Repairing a BIG Mining Truck Cylinder Barrel | Part 1 | Machining & Welding

Подписаться 775 тыс.

Просмотров 1 млн

50% 1

We've got a cylinder barrel in to repair off a BIG Mining Haul truck! This is the hoist cylinder barrel off a Caterpillar 789 Mining haul truck and the inside has been damaged. In this part 1 video we show the step by step process of disassembling the damaged cylinder barrel and start machining up the new barrel. First is machining off the barrel end and head flange. We then start machining up the new cylinder barrel by turning down one end to fit the head flange. The head flange is then installed with an interference fit before dual shield welding the head flange onto the new barrel. Stay tuned for Part 2 where we finish machining, honing and welding the new barrel!
In this video we are using:
- Hafco TM-26120G Centre Lathe
- WIA 500i Weldmatic welder
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: bit.ly/ceesubscribe
Want Early Access & Ad Free videos?? Join our Patreon Community: / cuttingedgeengineering
Official CEE Merch shop: www.ceeshop.com.au
Check out our AMAZON store and explore our favourite finds that we use in the workshop:
www.amazon.com/shop/cuttinged...
To see more follow us on online here:
TikTok: vt.tiktok.com/ZSdHhtN4h/
Instagram / cutting_edge_engineering
Facebook / cuttingedgeengineering...
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
#australianmachinist #machineshop #machinist

Наука

Опубликовано:

24 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,7 тыс.

@CuttingEdgeEngineering 8 месяцев назад

Righto guys happy Friday! We hope you enjoy this video with plenty of machining and welding action, plus a side of cute birds and Homey Cam! 😁👍 Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly uploads. 👇 🤳 📲Follow us online here: linktr.ee/CEEAUS 🛍Official CEE Merch shop: www.ceeshop.com.au 🎉Get Early Access & Ad Free videos in our Patreon community: www.patreon.com/cuttingedgeengineering

@64Pete 8 месяцев назад

Have a bonza weekend guys!

@ypaulbrown 8 месяцев назад

Wishing the Whole Gang at CEE Australia a wonderful Friday night and Weekend..... As always, we love every thing you do and the information you let us in on..... Karen, Kurtis and of course Homeless, you are a Fantastic Team....... Best Wishes from the other 'Sunshine State' Paul Brown

@Kardall 8 месяцев назад

Man. It's 1am on Friday here :( And now I have to stay up for 37min to watch an awesome video........ :D :D :D :D

@ramaswamykarthik3406 8 месяцев назад

Hi I am from India,,the sequence of your working procedures is absolutely correct and with good techniques ,,,I suggest you ,,,and if possible ,,painting work is done means after the completion in every process ,,videos looks too good with FIVE STARS BRO....🌟👍👍👍👍👍👍 ....

@RCake 8 месяцев назад

What an absolutely beautiful b-roll this week, you have outdone yourselves 😂 🐦‍⬛

@utha2665 8 месяцев назад

Kurtis, the bird whisperer and master machinist. You two make a great team.

@DogSerious 8 месяцев назад

My bird doesn't even talk to me as much as CEE's resident flying poop machines!

@pattygman4675 8 месяцев назад

@@DogSerious Would hate to think if it was was a lyre bird, omg the things that bird would be chirping 😂😂😂😂

@haydenc2742 8 месяцев назад

You beat me to it ;)

@duggaboy 8 месяцев назад

30:42 ...and magician

@ChrisC-oy9qp 8 месяцев назад

Like Ace Ventura when he gets home... Aaaaaaaaaaaaahhhhhhh 🐦🕊️🐦🕊️🐦🕊️

@MrDhandley 8 месяцев назад

Australia is very proud of you both.

@CuttingEdgeEngineering 8 месяцев назад

cheers mate!!

@brettymike 8 месяцев назад

I would be a very happy customer too, knowing repairs are in the best hands in Oz!

@michaelrice500 8 месяцев назад

Alaska also!

@warpo007 8 месяцев назад

3 of them! don't forget Homeless!

@frankkolmann4801 8 месяцев назад

What I love best is the outtake where you show where you dump the old cylinder into the trash bin. This is not a repair. It is a rebuild.

@jamesmaida47 8 месяцев назад

Dude, watching that head flange drop on all smooth and those two edges match up spot on was so insanely satisfying. Great work as always!

