Тёмный

Remove Oxidation From Your Boat 

BassGeek
Подписаться 81 тыс.
Просмотров 140 тыс.
50% 1

Restore the shine to that old boat by removing the oxidation. BassGeek shares how to remove oxidation from your boat.
Thanks for watching and don't forget to subscribe! You ROCK!
Send me Mail:
PO Box 538 Duffield, VA 24244
Get the Gear:
Flash Mob Jr.
bit.ly/2tOZ5YC
Lew's LFS
bit.ly/2tOZuKC
Lew's BB1 Pro
bit.ly/2HdwO5U
Megabass Vision ONETEN+2
bit.ly/2tk8Spb
YoloTek: www.YOLOtek.com?rfsn=1313443.07ddf3 If you decide to buy, use coupon code: "FUN" for FREE SHIPPING!
ConnectScale: bit.ly/2UX8s3W
-----------------------------------------------------------------------------------
**********Product Discounts **********************
Ledghead Lures: ledgehead.com/ and use CODE: BassGeek for 10% Discount!
Bassmunition Lures Discount: GEEK10
bassmunitionsl...
Opticast: www.fishopticas... and use CODE: OCGO10 at Check out for your Discount!
TRCCovers: trccovers.com/ 15% Discount Code: bassgeek
-----------------------------------------------------------------------------------
Follow me as I fish the Volunteer Division of the FLW BFL's
BFL: www.flwfishing...
BFL Profile:
www.flwfishing...
-----------------------------------------------------------------------------------
Other Social Media :
Instagram: / bassgeekfishing
Facebook: / bassgeekfishing
Twitter: / bassgeekfishing
-------------------------------------------------------------------------------------------------------
freemusicarchiv...

Опубликовано:

 

4 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 143   
@roberthux1128
@roberthux1128 5 лет назад
Thanks for posting this, it's helped me to decide to put some light sandpaper and buffing to the old Skeeter.
@BassGeek
@BassGeek 5 лет назад
Great let us know how it turns out.
@JoeHollandFishing
@JoeHollandFishing 5 месяцев назад
Looking Good! I liked the before and after pics
@BassGeek
@BassGeek 5 месяцев назад
Thanks
@TeamJesusOutdoors
@TeamJesusOutdoors 5 лет назад
Amazing what a little elbow grease will do! Great info!
@BassGeek
@BassGeek 5 лет назад
Yup cleans up nice
@Imonefischer
@Imonefischer 5 месяцев назад
came here for oxidation removal , done followed you from the intro cause its cool lol
@BassGeek
@BassGeek 5 месяцев назад
hahahaha Thanks.
@MrRedex88
@MrRedex88 2 года назад
I'm a detailer here in Louisiana, I do a lot of boats of different sizes. I actually enjoy bringing the gloss back on gel coats, I start on a bay boat this week which is very oxidized.
@BassGeek
@BassGeek 2 года назад
Shew I need to bring you my Triton.
@MrRedex88
@MrRedex88 2 года назад
@@BassGeek are you in Louisiana?
@BassGeek
@BassGeek 2 года назад
@@MrRedex88 nope Tn
@lipripper4840
@lipripper4840 Год назад
Where at in Louisiana? I need my pro craft done
@ForeverZ01
@ForeverZ01 Год назад
Cajun Kevin, I’m in Avoyelles parish and have a Ranger that needs some TLC. How can I contact you
@eddiereece8277
@eddiereece8277 5 лет назад
Great job guy's. My boat looks like heck right now but I'm sure she'll love me after this.
@BassGeek
@BassGeek 5 лет назад
Eddie Reece Awesome Good Luck
@jamesdeanboatrv
@jamesdeanboatrv Месяц назад
Great job! I have a dealership and we pay someone I’m going to try this! Thank you
@BassGeek
@BassGeek Месяц назад
Thanks
@jamesdeanboatrv
@jamesdeanboatrv Месяц назад
@@BassGeek you’re welcome!
@RyanSmith-fb8rf
@RyanSmith-fb8rf Год назад
Excellent job guys and thanks for the helpful information I’m doing my Bass Cat this weekend so this was perfect
@BassGeek
@BassGeek Год назад
Anytime sir.
