Resin Tray using Holographic window film, Micapowder and using Cricut Maker to cut film to fit tray.

Подписаться 1,4 тыс.

Просмотров 8 тыс.

50% 1

Hello 👋 Welcome to ‪@smurphyart-love2create268‬
Thank you for your support and remember if you like whay you have seen. Please remember to Subscribe with 🔔 and Like 👍🏼
I am really grateful 🙏 💜💜
Today, I used the Holographic window film that I used before in my Jesmonite video. I wanted to see if it worked just as well, if not better. Using the two colours of Micapowder helped to check if it is visible on both light and dark colour.
Just wow, I am so happy with the result and can not wait to use it again.
ITEMS USED -
Resin - From LetsResin
Micapowder - Miltin Crafts Mica Powders - 15 Vibrant Colours (5g/Bag) for Epoxy Resin Pigment, Wax Melts, Makeup, Lip Gloss, Candles, Bath Bombs, Nail Art, Soap & Slime www.amazon.co.uk/dp/B091KKXWY...
Tray Mould - Resin Mold, 2 Oval DIY Epoxy Mould, Used for Plate, Dish Casting, Tray Casting www.amazon.co.uk/dp/B09L5RQXS...
Window film- WAENLIR 3D Stained Glass Privacy Window Film Static Cling Non Adhesive Rainbow Decoration Film,(60x200 CM) www.amazon.co.uk/dp/B08J7QM6B...

Опубликовано:

6 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@ownsacat Месяц назад

I like both those trays. Very nice

@smurphyart-love2create268 Месяц назад

Thank you so much 😊

@lisacapers5853 Месяц назад

That is nice, l like the one with the film

@smurphyart-love2create268 Месяц назад

Thank you so much 😊

@AllysonWonderlandOfResin Год назад

Thanks for making a tray & experimenting with something unique & not a freakin coaster or sun catcher! I have bought loads of window transfer film & trying to collect every pattern. I’m in love with the whole halographic trend! Whoever figured out that it works & transfers, is a damn genius & I pay unlimited gratitude to them! I was curious about the same things & if u would remove the film or would it stay built in & then feared the air bubble problem too! U just set my little brain on fire with millions of ideas😊 Also I must say, I feel u on the whole cricket formatting confusion. I bought a Silhouette 4 & my daughter set it up for me but when I realized all the technical stuff u have to do in order to get it to cut out ur vinyl/ projects, I was completely terrified by it all. My daughter learned enough to print some t-shirts. I am also in need of someone walking me thru how to use the software step by step. Haven’t found any tutorial that explains it in a way my brain will download!

@smurphyart-love2create268 Год назад

I am so happy that I have inspired you to use your holographic film. It absolutely works amazing on resin. The Cricut is a mind boggle for me still. I have not found a good tutorial yet myself, so please let me know if you do. I am happy to share when I have also 😊 Thank you

@dittemor2 Месяц назад

Absolut stunning ❤

@smurphyart-love2create268 Месяц назад

Thank you! Cheers!

@janekimmick4923 Месяц назад

I love this! I have been wondering if the window film would work on resin and so happy I stumbled onto your video! You now have a new subscriber. 🙂

@smurphyart-love2create268 25 дней назад

Thank you so much 😊, I will be returning to resin work in the future 😁 cant wait to start 😃

@GGG.793 2 месяца назад

It always works on the docker color so much better although you can see it on the lighter color. I’ve never used the cricket machine to do this. I’ve just always carefully cut with very small shop scissors and I’ve never had a problem. I’m happy that come out for you.❤

@smurphyart-love2create268 Месяц назад

Thank you so much. I have found it quicker just to cut around the mold. Haha

@roguered706 10 месяцев назад

I have already tried this so I knew the window film would work, but I had to watch till the end to see your reaction. Totally worth it! Both pieces turned out lovely.

@smurphyart-love2create268 7 месяцев назад

Thank you, this is still one of my favourite creations 😃

@here2craftwithjoh Год назад

So excited!! I am waiting for some to arrive in the mail!!

@smurphyart-love2create268 Год назад

I love it, have fun with it and you get amazing results from it 😊

@johnetdevine8797 2 года назад

looks great... I have a few rolling trays with that plastic,, It can be re-used as well

@smurphyart-love2create268 2 года назад

This is my best pattern so far, love the effect. Thank you 😊 💓

@stefhanieinsinga-ash2093 Год назад

Love these

@smurphyart-love2create268 Год назад

Thank you so much 😊 x

@georgiastewart4479 8 месяцев назад

Shared

@smurphyart-love2create268 7 месяцев назад

Thank you so much

@Becky_lou_smuling Год назад

This is beautiful love the colours too ❤❤❤

@smurphyart-love2create268 Год назад

Thank you so much 😊

@resinbydrew741 Год назад

Hi from a new subscriber! I love this window film and your trays turned out great. i especially like the one with the holographic effect.

