Obrigado! Para editar o video usei o Vegas 6 (ainda usava windows XP), para conversão de arquivos de vídeo: MediaCoder, para cronografar foi o SoftChrono, para gráficos Excel e OpenOffice, também o Hawke Chairgun, para analisar grupos usei o OnTarget, e finalmente para editar imagens o PaintShop 4.14. Alguns destes programas são bem antigos (década de 1990), mas talvez ainda seja possível achar fazendo buscas com o google. Devem existir programas bem melhores atualmente.
33 disparos na mesma vo, com a reguladora, 260 MTS por segundo com chumbo de 21g 😱😱😱, e praticamente impacto de 22 lr, estou imprecionado ainda mais com a precisão, xoouuuu.
Obrigado Tiago! Tem uma variação ainda de uns 4 m/s, mas está bom demais poder atirar mais vezes sem mudar muito a velocidade. Não conheço nada de arma de fogo, achava que 22lr era bem mais potente (pelo menos o dobro do peso do projétil e da velocidade)!! Abraço!!
Como sempre, vídeos muito bons. Muito informação útil. Essa regulagem de 120 bar é a de fábrica da reguladora ou você quem pediu assim?Tenho uma BT65 e vou comprar uma válvula Zeca, mas não sei qual melhor regulagem pra tiros de 30 a 50 m. Grato.
Não mudei nada, instalei como veio da loja e tem funcionado muito bem na BT65. Experimente instalar sem mudar o ajuste e teste com vários tipos de chumbo por algumas semanas (alguns chumbos que antes não agrupavam podem dar bons resultados com o regulador instalado), se tudo correr bem não vai precisar mudar nada.
Excelente vídeo!!! Eu tenho uma válvula dessa na minha, o problema é que sempre dá vazamento com uns 03 meses e tem que trocar os orings da válvula. A sua acontece isso? Estou até pensando em retirar a válvula.
Nesse regulador não tive nenhum problema, em outro (modelo anterior) para a AT44 4,5mm tive problemas sim, o tempo de recuperação dele era muito lento, não descobri a causa e troquei por um da Lane. Este para a BT65 é excelente.
nice work again. :) Im waiting for the fill probe and im going to get the gun. I was thinking .177 or .22 caliber. I would go for 5.5mm if I can get 50 regulated shots with the regulator at 40 joules @@unrelatedactivities
5 лет назад
Çok teşekkürler...tüfeğimi tanımama yardımcı oluyorsunuz...
Boa noite, eu aqui mais uma vez perturbando, se puder me ajudar agradeço muito, instalei minha reguladora do Zeca a 6 meses atrás, hoje acabei de trocar todo kit oring do cilindro mas fiquei chateado quando vi o vazamento entre a disparadora e o corpo do cilindro de alumínio, pode me dar uma luz do q pode ser? Imagino ser algo de errado com a reguladora do Zeca uma vez q retiramos o oring q fica na disparadora. Desde já agradeço muito vc tem me ajudado sempre q preciso
Boa noite, pelo que entendi o cilindro de alumínio é aquele que fica entre a válvula reguladora e a disparadora (plenum), certo? Se for este o caso, e os dois o'rings do plenum estejam em bom estado, pode ser que a reguladora tenha ficado um pouco mais ao fundo do cilindro de ar, perdendo contato com a base da disparadora e portanto sem vedação (não é possível encher o cilindro). Se for isto, tente puxar a reguladora um pouco mais e rosqueie a disparadora mantendo o cilindro inclinado. Verifique também o estado do o'ring maior da reguladora, as vezes ele é danificado quando a reguladora é inserida e passa pela rosca do cilindro de ar. Boa sorte e bom reparo.
é bem parecida sim regulei a minha para 100 bar e deixei esta abertura, agora consigo em media 60 regulados, com chumbo rifle Premium series de 18,67gr, com 800 fps.
