Repair and Refresh 29 Year Old METABO Drill

Подписаться 1,3 млн

Просмотров 419 тыс.

50% 1

Hi. My name is Darek and in this video I'll show you how I Repair and Refresh the 30 Year Old METABO Drill.
The drill Metabo Sb Edv1000-2-S has a power of 1010 watts, two gears,the stroke and electronic power control system and the speed.
This means that, under the load, it adds itself to the power to keep the set rotations.
The repair wasn't so simple as I expected after the first start.
Had to connect a new wire, clean the switch contacts, replace the gearbox lubricant, unlock the chuck, clean the whole and ready.
The tool is very powerful and made from very high quality materials. If you want to buy a really good and chip drill search for old tools and bring them to good condition.
If you liked this video, click thumbs up and share it with your friends:)
--------------------------------------------------------------------------
Follow me on:
INSTAGRAM made_inpoland
FACEBOOK 1187887134621389/
--------------------------------------------------------------------------
Business contact: darus627@gmail.com

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 350

@MadeinPolandChannel 6 лет назад

Consider supporting us on RU-vid by using the button "JOIN" or click on this link: ru-vid.com/show-UC8KQ6_RNAvc7a3B5hZ980iQjoin

@bkk06ust 4 года назад

Thanks for your efforts to put this out. It’s a fantastic drill. I have one for over 30 years and managed to restore it thanks to your very clear and complete video.

@porzech6218 7 лет назад

dwa tygodnie temu wysiadl nasz kärcher, normalne po okresie gwarancji😂😂ale za to dostalem od sasiada jego starego z 92 roku ktorego juz nie uzywal,zdziwilo mnie ze nawet grubosc kabli byla dwa razy taka jak w moim z 2015 a cisnienie nadal dawalo rade zrywac farbe ze starej blachy, szacun dla tych co cenia dobra technike,pozdro

@MadeinPolandChannel 7 лет назад

zazdroszczę takiego sąsiada :D Stare sprzęty są naprawdę dobre, podejrzewam, że twój nowy (stary) 25 letni kärcher pociągnie przynajmniej kilka lat. Pozdro ;)

@Loszmi 7 лет назад

Ja właśnie odrestaurowałem odkurzacz Gisowatt Niagara. Boje się, że mi wciągnie dywan. Ma ze 30 lat. Z czego 15 używany był bez worka i filtra ;-) Uwierzycie?

@MadeinPolandChannel 7 лет назад

Powiedz proszę, do czego był używany bez worka i filtra, bo nie mogę tego pojąć :D

@Loszmi 7 лет назад

Made in Poland Do odkurzania domu. Pierwsza dawka sierści psa i kurzu zapchała wyloty z turbiny, ale to mu zupełnie nie przeszkadzało. zacząl się zapełniać pojemnik, kurz przyczepiał do kurzu i utworzyła się poducha, która nie wpuszczała reszty do środka i nadal działal :-) W końcu z kubła wyciągnąłem sprasowany krąg filcu :-)

@MadeinPolandChannel 7 лет назад

O kurde! To niezły przypadek Ci się trafił xd Dobrze, że dało się go odratować :)

@lukaspozarro5564 4 года назад

Metabo una de las maquinas mejores del mundo.

@dezsokosa9182 3 года назад

Absolutely true!

@zorro587 7 лет назад

Another fine job mate

@shakirahmed2427 2 года назад

Good

@cyrus13383 7 лет назад

Wicked man. Cool beats too!

@medeirossergio9924 3 года назад

Nice video Darek, I have a Metabo Rotary Hammer Drill 1118b and I'm looking for the switch, do you have one or know where I could find one?

@kanalisationerstellen 2 года назад

have you asked Metabo service?

@Ncky 6 лет назад

If you have printer try to print a new label and glue it on :D

@max_kovernik 7 лет назад

Вещь!

@OneCosmic749 7 лет назад

What are the names of the songs used in this video?

@pistonsservice4561 7 лет назад

gdzie można kupić takie elektronarzędzia?

@MadeinPolandChannel 7 лет назад

Na allegro, czy olx jest ich pełno :)

@PHLEX20008 3 года назад

По любому не кетай. Даже рядом с кетаем не плавала, если ей правда 29 лет.

@ivancho5854 4 года назад

That's a really well made drill. Worth restoring - you literally can't buy a new drill which is as good. Well done. 👍

@patrickredmond1479 3 года назад

I've got the same model, bought it new 30 years ago still going strong. The safety clutch on these is great feature, not seen on many new drills, saves breaking the drill bit if it jams, or throwing you off a ladder. I'll never sell it...

