Replacement Transom for a Zodiac Mark 1 and Mark 1 Futura - How to install a new transom.

Просмотров 7 тыс.

% 200

On this episode of INFLATED!!!
On this episode, installing a new transom on this Zodiac Mark 1 with o e of our in house custom built transoms. Filled with lots of knowledge on how to replace the transom on your Zodiac Mark 1 or Mark 1 Futura!!!
Hit that LIKE button if you enjoyed...
Subscribe if your new to the channel!!!
Happy Boating...
For partnerships or sponsorships, please contact us at gashopperinc@hotmail.com
For merchandise, boat parts, supplies or even
inflatable boats, visit our website at www.gashopperinc.com o www.theinflatableboatshop.com
Follow us:
Facebook: @gashopper
Instagram: @gashopperinc
We're now on Patreon. Your donations and support will help us provide you with more indepth videos
Patreon subscriptions/donations: at www.patreon.com/gashopper
For other donations and support can be sent to www.paypal.com/paypalme/gashopper
#winnipeg #selkirk #eastselkirk #stclements #interlake #lakeofthewoods #Manitoba #ontario #canada #ohcanada #inflatable #inflatableboat #inflatableboats #inflatablerepair #zodiacboat #zodiacnautic #zodiacboats #transom #transomrepair #newtransom #betterthanfactory #futurasport #zodiacfuturasport #zodiacmark1

Хобби

Опубликовано:

11 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@sentinel2nodoge201 14 дней назад

Great work. 💪

@gashopperinc 14 дней назад

Thank you! Cheers!

@routable 11 месяцев назад

Thank you so much for doing this video! I am wrapping my first transom re-glue repair and this was SUPER helpful. I like how you did the sides first (earlier videos you did bottom then sides in one section/session) and then did the bottom as another step. Lesson learned for me is don't rush gluing the next section. I should have let the sides of the tube really set and don't put any glue on the bottom. Do the bottom as a completely different section, essentially a separate gluing session. Thanks again!!

@stevendegracia6713 Год назад

Liked the commentary!! Keep up the good work!

@js1981ful 3 месяца назад

Thanks for sharing your vidios with us, Always very informative 👍

@gashopperinc 3 месяца назад

My pleasure!!!! 😁

@ExploringCabinsandMines Год назад

Try an oscillating multitool for sanding ?

@user-jn6qd6kn1n 7 месяцев назад

Jolie travail

@gashopperinc 7 месяцев назад

Merci beaucoup

@berndburkle1764 Месяц назад

Super video ! One question: Did you use always a heat gun for removing the old bonding ? I'm a little bit afraid of damage the tubes. I would be happy for a reply.

@gashopperinc Месяц назад

Yes, but have to be careful because you can cause damage if to hot.

@berndburkle1764 Месяц назад

@@gashopperinc Thanks a lot for your fast answer ! I will be careful with the heat gun. Well , here in Germany we have with one brand a lot of problems with transoms who rot away in 1-2 years. The problem is the hole for the valve in the transom. The wood is not protected with epoxy or something reliable. Therefore we want to remove these shit transoms (made of trash wood) an replace them with marine plywood and glassed with fabric an epoxy.😊🙋‍♂

@arthurc.stifeliv9570 Год назад

Like your video and back ground music. What brand/type of glue are you using for binding the transom to the pvc compared to the brand/type of glue used on patches and repairs, or reinstalling handles and ore mounts?

@gashopperinc Год назад

Any 2 part glue is sufficient. But we use Zodiac Z7096 for PVC, Z7098 for Hypalon/CSM or Stabond glue for repairs at our shop. It's strong and durable. Never use a 1 part glue, as it will fail.

@tyfab6288 9 месяцев назад

I keep watching your videos like 100s time. So valuable! Thanks! So I reglued the transom side pocket and bottom floor. However, the 2 corner side from The floor didn’t glue properly, probably because I didn’t put enough pressure. Do you just need to reapply glue on the corners as per manufacturer guide or completely redo it all?

@gashopperinc 9 месяцев назад

Just clean up and reglue. No sense on taking apart the freshly glued areas that are holding strong.

@tyfab6288 8 месяцев назад

I kept watching your videos 1000 times! 😂 Do you add any Sika when you drill through the transom plate and screw it?

@gashopperinc 8 месяцев назад

Not sika, I put just a dab of 3m 4200 over the hole before I did the final assembly to seal the wood from any water intrusion.

@benjaminchavez3970 11 месяцев назад

Does the bottom of the transom board necessarily need a yoke? In looking into refebishing or building a new transom for a zodiac mark 2 2003. Thanks for the advice and how to. You do a good job.

@gashopperinc 11 месяцев назад

It is preferred so you can get a good seal with the factory fabric hull shape. Unless you are modifying the fabric hull, it's best to rebuild what's already there.

