Repair Your Broken, Cracked, Or Curved Glass With Renee Romeo

Подписаться 28 тыс.

Просмотров 252 тыс.

50% 1

#reneeromeodiy #reneeromeo www.reneeromeo.com
Repair Your Broken, Cracked or Curved Glass with Renee Romeo
reneeromeo.com/2018/08/10/cle...
reneeromeo.com/2018/05/11/hon...
reneeromeo.com/2018/03/01/ind...
reneeromeo.com/2018/01/30/rev...
reneeromeo.com/2017/12/08/my-...
reneeromeo.com/2017/11/17/my-...
reneeromeo.com/2017/11/07/my-...
reneeromeo.com/2017/10/24/row...
reneeromeo.com/2017/08/09/my-...
reneeromeo.com/2017/07/11/viy...
reneeromeo.com/2017/07/04/rev...
reneeromeo.com/2017/06/20/my-...
reneeromeo.com/2017/05/31/hon...
reneeromeo.com/2017/04/19/the...
reneeromeo.com/2017/04/12/my-...
Ever wonder how to Fix Broken, Cracked or Curved Glass?
Do you want to know how to fix broken, cracked or curved glass? In today's instructional video, I have two new products to test for repairing broken glass. This is an experiment for me because I'm looking for a neat repair for a piece of broken curved glass. Broken curved glass is very expensive to replace. In many cases, the glass panel exceeds the cost of the entire furniture cabinet. My curio cabinet is no exception. I'm hoping for a repair that doesn't call attention to the repair. Maybe my experiment will exceed my expectation.
Save a LOT of $$$
I like my curio cabinet. It serves a nice purpose in my upstairs hallway and holds a lot of memorabilia. I hate the thought of trashing it just because it has a broken pane of glass. There are many products that repair glass but which one does the best job at making a discreet repair? The problem that I foresee is light reflecting on the broken edge. My chemist nephew tells me that if I know the compounds used in the glass, then I can make an invisible repair. Honestly, that's not going to happen because the manufacturer of the curio is out of business. Such is the case with many antiques as well.
I'll teach you how to fix broken, cracked or curved glass!
My glass repair technique will fix the break but will it fix the appearance too? If this works, I can think of many practical uses for the products that I'm trying: Clear Gorilla Glue and a DIY Windshield Repair Kit. Which product do I like best? Is resin even adhesive? Are they good enough to use alone or do I need to combine them for better results? Give this video a view and see for yourself! You don't need any special tools. All you need is a sunny day, warm weather and this materials list. Let's see how to fix broken or cracked glass...The DIY site that teaches you how to create and succeed with all projects around the home. www.reneeromeo.com
fix curved glass, fix broken glass, repair glass, repair glass crack, how to fix glass, repair your broken cracked or curved glass with renee romeo, broken glassware, renee romeo, glue glass together, repair glass window, glass repair glue, glue glass to glass, glue glass repair, fix broken window glass, glass repair resin, glass repair kit, glass repair kit windshield, windshield repair, thespanglereffect, glass, piano and science guy, The canadian chemist, Diy crafts

Хобби

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 137

@nancystaggs8605 5 лет назад

Beautiful cabinet, my Mom has a secretary's desk that has bent glass and we were talking one day about replacing that glass and we looked it up, and it was $1700 dollars just for a small piece, so I see why you would fix it yourself if can. That is a talent I would never think to it by myself. Great video!