@JohnH20111 7 месяцев назад

you ain’t lying, because i was thinking the exact same thing

@tototere 8 месяцев назад

Great combination of diagnostics, order of process, machining and welding, all with top notch camera work. Splice with dog, birds, out-takes and Karen's laughter: winning combo.

@tantamounted 8 месяцев назад

Because the barrel is ruined to the point that re-honing would thin the walls too much, but the ends are still useable, and that much professionally shaped metal is expensive.@@karlwithak.

@talljake 8 месяцев назад

Thanks for the little context video of where the cylinder sits, it really helps!

@erroos 8 месяцев назад

For fugg sake dude, I’ve never thought one man can handle so big parts repairs. It’s so interesting to watch!

@keithstevenson2369 8 месяцев назад

He like the Bob Ross of machining. Sometimes i fall asleep listening to these videos.

@user-zl3wl9rs6s 8 месяцев назад

Sitting here in Texas, America at 2:10 a.m. wondering when the C.E.E. Professional Machinist is gonna release another video, well, look no further, here it is!👍👍

@mateusznowicki9638 8 месяцев назад

That's my first CEE video that's I was waiting for! Because I've just discovered the channel earlier this week. Been binge watching since then xd

@misenplace8442 8 месяцев назад

You won't be disappointed 👍

@CuttingEdgeEngineering 8 месяцев назад

hey mate thanks for waiting & watching! We hope you enjoy our new video. Cheers 👍

@mateusznowicki9638 8 месяцев назад

@@misenplace8442 dude, I know that. My head blew up when I watched q&a and found out that Curtis and Karen are the only two people working there. Dude is unbelievable and Karen has great skills as well;) and Homie ❤️

@greggdsciotto8952 8 месяцев назад

Amazing how the lift straps are able to jump onto the forklift forks by themselves. 😉

@joelbrown3479 8 месяцев назад

Love the SLO-MO CHIP CAM, WONDERFUL CAMERA & EDITING 👍

@helplmchoking 8 месяцев назад

you know it's been a busy week when the video goes out and I'm thinking "huh, pretty sure it was friday like 2 days ago...". Good shit as always guys!

@danielcarter305 8 месяцев назад

I love the Homie cam! You could start a whole channel on that alone! Homie 24/7, all homie, all the time!😂😂😂😂😂😂😂😂😂

@CuttingEdgeEngineering 8 месяцев назад

The poor Go Pro wouldn't be able to handle it 😅

@danielcarter305 8 месяцев назад

Yeah, and if he ever got the Gopro off of himself, he would probably eat it. Or leave it in little bits! 😂😂😂😂😂😂

@user-fk2wm7iu5g 8 месяцев назад

Australia is very proud of you both.. Australia is very proud of you both..

@OwenFromOhio 8 месяцев назад

I always enjoy these videos, you made an old man's day!!

@Mues_Lee 8 месяцев назад

Good morning Karen! Good morning safety officer! Good morning disney princess! 😀😀😀😀 (a very talented princess)

@Combat.Wombat.official 8 месяцев назад

the best thing about not being at work is watching someone else work. Makes me feel like I'm sitting down more than just normal sitting down

@MadMathMike 8 месяцев назад

That barrel looks so small on the dump truck, but it's so big up close! Crazy!

@mikedmt 8 месяцев назад

That fit up of the interference for the head flange was awesome

@ringo8875 8 месяцев назад

Greetings from Germany 🇩🇪 !

@helmutsch3114 8 месяцев назад

Von mir auch!

@jensstroh6907 8 месяцев назад

Hier auch☺️

@MyLittleWorkshop631 8 месяцев назад

Auch von mir

@daleburrell6273 8 месяцев назад

...that's nice...

@TKM1951 8 месяцев назад

And Canada

@barillius 8 месяцев назад

Kurtis/Karen.... I don't know if you all are tracking your metrics... but you released this video less than 18 minutes ago and you've already acquired 6k views and just under 80 comments. These are signs that you're on the right track. Congratulations on being the absolute legends that you truly are... from here on the West Coast of the US at midnight. Yes, we stay up just to see what you folks are releasing next. Well done.

@CuttingEdgeEngineering 8 месяцев назад

Hey thanks for watching, I like to keep an eye on the metrics/analytics to see where things can be improved. We have so much appreciation and gratitude for our community and viewers, wouldn't be here without you all! 🥰 Karen

@TheInvoice123 8 месяцев назад

And Kurtis would be a slightly lesser RU-vid Star without fantastic content from Kiwi Karen the enforcer

@LadyAnuB 8 месяцев назад

Considering I used to start work @ 11 pm, staying up to midnight is fine for me and I can walk my dog before or after a CEE video

@p-niel5328 8 месяцев назад

Not Just the US but the Philippines too.

