Replacing Climate Control Lights And Knobs On A 2nd Gen Tacoma 

when you removed the right knob the tiny metal spacer was still attached.... remove it and it will sit like the rest of them. you're welcome.

Just replaced my blower last night. It’s the blower motor. Only worked on high. Now it works on all settings.

My 07 Tacoma is about to hit 300K miles. I’ve had to replace the resistor once due to this issue after getting tired of reaching down under the passenger side to wiggle the wires to get the ac to work in slower speeds. I’m about to replace both light bulbs from the panel like you just did and likely ordering the knobs as well. Everyone tells me to get a new truck already but I just can’t part ways with my old truck, it’s been so good to me after years of abuse.

Thank you for the video and instructions. I replaced my Climate Control bulbs and knobs yesterday and they are a 100% improvement. The replacement went as pictured in the video. Very much appreciated.

Upgraded nobs Change the entire Look and man that looks good

If off or high are the only options Then the Blower motor Resistor Went bad It's a common issue on all vehicles when nothing but high works 6:00

Great video , thanks for the hints , I had that problem .

I might do that mod

The cable is usually fried i rewired mine and works perfectly fine now ac on all settings

The pins are loose inside the Blower motor resistor they get extremely hot which is why there in inside the Blower Box

I had the same problem with my fan speed and I'm pretty sure it was a resistor.

Can you give more info on those knobs? Very informative video..

This video was great, I want that touch screen😭

This is good info bud I've seen other vehicles where that larger one is usually the temperature turn knob maybe 🤷‍♂️

Taco Time, good work!

Thanks, I placed an order.

Can you send a link for the bulbs and controls?

I did this on my truck like 3 years ago. I replaced it with blue lights, and the same nobs

How many miles on your Tacoma when the resister started to fail? I ask because I just bought a "15 Sport with only 7k miles on it.

I messed around with my radio and now it turns on but no sound. Did I accidentally pull out a wire? If so do you know which one?

That pry tool? Never seen one before, where can that be found?

The resistor will burn up and I found it's better to change it out for about $30.

Hello Tim, do you know if it's possible to have that style of knob (or anything else really!) on a 4th gen 4runner?

Wanna send me 2 of those bulbs lol