@northfloridafishing4272
@northfloridafishing4272 5 лет назад
Nice job Guys now I know what to do when my boat gets like that.
@BassGeek
@BassGeek 5 лет назад
Thanks bro. Loving the you're pumping out vids.
@northfloridafishing4272
@northfloridafishing4272 5 лет назад
@@BassGeek Yeah I should have another one out soon.
@juanclemons1492
@juanclemons1492 Год назад
im starting on a skeeter fish and ski and so far its coming out good
@BassGeek
@BassGeek Год назад
Heck yeah. Just remember to keep it sealed and waxed after.
@FishingLakeCountry
@FishingLakeCountry 5 лет назад
Done this last year the easy way. Took my old 96 as a trade and towed a 2018 Triton TX18 home.FLC.
@BassGeek
@BassGeek 5 лет назад
Congrats on the new boat but that's not a option for a lot of us.
@FishingLakeCountry
@FishingLakeCountry 5 лет назад
@@BassGeek Understand, at the boat ramp and see young guns with new trucks and new 20' rangers. I purchased the 96 new and the motor started costing to much to keep it going. Made a move and glad I did. Love the boat and the 4stroke. Use about 1/3 of the gas I did in old boat too, FLC
@BassGeek
@BassGeek 5 лет назад
@@FishingLakeCountry Yeah I've been on the fence for a while. Buy new or just repower. I think I'll end up repowering the old triton. Hey if anyone want's to get me a boat deal I'm open lol
@badboymowersofnorman6011
@badboymowersofnorman6011 8 месяцев назад
Spray wax when Sanding worked beautifully for me. Also baby oil worked great for sanding with water. Baby oil cuts the grime and oxidation quickly.
@BassGeek
@BassGeek 8 месяцев назад
Good tip
@smokymountainjigs1152
@smokymountainjigs1152 5 лет назад
looks great bassgeek. i did mine a few weeks ago. i did exactly what your friend did except i finished with 2000 grit used a wool buffing pad. i also used pro tec nu paint moisturizer and then their polish. yours looks great that flake is really popping now
@BassGeek
@BassGeek 5 лет назад
Awesome tips man. We aren't pro's this is just something we tried and it turned out great. Nice way to perk up an old boat. PS I LOVE YA JIGS.
@smokymountainjigs1152
@smokymountainjigs1152 5 лет назад
@@BassGeek no thats what im saying im def no pro either and think yalls turned out great. Thanks for the kind words. Ps your videos are awesome
@BassGeek
@BassGeek 5 лет назад
10-4 sir I understand. There was another dude who was just a ahole. You totally came about it correctly. Again thanks for the tips and jigs.
@rogerglasco5941
@rogerglasco5941 Год назад
Great video. I was impressed. Thanks
@randymirando4214
@randymirando4214 5 лет назад
Dude looks awesome but a ton of work. Nice job
@BassGeek
@BassGeek 5 лет назад
Yeah it is. But it does look great when ya done
@tlalexander3
@tlalexander3 5 лет назад
Nice! I cant wait to do this to my new skeeter. I just bought a 99 zx185C that looks very similar to yours. However mine is primarily a deep burgundy red and has black trim. It looks a little rough, but not quite as bad as yours did in the beginning. I detail cars so I figure I can probably do my new boat as well
@BassGeek
@BassGeek 5 лет назад
Good deal and keep us posted how it turns out.
@jaredkemperfishing
@jaredkemperfishing 5 лет назад
Great job and tip guys!!
@BassGeek
@BassGeek 5 лет назад
Thanks brother.
@TackleJunky81
@TackleJunky81 5 лет назад
Nice job, Jeremy!
@BassGeek
@BassGeek 5 лет назад
Lol what about me?
@stevenguthriefishing6857
@stevenguthriefishing6857 5 лет назад
Good camera work @bassgeek
@BassGeek
@BassGeek 5 лет назад
@@stevenguthriefishing6857 Yeah one of the Real RU-vidrs should hire me as a camera guy. lol
@stevenguthriefishing6857
@stevenguthriefishing6857 5 лет назад
Yeah maybe mike watts could hire you so he can concentrate on out fishing tackle junkie 81 lol 😂
@BassGeek
@BassGeek 5 лет назад
Steven Guthrie Fishing Lol What’s the Pay Watts????
