Replace Leaky Rusted Pipes Easy

Подписаться 12 тыс.

Просмотров 107 тыс.

50% 1

Original Rumble video: rumble.com/vn9bwl-replace-lea...
Porter-Cable Reciprocating Saw: amzn.to/3l2Twkx
Diablo Demolition Blades: amzn.to/3l4k84G
When your steam radiator pipes -- or any pipes, really -- have leaks, are rusted out, or are in need of replacement you can easily do the job without needing to call a plumber or HVAC specialist.
My radiator pipes developed pin holes over the years, which I have shown in another video how to temporarily repair. My "temporary" repair was actually about 7 years, but when it sprung a new leak at the end of the last heating season, I knew it was time to replace the pipe with a new one.
This video shows you step by step how to easily do this job yourself and save hundreds of dollars from not having to call out a professional.
Here's a link to the temporary pipe repair video:
• Cheap, Easy DIY Radiat...
BUY US A BEER 🍺!
www.buymeabeer.com/ruggedhome...
Prefer a non-alcoholic option?
BUY US A COFFEE ☕️!
www.buymeacoffee.com/ruggedho...
************************************************************************
Share this video!
• Replace Leaky Rusted P...
************************************************************************
Subscribe to my channel for more great homesteading ideas
ru-vid.com...
************************************************************************
THANKS FOR WATCHING!

Хобби

Опубликовано:

2 окт 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 101

@SchlifkaSmith 11 месяцев назад

Easy as pie method. Day one (10 minutes): I sprayed a 3/4tjhs can of PB Blaster on the threads and waited until the morning. I waited a few minutes between each spray. Day two (3 minutes): I drilled two small parallel holes into the pipe that was seized then used a bigger bit to make the two holes larger. I inserted a long and thick screw driver through the two large holes and used two hands to twist the pipe off. It didn't spin at all until I actually tightened the pipe first. Then when I went the opposite direction it spun off immediately. It took longer for me to get my tools than it did working on the pipe.

@ctsfiddler 6 месяцев назад

Good job, amazing you found a HD worker to help you cut the pipe, when i go no one is around.

@chephoenix2551 Год назад

I appreciate the video. It seems there are a lot of people in the comment section with other options, but not posting a link to their work. As a Johnny homeowner who does most of my own work videos like yours save me a lot of aggravation. Thank you!

@HomesteadDIY Год назад

Thanks! And considering the technique was shown to me by an HVAC guy, it's clear they've run into stuck pipes themselves and it ultimately is a quick solution, tho sometimes the pipes just need a little bit of an attitude adjustment.

@robertoconnor456 6 месяцев назад

20 mechanics will do something 20 different ways. If they all achieve the same results than who's to say one way is better than another. Personally, I would have only cut the pipe on the tee side. But much closer to the tee. Then broken the cast 90* ell off on the other side with two small sledgehammers on the other. I also would have cut and caped the remaining nipple out of the tee, but by using 3 shallow cuts other than that single (too) deep cut that was made here. by doing so, you don't cut into the threads like the video reveals @ 8:57. Replacing the 90 makes it easier when reassembling this, especially if there's no give and can't pull it apart slightly to get the union in.

@gergemall 4 месяца назад

Well said ❤.

@derrickmoore5506 Год назад

Your suppose to use two renches when tighting the union

@faronsquare4911 5 месяцев назад

You're supposed to use a " w " when writing the word "wrenches"...😂😂😂

@bmpopeful Год назад

Great video. Helped me with my project. Thx.

@medicalnegligence 7 месяцев назад

Very helpful!! Thanks for posting.

@allaboutgreen1 Год назад

What an awesome video! Thank you very much! It's helped me a lot!

@HomesteadDIY Год назад

You're welcome. Glad it helped.

@glorygloryhallelujah 2 года назад

@ruggedhomestead. Great vid. I was shocked to hear that home depot would thread the pipe. I'm going to attempt to install a Hartford Loop on my single pipe steam system.

@HomesteadDIY 2 года назад

I never heard of a Hartford Loop before but from what I see from diagrams it looks like what my system is. I guess that's pretty much the standard now to prevent furnace breakdowns and explosions. Good luck with your efforts.

@1960jogo Год назад

You can use only one union in one side to save some money,good job👍

@liveevents9191 Год назад

Very nice presentation. Nice work!!!

@HomesteadDIY Год назад

Thank you!

@peterjohnson9865 3 месяца назад

parallel long thread with socket and backnut and other end of pipe threaded taper very old style of union joint used on heating pipes

@rotarythread 2 года назад

I didn't know those union rings lol! Learned something new

@HomesteadDIY 2 года назад

They are a lifesaver. When originally building a heating system you don't need them obviously because you're just screwing pipes and joints end to end, but when you have to join something in the middle, you can't work without them. Cheers.

