Replace an ignition switch in a Chevy R30 dump truck. Squarebody 

Thanks. This is the ONLY video I have found that shows someone removing the actual ignition starter switch. Everyone else only shows removing the dumb key cylinder or just the wires and call the wires the ignition starter switch. My trucks been sitting for days cause I cant find that shoe box looking switch on my S10. But, this video gives me an idea of where to look. Thanks again.

Thanks bro. I wasted 2 hours trying to bend the metal rod to stick it in the hole but all I had to do is flip the switch over. Had I not saw this vid I’d be still sweating it out. Only video with thorough instructions.

thankyou dude your help me alot i change my switch it a couple days to get the part so i get it out to match it up i trying put back in but didnt fit till i so your vid had upside down lol tnanks again dude

i watched this before i changed mine, very helpful... i did however found more room to work by placing a board to hold in the clutch pedal...

I was looking for the way the switch is mounted and this video revealed that. Thumbs up!!

Thanks for the video. I used this when I changed out my ignition switch which I purchased from AutoZone for $21.99 (minus 10% Military discount). I was able to drop the steering column without having to loosen any bolts on the inside of the engine bay. Itwas a pain trying to get everything perfectly aligned and bolted back together. This fixed my no start issue which I originally blamed on the starter. I had replaced the started with a higher quality starter which starts the engine over much faster than previous starters.

Nicely done. Thx!

Thank you.. .appreciate your time and patience. Good video!

Great job, to the point, all the info I needed tyvm!

It's crazy, but I can Smell this video..... 😂😂

I totally agree with you brother!! Makes no sense to me as well. Why even place it on top of the column???

Gud job bro thanks!! Really appreciate it

Did you have to rotate the switch to hook up the rod ? did you have to remove a plastic button on switch to hook up rod ?

I think the dime you found just fell behind the dash and wasn't part of an attempt to fix anything. It's visible just resting on top of the steering column @ 4:56

How did you fix it? I can't find an answer.

Gotta love the tiny 5/16 and 10 mm bolts holding precision

Hey man i onow this video is old but what thread size were those bols for thr mouth on ignition

Good 👍 job What is the part number?

I ran into the same problem With My 86 Sliverardo

Hook the hot wire to the battery and a toggle switch it's just a dump truck

The white is over spray from dash paint

$13.50 for an ignition switch that's impressive compared to modern Chevys are like $80 to $100 and that's if the security system doesn't lock you out when you replace it

Is there a way to test the existing switch to know if that is what is Bad?

I dont know why that nut was so hard to get offf !!! 🤔🤔🤫🤫 hahahah

Indash ignition

All that and you could not show if that was the solution?