@chrismccartney8668
@chrismccartney8668 4 года назад
Will follow your process Hunter Horizon 23 Sailboat Kept Essex Coast I live in London...
@BassGeek
@BassGeek 4 года назад
Chris McCartney Hello London! Good luck!
@joeyTR21X
@joeyTR21X 5 лет назад
Great video. I definitely needed some info on this technique.
@BassGeek
@BassGeek 5 лет назад
Yeah you wait till ya see mine you won’t want to be seen in it. Lol
@freshtendrills5969
@freshtendrills5969 4 месяца назад
This will work for a boat that you use on the regular, but if youre restoring an old boat, you wont be able to hand sand the oxidation off. Youll need to wet sand with an orbitor.
@BassGeek
@BassGeek 4 месяца назад
Yeah we were wet sanding it but your right you might need a orbiter but you have to be careful not to get to the paint
@bobwilliamson2828
@bobwilliamson2828 5 лет назад
Hank, that's why I like my aluminum Triton, treat it like a car paint job. Wash & wax
@BassGeek
@BassGeek 5 лет назад
If we where smart that's what we all would be running. lol
@horacelee880
@horacelee880 5 лет назад
Great video Guy`s!!
@BassGeek
@BassGeek 5 лет назад
Thank you sir.
@safetyman3
@safetyman3 Год назад
Great job guys! Jeremy, can you recommend a wax brand that would be good to use after buffing?
@BassGeek
@BassGeek Год назад
I’ll make sure he see’s this
@kemicalx17
@kemicalx17 Год назад
Nice job
@BassGeek
@BassGeek Год назад
Thanks
@willperryman4559
@willperryman4559 5 лет назад
Hey Hey Hank, how ya like the Fun at Cherokee this week ? 😉🎣👍🎣
@BassGeek
@BassGeek 5 лет назад
I figured they would be bedding. I’ll be on a little lake just east of them and I hope the same thing is going on
@MrBilydee
@MrBilydee 4 года назад
On my boat the white paint is yellowing (mainly at the top of the boat) will this method be effective for the yellow areas. You made that look easy.Nice video .
@BassGeek
@BassGeek 4 года назад
It is really. I’m not sure about the yellowing.
@Local_Boydidgood
@Local_Boydidgood 3 года назад
Please watch ANY of my videos and never wetsand again, ever. It's a great vid, you guys did a great job bringing back the surface but I'm telling you that you didn't need to do any of that. Well, most of that.
@BassGeek
@BassGeek 3 года назад
Hey sure.
@brandona19881
@brandona19881 4 года назад
What is a brand of wax would you use? Thanks guys, great how to video!
@BassGeek
@BassGeek 4 года назад
Mothers makes some there are a lot of new "boat" or "marine" waxes out there now and NuFinish is another good one. Just be sure it's save for Gel Coats.
@JoseMartinez-dq4km
@JoseMartinez-dq4km 5 лет назад
Great video
@BassGeek
@BassGeek 5 лет назад
Thank you sir.
@peterfurek9392
@peterfurek9392 21 день назад
THANK YOU MY BROTHERS
@BassGeek
@BassGeek 21 день назад
Thank you.
@duckhead0
@duckhead0 5 лет назад
nice guys! so i refurbished my 14’ fiberglass boat meaning sanded, repaired deep scratches with materials from jamestown distributors in RI. then painted the boat a dirty tan and finally added my camo stencils. my question is there a good spray on uv inhibitor you can recommend? how about keith poche today huh? lol fantastic!
@BassGeek
@BassGeek 5 лет назад
Meguiars makes a whole line of stuff. That's who most guys I know that have done this use.
@duckhead0
@duckhead0 5 лет назад
BassGeek yep yep that’s what i was thinking. low and behold i have some n the garage
@BassGeek
@BassGeek 5 лет назад
@@duckhead0 Be sure it's safe for gel coats.
