Тёмный

Replace Front Brakes & Rotors 2007-2016 Honda CR-V 

Jimthecarguy
Подписаться 202 тыс.
Просмотров 83 тыс.
50% 1

Here are some of the tools that jimthecarguy uses
www.amazon.com...
Replace the front brakes & rotors is very easy once you see it done. All the Honda CR-V's from 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 are the same procedure. This Honda CR-V is a 2015.
Here are the tools used in my video. You can buy them on Amazon.
This is the link
amzn.to/2RKXcra Dual Piston Brake Caliper Compressor
amzn.to/2KH1I9h brake pad spreader
amzn.to/2xfX5u7 brake caliper hooks
Due to factors beyond the control of jimthecarguy, it cannot guarantee
against unauthorized modifications of this information,. jimthecarguy
assumes no liability for property damage or injury incurred as a result
of any of the information contained in this video. jimthecarguy
recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of jimthecarguy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not jimthecarguy.

Опубликовано:

 

3 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 93   
@wyattoneable
@wyattoneable 5 лет назад
Your neighbor is a lucky person. After the thousands of brakes jobs you've done over the years he can be certain this job was done correctly.
@jimthecarguy
@jimthecarguy 5 лет назад
Yes that is for sure . I can do them with my eyes closed.
@peter-dt6rh
@peter-dt6rh 2 года назад
@@jimthecarguy = Master Mechanic
@frankfromupstateny3796
@frankfromupstateny3796 Год назад
Nice, nice video. A real pro here. Listen...and listen well guys. This guy has prob. done 1000 break jobs. Like that hanger; perfect, or just cut a Clothing Hanger...making the "S" form....free.
@peterm6128
@peterm6128 2 года назад
Jim, I really like your videos. I go to them often before I start an auto repair project. You give a lot of details and what to watch out for, and usually give very good camera angles and lighting so that we can see what is going on. You're the best. I just completed a very successful disks and rotors replacement (front and read) on my 2008 CRV thanks to your great guidance. Thank you! Peter
@BlondieSL
@BlondieSL Год назад
I'm glad that I watched this again, because for some reason, I thought that the axle nut had to be removed in order to replace the rotors. However, today, I did the rear brakes and rotors. While the car was up, I took off a front wheel just to see and it sure looked like the axle nut didn't need to be removed. This vid confirmed that as well as reminded me. LOL So perhaps I need to do the front brakes as well before the cold sets in.
@brianduchscherer8271
@brianduchscherer8271 3 года назад
Excellent details and thanks for mentioning those socket/wrench sizes, that's a bonus !
@danielbenninghoff9251
@danielbenninghoff9251 5 лет назад
I drive a 2015 Honda CRV. Next year I will be needing brake pads . I will replace them after watching your video. Great job!! Thank-you!!
@710SURFN
@710SURFN 2 года назад
Best brake video by far. Thanks !!!
@jimthecarguy
@jimthecarguy 2 года назад
Glad you liked it!
@richardfabrizio8998
@richardfabrizio8998 2 года назад
Great job Jimmy. I liked that you worked in your garage too. Thanks
@91945punx
@91945punx Год назад
Great video, Jim. Really appreciate it. Not quite the same as dad explaining it to me, but he's gone now... so you are a wonderful fill-in mechanic/ teacher. Thanks.
@jimthecarguy
@jimthecarguy Год назад
Glad you enjoyed it
@mrchican7179
@mrchican7179 4 года назад
Thanks Jim...your videos are very good. Natural teacher. I hope you keep making them and that your channel brings in some cash for you.
@jimthecarguy
@jimthecarguy 4 года назад
I appreciate that!
@danrowe79
@danrowe79 2 года назад
Excellent instruction and video. THANK YOU.
@timthetoolman5522
@timthetoolman5522 Год назад
Well done. But did you remove fluid from the reservoir before pushing the caliper pistons back? If not, and the reservoir is fairly full, you will push the brake fluid back into the reservoir and it will overflow.
@condor5635
@condor5635 2 года назад
Great vid! I used a proper Philips head bit - not screwdriver - and banged with a hammer several times and some Kroil - 8 screws on all wheel came off easily after that with a screwdriver. Similar to what you did. I reused mounts after wire brush. Bosch mount we’re not identical to OEM and had little dog-ears that scraped. Should have those rotor removal bolts ready for use. Banging on the rotor not necessary. All rotors typically have the threaded holes. Great vid!
@historichouseguy1
@historichouseguy1 Год назад
Thanks Jim, great review as its been awhile since I've done a brake job. I noticed my wife's 2016 crv has some spring clips to retain the pads, have not seen that style before. should end any annoying rattle.