@conqueringlion420 Год назад

Beautiful work

@HomesteadDIY Год назад

Thank you

@joedeware955 8 месяцев назад

Love this video! Thank you!

@HomesteadDIY 8 месяцев назад

Thank *you*!

@gergemall 4 месяца назад

Thank you very much.

@bernard0550 Год назад

Good job.

@HomesteadDIY Год назад

Thanks!

@ptech88 9 месяцев назад

Why not remove the 90 and pipe from the new

@jamesdemuro5923 2 дня назад

Great work 👌Good video

@HomesteadDIY День назад

Thank you!

@bricemadden5717 2 года назад

nice video very helpful

@HomesteadDIY 2 года назад

Thanks!

@relerfordable 10 месяцев назад

I'm about to attempt this. I've fixed three pin holes last year. I see what appear to rust spots of future ones.

@HomesteadDIY 10 месяцев назад

You got this!

@BOSS_805 2 месяца назад

I have about 60 ft of pipe and fittings to replace in my basement (heater radiator lines) I need to tackle 💯🤷🏻‍♂️🤦🏻‍♂️

@charlesfrandolig5090 Год назад

The amount of your threaded pipe going into your union or fitting is called your DRAW . As in, this bitch is gonna take 6 inches of DRAW, installing pipe is so much fun.

@HomesteadDIY Год назад

Lol! Yeah, they're a real party.

@paulkenney5846 Год назад

PS just a tip use copper anti-seize on Union threads it will come apart a lot easier

@HomesteadDIY Год назад

Hmmm. I'll have to look for that. Thanks!

@moemanm1202 11 месяцев назад

Is there a union for steel pipe to PVC?

@HomesteadDIY 11 месяцев назад

There are rubber fittings that have pipe clamps at either end that can be used. I have an old waste pipe in my basement that connects to PVC running to the upper floors. It's joined together by this thick rubber joint (neoprene, really, I think). Something like this: tinyurl.com/3k68spzn.

@dontcare9689 10 месяцев назад

I sure can't use a plummer that works backwards.

@netaverse7694 Год назад

Got yelled at by a kid employee that didn’t know that homedepot threads pipes in the store 😐

@HomesteadDIY Год назад

I miss the days when Home Depot employees were professionals in their respective fields

@l.b.7543 Год назад

I noticed the thread machine is always busted at a few Home Depots

@NNITRED Год назад

@@HomesteadDIY - Hechinger's was awesome in that regard. Those guy knew their shit. They held free in-store classes for DIYers.

@HomesteadDIY Год назад

@@NNITRED Aah, the good old days :)

@ecruz1628 2 года назад

Nice video. But if you don’t clean all the oils added they will end up back inside of the boiler and create pipe banging noises. Please correct me if I’m wrong thanks.

@mikeking7470 Год назад

Air in pipes causes the banging.

@jimhartland3943 Год назад

It will cause a surging water line

@southothehighway 10 месяцев назад

Is that a wet return on a steam system?

@HomesteadDIY 10 месяцев назад

Yes

@charlottehigdon903 Год назад

I have a pipe that is broke it is between a wall A plumber came and broke it with a snake. Then told me he didn't have to fix it because it was galavized pipe. Then he tell me it will cost around $15.000…00 to fix I have got to dig my floors up and run all new water lines, I can't afford that is there something you can help me with. I am 73 yeàrs old on à fixed income, just tell me what to do. Please thank you

@HomesteadDIY Год назад

Charlotte, that sounds awful. With galvanized pipes (or even cast iron) they can become very corroded and brittle especially in older homes, and from what I've read plumbers typically aren't responsible for such damage, as unfair as that may sound. Unfortunately, I have no solution for you as it doesn't sound like an easy fix with the pipe being under the floors. I can only suggest calling a couple of plumbers and try to get different estimates and hopefully you will find one that's reasonable. Also, look up programs that your local and state government may have. New York, for example, has a program called RESTORE that offers grants for emergency repair services for the elderly. Maybe also check with a family member or neighbor for assistance. Good luck, I hope this works out for you.

@paulkenney5846 Год назад

Why did you not take the whole fitting out and go to the next 90

@HomesteadDIY Год назад

Don’t you throw logic at me! But actually there is a tee where I did cut it that I had closed off with the idea of reconnecting it at a later date (that date is still well into the future :) )

@paulkenney5846 Год назад

@@HomesteadDIY I saw the tee and the close nipple between it and the 90. The threads are a week point. The next place it will leak is that close nipple. I was just saying that maybe if you have to do a repair again something to think about. Any way nice job sorry I did not mean to insult you that was not my intentions.