@bafishing8796
@bafishing8796 5 лет назад
great video buddy
@BassGeek
@BassGeek 5 лет назад
Thanks man you tha dude!
@HortonBaits
@HortonBaits 5 лет назад
Great video 👍 keep it up
@BassGeek
@BassGeek 5 лет назад
Thanks man.
@poppy.fishing
@poppy.fishing 4 года назад
I was worried what it looks like now one year later. Can you do a follow up video or pictures?
@BassGeek
@BassGeek 4 года назад
Yeah that would great. It still looks awesome however.
@poppy.fishing
@poppy.fishing 4 года назад
@@BassGeek However...?
@BassGeek
@BassGeek 4 года назад
Vaughan Littleton Sorry nothing after that It still looks great. Hahaha
@davidfrank2824
@davidfrank2824 3 года назад
That really turned out well. You did a fantastic job. Where did you find that sanding block with the two different grits on it? I thought that was pretty slick I've never seen anything like that. Of course I've really never looked hard seeing that until now that I now know it exists. The pad that you use with the machine is it a special grit? I know certain colors of pads are used for different things but is the one you use just a general purpose one that you could use for almost anything as far as applying wax or compound. Thanks for sharing your knowledge you really did make it look easy.
@BassGeek
@BassGeek 3 года назад
Thank you we just found it at Lowes.
@davidfrank2824
@davidfrank2824 3 года назад
@@BassGeek thank you my friend I'm going to head to their website right now. Appreciate the information and appreciate you taking the time to answer.
@tylerleachman4133
@tylerleachman4133 5 лет назад
I am fishing lake Cumberland this weekend, I know there is going to be a cold front that will take the air temperature from 70 to 50. But I know there is going to be a full moon so what do you think I should do
@BassGeek
@BassGeek 5 лет назад
I would say they will eat like crazy and be ready to bed.
@safetyman3
@safetyman3 20 дней назад
I followed the steps in the video and seem to have some pretty good results. Then within a few weeks, the fiberglass feels rough again and has lost luster. Do I need to go back over it again using the same method or is there something else I may be missing?
@BassGeek
@BassGeek 20 дней назад
You will have to keep a good wax on it
@safetyman3
@safetyman3 16 дней назад
@@BassGeek is there a wax you recommend? Thanks!
@shrtmchl
@shrtmchl 4 года назад
I'm looking on a video for replacing boat lids??
@BassGeek
@BassGeek 4 года назад
That's one I don't have. Sorry.
@CodySeeberFishing
@CodySeeberFishing 5 лет назад
Very informative I need to do this to mine lol
@BassGeek
@BassGeek 5 лет назад
Lol yours looked good the last time I was on it
@kro527
@kro527 2 года назад
Is it Necessary to sand first? I'm trying to clean my husband's boat and afraid to mess things up. You just take 2000 grit sandpaper over it lightly?
@BassGeek
@BassGeek 2 года назад
Yeah just a little and wet sand only
@rastagrastag9496
@rastagrastag9496 4 года назад
So the key is to wet sand with 1000 to 2000 grit paper then use your pgoduct
@BassGeek
@BassGeek 4 года назад
Yeah just go a fine with the sand paper as you can. Then seal it with a good wax that's safe for gelcoats.
@LugnutsCarCare
@LugnutsCarCare 4 года назад
You don't need sandpaper unless it's severely oxidized. Wool pad and compound will work great. You want to leave as much gel-coat as you can. Sandpaper will remove some of that.
@seanconley9784
@seanconley9784 4 года назад
Hey guys. About to do this to 89 Procraft fish and ski. What do you use to clean out the black run rail?
@BassGeek
@BassGeek 4 года назад
Let me see what he used. I'll get back to ya on that one.
@seanconley9784
@seanconley9784 4 года назад
BassGeek and where did you catch that Muskie in the intro? Haven’t fished for those since moving from Kentucky!!!
@BassGeek
@BassGeek 4 года назад
@@seanconley9784 Man that's a little lake I keep secret sorry. It's public but it's super small.
