Replace BROKEN Tip on Ripper Shank for Caterpillar D11 Dozer | Welding Fabrication

Подписаться 770 тыс.

Просмотров 1,7 млн

50% 1

This video is a job we did to replace a broken tip on a ripper shank for a Caterpillar D11 Dozer. This dozer has been ripping up very hard quartz rock and as with any heavy earthmoving equipment it is common for the ripper tip to break. First we cut off the broken end of the ripper shank using our UniMig straight line gas cutter and also bevel cut to weld prep the shank. We then fit and align the new ripper end before lots of welding. After the welding is complete we cut the ripper to shape using our 9” inch angle grinder. A lot of grinding is needed for shaping the ripper end to suite the ripper boot before drilling and counter sinking holes for the locking pins using our huge radial arm drill.
In this video we are using:
- Metalmaster HPM-150T Hydraulic Press
- UniMig CG30 Straight Line gas cutting machine
- Makita 2400W 9” inch Angle Grinder
- WIA Weldmatic 500i Welder
- Hafco ZX3050X16 Radial Arm Drill
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: bit.ly/ceesubscribe
Join our Patreon community: / cuttingedgeengineering
To see more follow us on online here:
Instagram / cutting_edge_engineering
Facebook / cuttingedgeengineering...
Official CEE Merch shop: www.ceeshop.com.au
Check out our AMAZON store and explore our favourite finds that we use in the workshop:
www.amazon.com/shop/cuttinged...
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: www.epidemicsound.com/referra...
Song:
#australianmachinist #machineshop #machinist

Наука

Опубликовано:

26 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,2 тыс.

@CuttingEdgeEngineering 2 года назад

Hey viewers you might have seen this Ripper video a few months back, we had to take it down due to "extreme profanity" but made some changes and decided it was time to upload it again! How many welding layers do you think were used? 😎👍 Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly uploads. 👇 🤳 Follow us online here: Instagram instagram.com/cutting_edge_engineering Facebook facebook.com/cuttingedgeengineeringaustralia/ Official CEE Merch shop: www.ceeshop.com.au

@BrokenLifeCycle 2 года назад

Extreme profanity? Was that out of complaints by sensitive butthurt viewers or personal choice?

@humancattoy7767 2 года назад

I couldn't give an actual number of passes. So could I just say a shitload of weld?

@MJ-vv2fr 2 года назад

The profanity was not a problem. It’s reality. The bloopers are the best part, please don’t remove them. On occasion I have skipped the video to see the bloopers. You do great work and make videos that are interesting to watch. It’s not easy to do both. As a person skilled in my trade I often say, it’s not a matter of how much you know, or how perfect you are, it’s your ability to adapt and recover when things don’t go to plan that make a person truly good at their job. You obviously leave a significant amount out of the videos that won’t be interesting to most, but I know exactly how much work and stress goes into these jobs. And I cannot properly describe how psychopathic my wolf/husky dog is, but I feel like you might understand having seen your shop dog. Keep making great videos, average people enjoy them, even if advertisers don’t.

@geoffbrumpton8544 2 года назад

No wonder you need a break editing with Commentary 🤣🤣🤣🤣 you should do a voice over sometimes Karen.

@thomas316 2 года назад

"Extreme profanity" get stuffed RU-vid. 😂 It's traditional Australian vernacular, swearing is a form of positive affirmation in Australia: "Bloody oath! Daz is a good cunt to work with, doesn't fuck about." 🇦🇺

@longlowdog 2 года назад

I've been a trawlerman, a forester and a farmer and swearing is the only way to let stress out without breaking something or hitting something immovable. You're both doing great and unless swearing wrecks RU-vid's algorithm then don't change a thing. The biggest attraction of this channel is how natural you both are, closely followed by an admiration of your respective skillsets and dedication to great work and vid's. Regards from Scotland.

@spangy8405 2 года назад

longlowdog has nailed it. Well said m8.

@josemanon6295 2 года назад

Right! Also Cioran said that a man who doesn't swear can go crazy... ;)

@tylerhensley2312 2 года назад

Couldn't agree more!

