Y'all are brave as hell wrenchin on an almost 7k truck on those ramps....😂 Real faith in God type stuff. Seriously, great video. Good stuff. "Is that expertly installed? Nah, but it's in there...." LOL well done gentlemen.
Any update bub I just sprayed the hell under my truck with break cleaner and I think I’m in the same boat no oil leaking around the oil pan except for the back where the tranny connects to the bell housing
This is no simple task. I had it done under warranty. It read remove cab and disassemble motor the gaskets and Orings were staggering. The crank has to be lowerd. This is not an external seal.
Its pretty much a complete disassemble. The rear seal goes around the crank between the block and the rear of the crank the bottom is pressed in with the oil pan but you have to loosen the crank shaft to get the upper part of the seal in its journal then retork the crank mains dont know of another way to describe this those other rubber seals are just oil seals
Ok bub I got one more question sorry about all these questions but was there 6 bolts on the torque converter just dropped the tranny and looked at the bolts and there’s 8 bolt but I only took 6 nuts off
I see you did not put the required gray ford silicone on the top of the cover and in the middle. You scraped it off. But didn't replace it. Hopefully it doesn't leak again.