@danielhaglund244 Год назад

Great video! Is that a long shaft transom on the Mark 1? Please make a video on how to make the new transom. I would like to have a long shaft transom on my Zodiac Futura Mark IIc. It is currently short shaft transom.

@gashopperinc Год назад

No, still a short shaft. Client just wanted the bottom profiled slightly different. But I do have a video posted already on transom building. It's in the 70 Grand Raid Restoration video 3 part series.

@ollyit Год назад

Superb work, roughley how many hours did it take you to do this transom install And cleanup please

@gashopperinc Год назад

It's about 3 full work days. Depending on the boat, can be longer or shorter depending on the cleanup and what needs to be reglued back.

@NadirOutdoorDynamics Год назад

great video, what is the futura mad eof? Hypalon or PVC?

@gashopperinc Год назад

They are made of PVC fabric

@user-ys1nk4ri4e Год назад

Great job! What is the name of the glue you are using?

@gashopperinc Год назад

I used either Zodiac's Z7096 or Stabond UK-148 Glue for these repairs, not sure which I used for this boat, but those are the 2 I used to do jobs like these.

@tyfab6288 9 месяцев назад

Hey this is so good! Thanks so much for doing this. I have a surfsea inflatable boat and the side fitting seems to be in rubber but I can’t seem to know… if I prime it with hypalon glue even if the side fittings are pvc or rubber, will it still stick properly? I will be using Polymarine PVC 2 parts

@gashopperinc 9 месяцев назад

I would recommend a 2 part PVC glue if the rubber mounts are made of PVC. The only time Hypalon Glue works for rubber, is EPDM rubbers. All other have a a hard sticking with Hypalon Glue.

@tyfab6288 9 месяцев назад

@@gashopperinc Right ok! Amazing thanks!

@OSINOWOOlatunji 24 дня назад

The name of the PVC glue please

@amsterdamrico 11 месяцев назад

Do you have some advice if my transom came loose but doesnt have a reaal flat wooden service abynoor. The wooden transom has some little varnish chunks broken of from the wood.How many layers of gleu do you use?

@gashopperinc 11 месяцев назад

If the transom is damaged in any way, I would suggest replacing it. Reason for it, any questionable areas glue may not stick, or just come away. Minimum 2 layers of glue, sometimes 3, depending on the manufacturer directions.

@balena7498 8 месяцев назад

when is all done , how long should the bout rest beore puting on water, by the way yyou are doing good job, thank you .

@gashopperinc 8 месяцев назад

It's highly recommended to wait 72 hours for the glue to completely cure before putting in the water. But if you're stuck in a pinch, 24 hours should be sufficient.

@balena7498 8 месяцев назад

wouww ... thank you very much or your addvice, highly appreciate, Respect rom Kosovo .. @@gashopperinc

@mikebauman2338 9 месяцев назад

Where do I get the glue Amazon home Depot you think I can just use normal PVC cement glue what kind of glue works good

@gashopperinc 9 месяцев назад

The glues used are specialized glues. Can't buy them from any hardware store or Amazon. Can only get from inflatable boat shops that repair and sell the proper supplies. You'll want to search for and use Zodiac, Stabond or Weaver 2 part glues if doing any of these repairs. We also sell them on our website!!!

@MichOutdoors 29 дней назад

Hi, i have the same boat just got from my family. Anyways, missing some air valve caps for the side do you know part number? Or where i could order them? Thank you keep up the good work

@MichOutdoors 29 дней назад

2003 mark 1 futura

@gashopperinc 29 дней назад

Chances are you have the older style caps, which are discontinued. You will have to change over to the screw in style ones. Not sure if I have any in stock, will have to check in the morning. www.gashopperinc.com/contents/en-ca/p131_Semi-Recessed-Valve-Cap.html

@agnessabichler9519 10 месяцев назад

What glue are you using for the transom?

@gashopperinc 10 месяцев назад

In this video, I used the Stabond UK-148 Glue, but you can also use Z7096 Plastomere Glue if Stabond isn't available.

@dominikkom4307 2 месяца назад

Wich color/Material you're using for the transom? I want to replace a new one but i dont know what to take...

@gashopperinc 2 месяца назад

Not quite sure of the question your asking?!? But all our transoms are maid from high quality marine ply that's epoxy soaked and then gelcoated with a black shell.

@michiganmagneto Месяц назад

Would Coosa board work for a transom on an inflatable boat? I mean, would there be any problem with the adhesive not adhering?

@gashopperinc Месяц назад

Coose board is even better. If you have access to that, I would be using that. But since there is limited to no access to that here, or else we would be using that.

@michiganmagneto Месяц назад

@gashopperinc it's pricey, but I'm going to look into it. I can still get a few more seasons out of this transom before I get really concerned. And since I can't get a hold of the company that made this inflatable boat, it's a toyo, and order a transom I have to make my own.

@gashopperinc Месяц назад

Sometimes, the transoms you make are better than the manufacturers. We find out that the ones we make here surpass most manufacturers' pre-existing designs.