@connahjones8178 2 года назад

As a fellow brit, a scotsmans vocabulary would not be complete without the f word!

@robertmanley7556 2 года назад

I create new cuss words daily it is part of the working culture !!

@marko4496 2 года назад

The bloopers and the swears at the end are funny as. Everyone puts out vanilla vids - love that you aren't like everyone else.

@skylerlewis2422 2 года назад

@@user-gd7jv9ux4m Nooo

@InservioLetum 2 года назад

I agree. The inclusion of a blooper reel is wonderfully down to earth and honestly I just love watching them interact. Steele's enthusiasm is awesome, but this no-nonsense, no-apprentice, understated and salt of the earth approach is refreshing and inspiring.

@RealNickTheCoolest 2 года назад

So many great channels have been killed because of RU-vid’s profanity censorship. As they would say in France, “You guys are a bunch of fucking cunts”, or something like that.

@michaeltarasenkoop2389 11 месяцев назад

Why not make a new one out of one piece of metal the same tHickness as the original no welding

@Yahudikiwi 2 года назад

I cannot get enough of these extraordinary displays of engineering genius. No wonder the big operators send their toughest jobs for you to sort out. You’re the best I have ever seen. You know how to rebuild anything the correct way and you don’t cut corners. I’m glad I found your channel 👍

@taitorhead4168 2 года назад

I welded bridge girders, worked with steel this thick, and played with heavy drills for years. Your videos bring back good (and really bad) memories. Thanks!!

@smokecreekstudio7320 Год назад

hard but its great proud work that when you finish the day you feel like you did something that matters.

@MichaelKingsfordGray Год назад

Yet another liar! You lie about your name!

@taitorhead4168 Год назад

@@MichaelKingsfordGray Who or what are you talking about?

@MichaelKingsfordGray Год назад

@@taitorhead4168 YOU! You lie about your real name. That make you a cowardly infant, who needs to grow up.

@taitorhead4168 Год назад

@@MichaelKingsfordGray When has anybody told you my real name? I am confused and I believe you are as well.

@brycejeannotte7699 2 года назад

Loved your use of CAD (Cardboard Aided Design) to shape the end of the ripper.

@TheducksOrg 2 года назад

great material choice too ;)

@ianpendlebury3704 2 года назад

24 - 25 mins : some real wizardry shaping the tip with the cutting discs. You have enviable hand eye coordination. Excellent video work too...

@santeebandit3246 2 года назад

Yeah no kidding. That was impressive.

@SexyThyme 11 месяцев назад

@@santeebandit3246 agreed. And what are ya gonna do? Mill it? Guess you have to get excellent at free hand angle grinding. Masterful indeed.

@aaronm446 9 месяцев назад

These repair videos are some of the most satisfying things I watch. Also, "right oh" and "how you going," are becoming some of my favorite hobby work phrases. Hopefully you never stop making these, it hits all the right spots in the brain.

@stephen2053 2 года назад

I only just found you guys, nothing like this on RU-vid, totally amazing!! what a team you both make, editing videos and the filming must take aslong as the job itself, well done to you both 👏

@CuttingEdgeEngineering 2 года назад

welcome to the channel!

@Uli_Krosse 2 года назад

This has become a ritual for me on Fridays. No matter how bad the day is, I will make time for the new CEE video - it does make the day better after all. Cheers for making these, stay like you are!

@jlelelr 2 года назад

does he own the entire shop and do all the work alone? i'm new to this channel.

@Uli_Krosse 2 года назад

@@jlelelr In short: Yes, it's Karen and him. They have a Q&A video which is worth watching - they also tell a bit of their journey in it.

@jlelelr 2 года назад

@@Uli_Krosse thanks... what a guy. awesome!

@hananc 2 года назад

Just for fun and addition to the viewing pleasure, I suggest getting a FLIR temp camera to show how and where the metals are getting hot.

@blermule8692 2 года назад

I (54) love your channel Kurtis! Since I'm an industrial mechanic myself, I know something about what you're doing there. I have been making gears for large gearboxes for almost thirty years! I think it's really great that you still show the outtakes at the end of the video! This shows again and again that we are only human. Greetings from Bocholt Germany.

