Replacing the Wheel Bearings on a Lamborghini Huracan

Подписаться 89 тыс.

Просмотров 6 тыс.

50% 1

Our 2017 Lamborghini Huracan LP580-2 needed to have it's rear wheel bearings replaced. It's not a terribly complicated procedure, but it does take a lot of ugga-duggas to get those axle bolts off! The bearings are relatively expensive so doing it yourself would save a lot of money.
This Lamborghini Huracan is for sale at NG Supercars and is VIN ZHWUC2ZF6HLA05722. www.ngsupercars.com
___________________________________________________________
Visit our dealership, NG Supercars to buy or sell your supercar with us
www.ngsupercars.com
You can contact us at sales@ngsupercars.com
___________________________________________________________
Check out our parts website for aftermarket exhausts, suspension, services, and merch!
www.normalguysupercar.com
Use the code ngs10 and save 10% off most items!
Email us sales@normalguysupercar.com for custom quotes.
___________________________________________________________
Join this channel to get access to perks:
Memberships: bit.ly/ngsmember
___________________________________________________________
Follow US!
Facebook: normalguysupercar
Instagram: / normalguysupercar
Twitter: / normalguysuperc
___________________________________________________________
#lamborghini #huracan #diy

Авто/Мото

Опубликовано:

18 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 102

@JW-lo2bh 2 месяца назад

The two best Italian mechanics on RU-vid!!

@normalguysupercar 2 месяца назад

Haha thanks

@michaelbutcher9343 2 месяца назад

Love this video. It is very relatable for anyone who does their own brakes. Crawling into the wheel well, knuckle buster hidden bolts, Jerry rigging a Pry bar with a kids scooter handlebar. Learned a new phrase too. DT

@normalguysupercar 2 месяца назад

Haha thanks

@chrisfurlough466 2 месяца назад

LOL! That Deuce Bigalow quote is in my daily rotation as well. Thanks for the laugh.

@normalguysupercar 2 месяца назад

LOL always!

@proper_miles 2 месяца назад

I appreciate seeing the real struggles. It makes me feel better about any time I hit a snag and I’m just cursing to myself for a good 30 min about some dumb bolt. It’s good to know that I’m not the problem and I’m not alone. We need a support group for bad loctite and high torque moments.

@normalguysupercar 2 месяца назад

Lol right?

@grahamweenk2573 2 месяца назад

I just did my old vw wheel bearings a month ago, almost identical process, volkswagen/audi, fun stuff!

@normalguysupercar 2 месяца назад

Yay! Lol

@auwz66 2 месяца назад

Next upgrade for the shop is a proper torque bar - a 1000Nm should be good for you guys. They are usually about 2m long and will make light work of any hub nuts on normal cars. The ones I used to use were made by Norbar.

@colelje 2 месяца назад

Get the ones we use in aviation. Its like 3m long with the cheater bar.

@normalguysupercar 2 месяца назад

We have one for centerlock wheels

@zk9964 2 месяца назад

@@normalguysupercar Should have used that one then. Sure it worked this time but when someone is using a cheater bar on top of a breaker bar it is a recipe for disaster. ie, when you're putting your body weight into it and the bar breaks and scratchs/dents your car.

@denniscorso7290 2 месяца назад

A leather mallet or a dead blow hammer will help on those rotors.

@JayDKB 2 месяца назад

I think yall do more repairs to cars you sell than major dealerships do

@normalguysupercar 2 месяца назад

Thanks!

@johndaviddeturris6997 2 месяца назад

WoW! That last part was crazy! The flex on the breaker bar was insane!!

@zachjones2346 2 месяца назад

My righty tighty would have turned into a lefty loosey

@normalguysupercar 2 месяца назад

Yeah that was nerve racking

@denniscorso7290 День назад

I have a 1 3/4" x 18" piece of chrome moly tubing in my shop for years. I've used it as an extension numerous times to break a stubborn bolt loose.

@normalguysupercar День назад

Yup gotta have a cheater bar handy

@Mrtom248 2 месяца назад

Nice car. That is seriously nuts torque and degree turn for that bolt.

@normalguysupercar 2 месяца назад

Yes it is

@toddjones9715 2 месяца назад

Green Gloves='s Hulk Smash!!! Great job guys!!!

@normalguysupercar 2 месяца назад

Lol thanks

@darrylallen4304 2 месяца назад

🎉Gotta love hubs and bearing installs! Get a harbor freight front end kit, otc hub tamer and an inductive heater for those bolts with thread compound. Always loosen the axle nut with wheel on ground. U will never get that final torque with that breaker bar. Great video.

@normalguysupercar 2 месяца назад

Thanks

@christschool 2 месяца назад

The brake rotors on this are even smaller than my RSQ8. That's not entirely surprising, considering the size and weight different, but steel brakes are a surprise at this price point and model year.

@normalguysupercar 2 месяца назад

Options

@yargable 2 месяца назад

I'd avoid hitting a floating rotor with a mallet like that in the future, you can knock it out of alignment with the hub resulting in a vibration when braking

@normalguysupercar 2 месяца назад

@GETUPANDGO 2 месяца назад

Breaker bars are our friends

@normalguysupercar 2 месяца назад

Yeah.

@alexsmithburg1500 2 месяца назад

Love the next noises while man n Handles those tools, lol

@normalguysupercar 2 месяца назад

Lol grunt

@donaldparlett7708 2 месяца назад

Giving new meaning to uggh dugga on a daily basis.

