I'm needing to replace my Waterway 5hp, 3722021-13 with wet end #310-1510. Seems as if it's an easy install, however, what seal "kit" will I need for this? I'm in Costa Rica, having a friend bring the wet end, so, I don't want to get this wrong (no parts here for Waterway pumps). Any help/advice is appreciated. thx
Typically loud noises originate from the motor bearing(s). If the shaft seal in the wet end has been leaking for a while water can get into the bearing at the wet end and that bearing can start to get loud.
I have a dreammaker spa waterway pump model number sp-10-2n11cc would these parts be compatible With my pump? It is leaking and the seals need to be replaced I would appreciate any help anyone can give me thank you
There should be a part number on the Waterway label that starts with 3420.... we would need that complete P/N and also the first 5 digits of the Waterway serial number on the pump. Water has 2 different styles of seals for your pump model, one style for pumps made before 2012 and a different style for pumps made after 2012. The serial # helps identify the year it was made.
No mention of the slinger that was included in the rebuild kit. The slinger is very loose fit on the shaft compared to the rubber slinger typically found on most motors.
If the part number on the back of the volute is 315-1220 then no seal o-ring is required as it's not designed for an o-ring. Only the volutes with the P/N 315-1260 on the back are designed for and require the seal o-ring.