@evandrolangaro1983 8 месяцев назад

Not just the Philippines, but the Brasil 😉

@stevebelser4698 8 месяцев назад

Karen's camera work really is amazing

@CuttingEdgeEngineering 8 месяцев назад

Thank you 🥰

@timtom7097 8 месяцев назад

Your dog seems so well behaved and fun. Good job training him. He is a ball of chaotic good.

@johannesfiftyeight9287 8 месяцев назад

Friday! Tomorrow is moving day... got to see my CEE video before packing up my PC! Nice work with the Homey cam! Feeding the birds was cool too! No beers for me tonight! 🍺 Have to wait till tomorrow night after all is moved. 🍺🍺 Have a great weekend!

@CuttingEdgeEngineering 8 месяцев назад

hey mate hope the move is stress free for you!

@floundergearjam 8 месяцев назад

Love it when you guys install the "Homie Cam". The close-up makes Homeless sound like the Tasmanian Devil (from Looney Tunes). Another great vid Kurtis and Karen. Thanks.

@user-wq4fp4ly5j 8 месяцев назад

Eagerly awaiting part 2.

@horationelson2153 8 месяцев назад

Homey-Cam never gets old.😃

@onemoredeadman 8 месяцев назад

Imagine how much work Kurtis could get done if he didn't keep flubbing his lines or playing with the animals

@bigwoodrz 8 месяцев назад

As usual my Friday fix from CEE. Now I can wear my CEE Bucket Hat with pride over the promising weekend weather here in Melbourne.

@CuttingEdgeEngineering 8 месяцев назад

hey mate thanks so much for your support!

@charliejacobs8762 8 месяцев назад

Hello, Kurtis, Karen and Homeless, my wife watches the videos too and she said you had a new lathe. I looked and told her nope same one you had. As we watched I commented on how the ends had to be removed she said it was easy with good equipment. I told her no, craftsmanship was the key. A good man or woman knowledgeable with marginal tools is still better than a jury rigger with the best tools.

@brianelliot2719 8 месяцев назад

Thanks Karen and Kurtis. Excellent videography as always, Karen 😊

@davidlasoff8261 8 месяцев назад

Damn, he's so good! When Kurtiss slipped that heated head on the end of the cylinder with a perfect fit, I went "wow!" Great video, Karen!

@gazzafloss 8 месяцев назад

Kurtis, you are an incredibly good bird trainer. If you can teach them to machine and weld, (might give a whole new meaning to the term "bird shit" welding), Homey can check the work quality and job safety. Karen and yourself can retire to a life of leisure. Great stuff mate, look forward to part 2.

@j81851 8 месяцев назад

Talk about a 5 star comment there ya go we got one....🤣

@thisisbeyondajoke6748 8 месяцев назад

Pinned comment 😂

@TrailRat2000 8 месяцев назад

Disney Princess Engineering...

@sambuggins8887 8 месяцев назад

Kurtis, you look mighty tired brother!! Take it easy and try to take a day off soon 😂 i would be lost without you three every Friday ❤

@rajeshrajan6200 8 месяцев назад

After watching the hard work that goes into creating and maintaining machines like this, I understand why my old man always said that the stock market is the closest man has gotten yet to alchemy. Creating stupendous amounts of money out of thin air. Humanity always wanted it easy

@edwardratcliffe9177 8 месяцев назад

Hahaha. This is my favorite comment!

@user-zg3rg3ng2k 8 месяцев назад

Not so fast. I have done my fair bit of prospecting in there. Lost over $30,000. I can conclusively say that it didn’t PAN OUT well for me :)

@vipushiya7594 8 месяцев назад

Lol. Tell that to the Warren Buffet’s and Charlie Munger’s. Actually some others are good. Cathy Wood predicted a rise in oil prices due to the Ukraine situation. My own adviser Mary Elizabeth Huxley also predicted that precious metals will go up during a recession after the pandemic. My portfolio has grown over $400,000 in 8 months so I guess some are better at prospecting stocks than others

@user-zg3rg3ng2k 8 месяцев назад

Sounds great. I can’t get into Warren’s por,tfolio anyway to see how he does it. Does she attend to individual clients or is she institutional

@vipushiya7594 8 месяцев назад

She’s as personal as it can get. Worked in Merrill Lynch and manages private por,tfolios. She’s the best bet if you are looking for something personal. I can't drop her number here but she has a public cntact website where you can reach her

@danielcarter305 8 месяцев назад

I never knew that these cylinder were made in pieces. I thought they were cast in one whole piece!