@odoull69 2 года назад

Kurtis, I have no idea how many hours it's taken you to get great at what you do, but you are an inspiration. Pure magic watching you work!

@sniperfi4532 2 года назад

One of the things I’ve noticed and love is the fact you zoom in on the dials and settings of the machinery to help us understand a bit more. Goes over my head half the time but I enjoy it none the less!

@Pugjamin 2 года назад

Genuinely spat my drink out when he “pull started” the 9” 😂

@williamkerr3350 9 дней назад

I've teared up ,been watching for 7 years, sensational crew , sensational channel thank you.

@SloppyMechanics 2 года назад

6:21 i cant fucking BELIEVE how clean that oxy cut is, hooooollllyyyyshittttttt

@Adamz678 2 года назад

@NO NAME Even hand cuts can look really good if your expirienced and have a backing guide.

@samuelanketell8190 2 года назад

🤣🤣🤣🤣🤣swear bear 🤣🤣🤣🤣🤣

@edwinrideout514 2 года назад

It's refreshing to listen to someone work complete with swearing, laughing and poking fun like it used to be. Carry on Curtis Fucking wicked

@ypaulbrown 2 года назад

Glad to see the rerun.....will not be the same without Kurtis spicing it up a little with his descriptions.....cheers from Florida, Paul

@sercanemreegemen6659 2 года назад

I am a private security guard. I have nothing to do with what you do. But I am a person who is interested in every subject that develops himself. your videos take the stress out of my job, it's psychological therapy for me. Lots of love and respect from Turkey. Good luck with...

@garybarton8897 Год назад

Being a retired welder/machinist/boiler maker/fabrication specialist I really enjoy your videos. Keep it up, good job. Enjoy the bloopers at the end also.

@glennfryer1539 2 года назад

Love the Bloopers.. love the expressions on Kurtis’s face .. We often have a saying here in the U.K… “All the gear and no idea” but in your case .. “All the gear and all the idea”.. great shot Mrs Kurtis of the rebating tool in slow motion cutting the steel, brilliant repair, still amazes me how thick you can flame cut through thick steel..

@Batti2323 2 года назад

Love that phrase, Glenn!

@carljansevanrensburg2440 2 года назад

I've honestly never seen anyone welding as well as you. That's god-level welding in its purest form. Love your channel and thoroughly enjoy the bloopers and foreign language at the end.

@CuttingEdgeEngineering 2 года назад

Thanks mate 😎👊💥

@pilgrimm23 2 года назад

He's right ya know

@aspees 2 года назад

Kurtis is speaking Australianese. It's a derivative of the Queen's English. Slang, profanity, the consistent shortening of words, ending random words with "o" or "ie" , and inexplicable phrases make up the majority of this language. The Prime Minister's are known to speak full Aussie in order to communicate fluently with the citizen's of our great Nation.

@gib666 2 года назад

@Craftsman PK Go away

@gib666 2 года назад

@Craftsman PK Bye

@erneststevenson3872 Год назад

I must also say a word about the excellent photography. The angles and close-ups are always spot on. Good on her!

@mikes2294 2 года назад

Man, you have some nice toys. Love that torch setup. You amaze me at what you can do in that shop. The camera work is incredible. Best shop channel on the net. Florida USA👍👍👍👍👍

@CuttingEdgeEngineering 2 года назад

Wow, thanks!

@BlueEternities 2 года назад

The amount of force involved there is incredible. Love seeing these massive pieces of equipment getting worked on! Thanks for bringing us along!

@gregedmand9939 8 месяцев назад

What did Kurtis say about the horsepower of this dozer... Let's say 800 to the tracks? Can you picture a team of 800 draft horses all harnessed to a "plow" this size to open up the rocky ground of a quarry site? The amount of sheer power being transmitted through this chunk of steel into the job, nearly boggles the mind! One day, off the tip snaps. Then one very skilled boffin in Oz says: "Bring it here mate. I'll set it right." A day later it's back on the job getting dragged through stoney earth by those 800 ponies...good for another 5 years or more.