@ReneeRomeo 5 лет назад

Nancy, After all my research, I think the business to get into is making curved glass! Wow - I was shocked by the pricing too!! Thank goodness for the chemists that came up with these strong (nearly undetectable) adhesives. It saved my cabinet from the trash heap because one piece of curved glass costs more than the entire cabinet. I happen to love it too so I'd be heart broken. Thanks for the nice note! Renee

@christineamina8789 3 года назад

Hi Renee, thank you so much for sharing! You explained to us the process really well and it’s given me the confidence to give it a crack! I wish you all the best 🌸

@ReneeRomeo 3 года назад

Hi Christine, Thank you for the kind words! I saved a TON of money in glass replacement costs - the glass would have cost almost as much as the cabinet!! You'll be pleased with the results too. Best wishes with your repair, Renee

@ninad4570 4 года назад

HiRenee! Thanks much for the great video! My favorite goblet base just completely broke soo bout to try these suggestions! ThankUuu :D

@ReneeRomeo 4 года назад

Nina B, Thank YOU for letting me know how you'll be using this repair video. I'm always curious to hear what kinds of glass items are being repaired. I hope your project goes as well as mine did and you have your favorite goblet back! All the best to you, Renee

@tonymartin6088 3 года назад

Hi Renee, Kept repeating this video, it worked on repairing induction hob cracked on corner. Happy days.

@ReneeRomeo 3 года назад

Tony. Thank you for taking the time and sending your great feedback! I'm happy to help out with your situation. I hope it saved you a good bit of money too - enough for a nice dinner somewhere? All the best, Renee

@singleabroad1358 4 года назад

Thank you so much ,it's very useful for me.

@ReneeRomeo 4 года назад

Hi Sway Agency, I'm so happy to help! This process saved me a bunch of money. It looks great. All the best, Renee

@nicole_beaumont 5 лет назад

I’m glad I saw this before I potentially butchered the repair on one of my massive hand blown glass hurricane lanterns that I accidentally broke the glass stem off whilst cleaning..😩 Thankfully I have a matching pair, I’ll try to repair the one that broke, but seems they were two of my favourite pieces in my home I think I’ll be feeling that imperfection deeply with guilt every time I look at it in the years to come 😭 Thanks for sharing this video, very helpful!

@ReneeRomeo 5 лет назад

Nicole, I feel your pain! Thankfully, I think this solution will have you feeling happy with accomplishment. I positioned my repair so that it's in the least noticeable spot on the room - that will help with any light refraction issues too. I'm overjoyed with my repair. You will be too!! All the best, Renee

@jamelofswords 2 года назад

Thank you for this video! Very helpful!! 💜💜💜

@ReneeRomeo 2 года назад

JaMel of Swords, You're very kind. Best wishes, Renee

@jonesba2004 3 года назад

Hello. I have an antique reverse-painted light-up glass bar sign with a clean break through the middle. I’ve been looking for a method to repair, as it can’t be replaced. I’ve tried various glass glues, but none hold and the crack is still very visible if it does. Yours is the first method I’ve seen that has true potential to fix my item. One side is painted, so I won’t be able to scrape any overflow. I’ll have to just be extra careful. Thanks for giving me hope!

@U2fan24 4 года назад

There's this spray stuff that you can spray on glass and windows to make them foggy. I found that if you have two broken pieces, you can spray some window fog into the spray bottle cap or a tinfoil tray and let it pool up a bit. Then paint or dab it onto the broken edges using a thin paint brush or Q-tip. THEN once the fog sets, use epoxy on both pieces to place the glass back together. Wait about 5 mins to clean the excess with acetone. Then wait about 12 hours before testing the durability. You'll still see a crack, but because of the window fog it won't reflect the light on the broken edges. I find that helps hide the crack really well.

@ReneeRomeo 4 года назад

Hi Aaron, Excellent idea!! I'm so happy that you shared this information. It'll help the rest of us get even better results. Thanks for taking the time. All the best, Renee

@kdanaher11 2 года назад

do you happen to know the name of the glass/window fog spray?

@kdanaher11 2 года назад

trying to fix a 3ft crack in a mirror-need all the luck I can get! thanks

@hassanbazzi3545 Год назад

Well done. Thank you for sharing

@ReneeRomeo Год назад

You're very kind! All the best with your project too, Renee

@BillyLoweBeauty 4 года назад

Renee I love this video. You make projects (some may see it as “a guys job”) seem so doable even for “not so guy” Guys like me.