@CuttingEdgeEngineering 8 месяцев назад

The head flange and barrel is machined out of 1 piece and then the eye is welded on

@aserta 8 месяцев назад

They have to be. If they were cast in one piece, a machine such as that (the dump truck) wouldn't cost ~3mill, but 5 or more. Gotta save costs where you can with these because otherwise, nobody would buy them. There's also benefits in the strength of the finite item, giving each component the best metal to exist with. Kinda like car rear axles. They're also made from cast components and either extruded (commonly known as non-seam tubing) or welded tubes. There's also the considerations of the manufacturer's cost for casting a component as large, in the required quantities to sustain the industry. They'd have to cast 20 of these every few weeks (if not more) to have enough to pass around the globe... they'd be throwing money out of the house. There's many, many reasons behind it. :)

@carenbarnet378 8 месяцев назад

I find it absolutely incredible that only 2 of those hydraulic rams lift the tipper and the load.

@j81851 8 месяцев назад

@@carenbarnet378 Excellent observation you set me thinking more about it myself. That must be some kind of flow and pressure and make a mess if a line breaks!!

@scrapbudgetgarage4404 8 месяцев назад

@@j81851my dad was walking near a smaller excavator when a line popped, it covered everything in about a 30 foot radius with a good layer of hydraulic oil, I can't imagine the mess a line feeding this big of a cylinder would make

@listerd93 8 месяцев назад

Looking forward to the honing steps!

@justdoit4170 8 месяцев назад

Yes, but will it be the Sunnen or Delapena Vertical ? Please let it be the Delapena !🤞

@MsRocketRoy 5 месяцев назад

My favourite channel. So relaxing to watch a craftsman at work.

@xoxo2008oxox 8 месяцев назад

I love how Karen incorporates the vehicles/machinery these repairs are from/for. Great editing/camera work along with your machining skillset is a win!

@stevepiechock9234 8 месяцев назад

This is another sample of outstanding problem solving and videography. I am continually impressed with your examination and planning to resolve repair issues. I especially enjoy the videography closeups and slow motion imaging of the work in progress. As long as I can receive your channel video, I will be there watching. Your ID of Cutting Edge Engineering is precisely what your do.

@CuttingEdgeEngineering 8 месяцев назад

hey mate thanks for taking time to share such a positive comment we really appreciate that

@stevepiechock9234 8 месяцев назад

You are quite welcome. I really like your channel!

@cyberhornthedragon 8 месяцев назад

i think this is the first time ive ever seen a cradle used to ship n hold one of these cylinders, YAY homie cam an squeak squeaks! kurtis the new disney icon HAHAHAHA

@pauld382 8 месяцев назад

Homie Camera activated! AWESOME!

@nv1493 8 месяцев назад

HomelessCam is outstanding! Well done!

@harmlesscreationsofthegree1248 8 месяцев назад

The satisfying barrel roll off the fork tines made my week. You three are awesome 😎

@user-mr8yg5pl8d 8 месяцев назад

Все ваши видео очень нравятся! У вас хороший канал и самое главное очень полезный! Спасибо вам за вашу работу и отдельное спасибо Карен за съëмку,очень хорошая операторская работа! Привет из России.

@joseluisvaiksnoras7857 8 месяцев назад

It's great to see Homey's point of view.

@thomashaley7657 8 месяцев назад

Now we can watch Homie-Cam. Good Shit! Great videos guys and girls! Thomas, Mississippi, USA!!!

@DonLuc23 8 месяцев назад

Love the slomo, looks so cool watching the chips build up then fall.

@gazzafloss 8 месяцев назад

Rather satisfying, I agree.

@papatomicjusz 8 месяцев назад

I love Fridays. Home office, I turn on YT, drink my morning tea and watch another great Homey video from Karen. The guy in background does a good job too.

@mjkaelbling 8 месяцев назад

That's Karl

@nathanjames4242 8 месяцев назад

Guys. Honestly, this might be the best video you have ever made.