@ibTeeMac 2 года назад

Karen's favourite machine. The press. Said no one ever. Always amazed at the straight smooth line that can be cut through such thick metal. Always looking forward to Kurtis vs clingwrap videos. Maybe next time. Thnx for another great video

@ypaulbrown 2 года назад

what is amazing is how straight and how fast....I am thinking 8 to 11 inches [200mm to 275mm] per minute on 4" or 100mm plate....

@seanlee7354 Год назад

Who needs ta swear! Just watchin' sparks and metal chips fly is enough ta bust any stress!!! Great stuff dude!!! Thanks!!!

@robertnorris1808 Год назад

You are one talented person and watching you do all this work alone is amazing. Your welding is beyond belief and you make it look so easy. Great job to you and a great video to your better half. Love your dog and he looks so happy with the two of you. Glad he got a home with people that love him.

@elitearbor 2 года назад

I appreciate that regular bottle jack in place of a machinist's jack. That's how you know you're doing big-boy work.

@matt150269 2 года назад

Enjoy your break Karen 👍. 🇬🇧🇦🇺

@Alltakenbla 2 года назад

When you have the tools for the job and you know how to use them. Awesome stuff.

@thewildspy2301 2 года назад

Your video edit is amazing! So pleasant to watch. Thank you.

@henrywilliams4473 2 года назад

Like the honesty of the first vid, shame you had to take it down, been a Heavy Diesel fitter in a past life, sometimes the description kurtis uses is accurate, amazing what the old hissing hacksaw can do in the right hands, keep up the awesome videos from NZ

@johncoops6897 2 года назад

Hissing Hacksaw.... LOL. I've always called them the Gas Axe. I love the little train track carriage thingy that automates the cut - the constant speed and no shaking creates a really impressive straight slice!

@cda32 2 года назад

If I didn't see it I honestly would never have believed it was possible to cut so clean and precisely with a torch.

@butchshadwell3613 Год назад

What I really enjoy about watching your videos is how methodically you do your work. The sign of a true professional. It is clear why your business is a success.

@franklinhayes5398 2 года назад

I’ve only did that once. A lot of work goes into that. Love to watch you work because you know what you’re doing and you’re good at it. I look forward to your videos.

@OriginalMomo 2 года назад

Safety officer in his safety goggles…. Absolutely the most adorable staffie on RU-vid. Cheers 🍻 from America 🇺🇸

@stevelewis9677 2 года назад

No kidding right? Cute little dude looking handsome as hell in his work shirt

@citrusfarmer 2 года назад

I love watching a pro at work. They always make it look easy.

@yourdrummer2034 2 года назад

That torch trolley setup paid for itself 10 minutes into this video!

@peterlanum6970 2 года назад

I was a field mechanic and had to do that to a ripper shank for a excavator. It was 2" thick and I had to stick weld it used 50 lbs of 1018 rod and took all night. I was just getting the blankets on when the crew showed up and wanted to use it I said not yet.. now I sit on my boat and watch you do it.

@Bigmc757 2 года назад

Love your videos. As a welding supervisor for navy vessels, you did a great job with how you executed this repair. Keep up the good work and can't wait for your next upload. .

@Sparkey 2 года назад

This channel never ceases to amaze. So good to see how big metal is handled and manipulated.

@hermit3400 2 года назад

Extremely impressive welding and machining skills, but also great videography and editing. I love how he casually mentions that he made his own counter boring tool, a feat that in itself is beyond he capability of we mortals. Keep up the great work! I know you both work very, very hard. I wish you continued exponential success with your business!

@ckmoore101 7 месяцев назад

Its a gift to know precisely the correct point to switch to fast fwd mode for these. Just right amount of showing the details, and then speeding up to not get bored from the repetition. Brilliant!

@_Skim_Beeble 2 года назад

Impressive cutter, one pass for metal that thick is pretty good.

@passenger6735 2 года назад

Another massive repair. The shop counterbore tool seemed to work ok too. Great outtakes Karen. Thanks again everyone.

@toddlocke5423 2 года назад

Amazing work! True craftsmanship!