@BillyLoweBeauty 4 года назад

And thanks for showing the error and how to fix

@ReneeRomeo 4 года назад

Hi Billy! Thank you for the very kind words! I just like trying anything and everything that will save me from having to spend money on calling in a pro. Especially when it saves big money - like this project. It's always better to spend the money on fluffy stuff (as I like to call it) than the stuff that was perfect until it got broken. I call THAT "Reneeconomics" LOL You're a dear, Renee

@gordonadams5891 3 года назад

My understanding of how chipped auto glass repair works is a plastic sheet is laminated between 2 layers of glass. When chipped, the plastic is exposed. The repair resin bonds with the plastic, not the glass, to affect the repair.

@ReneeRomeo 3 года назад

Hi Gordon, Your understanding is better than mine. I don't know how this works but it does. I used it on my truck windshield and it worked perfectly. The interior glass was perfect with Gorilla glue. I hope this helps! All the best, Renee

@taichikdc 4 года назад

Great video!

@ReneeRomeo 4 года назад

taichikdc, I hope this saves you some time and frustration! It saved me tons of money. Thank you for the very kind words. I've also repaired my own windshield when it got hit by a stone. Here's the video link in case you're interested: reneeromeo.com/2019/09/20/windshield-chip-repair-near-me-or-diy/ All the best, Renee

@bernadettepesce773 2 года назад

Nifty and inventive

@ReneeRomeo 2 года назад

Thank you for the nice comment Bernadette! All the best, Renee

@NudePostingConspiracyTheories 11 месяцев назад

Do you think i could fix the spider cracks in my vintage drinking glass?? And it be safe. (No breaks, at all just spider- cracks through some part of the glass. And no to the edges, just in the middle around the handle of the art deci glass tankard).

@blackirish781 4 года назад

I use two part epoxy for fixing broken chemistry glassware. Any that is smeared on the glass can easily be wiped off with acetone and a cloth or paper towel.

@ReneeRomeo 4 года назад

the alt-flight, Thank you for this! I've used two part epoxy before but wasn't sure if it would dry without bubbles and have a crystal clear finish. Have you experienced any air bubbles in your glassware? Renee

@katiem4935 3 года назад

This was very helpful, thank you! I was wondering which adhesive would be best to get for fixing some broken crockery, and after finding your video I took your recommendation of clear gorilla glue - it has worked wonderfully, thank you!

@ReneeRomeo 3 года назад

Hi Katie, Thank you for the great feedback! It's so nice to hear when you've actually done it. Clear Gorilla glue has saved so many items around my home from being thrown away. It dries undetectably too. Yay!! So happy to help. Thank YOU! Renee

@katiem4935 3 года назад

@@ReneeRomeo 😄🙌❤️

@frankcicero4444 4 года назад

Thank you for the info. I broke a small piece of glass which covers a 1958 tv / bar wood console . I will use the clear gorilla glue u recommended and hope for the best and the clothes pins is a great idea

@ReneeRomeo 4 года назад

Hi Frank Cicero, I think this method will work perfectly for you. It's worth a try when the alternative is a very expensive custom piece of glass. And...only I would know that there used to be a crack in my curved glass. Best wishes for your TV console too. Please let me know how it goes. Renee

@thomasmcclain8116 3 года назад

Thomas McClain I have a long crack on top of my curved glass that is on top of my curio. Do you suggest I fill the crack with gorilla glue? I just have electrical tape going across the top of the crack to hide it but the tape looks worse than the crack.

@wg7644 4 года назад

Thanks so much - looking to repair a vintage curved boat windshield that broke in two pieces at the terminating corner.