@mattappleyard92
@mattappleyard92 3 года назад
excellent video Jim, thanks from across the pond,
@karldore8800
@karldore8800 2 года назад
Merci Jim! Une excellente vidéo! Très bien expliqué: clair et précis. J'ai procédé aux changements de mes freins avec vos conseils: un charme!!! A+++
@gsnowakowski
@gsnowakowski 3 года назад
Good explanation, sir. Thank you.
@thomastommy1192
@thomastommy1192 5 лет назад
Great awesome video. As always you do great work. I hope you have a blessed week. Thanks for sharing your video.
@jimthecarguy
@jimthecarguy 5 лет назад
Thanks for watching.
@pppcguy
@pppcguy 4 года назад
Nice work. Thank you
@globalchaos1984
@globalchaos1984 Год назад
Thanks for sharing ur knowledge, much appreciated!👌🏻
@schifoso
@schifoso Год назад
2016 CR-V has pad spreaders. For rust bolts, PB Blaster works wonders. If you can pull the caliper off without trying to push the piston back first, I'd recommend not pushing the piston back first. You can then clean off the exposed piston (which can be layered in crud or rust). Put a thin film of brake fluid on the exposed part of the piston and then push them back into the caliper - the layer of oil makes pushing back the piston easier. Also, if you don't clean it, you're just pushing the crud back behind the seal. Finally, check your brake fluid reservoir level before pushing back the piston. If it's been topped off pushing back the pistons could overflow it.
@EricSiGao
@EricSiGao 2 года назад
Thank you for sharing. It’s great help
@A_O-o3p
@A_O-o3p Год назад
Great video thanks a lot nailed it out
@petram.1386
@petram.1386 Год назад
Thank you so much for your videos.
@jimthecarguy
@jimthecarguy Год назад
You are so welcome!
@buckshot3333
@buckshot3333 10 месяцев назад
thank you
@circusfreakRob
@circusfreakRob 2 года назад
Very detailed. Thanks so much!
@jimthecarguy
@jimthecarguy 2 года назад
Glad it was helpful!
@armedmikel9672
@armedmikel9672 11 месяцев назад
Great video. Thank you sir.
@jimthecarguy
@jimthecarguy 11 месяцев назад
Glad you liked it!
@techguy9999
@techguy9999 5 лет назад
great video and explanation, thanks
@jimthecarguy
@jimthecarguy 5 лет назад
I'm happy to help.Thanks for watching.
@henrydu9982
@henrydu9982 3 года назад
you should use jack stand for safety. Good video
@duckflynn3849
@duckflynn3849 10 месяцев назад
he has the caliper guide pins on wrong the one with the notch with the rubber grommet goes on the bottom
@jorgevilchis2217
@jorgevilchis2217 3 года назад
Amazing work!
@crisprtalk6963
@crisprtalk6963 28 дней назад
Hey JIm, one pin has a rubber seal at the end the other one doesn't. Which one is the top and which one is the bottom pin? I've seen conflicting info online. Thank you.
@tripjet999
@tripjet999 Год назад
Brake fluid should be changed and brakes need to be bled, though.
@senihabaharoff1016
@senihabaharoff1016 2 года назад
Jim, thank you for the video, it's a nice clean job, if I was a Honda dealer I'll make you my manager. That grease you using, is that a white grease?
@encoreone
@encoreone Год назад
Hi, my crv has single piston brake caliper, does this doble piston brake calipers would fit in my 2007 crv without any trouble ?
@daviddaigrepont9485
@daviddaigrepont9485 Год назад
Couldn't the problem of shuddering have been solved by turning the rotors?
@BUGMAN-22
@BUGMAN-22 3 года назад
THANKS VERY VERY WELL DONE...
@huskyng6981
@huskyng6981 2 года назад
do you always have to change the front brake too, because I just find only 1 passenger rear brake pad and rotor bad...the small shop mechanic told me to change both rear rotor and pad...but dealer told me to change all 4 front and rear...
@rsaldana2310
@rsaldana2310 4 года назад
Which is caliper torque bolt?
@herro2015
@herro2015 5 лет назад
Nice job thanks
@jimthecarguy
@jimthecarguy 5 лет назад
I'm happy to help. Thanks for watching.
4 года назад
i have a 2016 crv went for inspection honda says i need rear pads with rotors cause of some rust
@jimpie231
@jimpie231 3 года назад
Good video. I have a 2009 Honda CR-V, which pin goes on top & bottom, both in the front & back (smooth & 3 sided)? I’ve watched a bunch of videos and I’m confused.......Jim
@JMORONTA
@JMORONTA 2 года назад
Thanks 💪🏼🙌🏽🙌🏽🙌🏽
@rambo2981
@rambo2981 3 года назад
Good descriptive audio but the video could be better with close-ups and better light.
@jeffhaze6548
@jeffhaze6548 3 года назад
Jim thank you for the video. I accidentally loosened a brake line bolt and quickly tightened it. However some fluid did leak out. Should I now have the brake lines bled for air? I also noticed a small amount of fluid from the master cylinder when done. I assume this is from compressing the Pistons for the new pads? Thanks Jeff