@LSswapEVERYTHING Год назад

Honestly, what blows me away MORE than the awesome videos, is that people break these things and actually find the piece that has broken off!

@mikefightmaster 2 года назад

Always like the explanations. Camera Lady does excellent work.

@fransdeklerk5013 2 года назад

Sitting here, reading the title and thinking... Damn this is going to be a short one. I am so glad I was wrong and as per normal the level of workmanship going into your work is just on another level.

@johnoconnor4941 7 месяцев назад

I love going through these again. Never fail to be impressed with the chunks you work with Kurtis. The videography just keeps getting better and better. Great work guys...

@garymcintyre1498 2 года назад

I'm a welder fabricator, and I think your good at explaining work process, and I will be watching alot more of your work

@ritchiechristopher5603 2 года назад

Your contractors are lucky to have a guy with your skills and knowledge - saves them a fortune - hope you charge well.

@papaburf7275 2 года назад

Excellent video work on this one again. Karen brings us in close on every operation and it really helps with the detailed understanding of what's involved. I really got a sense for just how patient Homeless is when Kurtis was fitting him with the glasses - what a ham and a great part of the family.

@roytsusui1761 2 года назад

That is top of the line work! You guy's do some really fine work. Thanks mate.👍💪😁

@chadwickcloister5143 2 года назад

hell of a job, hell of a repair, hell of a drill press. congratulations on being the best

@geoffwysham1731 2 года назад

Speaking of ripper shanks, hi, Homey! Thinking about those outtakes, Karen’s editing is masterful; she even makes *you* look smooth! Have a great weekend, Team CEE!

@ypaulbrown 2 года назад

Karen and Kurtis, thanks for not bleeping out with a 1000 hz tone any ultra descriptive phrases, I was only able to detect maybe 6 Fooks in the out takes.....as always, very enjoyable....this is one of my go to relaxation videos......Cheers, Paul

@Gattone_91 2 года назад

9:30 Those cuts are so clean, amazing to think they were made by melting away the metal.

@BrodieLee84 2 года назад

love the videos man. im not a welder or mechanic but i am constantly working with you guys and soaking up all i can. the things i have learned from you and others in the heavy duty world plays a huge part in the role i take as a supervisor for equipment and understanding if it is something i can deal with on my own or what route i need to take to get stuff fixed. also helps me call bullshit on contractors thinking i am going to be a pushover for some easy money. keep it up man. if i ever get a chance to go to Australia, i would love to see your operation.

@sawboneiomc8809 2 года назад

Two in one week?...freaking me out there Mate!

@CuttingEdgeEngineering 2 года назад

Haha yeah I'm sure some people's schedules were all messed up with the 2 videos 🤣

@sawboneiomc8809 2 года назад

@@CuttingEdgeEngineering I think there’s a video out there on RU-vid about Homeless.....ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1w4FJCcZTKU.html Hilarious

@MattysWorkshop 2 года назад

Gday Kurtis and Karen, I reckon when the tip breakers off it would go off with a bang, amazing how much punishment the tyne takes, the shop made counter bore tool works a treat, great video as always mate, thanks heaps, have a great weekend, Cheers

@georgelutz8212 2 года назад

Shop made Countersink was bang on.He is one talented tradesman.

@Ratlins9 2 года назад

Love everything about these videos, the camerawork, the narration, the before and after shots, the out takes and of course,the dog 🐕. Thanks for sharing your expertise in this field.

@coreylancaster1647 2 года назад

You're bloody good at what you do, love these videos keep it up

@gardnep 2 года назад

It was one of the best. I learnt you can turn high speed steel in a lathe (broken drill) this week. And autoexpert says weld metal is stronger than original. Maybe a beep or little animated explosion every now and then might reduce the “ profanity”, and we can always add our own.

@gardnep 2 года назад

Is that a flux cored wire you are using, seems to have a scale on it.

@gardnep 2 года назад

Being the star of your own gig is tough.

@FishFind3000 2 года назад

It depends on what rod your using but yes most of the time welds are stronger metal then the parent or host material. That’s why you will see new cracks form right next to the edge of a new weld.