@ReneeRomeo 4 года назад

Hi W G, To be honest, I don't know if this would hold up to a lot of vibration. This is strong enough for stationary obects but I would hate to steer you down the wrong path. If it's not too much trouble to install the windshield and the glass is a lost cause anyway - it's worth a try. Hopefully, you have enough surface area for it to bond really well. I'm keeping my fingers crossed for you! Renee

@wg7644 4 года назад

@@ReneeRomeo I will do some more research but the very corner of the glass is broke - it has really (at that point) straightened out). the problem is that like all vintage glass they are hard to find, expensive and harder to ship and when it arrives it is still a 60 year old windshield with all it's potential to fail LOL. It isn't a speedboat so I think it is worth giving it a shot. I'll post the results if I get her done this way. Thanks

@ReneeRomeo 4 года назад

@@wg7644 Oh good - that's exactly why I repaired mine instead of replacing it. It baffles me why glass is so expensive. It seems that glass making is a excellent career choice. lol So few companies make curved glass too. Yes, I'd love to hear about your results. I'm curious to know if this process holds up on a broken windshield.

@Whitebeard1715 3 года назад

Great idea for windshield chip repair. Ty

@ReneeRomeo 3 года назад

Hi Sam, It did a good job and the crack hasn't spread. I'm happy with the results. Thanks for the comment, Renee

@Whitebeard1715 3 года назад

@@ReneeRomeo I was tempted to try a bondic pen with the uv.light. then. Saw your. Video and thought well. I'll give it a try. LoL your video was very informative. Big thanks.

@ReneeRomeo 3 года назад

@@Whitebeard1715 I've never heard of a bondic pen but I do have a UV light now (after covid) and that would be helpful if you'd like to do this on a cloudy day I suppose. Bright sunlight is best.

@Whitebeard1715 3 года назад

@@ReneeRomeo check the bondic,pen out on RU-vid. Pretty cool.

@ReneeRomeo 3 года назад

@@Whitebeard1715 Now I feel like I need this!! If you try, please let me know how it goes. I think this would work best on plastics, it seems...

@sonilatha1763 4 года назад

Can u please give me the list of material u used

@diamond6256 3 года назад

The gorilla glue never worked for me on glass. Great idea though. I may use epoxy resin on mine and then the glass fix.

@mekars1 Год назад

My mom has the same piece beautiful

@ReneeRomeo Год назад

OOOOh! She has great taste - lol. I hope she's lucky enough to have ot it one piece. All the best, Renee

@garylee4214 2 года назад

will try to repair a crack on a a vintage diner menu sign with this methord. May upgrade to the clear gorilla glue epoxy. Nice video!

@ReneeRomeo 2 года назад

Gary, I really like the Gorilla Glue. Best wishes, Renee

@garylee4214 2 года назад

@@ReneeRomeo Just bought it and the acetone . Will post if I can

@namegoesfirstthenlastname1785 3 года назад

I broke one of my windows and I don't want my parents to find out, gonna try this lol

@ReneeRomeo 3 года назад

OOOHHH!!! This should do the trick. Best of luck to you!! Renee

@namegoesfirstthenlastname1785 3 года назад

@@ReneeRomeo thanks, haha

@ehsun7822 2 года назад

Samee .. it's a small piece at the buttom of the window I hope i can get a solution here.. fix the piece so it doesn't break any further

@anubisgodess2353 2 года назад

Just so I understand this properly for the final repair you use the clear Gorilla Glue, while holding it together with either the clips or tape and then you use the resin from the repair kit to try and patch up some of the remaining cracks or did you only use the Gorilla Glue alone?? Also do you think this would work on glass that isn't necessarily clear like the glass I have is blue

@ReneeRomeo 2 года назад

AnubisGodess 23, Great questions! Yes, I used only the gorilla glue in the end but if you do this and still see some areas that aren't filled, you can always go back with the glass repair kit and fill them in. As far as colored glass is concerned, I don't know if it will matter. If you can get the pieces to mesh together really well I think this could still work. Just clamp, tape or whatever else you can think of to get it to seal tightly. Best wishes! Please let me know how it worked - if you try. Renee

@ellislorant5479 3 года назад

I have a large glass spigot pitcher that is slightly ribbed and has a bit of a crack by the spigot. The glass isn't completely broken but there is a very slight drip. I'm wondering what product(s) you think could work to at least seal it. Would the gorilla glue and windshield repair kit work for this as well you think?