@thomasgates7852 8 месяцев назад

Loved how smoothly the head flange fit on after heating it up

@peterbuysen8172 8 месяцев назад

Kurtis the mentors in your career would be proud of what skills you show to the world. Karen your video skills are to be admired and the addition of video info is cool as it is on point 👌👍

@brettymike 8 месяцев назад

I reckon Kurtis is mostly self taught.

@michaelrice500 8 месяцев назад

Here, hear! 🤘

@jaspercooper7298 8 месяцев назад

Hi Kurtis, my dad and I watch your guys videos on Friday nights when I go there for dinner. He is an architect and I am a builder. We're both continuely amazed that this field of work exists and the massive sizes of material you work with. We both are really intrigued to know your background and how you have worked your way to now, with the vast knowledge you possess! And clearly the skill to produce such high quality workmanship

@CuttingEdgeEngineering 8 месяцев назад

Hey mate & dad! Glad you both enjoy watching the videos. You might like to check out 'Our first Q&A' video I share a bit about my background and starting the business. 😎👍

@DRV-mt5dd 8 месяцев назад

Same here; how does a fairly young guy know how to seemingly so confidently tackle all these things, and do them so well. Very impressive.

@bdove7939 8 месяцев назад

CEE is the GOLD Standard for you tube machining channels. I learn something every video. Great video. As usual. Thank you.

@JohnH20111 7 месяцев назад

i would have to say that CEE is the Platinum standard

@zaineridling 8 месяцев назад

Appreciate the annotated, in-video explanations, along Safety Officer breaks. So relaxing to watch after a stressful, hot day at work. No annoyances on this channel. You show the work, the process. Hope you realize how unique you two are!

@CuttingEdgeEngineering 8 месяцев назад

Thank you for the great comment!

@frederiquerijsdijk 7 месяцев назад

@@CuttingEdgeEngineeringtrue for sure! You guys are on the same level as Primitive Technology. Even though this his filled with commentary, but it's all so very honest and intrinsic.

@Spork00 8 месяцев назад

Hooray, more Friday beer o'clock entertainment

@artszabo1015 8 месяцев назад

I have been running lathes off and on since 1964 and I can certainly say that the lathe in this video is the crown jewel of all of them. And you Sir, set the standard for all YT machinists. This is not flattery, it is an educated observation from an old man that is a prick. Art from Ohio

@briceman7377 8 месяцев назад

Homeless is such a cool dog! Lucky parents!!

@wheelitzr2 8 месяцев назад

You should really sign up for patrion, I not only got to watch this video on Wednesday but it was also 5 minuts longer with all of the extra stuff in it! Thank you guys for sharing all of your hard work!

@dennisc3238 8 месяцев назад

Great video, and as always, the "go pro pooch" doesn't disappoint! He must give those cameras a real workout. Careful with George and his buddies as birds do essentially two things in life: eat and poop, everywhere.! I like how the outtakes show you guys laughing at mistakes and frustrations. Keep it up!

@kylecarmichael5890 8 месяцев назад

Just tossing this out there...if it doesn't rust almost immediately or if you can treat it so it doesn't, adding a bag of swarf to you store is an idea. And I LOVE Hommie cam!

@toomanyhobbies2011 8 месяцев назад

The Dogcam works surprizingly well!

@seanemmett3419 8 месяцев назад

The clock is an awesome idea to show the time you take to do these jobs.

@QbutNotTheQ 8 месяцев назад

The cylinder is so big it comes with its own shipping pallet thing.

@ketocajun7451 8 месяцев назад

Part 2? Dam, I was waiting for the finish product. You feed him and he will always be around!

@Guildmarm 8 месяцев назад

omg when that head flange went on. UNF!!! So flush!!! That's the shit I'm here for, man! lol

@danielstojanski3278 8 месяцев назад

Dziękuję że dzielisz się swoją wiedzą i doświadczeniem. You are a very smart and clever guy. Applause for a well-edited video

@CuttingEdgeEngineering 7 месяцев назад

Hey mate, thank you so much for your support! We appreciate it! Cheers, Kurtis, Karen & Homey👌

@warrior4christ777 8 месяцев назад

The confidence in your ability you must have to be able to cut a piece of equipment up like that is inspiring

@TheBonnetq 8 месяцев назад

Curtis, your a master, but your producer/editor/camera lass is pretty darn good too

@IceBerg2k 8 месяцев назад

Those birds recognize good people, that's for sure.