Installing a regulator allows you to fill your air cylinder to more than 200 BAR without any valve lock issues. Hatsan air cylinders are rated at 300 BAR and can be removed and safely degassed in any case. I routinely fill my regulated BT65 air cylinder to 250 BAR for extra shot count. There is no logical reason not to fit a regulator to a Hatsan PCP rifle and I don't understand why they are not fitted in the factory at the time of production.
I agree Hatsan could sell regulated air rifles, they already make their own regulators so would be very easy to include it at production line. I don't know if the regulator on this video is rated to more than 200 bar (there is almost no info on it at the site), and as I have a compressor at the range I always fill to 200 bar or less (the compressor has a safety valve set at 220 bar).
Hello ,thought about wat is happening if your gun is heating up (in the sun or something)after you fill it up to 250 bar, the pressure will rise more ,it is not wise to go over the factory recommendation.
100% Profissional, didatico. Curtido e inscrito! Entao vc me aconselha a usar essa valvula reguladora? Resumindo: agrupa melhor? E da pra efetuar mais disparos economizando mais o ar do cilindro? Acabei de comprar uma bt65. Abraco!
Obrigado!! Estou gostando de atirar com PCPs com válvula reguladora, recomendo sim. Quanto ao agrupamento, costuma melhorar, mas geralmente é necessário ajustar a potência da arma para chegar nos melhores resultados. A quantia de tiros regulados depende da potência e eficiência do sistema todo, por exemplo com um regulador ajustado em 150bar e a mola do martelo ajustada para maior tensão, a arma vai ter bastante potência mas poucos tiros regulados. Com o regulador em 100bar e reduzindo a força com que o martelo atinge a válvula de saída é possível conseguir muitos tiros regulados, porém com potência também reduzida. Para mim o ideal é tentar ajustar a potência para o melhor agrupamento nas distâncias que costumo atirar, usando o chumbo que proporciona os melhores resultados, ao mesmo tempo tentando encontrar o ajuste mais equilibrado para ter maior eficiência no consumo de ar. Existe também a possibilidade de modificar as aberturas de passagem de ar entre a válvula de saída e a porta de transferência (inclusive esta), para melhorar a autonomia, mas nunca fiz nada em relação a isto. Ainda vou fazer um vídeo sobre como estes ajustes infuenciam autonomia e potência, falta estudar mais um pouco fazer uns testes para ter material suficiente. Parabéns pela BT65, é uma arma excelente, forte abraço!!
Nunca he usado ni probado una válvula reguladora Hatsan, pero me parece buena. Lane Regulators solía ser muy buena, es interesante revisar sus productos y materiales informativos en su sitio web: laneregulators.com/
so the problem is when the cylinder is at maximum pressure and the hammer hits the valve and it doesn't open as much, and as the cylinder pressure drops the the valve opens more amd velocity increases, well why not just put a small spacer behind the striker as it unscrews of the top of the value to limit it's opening distance at the lower cylinder pressure ?
Thank you Brenda! I left it at the factory default pressure of 130 bar. This air rifle still needs to have its muzzle velocity reduced a little, by adjusting the hammer spring tension.
Thank you Michal! The original output valve spring is Hatsan BT65 part number 2332. I think it is easier to have a gunsmith make a replacement one than find a place that sells it. I didn't found any searching on Google.
Tonho , muito bom ... parabéns cara ! mas me tira uma dúvida , essa válvula aumenta a autonomia ! por exemplo de 10, consegui mas quantos tiros ? vlw ... forte abraço.
Obrigado Izael! Depende de um monte de coisas, mas basicamente o número de tiros é inversamente proporcional a potência ajustada, independentemente de usar ou não um regulador. No caso de a AT44 estar conseguindo somente 10 tiros sem regulador é bem provável que esteja ajustada para potência bem alta, se reduzir a tensão da mola do martelo para reduzir a potência, pode conseguir mais tiros mesmo sem regulador. A vantagem do regulador é que você tem muito menos variação de velocidade enquanto a pressão do ar no cilindro estiver acima da pressão do regulador. Abraço!!
tenho uma válvula ZECA na minha BT e regulei conforma o fabricante e não consigo dar 40 tiros até a próxima recarga, sabe dizer por cima onde esta o problema ?