@jacksongil9123
@jacksongil9123 3 года назад
Do you have video on how to change lug nut
@SuperVarunan
@SuperVarunan 2 года назад
I tightened the guide pins but for some reason there's still some play when I move around the caliper itself. I tried tightening it down more and I snapped the guide pin bolt in the the guide pin and had to replace it. Is it normal for the caliper to have some play once it's installed?
@rakeshautorules
@rakeshautorules 2 года назад
is the brake pad same for 3rd and 4rth gen
@marcdun2814
@marcdun2814 2 года назад
Thanks
@jimthecarguy
@jimthecarguy 2 года назад
Happy to help!
@sidmanga273
@sidmanga273 4 года назад
Hi Jim is it necessary to bleed before installing pads and rotors?
@Cynical2012
@Cynical2012 2 года назад
My new rotor drags a bit, any advice?
@howardschwartz1538
@howardschwartz1538 5 лет назад
Jim, I noticed that you're using a scissor jack as a jack stand. Is it recommended to do so?
@jimthecarguy
@jimthecarguy 5 лет назад
Actually it is not a good idea but is better than nothing. I was not at the shop i was working at home. Thanks for watching. Don't forget to subscribe.
@Johnny53kgb-nsa
@Johnny53kgb-nsa 5 лет назад
I like watching your jobs Jim. Do you know of any common maintenance issues with the 2006 Ford 500 that I should watch for? Thanks, John
@jimthecarguy
@jimthecarguy 5 лет назад
The most important thing to do is change your oil regularly. Thanks for watching. Im happy to help. Don't forget to subscribe.
@ianoswin7457
@ianoswin7457 5 лет назад
Great vid jim! Is it any different doing the back rotors and pads? Haven’t seen anyone do those.
@jimthecarguy
@jimthecarguy 5 лет назад
Thanks for watching.
@palerider6099
@palerider6099 4 года назад
Mine has clips and an extra plate why?
@ExtremeRecluse
@ExtremeRecluse 5 лет назад
Leave the small screws out
@ExtremeRecluse
@ExtremeRecluse 5 лет назад
Anti-Sieze all mating surfaces and bolts
@realname6586
@realname6586 2 года назад
If you use lubricant on bolt threads, you have to decrease the torque setting or else you'll be overtightening the bolts.
@elizabethlear9720
@elizabethlear9720 3 года назад
Are the retainer clips part of the missing hardware?
@rodm140
@rodm140 3 года назад
good question
@ktp4813
@ktp4813 4 года назад
Thanks for the video! You have a NYC/Long Island Accent. You from any of these areas?
@jimthecarguy
@jimthecarguy 4 года назад
Close I'm from New Jersey.Thanks for watching.
@brickswisher7672
@brickswisher7672 4 года назад
I thought he was Aussie.
@brickswisher7672
@brickswisher7672 4 года назад
oi oi oi
@wesleymiller4856
@wesleymiller4856 Год назад
That’s not a 2015 that 2007-2011
@bodgitandleggitgarage
@bodgitandleggitgarage 5 лет назад
1st BOOM
@jimthecarguy
@jimthecarguy 5 лет назад
Thank you Leon
@jamestubb1949
@jamestubb1949 4 дня назад
Do you think if brakes fail your cheap friend would walk. You were used
@jimthecarguy
@jimthecarguy 16 часов назад
.
@smokeydabeecharlescoleman8365
@smokeydabeecharlescoleman8365 3 года назад
Sure beat the hell out of it,lol. Next time use a threaded bolt in the face of the rotor to separate it . Way to aggressive here.
@aholecop5547
@aholecop5547 4 года назад
this is a $1000-$1300 job in my town
@ttdelta2
@ttdelta2 4 года назад
OMG! Where you live?
@vascothomas586
@vascothomas586 Год назад
If you are a mechanic and you have a garage how come you didn't do the job by lubricating the sliding pins taking them out cleaning them and lubricating them that's a very important part I wouldn't take my car to your garage.
@jimthecarguy
@jimthecarguy Год назад
You obviously don't know what you are talking about. Did you see at 15:59 where I took the pins out cleaned and siliconed them and then reinstalled?
@kylegauths4718
@kylegauths4718 3 года назад
can you make this freaking dog shut up !! That would drive me crazy !
@lilibethbeltran3045
@lilibethbeltran3045 2 года назад
Drone use by the system to create fire in the forest
@lilibethbeltran3045
@lilibethbeltran3045 2 года назад
Drone use by the system to create fire in the forest in California
@lilibethbeltran3045
@lilibethbeltran3045 2 года назад
Drone use by the system to create fire in the forest in California
Далее
How to Replace Front Brakes 07-11 Honda CR-V
25:33
Просмотров 116 тыс.
Китайка стучится Домой😂😆
00:18
iPhone 16 & beats 📦
00:30
Просмотров 97 тыс.
How To Replace Rear Brakes & Rotors 2002-2011 Honda CRV
29:05
2014 HONDA CR-V - REPLACING REAR BRAKE PADS - DIY
10:23
2016 Honda CR-V Front Brake Pads and Rotors
14:48
Просмотров 1,9 тыс.
How to Replace Rear Brakes 07-11 Honda CR-V
18:00
Просмотров 139 тыс.
How to Change Brake Pads 2015 Honda CR-V
11:32
Просмотров 7 тыс.
Китайка стучится Домой😂😆
00:18