@ReneeRomeo 3 года назад

Hi Ellis, Based on my experience, the Gorilla Glue would be the better bet. It will seep into the crack and stop the leak. You'll be amazed! Please let me know how how it goes. All the best with your repair, Renee

@ellislorant5479 3 года назад

Thank you. Yeah it's visible but you can hardly feel that there is a crack there but water slowly seeps out. I'm renting a space and it belongs to the landlord so hopefully I can fix it up as best as I can so I don't lose any of my deposit :)

@ReneeRomeo 3 года назад

@@ellislorant5479 YES!!!!!

@eekai1986 4 года назад

What product did you use cause i broke a table glass so i need to fix it as soon as posible can you suggest me any product pls

@ReneeRomeo 4 года назад

Aikee Esaus, I used CLEAR Gorilla Glue. Try it - it really works! Renee

@AtomyenBarcelona 4 года назад

i need this product to fix my boss glass fruit base

@ReneeRomeo 4 года назад

Hi Razil and Mark Atomy Miami, This will be a perfect repair for you! It's super strong. Glad to help out. All the best, Renee

@EpitomeofALady22 3 года назад

I need that exact whole piece replaced completely. Where can I find a new piece and get it installed? How did you get it back into the cabinet? It was my mother's, I hate to have the whole cabinet replaced. Please!!😭

@ReneeRomeo 3 года назад

Hi Pavonay, You can have a new piece custom made but it's very likely that you will not be able to find a local company to do it. Van Dyke's Restorers (online) has a service where you send in a tracing of the broken piece and they'll make it for you. I didn't go that route because it was going to cost about $500.00 for the one piece that you saw me repair - almost as much as I paid for the entire cabinet! Then, I would have to install the piece myself. There are small plastic clips that I used to secure mine back in place with tiny screws. You can purchase them through Van Dyke's website too. Best wishes for the restoration of your Mom's cabinet, Renee

@EpitomeofALady22 3 года назад

@@ReneeRomeo thank you! I guess if I have to buy a new one, I may as well buy the glass. If I figure out how to get rest of the broken piece out, I should be able to install a new piece. Maybe I can locate the specs somewhere.

@ReneeRomeo 3 года назад

@@EpitomeofALady22 Is your glass built in (with wood slats in the back)? If so, try using a putty knife to gently coax the wood pieces away from the glass. reinstallation should be straight forward. You can even use clear construction glue instead of tacks/nails to secure it back in place. I hope this works!! Renee

@cahmarcomsonnyk.320 2 года назад

Can you fix broken glass by putting into an oven heated 800c or above. Which apply glue first then put into the oven to melt the pieces. What's the best temperature and bonding material?

@ReneeRomeo 2 года назад

I know that a home oven will not get hot enough to melt glass. Perhaps a blow torch could do it but this sounds like a skill that probably needs much practice to do correctly. If you need strength for your glass, I suggest just getting the piece professionally remade. Renee

@shelbyhambright9543 2 года назад

I'm wondering if it will work with mirrors since the silvering is still on the back

@ReneeRomeo 2 года назад

SHELBY, The repair on mirrors will show, even if the glass looks perfect. The reflective quality seems to accentuate the repair. It's really too bad. Sorry I couldn't help with that one! Renee

@izzulfitri8663 3 года назад

Can I use this method to close the crack on my jar?

@ReneeRomeo 3 года назад

Hi Izzul Fitri, Excellent question! Neither product is thick so they won't fill in missing pieces of glass. The gorilla glue has great adhesion tough so if you have all the pieces, it will create a watertight seal. I hope this helps! Renee

@gabeee4332 Год назад

I have a crystal bowl thats attached to a crystal pedestal underneather the bowl at top of pedestal where it attaches to bowl are a couple of good size chips is there anything you could recommend to fill in the chips? You don't really see the damage too much but it bothers me that its there and I'm wondering I'd like to just full them in...clear gorilla glue or clear resin? I was thinking maybe clear mod podge? Thank you