@pilgrimm23 2 года назад

@@gardnep I noticed that too. also, how many MILES of wire and bottles of gas does he go thru in a month?

@pilgrimm23 2 года назад

So he needs some holes. Does he drill a itty bitty hole then use a boring bar? NO!!! the man grabs a MOTHER HUGE DRILL PRESS FROM HELL and does the whole thing in one pass! Notice the chips; that steel is layered in hardness

@kevinkc3onohelijeepworld953 2 года назад

Even funnier the second time. No need to remove the grey words just make it for adults 😉😉 it adds to enjoyment esp in the bloopers ☺️😊😁

@jamesmorgan6782 2 года назад

I believe you are the best welder I have ever had the privilege of watching absolutely amazing work.

@Ky-lb5ts 2 года назад

Nowadays I work with financial software all day inside but I grew up in a rural area so watching these videos reminds me a lot of growing up. Great work and that's an awesome doggo!

@JohnRoberts71 2 года назад

I always found the blooper footage or behind the scenes at the end enjoyable. It’s a shame, I enjoyed seeing the realism of what it takes doing videos and Curtis being himself. All I can do now is remember the good old days when people didn’t get offended or you had to worry about offending people.

@h4lk89 2 года назад

In this video i think u can see that the counterbore or more specific the chamfering was responsible for the crack to start growing. It would be super awesome if u can give us a close up of the cracksurface so we can see its progression if u dont mind. And dont forget every notch can make ur work fail earlier then u expect even if its such a big and heavy piece.

@stoopydh4878 Год назад

This is the video that out of random popped up in my feed some year ago. I watched it, got hooked, and watched a dozen more videos that weekend :D See you this friday guys!

@jamdiversified9698 2 года назад

I admire how much you know (and need to know) about all of the different industries you work on stuff for. Without that knowledge, you wouldn’t understand how things need to be fixed which is a massive amount of knowledge in and of itself also! Great channel!

@humancattoy7767 2 года назад

Thanks for uploading this video again. It's one of my favorites.

@tomesguerra5495 2 года назад

Dam Kurtis, it's nice to see someone so good at what they do. Great camera and editing Karen and the best four leg friend Mr Homeless 😀 👍

@Sojourning_ 11 месяцев назад

Hi Kirtus, I'm now 74 years of age, Retired Cat / Field mechanic, I'm very sorry to say, I'll never get to down under, I wish I had. generally ripping rock does that over time, Where I lived and worked, lot's of blue granite hard stuff. I have to say, high fives to the work you are capable of producing, I never known of anyone here in the states to take a blank the size you have and cut and mill it to fit, a ripper section. You do Superior work. Typically we buy a ripped shank lower end already cut and milled, and weld it on, what you do is amazing. There is no doubt in my mind, The LORD GOD of heaven and earth is blessed you, as for the language, It's up to you to define the man you want to be in all of life. No matter what your environment is. No man needs to foul out, just expand the vocabulary and it's a done deal

@MIKEMAKESTHINGS 2 года назад

WATCHING YOUR VIDEOS IS MY RELAXATION, PLUS IVE LEARNED A LOT. THANKS.

@evanschwartfeger551 2 года назад

Love the inclusion of outtakes. Only human of course

@Darkrif1957 2 года назад

You are a very talented man Kurtis, Love all ya work and vids cheers man

@billofalltrades2633 Год назад

I'm am so amazed at what you do. Very educational!

@bushmaster2936 2 года назад

I'm certainly glad that you re-posted this video as I missed it the first time. Incredible workmanship and skills shown throughout all of your videos by you and your Lady. Stay safe !!

@CuttingEdgeEngineering 2 года назад

Glad you enjoyed it!

@tacoma50 2 года назад

Good thing the pup is wearing his hi-vis safety gear!

