tool lubricant at least at the start of the day

@johngrant1337 3 часа назад

nice job .thanks

@red88ization 5 часов назад

best put a heat shield on that box if you intend on it being box shaped when you open the engine bay to use it

@richardfarmer6570 43 минуты назад

I used to live in Florida and know what those downpours are like, they can get intense.

@TheFastfoodgaming 4 часа назад

I've always been one to scoff at the Packout guys at job sites, but you're starting to sell me on them.

@just-a-waffle 2 часа назад

3M has adhesive remover spray that might help knock out that sticker residue

@darinonetime8352 6 часов назад

Three 6 Mafia Late Night Tip

@ZapLabs 4 часа назад

If the passengers in the back are wearing PFDs, you don't need as much cushion on the boat. Your are wearing it. Especially good to wear when getting rowdy.

@justinperdue3657 6 часов назад

i thought you were going to use the truck bedliner on it. It might be a good idea im not sure how it would hold up, though

@califoniarunning 5 часов назад

Use lacquer thinner for adhesive removing. Not on paint those. Aluminum is fine.

@lorenmeyer5290 6 часов назад

Damn nice boat !

@technerdy 3 часа назад

good reminder to oil your air tools 😃

@tommyhavoctv3350 4 часа назад

Also you should really “stone” your welding table, then keep it clean with the stone. Look it up, you may thank me later. If not, no hard feelings lol. But it’s easy and maintains flatness

@djstizl 45 минут назад

You're not worried about melting the box being that close to a supercharged engine?

@richknudsen5781 3 часа назад

I predict the next video will be Taylor stacking that toy boat into a swamp tree at wide open throttle. Should be an epic crash.

@craigfiles7067 6 часов назад

You need a bottle of Goo Gone to remove adhesive residue .

@eag8999 53 минуты назад

Rapid Remover will easily remove that adhesive

@four20jt 5 часов назад

You should see if you could put the lights under the window behind the glass at the top

@davessparetime83 5 часов назад

The trick is to angle the sanding pads and make half circles and overlap.

@proudpennsylvaniaman7996 6 часов назад

Get a cover for the boat an it's tires an keep it outside...it literally goes in the water. Under your lean-to outback with the covers it would be fine and not take up shop space