@ZS6JMP 6 лет назад

Funny thing is, none of this is difficult. Yet people would rather chuck it in the bin, than have a look.

@kennyrademeyer4836 6 лет назад

ZS6JMP I agree. The engineering was such that you can fix it and it will last another 30 years. Todays Chinese crap is just that. CRAP. I refurbish the old Kenwood Chefs. (made in England) 50 to 60 years old) Will last another 50 years.

@dominikkkkkkkkkkkkk 5 лет назад

you can still repair many things today, some things will never change

@7219carlos 5 лет назад

CC catch

@XperiaVideosCR 4 года назад

It´s not difficult but you need to have certain tools to fix it right as in this video. A Phillips screwdriver is not enough!

@nastro855 7 лет назад

next video repair and refreshing your cellphone, lol

@MadeinPolandChannel 7 лет назад

hahaha I'm still wondering how it's possible that it's still working :D

@randymagnum6680 7 лет назад

Nice work. I love the irony of RU-vid showing me ads for buying a new metabo drill when I'm clearly interested in the restoration of an existing one.

@Airforce1Gunny 5 лет назад

Music is unbelievably annoying.

@rea50 6 лет назад

Best drill I have worked with ever!

@Priest 4 года назад

They just dont make them like they used to. I cant believe how good old tools are, luckily I was able to use this drill and also few other 20+ year old tools and I was amazed, the difference in quality vs todays tools is day and night

@MultiLobzik 3 года назад

I have 2 of those, one Sb Edv1000 and another is 700, which looks almost brand new. Will try to restore the 1000 according to your video. Thanks!) Which lubricant is best for those drills? Made in West Germany))

@CSNK2008 4 года назад

My father gives me his drill, the same one, 10 years ago, he had it for 30+ years... And for the fist time the drill refuse to work... And it just an open wire in the main alimentation cable... Everything inside is PERFECT! 30 yo and the bearing and motor is in a very good shape! They know how to make stuff!

@ricardoalarcon8562 7 лет назад

You forgot to grease the grease

@barryonefull728 6 лет назад

This looks like a Real drill not like todays drills that look like kids toys.

@lewiemcneely9143 6 лет назад

People just don't take care of things but I suppose that's good for us. Get good stuff cheap and fix up to really work. Metabo makes really tough stuff. Good job!

@rupert5390 7 лет назад

Magnificent job - great german tech - that will last 100years - over here in aussie we get the choice between asian crap or 1000 dollar festo - it is such a pity all the manufacturing is lost from europe - Aust and USA. very good of you to rescue a really nice tool.

@PErik-sq9rv 7 лет назад

Gez 13 festtool is shit as fuck

@thundernerdt 7 лет назад

Consumer powertools are definitally pieces of crapp these days. You should go for the professional series used by construction workers, but even these have a lower lifespan than powertools made decades ago. Purly a choice of manufacturers to reduce costs and sell more in the same time.

@ZerokillerOppel1 7 лет назад

Gez 13 This type of drill is still for sale in Europe and almost unaltered. I have almost exactly the same but mine is 12 years old. These things are virtually bomb proof.

@ZerokillerOppel1 7 лет назад

Gez 13 You want the European topbrand: Fein. You want US topbrand: Milwaukee. You want Japanese topbrand: Hitachi.You want an affordable Eu. top brand: Metabo. For US: DeWalt. Japanese : Makita

@hemi5463 6 лет назад

China Won't Last Worth A Fuck.

@pjtruslow 7 лет назад

amazing to see how much better drills are today vs in the past. planetary gearboxes are great, and motor design has come a long way.

@mitrovdan 6 лет назад

5:09 What do you use for cleaning tho whole thing up, brake cleaner? I have a gear set that I can't get out, it's an old Black and Decker, can I e-mail you?

@DERKONIG12345 7 лет назад

This drill was certainly beyond its time. Lights to indicate turn direction?!!

@MadeinPolandChannel 7 лет назад

Yes they indicate turn direction :)

@bewareofwil 7 лет назад

9:17 the drill was so happy and excited, his little rocket came shooting out.

@awesomefacepalm 7 лет назад

6:34 Suddenly, ContentCop!

@my520graj 7 лет назад

Full metal gear box, you not gonna see that in new, even "professional" mashines. Great job.

@franktechmaniac7488 Год назад

The quality of Metabo and AEG hammer drills from the late 1970 until 1990s is unattained. I have an AEG from 1980 who's motor is even labeled "S1" - fit for permanent operation. Never seen this with more modern machines. It is rated 600 W and weighs 3.5 kg. All loaded bearing are kept in a metal housing with almost zero play. Even 10 mm holes in steel come out perfectly round.