@wynandbadenhorst5667 2 года назад

Amazing ripper nose repair. We have a workshop that also does this kind of repairs. We are called ESP Cape Town (Equipment spare parts) south africa. Love to see broken stuff get repaired. Great video Kurtis

@Stretch1931 2 года назад

It's fascinating to watch someone take the world's most powerful equipment on this Earth, and repair/rebuild something that is able to continue to be of use for a company. Without these large machines, the company comes to a complete halt. But also the amount of skill that no book can give. This is acquired by years and years of experience, and the ability to use all your senses and immediately know if it's good.

@joerobilotta2199 2 года назад

SOOOO love the out takes.

@richardhead8264 2 года назад

_Hey Kurtis, I was noticing your purple straps near the weld at _*_18:42_**_._* 👀 _Nylon reflows at 516°F / 269°C. So I just want to make sure that your straps are not being compromised by the heat._ 🟪🔥🟪

@tomanycooks 2 года назад

that massive drill press is amazing! I've never seen anything like it before. can you please explain a little about it in a future video? seriously impressive. homie is such a good boy.

@CuttingEdgeEngineering 2 года назад

Hey mate sure thing thanks for the suggestion 😎👍

@shrugg6593 9 месяцев назад

I kept wondering where i had seen you before. It just hit me! You remind me of Quint from jaws, Sing, "Farewell and adieu to you, fair Spanish ladies. Farewell and adieu, you ladies of Spain For we’ve received orders for to sail back to Boston. And so nevermore shall we see you again” Please!!!

@jonathandavid3632 2 года назад

Recently subscribed. Watching all the way from Trinidad. This is truly entertaining and great knowledge and skills in everything you do. When I think of how the hell are you going to perform those difficult task in every step, you pull out some amazing tools. Huge credit to being one man doing all that work and getting each job done in such a satisfactory manner. Love that pet and all the bloopers..Huge credit to your spouse in making these vids possible for our learning and entertainment.

@CuttingEdgeEngineering 2 года назад

Hey mate thanks for subscribing and the awesome comment we appreciate it 😎👍

@sawboneiomc8809 2 года назад

Still worth watching again.....

@antoniosergio7 2 года назад

Nothing better than waking up and seeing the notification from the cee, my Friday morning company before I go to work. Congratulations to the couple for the great content

@stephanvezina5729 2 года назад

I honestly love these videos. Ive only been welding for 2 years (almost 3 now) and this motivates me to get to work everyday. I would love to work on some of the stuff you do and I have a strong passion for welding! Keep up the awesome videos! Love the pup by the way

@CuttingEdgeEngineering 2 года назад

Awesome mate keep at it 😎👊

@danielkennedy1524 3 месяца назад

What a blast! As we say in the South in the USA yall are pros! love it! More the better! Kurtis you are a genius! We all look forward to the next episode! be well

@oigleoystereater2003 2 года назад

Would there be any chance, in your videos, of explaining how much the customer would save having you repair an item over purchasing a new one - how much is a ripper tyne against a ballpark repair figure. That might encourage more customers.

@randytravis3998 2 года назад

1 video Kurtis said he could build 2 hydro rams and still have change left over to the cost of a factory one ,, and his time is faster turn around ,

@CuttingEdgeEngineering 2 года назад

Hey mate thanks for the suggestion we will do that more often 😎👍

@powertool64 2 года назад

@@CuttingEdgeEngineering Oh Cool. I came to the comments just to ask that same question. Even if you can't say how much the customer paid/saved, it would be cool to at least hear how much a replacement part would have cost.

@Michigan-Tactical 2 года назад

Watching a CCE video without profanity is like watching a musical without singing. 🤣

@user-pe1zv4cj1w 2 года назад

我是中国人，第一次看你的视频，很喜欢你的作品！加油！ I'm from China。 I like your work very much

@electro9480 7 месяцев назад

Very magical, and so addictive watching your videos.

@user-mo9eh9vo2f 2 года назад

Классная работа, вообще прикольные у вас видосы с большим количеством сварки. Собачке привет. Лайк.

@andrewpowell6457 2 года назад

Thank you for our Friday evening entertainment / work

@AuditRecon 7 месяцев назад

You act like you've done this before. It's amazing a weld that strong. 5mm per minute @ 155amps. That's a hell of a drill press. the slow mo was outstanding. Good job.