@ReneeRomeo Год назад

Gabriella, This is an EXCELLENT question! Unfortunately, without the chipped pieces it will be impossible to repair the damage with just gorilla glue or resin. They're both too thin to accomplish what you're going for. I WISH I had a great solution for you but the products that are thick enough require being poured into a form and then let to dry. They won't dry crystal clear either. Ugh! Here's a thought: Put some fresh flowers or greenery around the pedestal and no one will be the wiser! All the best and thank you for your question, Renee

@gabeee4332 Год назад

@@ReneeRomeo thank you I'll probably just hide it like you said 👍

@ReneeRomeo Год назад

@Gabriella Pope I know, it seems such a shame. amAt least you'll be using it - that's what counts! ❤

@andrewbryngelson9439 2 года назад

Wait which one was better? I there were too many and I couldnt tell which one was the best. So just get gorilla glue? And what’s the other stuff? Do you do both for the best result?

@ReneeRomeo 2 года назад

Andrew, Gorilla glue only for the win! All the best. Renee!

@sharigirardeau3367 3 года назад

My canister has a big crack and is missing just granules of glass. It hasn't fallen apart but it will unless I can reinforce it. Can you tell me how to do that? TIA

@ReneeRomeo 3 года назад

Hi Shari, I think this might be a tough fix. You can try to tape the areas of missing glass with clear scotch tape on the outside, then try to fill them with the Gorilla glue from the inside. It may not work if you have missing pieces and/or the tape can get stuck, I imagine it's better than throwing the canister away though. I hope this helps! All the best, Renee

@sharigirardeau3367 3 года назад

@@ReneeRomeo I'm not missing anything, yet, lol. That's the only reason I thought it had a chance! 😄 I'll mod podge the inside with fabric or something, then paint the outside. No one has to know the funky thing holds sentimental value even though it's fundamentally changed! 😘

@ReneeRomeo 3 года назад

@@sharigirardeau3367 Even better idea!! It'll look cute.

@kalpanakarthikeyan8585 2 года назад

Which glue is suitable for broken or cracker bureau glass

@ReneeRomeo 2 года назад

Hi Kalpana, I thought the Gorilla Glue worked best. I hope you have great results too, Renee

@carmensloh9825 2 года назад

I cracked my cylindrical lamp shade. It was a slight hairline crack but over time, the heat from the light bulb and the weight of the lamp shade caused the crack to be extensive. I have since taken it down. The glass is still in one piece. It is just hairline cracks. Is it possible to repair the cracks by seeping in some resin, gorilla glue, etc without actually breaking apart the pieces?

@ReneeRomeo 2 года назад

Carmens Loh. I really think it's worth a try. If you use Gorilla glue and there's enough space for it to seep in, let it dry and then scrape of the excess with a razor blade. I hope this works for your situation. I would hate to tell you to separate the glass because it could shatter in the process. All the best, Renee

@carmensloh9825 2 года назад

@@ReneeRomeo thank you for your reply. Because the cracks runs through holes that hold up the lamp shade, do you think I should try to hang it just slightly off the floor to test? And should I change to LED light bulb which generates no heat to melt the glue?

@ReneeRomeo 2 года назад

@@carmensloh9825 You may need the strength of the floor to keep things together while you're gluing and scraping. I don't think that LED or incandescent will affect the the glue either. Keep whatever type bulb you like. Please let me know how it goes. Renee

@carmensloh9825 2 года назад

@@ReneeRomeo @Renee Romeo I am afraid that if the glue doesnt work, the lamp shade would one day drop onto my glass dining table. On another note, I found that there are different types of Gorilla glue. Which should I buy? I suppose I need I something "watery" enough that can seep into the hairline cracks.

@ReneeRomeo 2 года назад

@@carmensloh9825 Yes - get the clear gorilla glue for glass. It's made to dry crystal clear.

@heliaazari4313 3 года назад

Is it safe to glue a cracked mirror too?