Edleims Silva ; quanto mais pesado o chumbo, gasta mais ar. tenta fazer uns testes com chumbo mais leve. tbem tenho a valvula zeca na minha bt e consigo 60 disparas com chumbo jsb 15,89 ou strike da tecnogun. já com jsb de 18,13 cai para 35/40 disparos. ok
Na minha BT65 estou carregando o cilindro de ar até 190bar, e com 30 (regulados) ela chega em 120bar. Daí para frente a velocidade começa a variar mais, porém ainda é possível mais tiros. Não mudei nada além da mola da válvula de saída. Se a mola da válvula de saída da sua BT já foi trocada pela que acompanha a reguladora, talvez precise reduzir a força do martelo para gastar menos ar. Verifique também se não há vazamentos de ar no cilindro. É interessante cronografar atirando uma carga de 200 a 90bar e saber quantos tiros regulados e em que pressão a velocidade começa a variar mais, para ver se o ajuste da reguladora está em torno de 120-130bar. Caso esteja ajustado para pressão muito acima de 130bar provavelmente não terá um ganho em autonomia (porém nunca testei isto).
Oi Jorge, nunca testei isto, interessante. O JSB de 15,89gr agrupa bem com sua BT? Estou testando chumbos mais leves agora que a minha está com regulador, tomara que ela goste de maior variedade de chumbos para não ficar preso só no Baracuda.
+Airgun Shooting And Related Activities sempre uso o de 15.89. agrupamento exelente. na minha opinião o melhor é o jsb de 18.13 porém ele gasta mais ar.
Great info. One of the best do-it-yourself mods for an air rifle I have seen so far. It looks like the bt 65 might have a threaded barrel. Any chance of it being able to take a silencer? I have heard it puts out over a hundred db's. Not a back yard friendly rifle!
Thanks! Yes the BT65 has a 1/2" UNF threaded barrel for suppressors, muzzle breaks or air strippers, and it is very loud at full power. Even with a regulator, its noise is uncomfortable at indoor ranges, definitely not back yard friendly! I always use a suppressor. Here is a video showing the difference with and without the suppressor: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SQof7vR5BNA.html
essa folga que se deixa entra o cilindro e a disparadora serve também para outras carabina como a p10, a minha esta rosqueada até o final sera que isso impede ela de respirar?
Não conheço a P10, mas se o regulador e o cilindro forem semelhantes aos do vídeo é possível que precise deixar um pequeno espaço. Pelo que percebi, as vezes basta retirar o o'ring da válvula de saída, mas deixar a folga, ou então fazer um canal na rosca,da valvula de saída garante um respiro mais eficiente. Faz tempo que estou para editar outro vídeo sobre reguladores, espero conseguir até julho, daí mostro algumas coisas a mais relacionadas ao assunto.
Mais um bom vídeo - perfeito. Como disse no mais recente filme sobre a reguladora para a AT44, uma pena não dispor de reguladora para a Sumatra. Estive pensando - o sonho é ter uma válvula reguladora na PCP ... MAS me ocorreu agora, se você considerou o volume "perdido" no cilindro, ocupado por ela agora. Certamente continua a ser vantajoso seu uso mas o cilindro, já de volume pequeno, agora fica menor. Pode comentar ?
Amigo, tenho um at44w, e coloquei a valvula do zeca. 260 m/s com jsb exact heavy. da em torno de 30 tiros tambem. Em 45 metros coloco dois ovos e com tres tiros quebro eles. sempre atiro a 45 metros por causa do meu terreno e é um tiro em cima do outro. Sempre apoiado. Meu irmao tambem tem uma e colcou a valvula depois que viu eu atirar. kkk. inveja pura.
