Replace fuel filter 1.6 hdi diesel citroen berlingo 

Absolutely perfect instructions, especially the priming. Bought the part online and fitted it in around 10 mins. Thank you. Peugeot Partner Tepee 2012.

Brillant video very well explained your the only one to show how to do everything step by step even when priming it that takes a lot of pumping. Thanks .👍

thank you for showing me how to do this...........I pre filled my filter with diesel before re assembly to save doing all that priming, worked well..........

Agree with previous comment, perfect instructions, including hiccups & tips. Undertaken this procedure on many occasiions and it coundn't have been shown & described better. Well done. Fascinated by the battery angle driver; useful tool.

Thanks a million for your video It saved me a trip to the garage as I found the power cable had become unplugged . I didn't know where the filter was until I viewed your video. Cheers

Thanks loads motor buddy. Just change my fuel filter on my citroen berlingo van after watching your vid. Pretty straight forward. 👍

A brilliant video everything clear. I am doing this on a citroen c4 2013 and this is the same. I could not find any other video that covers everything like you do. Well done and thank you.

I was priming for ages, van wouldn't start, then I realised I was pumping diesel straight onto the ground! The lever wasn't clipped shut even though I had turned it anti clockwise. You have to push it down as well as anti clockwise for it to lock properly!

Many thanks, you made my day changed fuel filter on our peugeot 5008 2011, all went as per your video, the only trouble i had with was the sensor, getting it off was not as easy as in your video. Would not have done it without your help!

Excellent thank you for producing this helpful & comprehensive video

Very helpful, you definetely eased my work 👍 Thank you and keep up the good work 😀

Práce pro jednorukého s kličem na olejovky.... diky za video... 🙌

Very clear, it helped me to change filter.

Excellent vid..now I can get my filters and change them myself🌞😄

There was fuel coming up when i was priming. It was around the primer pump. I was nearly ready to cry 😂 everything that can go wrong is going wrong these days. I think the white plastic might have cracked r something. Besides that there was fuel between the black pastic and the white. After i took apart the old. Also that thing wasnt popping up after i twisted it to release the fuel. I had undo the three screws first and pull the filter away from the plastic to release the fuel. Anyways i prayed the the Lord for everything to work and it seems like it has praise the Lord. This is the second time i did it the first time went much smoother. I think i might have to buy the black plastic part with the primer and replace it maybe. Word of warning try to finger tighten the three screws so the plastic does not crack. Be careful taking the pipes off particularly the one at the back a bit of the yellow plastic part you push in broke off on mine it was very hard to open. Like i said the first time was much easier. I hope if i have to do it again that it will be more straight forward. It might be good to use a wide flat head screw driver to put the part to open it.

Thanks for helping me. without this I wouldnt dare to try myself and now I done it. perfect! / Peugeot Partner 2013

Good man yourself....all the info i needed...thanks👍

자세한 설명으로 연료필터 잘 교환했어요. 고마워요.^^ Thank you. From S.Korea.

Excellent video, thank you.

Brilliant well done for showing this and easily explained

After priming for a few minutes,take off the pipe on the right with green clip. Pour some diesel inside the hole and put hose back on making sure it clicks closed. Prime again afterwards

Cheers mate, same setup on Peugeot Partner 1.6 hdi 2012

Very good man thumb up well done

thank you, iforget to fix the middle sensor and struggled more than 1 hour to get the fuel out by pumping, 6:20 save me . Citroen Aircross 2012.

Many many thanks! You saved my day with that video! I accidently turned the middle housing during the filter removal but didn't noticed. I was unable to get the fuel out (pumped like crazy) and called the ADAC ... it couldnt help either.... than, later on, i found your Video with that hint at 6:20! Closed the valve, pumped the pump and... day and a lot of money saved:) Many thanks:))

Great video thank you 🍀💚🇨🇮

Just done friends 308 ! Pressing that bulb down done my head in, so I pulled off fuel line to filter and via a hose and a tiny funnel filled it up ! Way quicker this way 👍

Excellent video. The Haynes manual has got it all wrong. Makes sense now I have watched this.

Excellent video 👍

I managed to crank engine over a few times to build pressure, and I slackened the plastic centre fitting to enable air to escape filling the filter bowl, it worked for me, didn't touch the prime pump, didn't realise that's what it was for!!

Excellent video thankyou

Brilliant instructions

Thank you for this

Muchas gracias!!!!

Thankyou,just changed mine

Thanks mate well good vidio.

Top video. Thanks.

Thanks very informative, looks like its raining into your open oil cap though not too healthy

Thanks ma man ❤️

لقد استفدت من هذا الفيديو ولك جزيل الشكر والتقدير رغم أني لا افهم اللغه التي تتكلم بها .

This has the same fuel filter as my Peugeot 207 SW 1.6 Hdi so this vid would be helpful to me

Thanks pal 🙏

Big thanks

i want to do injector purge on the same engine but not sure are the lines marked green and white return and feding lines or are there more lines?

Thankyou very much for the instructions, just wanted to ask is the fuel reusable?

Replace today and have leak fron the down..i didn't see any seal ring or something that goes there what can cause that

Do you need to turn off any of the fuel lines before hand?

After changing the fuel filter i do the priming but the car doesn't start now there is no fuel coming to the filter.any ideas why?

Any videos of the fuel pump

💯👍👍

Ačiū tau 🤝👍🫵💪

Thanks for your video I just changed the fuel filter. Half way through wring this i remembered I didn't put the black switch back to original position. Thankfully I was able to put it back without having to take it all apart again. Do you have a video on changing the pollen filter ?

✌

esto causa los codigos P0093 y P0087 correcto?

Hi great video. This is the dv6c engine yes? Please can you confirm if this engine comes with an electric fuel pump in the fuel tank. Thanks

i was afraid a screw would accidentally fall in the oil cap you left open,i suggest you keep it capped.

I have problem in morning some time i need to pump thet cap to start engine i need to park car nos down to prewnt problem, what can be is thet pump one way walwe?

What year of Berlingo is that mate?

Alright mate I'm working my bosses peugeot expert 2014.1.6 hdi any idea where the fuel pump is. The back of van is full of shit I'm guessing could it be in tank ?

This method doesn't work 100%. You need to prime the filter first with a suction pump on the outlet (RH) spigot, THEN use the priming button to pressurise the fuel rail. If you try to use the priming button alone it simply isn't man enough to lift fuel out of the tank.

How long does it take for god sake .... I've been pumping for about 20 min n nothing but dead battery

what year i s this engine mate?

I do al this thinks bat the care not starte ... Wey

why just not filling the fuel filter with diesel while you change it so it will be less effort to prime it

Allumage Peugeot Laguna

can bad or old fuel filter could be reason why car could lose power in driving or have hickups lijke he needs fuel and wants to shut off

Thank you! Sure, you aren't a teacher?

U need a gazebo

It's not mechanic-ing if it's not raining and cold...

I went through the procedure and found out, that the right lower Torx was stripped. 👿 Now I have to get some Tool the get the screw out and file a slit inside the head. 👿