@DeutscheReichsbah100 7 лет назад

I have the same drill and I love it

@ВикторПутятин-т8щ 5 лет назад

Классная дрель! Вот настоящее немецкое качество!

@gaminggami4138 7 лет назад

i still have the exact same drill used it yesterday metabo has some high quality tools to offer

@thedillestpickle 5 лет назад

Never let go of that drill. I bought a brand new Milwakee drill and killed in 1 hour of use. Inspired me to resurrect the old Metabo drill from 35 years ago. Still works.

@cokhichetao72 4 года назад

Foreign products are of very high quality, and our Vietnamese products are too bad 😁😁

@Mtematiks 7 лет назад

Have the sameone, bought broken, and rewinded the rotor . This is a BIG MACHINE ! Will last a lot longer than any new machine !

@loloaqici82qb4ipp 7 лет назад

A very well-made video and the editing is excellent. I didn't even find the music annoying so that's a good point as well. I like what you do.

@ulfpe 2 месяца назад

I have an ocillating sanding machine from Matabo that my father bought sometime around 1965 and its still working..a bit heavy but

@ГлебНехорошев-ц7ы 5 лет назад

Вторая жизнь инструмента. Еще послужит. Всех благ. Всем добра.

@ManueldelaFe 2 месяца назад

Thanks for the video. I used it to assembly a Metabo Driller successfully.

@cnclathe21 7 лет назад

Nice job!!! I liked that you cleaned everythink!!! Nice mate

@ChrisDeBoar 5 лет назад

Kiedyś to kurła robiły narzędzia... Rozebrałem Celmę PRCr 350W po jakichś 4 dekadach i nawet łożyska nie wymagały wymiany ! Ale skrzynię to bym na twoim miejscu wypolerował a plastiki opalarką.

@abdulrazakismail6890 3 года назад

can u please advice which model same like sb edv1000-2 tq razak from Malaysia

@villepyykonen9664 7 лет назад

Awesome video! My dad bought the same drill ~30yrs ago and its still in mint condition. And that drill is so powerful that it literally cut my big brother's finger and he lost it. Luckily he lost "only" about 3cm of that finger :D

@MadeinPolandChannel 7 лет назад

ohhh I'm sorry about your brother ;/ With these drillers you really have to be careful, some time ago the AEG drill almost broke my fingers: D

@danielharmon9314 7 лет назад

Damn dude you made that thing look brand new. Great job!

@richardatordido1351 Год назад

Hi can I know the mosfet code in this board? I can't view mine properly

@futureoftheearth8100 Год назад

This one I've already bought. Happy like elephant

@mehdichifaoui6501 3 года назад

Comment utilisé la partie électronique de METabo meuleuse We24230X

@pheenix42 7 лет назад

I'm amazed you were able to get all those wires connected correctly again!

@MadeinPolandChannel 7 лет назад

It just looks like that. The connection is very simple :)

@b3hulk 7 лет назад

What grease are you using also what solvent cleaner ? Awesome job!

@MadeinPolandChannel 7 лет назад

I use grease for bearings and for cleaning I use wd-40 and gasoline :)

@GodLikeMeAgain 7 лет назад

me compre un montón de herramientas DeWalt y ahora me doy cuenta que podía reparar las herramientas de mi abuelo y haberme comprado una Tv de 90"

@abdulrazakismail6890 3 года назад

hallo what is simillar new model for this metabo sb edv1000-2

@gabrieletomei121 Год назад

O un problema, il mandarino non si aggancia bene allingranaggio del indotto che dovrebbe farlo girare e per tanto indotto gira ma il mandarino non si aggancia e gira a vuoto. Quale potrebbe essere il problema

@tuftler6807 6 лет назад

Da ist noch richtiges fett drin

@bluemantom77 2 года назад

I have the same chuck on my Milwaukee 0228-1

@РомкозКоломиї 3 года назад

Привіт,який партійний номер щіток для такої дрелі,хто знає підкажіть.

@Павелгроза-л6ш 5 лет назад

добрый вечер мне понравелось ваше видео с ремонтом длери уменя проблема згорела плата скнопой подскажыте где купить плату

@michikopka 6 лет назад

hey, i have exactly this drill but still in as new condition ... great machine.

@lordandal 4 года назад

Do you know what the the red signal light in the middle means?

@Mentorcase 7 лет назад

I have a metabo drill looks a lot like that but it has the reverse on the brushes and you move the brushes to 2 different positions to change rotation, the variable speed trigger was U/S so I ordered a new replacement and fitted it and it ran correctly for 5 minutes and then died again, only worked on full speed, so I bought a cheap Chinese replacement variable speed trigger for $7 delivered and it has been running for 2 years now and I still have a second spare 1.