Obrigado! Bom, eu uso um compressor elétrico para encher as PCPs e só atiro com ele por perto, então nem me preocupei com mudanças na autonomia :-). Pelo que pude observar, o problema de redução no volume do cilindro é mais considerável se pretender usar bastante potência no tiros, o regulador teria que ser ajustado para uma pressão alta e provavelmente a quantia de tiros bons seria igual ou menor do que sem o regulador. No caso da BT65 .22, a autonomia aumentou um pouco, a potência média abaixou cerca de 30 m/s, porém a variação na velocidade passou de mais de 20 m/s em 30 tiros para menos de 6 m/s em 35 tiros. Para mim a vantagem é para o uso do regulador, mas gostaria de ter um segundo cilindro sem regulador para aqueles tiros em potência máxima (você que tem uma Sumatra sabe que é divertido destruir alguns alvos!!).
Vi novamente os vídeos do seu compressor. Nossa ! legal mesmo, mas caro que doí ... ou não - a bomba doí muito ! Então, não conseguindo comprar o compressor e não aguentando acionar a bomba já pela idade avançada, resolvi comprar um scuba de 11 litros da Rossi. Por sorte na minha cidade tenho um amigo que tinha uma loja de mergulho - fechou mas manteve o compressor e algumas coisas. Hoje presta serviço pra muita gente e cobra 50 reais pra encher meu cilindro. Estou contente.
If the regulator has the same design as the one in this video, remove the output valve's o'ring. Otherwise the regulator's spring chamber will not be able to reach the atmospheric pressure to "breath", and the regulator will eventually fail. Check this other video from 0:50 to 2:00 for an illustration: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wuQhO5KcTAA.html
That stiffer output valve spring came along with the regulator. I think the maker have tried various springs until find the one which gave the best results, at least that is how I would do it.
So, when you fill the cylinder before re-inserting it, the pressure pushes the regulator, the regulator pushes the output valve and that's how the pressure doesn't allow the 1mm gap to be closed upon screwing the cylinder back in place, is that correct?
From 13:55 the video shows the performance with pressure starting at 200 bar and ending at 100 bar for a total of 40 shots, the spread was 30 fps. From 200 to 120 bar (regulated shots) the spread was 14 fps. The regulator pressure is said to be set to 130 bar from factory.
please I have a slightly modified BT 65 .25 with huma regulaor set at 150 trigger adjustment etc. what spring do you recommend in the air valve for maximium power and accuracy thank you in advance
I don't know, I suggest you to source a variety of springs and experiment. Stronger output valve springs reduces power and vice versa. Try adjusting the hammer spring tension first.
Hi . What is the number of the new replacement spring or what they call ? I should replace my original one after install my regulator Even after the speed nial has been reduced to the limit , i lose a lot of pressure :(
I remember to have measured the new valve spring before install, but can't find the notes anymore... I have two photos showing the original and substitute spring side by side, I will post them in the AS&RA facebook page, so you can have a good visual reference when searching for it or to send for a spring manufacturer: facebook.com/BatSkull.ASRA/posts/1829302800432337
Hi . I have two questions if you allow me please. What's the reason of changing valve spring what if I installed as regular without changing original spring? Second question I have a refilled the cylinder to 200 bar after installing my regulator adjusted to 120 bar after 20 shots the cylinder bar Decreased to 130 ! Is that normal ? I lost A lot of pressure!!!
The reason for changing the output valve spring is to help in achieving an optimum balance to a better efficiency. In the case of the Hatsan BT65 .22 without power restriction (as mine) and the Zeca regulator set to 130 bar, the output valve spring supplied with the regulator kit is stronger than the original spring, offering more resistance when the valve is hit by the hammer. My BT65 shot count is about 35, from 200 to 130 bar, a small increase from before installing the regulator, but with a flat power curve (47 Joules). If your BT65 is same model as mine, .22 without power restriction, a regulator set to 120 bar should allow for about 40 regulated shots (~43J) from 200 to 120 bar, but you may need to increase the compression of the output valve spring, and/or reduce the tension of the hammer spring. What is the power your rifle is developing?