@normalguysupercar 2 месяца назад

Yes

@garyleibitzke4166 2 месяца назад

Now, drive the wheels off of it. 🤣

@normalguysupercar 2 месяца назад

Yup

@fundamentallybroken4194 2 месяца назад

Tip: dont use your meathooks as hammers. Ive seen many guys really mess themselves up doing that. Other than that, i hate the press in style Audi/VW wheel bearings.

@normalguysupercar 2 месяца назад

Yeah I won't it it's really tight

@johnsn10 2 месяца назад

I think white lambos are so clean looking.

@normalguysupercar 2 месяца назад

It looks pretty sharp

@GetUpFalcon 2 месяца назад

3/4" inch breaker bar is a must for axle nuts (bolts in this case). Despite being the next size up the difference between a 1/2" and 3/4" square drive is laugh out loud funny. Surprised yours didn't give way like mine did!

@normalguysupercar 2 месяца назад

Yeah we have a 3/4 torque wrench and it's silly how big it is

@keithflynn5651 2 месяца назад

It's a torque to yield bolt, I highly doubt you'll snap one. One of the bolts that we use on the engine we build is 300NM then 90 degrees. We've been having issues with the rundown recently and the bolt has withstood over 700NM of torque.

@normalguysupercar 2 месяца назад

That's crazy

@josephmccormack6910 2 месяца назад

Lambos are European muscle cars. Loud,fast and obnoxious. But fun.....been in one once. Good work and great video..... Excelsior.

@normalguysupercar 2 месяца назад

Yup

@oiygfdxssfgg 2 месяца назад

Its good you can do this kind of work yourselves.

@normalguysupercar 2 месяца назад

Yup

@MrJbipes 2 месяца назад

They're from the Audi Parts Bin. Every Audi I owned, 3 different models, had the wheel bearings go in less than 40K miles, one @30K

@normalguysupercar 2 месяца назад

Wow that's awful

@howardgore9807 2 месяца назад

Man , you & Josh will be sore man handling the breaker bar. Also I remember you saying that you won't mess with any Lamborghini again after the purple one that you had to sale.

@normalguysupercar 2 месяца назад

We were indeed sore

@bmuns6445 2 месяца назад

Do you guys follow a manual and apply the correct torque specs when tightening the bolts?

@normalguysupercar 2 месяца назад

Sometimes

@rjkdev 2 месяца назад

Can't you use heat to make it easier to get LockTite'd bolts out? Or are there too many rubber seals near where you are working?

@normalguysupercar 2 месяца назад

It seems risky

@randomperson1815 2 месяца назад

Was the lambo from Florida? I've seen exotic rentals beat to shnizz by young people renting them, and then companies trying to sell them off a premium value.

@brandonbman5921 2 месяца назад

Worse than a rental. A RU-vidr. @Huracanian3051

@normalguysupercar 2 месяца назад

Not in Florida, Ohio

@jonathankidd3023 2 месяца назад

How often do the bearings have to be replaced?

@AB-80X 2 месяца назад

Normally rarely ever. I don't know this car, but I'm guessing that it has seen some rough use, thinking burnouts and donuts as it is a RU-vidr car.

@normalguysupercar 2 месяца назад

They get replaced whenever they start making noise

@ddewit1969 2 месяца назад

Hé Dan you can get a torque wrench in digital with a setting for putting in a degree and it will make a sound and you have the desired degree you put into the torque wrench (momentsleutel) in Dutch greeting from Holland 🇳🇱

@normalguysupercar 2 месяца назад

Yes I'm aware

@shovel_head80 2 месяца назад

Built like a tractor

@normalguysupercar 2 месяца назад

Yup

@hughmann1908 2 месяца назад

Aren’t all those bolts single use? Love Lambo DIY btw!

@normalguysupercar 2 месяца назад

Yes did you watch the entire video?

@hughmann1908 2 месяца назад

@@normalguysupercar yes but didn’t you reuse the caliper bolts and the hub bolts?

@normalguysupercar 2 месяца назад

@@hughmann1908 those are reusable

@AB-80X 2 месяца назад

I believe that the GPS in the car is why it freaks out. Even when doing a burnout the car moves. Here there's no movement. For future references, check online and see if you can find the dyno mode.

@normalguysupercar 2 месяца назад

Yeah something like that

@hughmann1908 2 месяца назад

Schmee is in Austin, you should ping him and do a collab.

@normalguysupercar 2 месяца назад

Already did

@ChrisLoomisDirtFlix 2 месяца назад

wow is that normal to lose the wheel bearings at 26K... seems pretty early

@normalguysupercar 2 месяца назад

Yeah probably the burnouts and doughnuts

@cherylalbright2086 2 месяца назад

Hi guys!! So great the comment about how do the idiots, do all the burnouts? 😂😂😅 I really hope you guys are okay, and haven't washed away yet, from all the damn rain🌧

@normalguysupercar 2 месяца назад

We're good. The stream is back to normal

@Arthur-ke9vz 2 месяца назад

Does it fart like the cyber truck? Lol

@normalguysupercar 2 месяца назад

Thankfully no

@1970PMD 2 месяца назад

Just a suggestion, I am certain you can get the torque values for these cars. Torque the wheel bearings to OEM factory specs. If you did you didn't show it, and if you didn't then you should really torque it properly. I am not being a smart ass or splitting hairs. Just the proper thing to do for your future customers.

@normalguysupercar 2 месяца назад

It's fine