@melvis2017 3 года назад

the sound is from the terrible music or the machine it self.

@melvis2017 3 года назад

terrible music move it from the backyard.

@aethertech 7 лет назад

Release the schmoo!

@Sushimitzu 3 года назад

I found a drill of this type at a scrapyard. This video greatly helped me restoring it. Thank you!

@maciejobama8600 6 лет назад

Fajnie że robisz takie rzeczy

@robinrandy 7 лет назад

this is how smart people work

@ambrusgergely 7 лет назад

nice work. this metabo is a very good drill. i have one too

@futureoftheearth8100 Год назад

Me too.. I've got day ago. It's great question here...why so old instruments are still working, and brand new metabo don't survive during two years

@ciogon 6 лет назад

METABO...one of the greatest hardcore machine..ever..!next to milwakee...i own this brand...its buletproof...and Im abusing it...doesnt fail....they dont have great sf designs...but trust me...they do hard work..

@hassanaba6332 5 лет назад

why you don't repair you iphone it's easy to do

@kanalisationerstellen 2 года назад

nice :P bought the newer SBE 780 still made in the same fabric, hope it stays amazing

@crnogor 7 лет назад

No thumb up , cos y just dispart , clean , grease and part drill old 30y ! Those old tools was build to last ! No bearing check , what ewer , they should be changed , may not all , spec on percussion drill who was lot used for work in stone and beton ! Forget about chuck after 30 years , worn out for sure ! Y didn't test it by hand twisting slow and looking on each of 3 jaws , how they behave ....

@cristovaoguerreiro 4 года назад

Good job! I have an old Metabo 0169/4s Automatic but doesn't have variable speed like this one that you repair. Can you tell me if i can install one?

@carlogrigioni1947 2 года назад

Il mio accende la spia rossa tra le frecce di direzione

@spogas 6 лет назад

That crappy grease... it is only good for door hinges, but not for high speed spinning parts. The only good thing about it is that convenient package. Great job though!

@CarlinLusk 6 лет назад

Woah, what kind of grease dispenser/gun/applicator is that? New to me...

@melvis2017 3 года назад

are in disco or u are reparing an old shiiit

@vladimirckiyorel 7 лет назад

видео класс, музыка космос! спасибо.

@Yavinonche 6 лет назад

I have a Bosch drill very similar to this one, but i can't get the damn chuck off the shaft even though it's only threaded on according to the technical drawing :(

@AndrewBrowner 7 лет назад

just skipped though video quickly since there was no audio, whats with the field windings? did i miss something or is this on old design or different technology i seen them only on one side with a U shape laminated iron piece, im used to the ones that are a full circle usually with 2 distinct winding sets 180 degrees apart any pros cons to how this drill did it vs new ones

@laylaylooom 6 лет назад

2:26 alt yazıyı açınca "AK partiyi" ara yazıyor amk as bayrakları as :))

@селоИвановка 6 лет назад

I would then not be able to collect correctly-I always have.Remain even extra parts

@0takedown588 Год назад

What grease do you use for the gears?

@jorgenlannock 6 лет назад

i wished i lived at a place where trash like that could be found 😁.

@photonic_induction2633 6 лет назад

Oh he didnt take it he stole it

@MikeyGato 4 года назад

What du you use to clean and refresh the plastic parts? Anybody has a good advise for me?

@nidal1475 5 лет назад

i know its not the best restoration in the world, but it was a great restoration & if i were you, i would've taken more time to restore it completely, but you did a great job keep it up brother👍

@shiro-r4m 7 лет назад

I have a spare drill chuck exactly like that! I'm planning to take it apart entirely and clean it out from the inside because it struggles to reaches the end of travel.

@aaliyahsavage6841 6 лет назад

5:09 what's that, water? What brand lubricating oil did you use.

@AdrianO-cq5dk 7 лет назад

Weź poszukaj jakiegoś lepszego podkładu muzycznego do swoich filmików :P, ogólnie to mega kanał masz :P

@JanJan-ys9uq 7 лет назад

Filmik bardzo fajny, ale mała uwaga - miej litość i wgrywaj jakąś spokojną muzykę bo od tego plumkania i stękania niektórym odechciewa się oglądać. Co do samej wiertarki, to po czyszczeniu silnik chodzi z mniejszymi zgrzytami niż moja dwuletnia AEG.

@obfuscated3090 6 лет назад

Automotive "disc brake wheel bearing grease" (there are many) is just right for power tool gearboxes, many of which lack enough lube from the factory.