Thank you for your response. I just installed the regulator didn't make any other changes in me hatsan bt65 22cal. if you have any advice for me I will never forget your kindness
My BT65 .22 without regulator or any modifications had a shot count of 30 shots from 200 to 100bar, and a velocity curve with a spread of 40 m/s (131 fps), using H&N Baracuda 1,37g (21,14 grains) pellets. At that time I usually filled the air cylinder to 180 bar and had about 15 to 18 good shots (the "sweet spot") down to ~125bar with a velocity spread of about 12 m/s (39 fps). After installing the regulator I get 30-35 regulated shots with a spread of less than 6 m/s (20 fps) from 200 to 120 bar. I believe you can get about 25 regulated shots with your current setup, without further modifications to your BT65, what sure is an improvement over the original unregulated BT65. But if your goal is to increase shot count, some modification is needed, as I stated before you can increase the compression of the output valve (by using some sort of spacer or substituting for a stronger spring), and if necessary reducing the compression of the hammer spring. I recomend the reading of this text from the Lane Regulator site (MK8 Regulator Tuning In Manual): drive.google.com/file/d/0BxDsz9IVH1pwczVuMnREb09UcWc/view?usp=sharing and this video about BT65 hammer spring adjustment: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jcXBLr2Htl8.html If you can get access to a ballistic chronograph it will be of great help to tune your rifle.
This video shows a velocity curve without the regulator (original BT65 and H&N Baracuda): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uFrltTMIx5E.html
About 35 regulated shots, without any adjustment to the BT65 or the regulator valve. Shot count can be improved by lowering the hammer spring tension, at the cost of also lowering power.
Hi help i put a regulator to a galatian hatsan But it goes very low to 300 fps I did not change the spring of the valve because it did not come and I left that part Now for it to work better the ideal is to change the spring but I'm not sure if it is for a harder or a softer one You could help me with some measure of the spring so that it comes out to approx 800fps thank you very much
Hi MHC, if your regulator is the same as shown in this video, the spring is actually harder and would reduce velocity even more. Probably the cause of the low velocity lies at another place (regulator pressure setting too low, something restricting air flow, hammer spring tension...). I suggest you to remove the regulator (what brand and model is it?), verify if the air rifle is working ok without it, check regulator pressure setting, and re-install it following the instruction manual carefully.
Hello is regulator robert lane, and changing some orings that looked like they were wrong I'm going to take out the regulator and I will try to tell you how I was thank you very much for responding
With my BT65 it is a good velocity for Baracuda Match 5,53mm. I think works ok from 27 to 52J (though I've tried that only with a HW100 that likes Baracudas also).
It is a Brazilian website (Dispropil): dispropil.com.br/produtos/valvula-reguladora-de-pressao-bt65 You can check Lane regulators also (excellent regulators): laneregulators.com/shop/tuning-parts/regulators/pcp&filter=16
Ciao. Purtroppo non so come scrivere in italiano, io uso Google Translate. Se il testo è scritto abbastanza correttamente in termini di grammatica, il risultato è generalmente buono. Grazie !!
I only have installed this kind of regulator (Zeca) and Lane MK8 (they are very similar in terms of how to install and adjust). Sorry, I don't use whatsApp, which brand and model is your regulator and air rifle?
I just saw it at Pyramid Air, and from the photos I think it installs similar to the regulator in my video, one difference is the link from the regulator to the output valve. The Hatsan regulator output must be inserted into the air cylinder output valve, to do so you must remove the plastic cap that holds the output valve spring (the white one in the AT44, black and threaded in the BT65). Best and safest thing to do is to contact Hatsan asking for an instruction manual of their product.