@HomesteadDIY Год назад

@@paulkenney5846 Not at all. I didn't take it that way, because of course you're right. I should have just gone right to the 90 because I had already replaced the pipe at the other end of that elbow so going right to it would have been the smart thing to do. Cheers!

@l.b.7543 Год назад

That guy has an electrical issue waiting to explode. Look at all the wires all over the place.

@HomesteadDIY Год назад

It makes all the work that much more exciting!

@officerkasharwanbanyashsha8424 2 года назад

You should have tried a torch. Heat that shit up and it should loosen it

@jimfish5981 2 года назад

Plus a second Pipe Wrench.

@SuperWayneyb 2 года назад

or you could do it the correct way and heat up the fitting then wind it out while it’s still hot 👍

@HomesteadDIY 2 года назад

I guess there always has to be THAT guy on the internet who believes he smarter than everyone else and races to express their smug superiority. I've used both regular propane torches and MAP torches to heat the pipes to no effect, so rather than wasting time with that intermediate step, I now just jump to cutting it out since it's quicker. Everyone has a choice when they post a comment to offer constructive criticism or be you. We know which path you chose. Cheers!

@SuperWayneyb 2 года назад

@@HomesteadDIY After over 40 years as a pipe fitter/plumber I was offering advice take it however you wish

@HomesteadDIY 2 года назад

@@SuperWayneyb it’s more the smart ass attitude of I “could do it the correct way” that was objectionable. As I said, constructive advice can be offered or you can try to troll. Cheers

@SuperWayneyb 2 года назад

@@HomesteadDIY You could not be more wrong have a nice life fella

@jimfish5981 2 года назад

That T looked shitty, I'm shocked the threads looked that good...

@HomesteadDIY 2 года назад

Heh. I don't disagree.

@smc3453 Год назад

what the hell was buddy thinking with that tape lol what the

@HomesteadDIY Год назад

lol hey any port in a storm. It held up for years!

@docholliday2961 2 года назад

Honestly why all that hustle when you can just replaced the elbow all that hammering would do more damage to other sections just my opinion . Respect your work don't take it personal sir 👍

@HomesteadDIY 2 года назад

In reality I should have just replaced the elbow, would have been much easier, especially because I had previously closed off the radiator that the section tees off to (you can see the plug I inserted at the 8:50 mark, though I have hopes to one day restore it). At the other end, though, it's attached to copper and I was concerned that if it was difficult to come off I might damage the copper...and I don't trust my soldering skills enough to use them on my heating system, though I've done it before. This seemed a happy medium. Cheers.

@gabakusa Год назад

use a torch better

@HomesteadDIY Год назад

I used a regular propane torch and a MAP propane torch. Neither worked. This worked just as well, though perhaps a little more muscle was needed

@JTTTTx 7 месяцев назад

Always use pipe wrenches in pairs and no pipe compound inside the fitting. Also,you don’t have a “ furnace “ , you have a Boiler.

@zeez9053 2 года назад

Disgusting that pipe wasn’t made rustproof

@darrent6814 2 года назад

Shut up

@user-xn4cy8js7c 9 месяцев назад

Black pipe used on heating lines.

@albertoford6986 Год назад

You doing more talking than replacing omg

@HomesteadDIY Год назад

I see you stopped taking your Ritalin medication. I recommend you go back on it

@walterheublein5848 2 года назад

should use all copper

@HomesteadDIY 2 года назад

Agreed! And that was the original plan, but I decided not to take out a second mortgage on my home to pay for it. :)

@thomasmcalear8673 Год назад

BUY A TORCH ALREADY.

@HomesteadDIY Год назад

Guess you didn't bother to actually watch the video where I said I tried both a regular torch and a MAP torch without success. But thanks for playing

@cliffp73 Год назад

F it! It will be someone else’s problem my incompetence

@HomesteadDIY Год назад

I’ll be dead by the time it’s an issue so…I win?

@darrisgoodrich7745 4 месяца назад

I see so many mistakes that it's not funny, one thing is where's your plumber's tape at.

@HomesteadDIY 4 месяца назад

At your mom’s

@jamesgotti8102 3 месяца назад

Pipe dope is like tape it seals it...

@donschafer3428 3 месяца назад

@@HomesteadDIY😂awesome reply! Every time a solid DIY guy does a good video, you always get these ‘Workers of the World’ comments TRYING to bust them down! So glad you hit back! Excellent video!

@HomesteadDIY 3 месяца назад

@@donschafer3428 Lol! thanks. There's criticism and then there's trolling. When people offer a constructive technique I'll listen. When they post with an attitude I just give what I get. Thanks for watching!