@ReneeRomeo 3 года назад

Helia, Yes, it's safe but there may be an issue with the reflective paper backing that is adhered to the back of the glass. If yours is in tact and not peeling away, I would go for it! All the best with your repair, Renee

@frostflower5555 2 года назад

Is there any way to add some of that dark stuff that's under the mirror? Like a paint of some sort?

@janestewart3231 Год назад

@@frostflower5555 use silver mirror spray to spray (multiple coats) on the back of the mirror. I mirrored tinted glass doors with this, but have not applied it on a repaired mirror.

@yvonneschimmel453 3 года назад

You could have used gloves to prevent the oil in your hands to reach the glass. The oil in your skin can affect the performance of the glue

@ReneeRomeo 3 года назад

Hi Yvonne, Excellent point! I did think of using gloves but was afraid I get stuck to the glass. Sometimes it's difficult for me to 'feel' surfaces with gloves on so I took my chances here. It turned out great but your point is also great for others. Thanks for the feedback, Renee

@yvonneschimmel453 3 года назад

@@ReneeRomeo is ok. I appreciate your video so much.

@melissamcbrayer9220 3 года назад

Can you send a message with links with the 2 products you use please?

@ReneeRomeo 3 года назад

HI Melissa, Absolutely! Here they are: Sorry for the long links! www.amazon.com/gp/product/B074J7XQZT/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B074J7XQZT&linkCode=as2&tag=reneeromeo0f-20&linkId=b3a67ce4ff41c9e73b131ecfa2fcddb0 AND... www.amazon.com/gp/product/B07G5BM2YT/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07G5BM2YT&linkCode=as2&tag=reneeromeo0f-20&linkId=3eacac3d283aaaeaecba62d37343e6a6 If these don't work (for some reason), you can find them in the text below the video on my website www.reneeromeo.com All the best, Renee

@littlemissspookyness4701 3 года назад

Can this be used to fix glass frames

@ReneeRomeo 3 года назад

Are you referring to a picture frame?

@littlemissspookyness4701 3 года назад

@@ReneeRomeo yes

@ReneeRomeo 3 года назад

@@littlemissspookyness4701 As long as the backside isn't mirrored, this will work for sure. Best wishes!

@littlemissspookyness4701 3 года назад

@@ReneeRomeo thank you

@ReneeRomeo 3 года назад

@@littlemissspookyness4701 Anytime!

@sachinmadaan7523 3 года назад

VIDEO QUALITY IS NOT CLEAR AT ALL ?

@ff3m1n4z1 2 года назад

My moms gonna be so mad at me if this dont work

@ReneeRomeo 2 года назад

KOOLKIDCHLOE, It'll work!! Best wishes, Renee

@HolahkuTaigiTWFormosanDiplomat 3 года назад

So I can save my phone?

@ReneeRomeo 3 года назад

Hello Haiangku, Many people have tried this method for saving their phones. It's worth a try before purchasing a new one. All the best, Renee

@kathleenreyes4345 Год назад

You never stated which was your preferred method. Guessing you chose the gorilla glue?

@ReneeRomeo Год назад

Gorilla Glue for the win!!

@rickcarter3183 4 года назад

Where’s your glove running fingers over broken glass crazy

@ReneeRomeo 4 года назад

Hi Rick, It must be all the callouses on my hands - lol. Yes, I should have worn gloves. Thanks for the heads-up! I don't want anyone getting injured. Renee

@rolandthethompsongunner64 2 года назад

Neither of those products really worked it was obvious. I have a customer with a 15k oak curio cabinet with two cracked pieces about 12 X 48 “ and getting them out would be as labor intensive as having them completely replaced. It’s to bad there isn’t enough of this type of work to make enough money at it. Not to mention if the glass is beveled, curved, tinted, or frosted it’s going to require exact measurements or an almost complete example to even attempt to replace.

@ReneeRomeo 2 года назад

Roland the Thompson gunner, Yes - unfortunately the glass needs to be removed in order to get proper adhesion and transparency. Making curved glass would be a good job to get into! Best wishes with this project, Renee