Replacing seals on SeaStar hydraulic steering with inexpensive Amazon seals @amazon @WestMarineInc

Подписаться 937

Просмотров 23 тыс.

50% 1

My seals on my SeaStar hydraulic steering were leaking, so I replaced them with inexpensive Amazon ones! They work just as good and are less than half the cost! These are easy enough to do and you will save a ton of money, so don't be afraid to give it a shot.
This is the seal kit that I bought.
E-cowlboy Steering Support Bracket Puller & #HS5157#HS5167 Front Mount Hydraulic Steering Cylinder Seal Kit fits for Seastar Uflex, HC5341 HC5348 HC5358 HC5365 HC5375 HC5394 HC5445 HC6750 HC6755 a.co/d/5hLS0g2
this is the bleeder hose....
Boat Bleed Tube with Bridge Tube Fits for Seastar Hydraulic Steering Systems Hydraulic Steering Filler Kit a.co/d/4ChIrKV
Check out my Facebook page
www.facebook.c...
My Instagram..
...
The bait I used to catch pinfish
Fishbites E-Z Shrimp - Longer Lasting a.co/d/21rxAhb
The type of dehooker that I use...
Ultra Aluminum Hook Removal Fishing Tool, Freshwater and Saltwater Dehooker Extractor a.co/d/3FWiAbC
My pliers.
www.dancoplier...
The rods I use.
www.ohero.com/...
The reels I use.
www.ohero.com/...
The line that I use.
www.ohero.com/...
My trolling motor.
shop.motorguid...
The power pole.
power-pole.com...
I run a 24' Kenner center console bay boat with a Suzuki DF200.
I'm always looking for ideas on videos, so please let me know if you have any video ideas.
Don't forget to like and subscribe.
If you want to book a trip, all of my contact information is on my website.
www.maskedmanfishing.com
Thanks for watching!!

Хобби

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@Blukiz_pr 22 дня назад

Awesome video ! I will be doing this to my 2301 striper . Thank you 🙏🏽

@maskedmanfishing 20 дней назад

Thanks!

@bandydecker624 Месяц назад

Is that a fishmaster bay boat? It looks identical to mine. Same engine, same everything it looks like

@maskedmanfishing Месяц назад

It is! Thanks for watching!

@Serrano46571 4 месяца назад

Thank You for this video. I was going to pay someone to do this because I was afraid it would be to hard, but after watching your video, it looks like it's pretty simple. Thank You again. Can't wait to get it done.

@maskedmanfishing 4 месяца назад

No problem at all! Thanks for watching.

@218Walleye 2 месяца назад

Well done. From one fisherman to another, really appreciate this.

@papanurgle9015 4 месяца назад

I bought one of these kits and the bridge fittings leaked like crazy. Got it from Amazon but they couldn't keep a seal at all. The part on helm was okay though

@maskedmanfishing 4 месяца назад

I guess I got a good one. It's still working great!

@travistravis8954 3 месяца назад

Appreciate the video. Once the parts come in I’m going to tackle this project. My seastar is 11 years old and first time to leak. I did purchase better seals from five star marine.

@maskedmanfishing 3 месяца назад

It's easy to do for sure! Thanks for watching!

@DIYglenn 6 месяцев назад

I like that idea. Takes a longer time to get all the bubbles out, but you don’t waste any fluids by bleeding. Having to have a container and filter back etc, it’s just a hassle.

@luc7545 Год назад

thanks for your Video. Very handy information. I have a twin 140 HP Suzuki and I need to do the same work. what is the part number you used. Regards from the Republic of Panama.

@maskedmanfishing Год назад

The seals are from Amazon. Here is the link, and thanks for watching! E-cowlboy Steering Support... www.amazon.com/dp/B085ZJST2D?ref=ppx_pop_mob_ap_share

@brianbonner8069 Год назад

Thank you for the great instructional video. I have the same steering system on my boat and it doesn't need maintenance right now, but when it does I can do this on my own thanks to you!

@maskedmanfishing Год назад

Thank you for watching! It's easy enough to do, and you'll save a ton of money doing it yourself!

@mariaf7174 Год назад

How are the seals from Amazon holding up. I was thinking of ordering some too.

@maskedmanfishing Год назад

So far so good! I use it several times a week in salt water too. Thanks for watching!

@offdutycharterstx3898 8 месяцев назад

Great Job, Thank You. I did my bay boat a few years ago and used a Marine Tech Tools Pin Wrench that worked great to unscrew the seals. The Tool is expensive but well made. Re visiting this issues as I need to now fix the seals on my offshore boat. Thanks again.

@maskedmanfishing 8 месяцев назад

Thanks for watching! The cheap tool worked, but I can definitely see the need for a good one.

@sg15 Год назад

Great video thanks. Was wondering if I may need to do this since I’m always turning the wheel to keep it straight. Bled the system twice and don’t see any leaks. Your thoughts?

@maskedmanfishing Год назад

I doubt it. If it's leaking you will see the oil somewhere.