I couldn't find anything online to help me with this repair so I made a video to help you with yours.
Start by unplugging your appliance. On the top of the back of the stove you will find 9 black screws, (3 on either side and 3 in the center) remove all but the center bottom screw, remove black vent strip then put back the two bottom outer edge screws to continue holding silver panel.
Remove the door by folding the two latches down on the hinges then placing the door in the half open half closed position and pulling straight up.
Remove the 3 silver screws under the display.
lift upward on the display assembly about an inch or two (you'll fill it release) then gently pull outward being careful not to snag wires (you will get some resistance) this will expose your next 2 screws.
Once out hang it on the 2 silver brackets at its base.
remove the 2 black screws on either side holding the glass top.
Carefully lift front of glass getting a stick to prop it up.
Remove 4 screws under glass to disconnect the burners.
pull off the glass top and lay it upside down, remove 4 screws holding vents and vent strip, put them on your new glass.
now just do everything again but in reverse.
I hope this helped at least one person not deal with the headache I did.
let me know....
13 окт 2024