@seanconley9784
@seanconley9784 4 года назад
BassGeek Hey If it’s loaded with Musk’s I would too!!! Lol
@Hunter-hv7ei
@Hunter-hv7ei 4 года назад
Where did you get those foam buffing pads
@BassGeek
@BassGeek 4 года назад
I'm not sure where my buddy picked those up at. Sorry.
@thomasjml82
@thomasjml82 3 года назад
I’m afraid my paint is too far gone. It’s all rough and faded.
@BassGeek
@BassGeek 3 года назад
Mine is on my boat. Try it on a small spot I mean you won’t hurt it but you will know for sure
@ourv9603
@ourv9603 2 года назад
Of Course we could leave our boats oxidized & tell everyone we had it sprayed with matte. !
@BassGeek
@BassGeek 2 года назад
That’s what I’m gonna say about mine lol
@MySpinner
@MySpinner 5 лет назад
Hey bass geek when fishing 20 feet of water what oz tungsten would you use on a t rig with neither a craw or creature bait peg or un peg?
@BassGeek
@BassGeek 5 лет назад
MyTopSpinner depending on current, wind, bait, etc. any were from. 1/4 to a 1/2 with the 3/8 being the starting point
@MySpinner
@MySpinner 5 лет назад
@@BassGeek oh ok. Do you peg it or not throwing it open water
@BassGeek
@BassGeek 5 лет назад
Open I don’t peg or peg a foot or two up
@garystephens9909
@garystephens9909 4 года назад
Can you recommend a good wax
@BassGeek
@BassGeek 4 года назад
Mothers makes a good one and the liquid nu finish is good. Just make sure it is safe for Gel Coats.
@royroth5310
@royroth5310 5 лет назад
SO WHAT ABOUT - ALUMINUM & CHROME ?
@jeremyp1748
@jeremyp1748 5 лет назад
Roy, I would give Brasso or Never Dull a try first. Both products are great for cleaning and polishing bare metals.
@BassGeek
@BassGeek 11 месяцев назад
Jeremy is the man
@timmythewoo9742
@timmythewoo9742 5 лет назад
nice
@BassGeek
@BassGeek 5 лет назад
Oh yeah.
@TheGnthreman
@TheGnthreman 4 года назад
What boat is that?
@BassGeek
@BassGeek 4 года назад
That's a Skeeter I don't remember the year it's a buddys.
@bassnazi4713
@bassnazi4713 5 лет назад
Lol was easy to tell where the dislike come from.
@BassGeek
@BassGeek 5 лет назад
Bass Nazi LOL Yeah I don’t mind constructively criticizing the video but no need to be a dick. As the old saying goes there’s more than one way to skin a cat. Lol thanks man
@bassnazi4713
@bassnazi4713 5 лет назад
@@BassGeek lol trust me i get exactly what you mean, but I was honestly surprised they actually left a comment to begin with instead of just thumbs down.
@gregpalmer7773
@gregpalmer7773 5 лет назад
What if the oxidation is so bad that it’s got your boat looking a different color?
@BassGeek
@BassGeek 5 лет назад
At a point you can't sand anymore. It becomes a job for a pro. My boat is at that point. I just say oh well as long as the fish still bite I'm still gonna fish it. hahaha Sorry.
@shaneroper477
@shaneroper477 4 года назад
Stress cracks! I see stress cracks! Lol sorry
@BassGeek
@BassGeek 4 года назад
Maybe in my face lol
@nicocua6002
@nicocua6002 3 года назад
JESUS CHRIST LOVES YOU SO MUCH!!!
@BassGeek
@BassGeek 3 года назад
yes indeed. thanks
@nicocua6002
@nicocua6002 3 года назад
JESUS CHRIST IS THE WAY THE TRUTH AND THE LIFE!!!!
@BassGeek
@BassGeek 3 года назад
Amen
Далее
HOW TO WETSAND AND POLISH OXIDATION OUT OF A BOAT
13:03
How Many Twins Can You Spot?
00:17
Просмотров 19 млн
How To Re-Gel Coat A Boat - DIY Cheapest & Easiest
36:50
Gelcoat restoration  | removing heavy oxidation  2020
18:53