@smurphyart-love2create268 Год назад

Thank you so much, do love the Holographic effect. Works so much better on Resin 💜

@resinbydrew741 Год назад

@@smurphyart-love2create268 I haven't tried the holographic effect on Jesmonite yet, but I'd like to, just to compare them.

@dalemaclaren7576 Год назад

Absolutely gorgeous 😍 Thank you so kindly for sharing your wonderful talent with us all. Jennifer Maker is a wonderful funtastic cricut teacher. Please check her out. Just a Beautiful lady with a great gentle teaching manner.

@smurphyart-love2create268 Год назад

Thank you so much, I follow Jennifer and love her tips.

@nancysepic Месяц назад

GORGEOUS! One question. Which way did you lay the window cling down in the mold?

@smurphyart-love2create268 Месяц назад

I laid it with the holographic film facing up. This would allow it to transfer, when I poured the resin. Then peeled it off, when set.

@dianaschumaker4252 2 месяца назад

Does the window film have an adhesive side, and does that side stick to the mold? Then after resin cures you remove it from the resin? I’m not sure if I missed something. This turned out absolutely amazing!

@smurphyart-love2create268 Месяц назад

Exactly that, the film kinda just stuck to the mold and with the weight of the resin when pouring, it did not move. Thank you, and apologies in the reply. I have only just seen them all.

@shellyburke1501 Год назад

What side of window film do you stick to the mould to get best effect

@smurphyart-love2create268 Год назад

I place the film into the mold with the holographic side up. You want to ensure the holographic side touches the resin, as it will transfer to it. I hope this helps, 😀

@FilomenaDapaz Год назад

lm new to epoxy. how u clean your hands from epoxy and your tools ???

@smurphyart-love2create268 11 месяцев назад

Tools I use sticky tape once it has set. I should be wearing gloves. But if I do get it on my hands, hot soapy water has helped and I do use hand cream.

@darlavris 3 месяца назад

Rubbing Alcohol first, then soap and water, finish with a little hand cream. This works best. ❤

@dianechrismas6055 Год назад

I have this tray how much resin did u mix up please

@smurphyart-love2create268 11 месяцев назад

It has been a while since I have made this. I do tend to over make, and have smaller mould on standby to fill. There is a way to fill the mould with Water, then calculate what is required. Clare's crafty corner has a video on how this can be done ✅😆

@jutetwine4482 Год назад

I did this and it works too but I got bubbles impression. I took out the backing. What should I do to prevent bubbles? \

@smurphyart-love2create268 Год назад

I did press the film down onto the mold, and rubbed it to ensure it fit with no over lay. With a slight overlay, it could move you even lift. Although I did get a bubble or two in the piece x I think I shimmered it too hard lol 😆

@AcrylicArtBySharon 2 года назад

Did u adhere the film to your mold? I tried this and my resin seeped between the mold & film & encased the film. I'd love to get this to work for me. Help would be appreciated.

@smurphyart-love2create268 2 года назад

I did not, the film when placed on my mould and kinda stuck itself. The Holographic side faces upwards, so the flatter side down. I pour onto the Holographic side. It making sure you are laying the film the right way up. What film are you using? As I have only used the one type so far. I hope you manage to perfect it 💜 Let me know how you get on , or have any other questions. Good luck Sharon x

@resinbydrew741 Год назад

I'm not sure if you're using the same film as I've got but there is a backing layer on mine. Taking the backing layer off seems to give it an extra bit of sticky to cling to the mould. I've done it both ways, taking the backing layer off and leaving it on and it's not made too much difference but I was just thinking the extra bit of stickiness might help you if you've got the one with the backing layer attached.

@mariannskears1733 Год назад

Ive tried this and the window film is really stuck to the resin. I can't pull it off.

@smurphyart-love2create268 Год назад

Oh no. Did the resin cure over the lip of the film? I found it was hard to pull away on one of the edges that did this. I was happy with how this turned out. 🙂

@mariannskears1733 Год назад

I tried it again with 2 part resin and it worked. Before I was using UV resin.