@KibblesNbytes 8 месяцев назад

I work in a factory in the US that makes those exact same cylinders, I just started watching your vids about a week ago, wild to see one in your shop. It's really amazing to see 1 man doing the whole process - subbing for part 2

@Tonzeff 8 месяцев назад

Every day there's a new CEE video is a good day 🙂

@AnterianEvo 7 месяцев назад

the camera on Homeless is a must now, we've grown so attached to him over the years!

@CaptainBill22 8 месяцев назад

Kurtis, you're welds are like butter! Just so perfectly even and smooth.

@JSambrook 8 месяцев назад

As always, a great video! Aside from the excellence in machining and welding, the best is in the out-takes, with Kurtis the Disney Princess communing with his flock! 😀

@jeremygoodman8587 8 месяцев назад

This channel was one of the inspirations to get me into welding and maching school.

@CuttingEdgeEngineering 8 месяцев назад

Hey mate that's really awesome, all the best with your journey!

@alwayssearching1882 8 месяцев назад

Had I known about this career opportunity when I was younger I would have definitely pursued it. What a rewarding job.

@hoofhearted1902 8 месяцев назад

When everyone is waiting for the smoke on the weld joint!! Keep up the great work and content! Cheers from Texas!

@larry3064 8 месяцев назад

Another great video. I had been wondering about the overhead crane and thinking about how smooth it seems to work. Thanks for the shot of it in the video. Have a safe and wonderful week

@berndheiden7630 8 месяцев назад

They say that we are part of a computer simulation. After the last video I thought wouldn‘t it be nice if Kurtis would show the crane and the extend of the reach that seems to span the whole shop area. And here it comes? And I just thought it, didn‘t even speak it out loud for Siri to hear! If I have any other questions I‘ll just think of them harder in the future. Thanks for the immediate reaction.

@dominicvallez6176 8 месяцев назад

Seriously, this is the only channel I subscribe to and look forward to seeing on a weekly basis. I even rewatch videos! LOL… I appreciate the content, quality, commentary, and professionalism of the videos! Cheers from America!!!

@CuttingEdgeEngineering 8 месяцев назад

hey mate thanks very much for subscribing and supporting, glad you enjoy the vids

@insertgoodname4809 8 месяцев назад

Me too. The only channel I watch religiously when a new vid drops!

@jimpumphrey7713 8 месяцев назад

Amazing how you tame those birds. Nice work on the barrel. You make it look so easy. And we can't forget the camera lady. Nice job Karen!

@willclark491 8 месяцев назад

Homey is the best part of my CEE day. Thanks Curtis!

@dalejones3862 8 месяцев назад

Another great video as always from kurtis with amazing editing from Karen as ever

@aaronpreston47 8 месяцев назад

As soon as you said it was an un-honed barrel I got excited, I love watching the honing process. Will have to wait till next week though.

@aubreyharry7923 8 месяцев назад

I really enjoyed the clock during the welding! It was great to see the time pass during the parts that were fast forwarded

@sofiebribiesca6678 8 месяцев назад

Cheers Karen and Kurtis. Hope homey has had a great birthday week. A dog at our house this week just lost her squeaky chicken in the bush, so methinks a visit to get a few more and I'm going to send one homey's way for a belated birthday present. Yous are a great team. Hope you have a lovely weekend.

@LordDustinDeWynd 8 месяцев назад

Howdy from Tanglefoot, Texas, USA! Sposta hit 107°F, 41.6°C, here again today! How's y'all?

@CuttingEdgeEngineering 8 месяцев назад

wow that's pretty hot! We're doing good mate just busy, already counting down for the Christmas break 😂👍

@JoeyDadawg 8 месяцев назад

Can’t wait for the paint job

@dcm12388 8 месяцев назад

Love the clock. It's amazing how steady the camera is when the dog is running. Keep it up Clay in Dallas Texas

@baldyoldfart5828 8 месяцев назад

I'm glad I woke at silly oclock now... go at it young man!

@ianlulham 8 месяцев назад

George, Paul and Ringo....where's John? Great video as always, thanks for your efforts in producing such quality content, very enjoyable

@IJMey 8 месяцев назад

I have no training in your field of expertise, none at all. However, the way that you explain where the part fits, how it functions, what possibly caused the damage and the steps and procedures to repair enables me to follow with understanding. This is, ‘so good’.